Transcript
ED160 Blade Runner
ED160 Blade Runner-3
Lifting Capacities A – Reach from swing centerline for bucket hook B – Bucket hook height above/below ground C – Lifting capacities in pounds {kilogram} Relief valve setting: 4,970 psi {34.3 MPa}
Rating over front Rating over side or 360 degrees ED160 Blade Runner A
Arm: 7' 10" {2.38 m} Bucket: 0.65 cu yd {0.50 m3} SAE heaped 840 lbs {380 kg} Shoe: 23.6" {600 mm} Blade: Front side and Blade up 4' 11" {1.5 m} 9' 10" {3.0 m} 14' 9" {4.5 m} 19' 8" {6.0 m}
At Max. Reach Radius
B 24' 7" {7.5 m} 19' 8" {6.0 m} 14' 9" {4.5 m} 9' 10" {3.0 m} 4' 11" {1.5 m} G.L. -4' 11" {-1.5 m} -9' 10" {-3.0 m}
lb {kg} lb {kg} lb {kg} lb {kg} *13,300 {6,030} *13,300 {6,030} lb {kg} 14,930 {6,770} 11,550 {5,240} lb {kg} 14,170 {6,420} 10,920 {4,950} lb {kg} *12,280 {5,570} *12,280 {5,570} 14,130 {6,410} 10,890 {4,940} lb {kg} *18,720 {8,490} *18,720 {8,490} *14,010 {6,350} 11,170 {5,070}
ED160 Blade Runner A
*6,580 {2,980} *6,580 {2,980} *7,330 {3,320} *7,330 {3,320} 8,100 {3,670} 6,850 {3,110} 7,420 {3,360} 6,240 {2,830} 6,970 {3,160} 5,830 {2,640} 6,820 {3,090} 5,690 {2,580} 6,950 {3,150} 5,810 {2,630}
5,100 {2,310} 4,880 {2,210} 4,600 {2,080} 4,380 {1,980} 4,310 {1,950}
4,330 {2,010} 4,220 {1,910} 3,960 {1,790} 3,760 {1,700} 3,690 {1,670}
Arm: 9' 4" {2.84 m} Bucket: 0.5 cu yd {0.38 m3} SAE heaped 750 lbs {340 kg} Shoe: 23.6" {600 mm} Blade: Front side and Blade up 4' 11" {1.5 m} 9' 10" {3.0 m} 14' 9" {4.5 m} 19' 8" {6.0 m}
*3,360 {1,520} *2,790 {1,260} *2,660 {1,210} *2,750 {1,250} *3,040 {1,380} 3,390 {1,530} 3,860 {1,750} 5,220 {2,370}
*3,360 {1,520} 13' 8" {4.17 m} *2,790 {1,260} 18' 11" {5.77 m} *2,660 {1,210} 21' 10" {6.65 m} *2,750 {1,250} 23' 4" {7.11 m} 2,870 {1,300} 23' 8" {7.23 m} 2,930 {1,330} 23' 0" {7.02 m} 3,330 {1,510} 21' 2" {6.45 m} 4,460 {2,020} 17' 8" {5.40 m}
24' 7" {7.5 m}
lb {kg} lb {kg} lb {kg} lb {kg} *10,930 {4,950} *10,930 {4,950} lb {kg} 14,640 {6,640} 11,390 {5,160} lb {kg} 13,430 {6,090} 10,370 {4,700} lb {kg} *10,610 {4,810} *10,610 {4,810} 13,160 {5,960} 10,150 {4,600} lb {kg} *16,440 {7,450} *16,440 {7,450} 13,380 {6,060} 10,330 {4,680} lb {kg} *8,890 {4,030} *8,890 {4,030}
*3,980 {1,800} *3,980 {1,800} *5,610 {2,540} *5,610 {2,540} *3,470 {1,570} *6,290 {2,850} *6,290 {2,850} 4,930 {2,230} 7,900 {3,580} 6,700 {3,030} 4,670 {2,110} 7,150 {3,240} 6,010 {2,720} 4,340 {1,960} 6,580 {2,980} 5,500 {2,490} 4,070 {1,840} 6,340 {2,870} 5,280 {2,390} 3,940 {1,780} 6,380 {2,890} 5,320 {2,410}
*3,470 {1,570} 4,280 {1,940} 4,040 {1,830} 3,740 {1,690} 3,480 {1,570} 3,360 {1,520}
0.65 cu yd (0.50 m3) SAE heaped
At Max. Reach
2,850 {1,290}
2,460 {1,110}
*3,200 {1,450} *2,670 {1,210} *2,520 {1,140} *2,560 {1,160} *2,780 {1,260} 2,850 {1,290} 3,200 {1,450} 4,190 {1,900} *5,950 {2,690}
ED160 Blade Runner Bucket Capacity :
Radius B 24' 7" {7.5 m} 19' 8" {6.0 m} 14' 9" {4.5 m} 9' 10" {3.0 m} 4' 11" {1.5 m} G.L. -4' 11" {-1.5 m} -9' 10" {-3.0 m} -14' 9" {-4.5 m}
Hydraulic Excavators
*3,200 {1,450} 15' 7" {4.77 m} *2,670 {1,210} 20' 6" {6.26 m} *2,520 {1,140} 23' 4" {7.11 m} *2,560 {1,160} 24' 9" {7.56 m} 2,430 {1,100} 25' 2" {7.68 m} 2,450 {1,110} 24' 6" {7.48 m} 2,750 {1,240} 22' 9" {6.94 m} 3,570 {1,610} 19' 6" {5.95 m} *5,950 {2,690} 13' 10" {4.22 m}
Engine Power :
92.8 hp (69.2 kW) / 2,000 rpm (SAE NET) Operating Weight :
35,200 lb (15,900 kg)
1. Do not attempt to lift or hold any load that is greater than these lift capacities at their specified lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities. 2. Lift capacities are based on machine standing on level, firm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc. 3. Bucket lift hook is defined as lift point. 4. The above lifting capacities are in compliance with SAE J/ISO 10567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load. 5. Operator should be fully acquainted with the Operator’ s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times. 6. Lift capacities apply to only machines as originally manufactured and normally equipped by KOBELCO CONSTRUCTION MACHINERY CO., LTD.
Standard Equipment ENGINE Engine, MITSUBISHI D04EG-TAA, Diesel engine with turbocharger and intercooler, Tier 4 interim certified Automatic engine deceleration Batteries (2 x12V - 80 Ah) Starting motor (24 V - 5kW), 50 amp alternator Automatic engine low idle for low engine oil pressure Engine oil pan drain cock Double element air cleaner CONTROL Working mode selector (H-mode, S-mode and ECO-mode) SWING SYSTEM & TRAVEL SYSTEM Swing rebound prevention system Straight propel system Two-speed travel with automatic down shift Sealed & lubricated track links 2’ 0” {600 mm} track shoes Grease-type track adjusters Automatic swing brake
DOZER BLADE Tilt & angle CAB & CONTROL Two control levers, pilot-operated Horn, electric Integrated left-right slide-type control box Cab light (interior) Coat hook Large cup holder Detachable two-piece floor mat 7-way adjustable suspension seat Retractable seatbelt Headrest Handrails Heater and defroster Intermittent windshield wiper with double-spray washer Skylight Top guard Tinted safety glass Pull-type front window and removable lower front window Easy-to-read multi-display monitor Automatic air conditioner Emergency escape hammer
Radio, AM/FM Stereo with speakers Travel alarm Drain pressure switch DPF regeneration switch 12V converter KOMEX Three rear view mirrors
Optional Equipment Boom & arm holding valve Front-guard protective structures (May interfere with bucket action) Additional hydraulic circuit Control pattern changer (2-way) Cab additional light Rain visor (may interfere with bucket action) Three front working lights Vandalism guards Delete dozer blade Note: Standard and optional equipment may vary. Consult our KOBELCO dealer for specifics.
Note: This catalog may contain attachments and optional equipment that are not available in your area. It may also contain photographs of machines with specifications that differ from those of machines sold in your area. Please consult your nearest KOBELCO distributor for those items you require. Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice. Copyright by No part of this catalog may be reproduced in any manner without notice.
Inquiries To: 22350 Merchants Way Katy, TX 77449 http://www.KOBELCO-USA.com/ Complies with the latest exhaust emission regulations
US EPA Interim Tier IV
EU (NRMM) Stage III B
Japanese Regulations
ED160 Blade Runner
Dual Purpose from the Start!
The Revolutionary Integrated Noise and Dust Reduction Cooling System
Productive Digging and Large-Capacity Dozing Fit a hydraulic excavator with a large, tilt-angle dozer blade for great performance both digging and dozing—that’s the ED160 Blade Runner. Using one machine to cover a whole range of jobs including leveling, digging, pipe laying and backfilling, gives a massive boost in productivity. The tilt-angle blade allows leveling and backfilling on irregular ground. And the ED160 Blade Runner features the short rear swing SR spec that means the operator can get on with the job in the tightest spaces without worrying about what’s behind. The ED160 Blade Runner has built-in strength to deal with the double tasks of dozing and digging. Its iNDr noise and dust control system cuts engine noise and simplifies maintenance. Add to that a well-equipped, comfortable cab. Giving fast, efficient digging and large capacity dozing, this one machine is versatility itself on site.
iNDr Pursuing the“Three E’s” The Perfection of Next-Generation, Network Performance
KOBELCO’s exclusive iNDr Cooling System delivers amazingly quiet operation.
“Ultimate”-Low Noise Level of
Enhancement Greater Performance Capacity
Economy Improved Cost Efficiency
Environment Features That Go Easy on the Earth
“Ultimate Low Noise” Design Minimizes Sound Leakage KOBELCO’s unique iNDr system achieves exceptional results preventing engine and cooling fan noise escaping the engine compartment. This “Ultimate Low Noise” machine cuts noise to 75 dB (A) at 1.5 m, far surpassing legal requirements. Structural Diagram Intake air passes through iNDr filter Exthaust outlet
Strategically placed insulation cuts noise
Engine compartment sealed except for intake and exhaust ports
Offsetting intake and exhaust ports eliminates direct escape of sound, further reducing overall noise.
Eliminating Dust Optimizes Cooling Performance The high-density 60-mesh filter* removes dust from the air intake, which prevents clogging of the cooling system and air cleaner, and maintains the engine at peak performance. Its wave form concentrates dust in the grooves, keeping a clear passage for a smooth flow of air. 1
* “60-mesh” means 60 holes per square inch.
How the filter catches dust
2
ED160 Blade Runner
Efficient Performance Large Capacity Dozing
6-way Dozing Capability
Top-Class Powerful Digging
ED160 Blade Runner is fitted with a large dozing blade 10’ 8” (3,260 mm) wide and 2’ 8” (815 mm) high, and can readily shift large volumes of earth, working to a height of 2’ 7” (790 mm) and a depth of 24” (600 mm). With 32,600 lbf (145 kN) of drawbar pulling force, the ED160 has the power to doze and backfill in all recommended operating positions.
In addition to powerful digging and fine capability, the new ED160 Blade Runner offers a standard 6-way dozer blade and foldable, lockable blade wings that the clearing path beyond the width of tracks.
Dimensions:
A conveniently located single dozer lever controls all blade hydraulic function.
10’ 8” (3,260 mm) (width) x 2’ 8” (815 mm) (height)
Single Dozer Lever Tilt Right
Working Ranges:
Angle Right
Drawbar Pulling Force: 44,063 lbf (196 kN)
Angle Left
2’ 7” (790 mm) (height), 24” (600 mm) (depth) Dozer Capacity: 2.1 cu yd (1.6 m3)
Max. Bucket Digging Force: 20,300 lbf {90.1 kN} (ISO 6015) 19,700 lbf {87.8 kN} (SAE J 1179) Max. Arm Crowding Force: 14,500 lbf {64.4 kN} (ISO 6015) 14,000 lbf {62.3 kN} (SAE J 1179)
Great Swing Power, Short Cycle Times Blade Up
Blade Down
Compact design ensures efficient operation on sites where space is limited.
Tail overhang:
7.7" {195 mm}
Powerful swing power and top-class swing speed.
Swing Speed: 11.0 min-1 {rpm}
Float control Tilt Left
Exclusive Dozer Circuit The dedicated dozer circuit has a relief valve setting of 3,970 psi (27.4 MPa). Steady and powerful dozing is unaffected by digging, swinging, travel or other machine function.
Curved Track Shoes Power, Angle and Tilt Capability (PAT)
For More Efficient Performance
Compact Swing Radius
The curved shape of the crawler shoes improves maneuverability with good grip and gives crisp travel minimizing damage to ground surfaces.
The 6-way dozer blade has Power, Angle and Tilt capability (PAT) operated from the cab. With a single control lever, the blade can be angled 25 degrees to the left or right for dispensing earth and materials away for the operator’s path. The blade also tilts up on the left and right sides by 1’ 6” (455 mm) for slope grading, culverts and ditches.
Swing Torque: 29,400 lb-ft {39.9 kN}
Optional N&B (Crusher and Breaker) The operator selects the desired mode from inside the cab, and the selector valve automatically configures the machine accordingly .
Seamless, Smooth Combined Operations The machines have inherited the various systems that make inching and combined operations easy and accurate, with further refinements that make a good thing even better. Leveling and other combined operations can be carried out with graceful ease. • Electronic active control system • Arm regeneration system • Boom lowering regeneration system • Swing priority system • Swing rebound prevention system
Easy Transportation Plenty of Ground Clearance Excellent ground clearance ensures unhindered travel.
Dozer wings fold back to reduce blade width from 10’ 8” (3,260 mm) to 8’ 1” (2,460 mm). With a track width of 8’ 6” (2,590 mm) and weight of 35,200 lbs (15,900 kg), drive the ED160 onto a tag-a-long trailer and you’re off to the job site.
Ground Clearance: 1’ 8” (455 mm) 3
4
ED160 Blade Runner
More Work with Less Fuel! Interim Tier 4 Compliant Engine (No Exhaust Fluid Required)
Automatic Acceleration / Deceleration Function Reduces Engine Speed
Common rail system High-pressure injection atomizes the fuel, and injection timing is more precise, improving combustion efficiency.
Engine speed is automatically reduced when the control lever is placed in neutral, effectively saving fuel and reducing noise and exhaust emissions. The engine proportionally returns to the previous speed when the lever is moved out of neutral.
Lever Off (Neutral) Engine Speed
PM emissions cut: Limits creation of particulate matter (which results from incomplete combustion of fuel)
Attachment Mode Selector Switch
4 seconds
Lever On
There is a choice of three different attachment modes, to accommodate bucket, crusher, or breaker. The desired attachment mode can be selected with a switch, which automatically configures the selector valve. All attachment modes can be used in S-mode, H-mode or ECO-mode.
NEXT-3E Technology
New Hydraulic System Reducing Pressure Loss Increased piping diameter
Using low-pressure couplers
Lever Stroke
Rigorous inspections for pressure loss are performed on all components of the hydraulic piping, from the spool of control valve to the connectors. This regimen, combine with the use o f a n e w , h i g h efficiency pump, cuts energy loss to a minimum.
Diesel Particulate Filter (DPF) Carbon is built up as soot on the diesel particulate filter and is burned off at high temperature. No Exhaust fluid required. The system allows manual or automatic filter regeneration.
NEXT-3E Technology
PM PM PM
PM PM
Filter
NOx emissions cut: Reduces nitrogen oxides (created by reaction with oxygen at high temperature) While ensuring sufficient oxygen for combustion, cooled exhaust gases are mixed with the air intake and re-circulated into the engine. This reduces the combustion temperatures and reduces formation of Nitrogen Oxides.
Air intake Exhaust Water-cooled EGR
Electronic control EGR valve
EGR cooler
ECO-mode H S E
Total Tuning Through Advanced ITCS Control
Platinum catalyzer
Work modes for a closer match to the job at hand. An addition to the existing H-mode and S-mode, the new ECO-mode saves even more energy.
The next-generation engine control is governed by a new version of ITCS, which responds quickly to sudden changes in hydraulic load to ensure that the engine runs as efficiently as possible with a minimum of wasted output. ITCS (Intelligent Total Control System) is an advanced, computerized system that provides comprehensive control of all machine functions.
NEXT-3E Technology
Next-Generation Electronic Engine Control The high-pressure, common-rail fuel-injection engine with the multiple injection system features adjust table control to maximize f u e l e ffi c i e n c y a n d p r o v i d e powerful low-speed torque. The result is a highly fuel-efficient engine.
H-mode: For heavy duty operation, when a higher performance level is required. S-mode: For normal operations with lower fuel consumption. ECO-mode: Puts priority on low fuel consumption and economic performance.
Significant Extension of Continuous Working Hours The combination of a large-capacity fuel tank and excellent fuel efficiency delivers an impressive increase in the length of continuous usage. 5
Fuel tank capacity:
52.8 US gal (200 L)
6
ED160 Blade Runner
Cab Design That Puts the Operator First ROPS Cab
Big Cab The big cab provides a roomy operating space with plenty of legroom, and the door opens wide for entry and exit. As well as giving a wide, open view to the front, the cab has increased window areas on both sides and to the rear, for improved visibility in all directions.
The newly developed, ROPS (Roll-Over-Protective Structure)-compliant cab clears ISO standards (ISO-12117-2: 2008) and ensures greater safety for the operator.
Excellent Visibility Taking out the right-side cab support to make a single window has improved visibility to the right.
• Level 2 FOPS Guard (ISO 10262) is equipped as standard. • To fit vandalism guards, please contact your KOBELCO dealer. (Mounting brackets for vandalism guards provided standard)
Multi-Display Color Monitor for Easy Checking An LCD multi-display color monitor is fitted as standard. Operations data as well as the full range of machine status data can readily be checked.
• Fuel consumption • Maintenance
Wide-Access Cab Aids Smooth Entry and Exit
Comfortable Operating Environment
KOMEX (Excavator Remote Monitoring System)
Safety Features
Total Support for Machines with Network Speed and Accuracy
Easy entry and exit assured with wider cab entry and safety lock lever integrated with mounting for control levers.
• One-touch lock release simplifies opening and• Powerful automatic air conditioner closing front window
Our “KOMEX” allows you to use the Internet to manage information from your office for machines operating in all areas. Be prepared for any problems with strategic information and cost management. This provides a wide range of support for your business operations.
Direct Access to Operational Status
• Two-speaker FM/AM radio with station select • Spacious luggage tray
• Machine Maintenance Data
Security System • Large cup holder
• Dozer control lever
• Engine Start Alarm • Area Alarm
• Thermal guard prevents contact with hot components during engine inspections
• Retractable seatbelt requires no manual adjustment
• Hammer for emergency exit
• Travel alarm
• Swing flashers
• Rear view camera
GPS
• Location Data • Operating Hours • Fuel Consumption Data • Graph of Work Content • Graph of Machine Duty Cycles
Maintenance Data and Warning Alerts
7
• Rearview monitoring
Base station
Hydraulic excavator Web server
KOBELCO service personnel/dealer/customer
8
ED160 Blade Runner
Fast, Accurate and Low-Cost Maintenance Comfortable “On the Ground” Maintenance Most daily inspection and regular maintenance tasks can be easily implemented with ready access on the ground. • Easy access to cooling units (Left side)
• Easy access to engine (Center)
Working Ranges
Specifications iNDr Filter: Visual Checking and Easy Cleaning When checking and cleaning the cooling system, one must deal with several different components like the radiator, oil cooler and intercooler, which all must be handed in different ways. But with the iNDr filter, there’s just one filter in one place. If it looks dirty during start-up inspection, it can be cleaned easily and quickly.
PERFORMANCE MODEL Bucket Capacity
SAE heaped Struck
Swing Speed Swing Torque Travel Speed Gradeability Bucket Digging Force Arm Crowding Force Drawbar Pulling Force WEIGHT Operating Weight Ground Pressure Shoe Width ENGINE Model
cu yd {m3} cu yd {m3} min-1 {rpm} lb-ft {kN} mph {km/h} % {degree} lbf {kN} lbf {kN} lbf {kN}
Radiator reservoir tank
• Easy access to pump & filters (Right side)
Hydraulic pump
Fuel pre-filter
• Easy access to main control valves (Front)
Fuel Filter
• Independent Dozer control pump is provided.
Monitor Display with Essential Information for Accurate Maintenance Checks Displays only the maintenance information that’s needed, when it’s needed. Self-diagnostic function that provides early-warning detection and display of electrical system malfunctions. Record function of previous technical issues including irregular and transient malfunction.
Fast Maintenance
Reliable Construction Attachment • Engine quick drain cock can be turned without tools.
• Hour meter can be checked while standing on the ground
The attachment has been reinforced to handle a higher work volume, with greater power and excellent durability that can withstand demanding work conditions.
Understructure • Easy-access fuse box. More finely differentiated• Washer fluid tank located under the cab fuses make it easier to locate malfunctions. floor mat.
Easy Cleaning
Over size travel motors and heavy duty undercarriage enhance durability. Heavy-duty idlers, lower rollers and carrier rollers are all lifetime lubricated for dependability and a long trouble-free working life.
Rated Power Output Max. Torque
h
(SAE NET) HP {kW} (without fan) HP {kW} (SAE NET) lb-ft {N•m/min-1} (without fan)lb-ft {N•m/min-1} cu in {L}
Displacement HYDRAULIC SYSTEM Pump Max. Discharge Flow US gph {L/min} Relief Valve Setting (main) psi {MPa} Swing Motor Travel Motor DOZER BLADE Dozer Capacity cu yd {m3} Width x Height ft-in {mm} Working Ranges (height/depth) ft-in {mm} Max. Tilt Height ft-in {mm} Angle degree REFILLING CAPACITIES & LUBRICATION Fuel Tank US gal {L} Cooling System US gal {L} Engine Oil US gal {L} Travel Reduction Gear US gal {L} Swing Reduction Gear US gal {L} Hydraulic oil tank (System) US gal {L}
8 7 6
35,200 {15,900} 6.09 {42} 2' 0" {600}
Arm length A Overall length B Overall height (to top of boom) C Overall width of crawler D Overall height (to top of cab) E Ground clearance of rear end* F Ground clearance* G Tail swing radius H Tumbler distance I Ovrall length of crawler J Track gauge K Shoe width L Overall width of upperstructure M Overall width N Folding blade width
1 0 1
i
2
c jg
3 4 5 9m8
7 6 5 4
3 2 1m 7' 10" {2.38m} Arm
Boom Arm a- Max. digging reach b- Max. digging reach at ground level c- Max. digging depth d- Max. digging height e- Max. dumping clearance f - Min. dumping clearance g- Max. vertical wall digging depth h- Min. swing radius i - Horizontal digging stroke at ground level j - Digging depth for 8 feet flat bottom Bucket capacity SAE heaped cu yd{m3}
2.1 {1.6} 10' 8" {3,260} x 2' 8" {815} 2' 7" {790}/24" {600} 1' 6" {445} 25 52.8 {200} 3.7 {14} 4.9 {18.5} 2 x 0.6 {2.1} 0.4 {1.65} 22.5 {85.2} (33.5 {126.7}) Unit: ft-in {mm} 9' 4" {2.84 m} 28' 3" {8,620} 10' 3" {3,130} 8' 6" {2,590} 9' 11" {3,030} 3' 4" {1,010} 1' 8" {455} 4' 11" {1,490} 9' 2" {2,800} 11' 10" {3,600} 6' 6" {1,990} 2' 0" {600} 8' 2" {2,490} 10' 8" {3,260} 8' 1"{2,460}
6m 9' 4" {2.84m} Arm
Unit: ft-in {m} 15'4"{4.68m} 7' 10" {2.38m} 9' 4" {2.84m} 27' 4" {8.34} 28' 10" {8.78} 26' 9" {8.16} 28' 3" {8.61} 17' 7" {5.36} 19' 1" {5.82} 30' 8" {9.34} 31' 10" {9.71} 22' 8" {6.90} 23' 10" {7.26} 9' 0" {2.74} 7' 10" {2.38} 15' 6" {4.73} 17' 4" {5.29} 6' 7" {2.00} 7' 10" {2.40} 13' 11" {4.23} 15' 6" {4.72} 16' 10" {5.13} 18' 6" {5.63} 0.65 {0.50} 0.50 {0.38}
Bucket Selection Chart Capacity (SAE) cu yd {m3} 0.30 {0.229} 0.44 {0.336} 0.58 {0.443} 0.73 {0.558} 0.88 {0.672} 0.30 {0.229} 0.44 {0.336} 0.58 {0.443} 0.73 {0.558} 0.88 {0.672}
Bucket Duty
General
Heavy Duty
Width in {m} 18 {0.457} 24 {0.609} 30 {0.762} 36 {0.914} 42 {1.066} 18 {0.457} 24 {0.609} 30 {0.762} 36 {0.914} 42 {1.066}
Bucket Weight lb {kg} 650 {296} 720 {327} 835 {379} 905 {411} 1,015 {460} 705 {320} 780 {354} 900 {408} 975 {442} 1,090 {494}
Arm 9' 4" {2.84 m} H H M L L H H M L X
H: Used with material weight up to 3,000 lb/cu yd (1,780 kg/m3) M: Used with material weight up to 2,500 lb/cu yd (1,483 kg/m3) L: Used with material weight up to 2,000 lb/cu yd (1,186 kg/m3) * without including height of shoe lug. X: Not recommended
L
• Detachable two-piece floor mat with handles • Internal and external air conditioner filters can be for easy removal. A floor drain located under floor mateasily removed without tools for cleaning B
D
A
H I
F
E
9
3 2
Two variable displacement pumps + two gear pumps 2 x 34.3 {130}, 5.3 {20}, 14.5 {55} 4,970 {34.3} Axial piston motor 2 x axial piston, two-step motor
7' 10" {2.38 m} 28' 0" {8,530} 8' 10" {2,700}
4
f
G
• Special crawler frame designed is easily cleaned of mud
5 e
MITSUBISHI D04EG-TAA Direct injection, water-cooled, 4-cycle, 4-cylinder, turbocharged diesel engine, intercooler, Tier 4 interim certified 92.8 {69.2}/2,000 99.2 {74}/2,000 265 {359}/1,600 277 {375}/1,600 203.3 {3.331}
Dimensions
10 m 9
d lbs {kg} psi {kPa} ft-in {mm}
Type Air cleaner
a b
ED160 Blade Runner-3 0.65 {0.50} 0.50 {0.38} 11.0 29,400 {39.9} 3.0/1.5 {4.8/2.4} 70 {35} 20,300 {90.1} (ISO 6015), 19,700 {87.8} (SAE J 1179) 14,500 {64.4} (ISO 6015), 14,000 {62.3} (SAE J 1179) 44,063 {196} (SAE 1309)
K
J N C M
10
