Preview only show first 10 pages with watermark. For full document please download

Edco Shp Series Installation Manual (io

   EMBED

Share

Transcript

Surge Protection For Business-Critical ContinuityTM Edco SHP Series 120 VAC and 240 VAC Single Phase Modular Filter The Edco SHP Series hybrid design exhibits performance levels unattainable with simple “shunt type” protectors. The two active clamp stages, large inductor and shunt capacitance effectively halt high rate-of-rise surge waveforms, thus preventing initial voltage overshoot. Flexibility of installation is another design feature of the Edco SHP Series. The protector first and second stages are electrically separate (line side) for use in jurisdictions that require a line filter between stages. In addition, the first stage provides protection from MAIN NEUTRAL to GND as well as MAIN LINE to GND. This is an often overlooked feature which becomes significant in locales where NEUTRAL must be kept separate from earth ground inside the cabinet. Features General Technical Specifications Part Number SHP300-10 SHP400-10 Operating Voltage 120VAC 240VAC Clamping Voltage 395VAC 650VAC Operating Current 10A Peak Surge Current 58.5kA (8 x 20 µs) Operating frequency 47-63Hz EMI Attenuation 70 dB typ SPD Technology MOVs w/L-C Filter Modes of Protection L-N, L-G, N-G Status Indication NA Connection Type 1/4-20 & 10-32 SS Stud Operation Temperature Dimensions (Inches) Weight -40°C to +85°C 1.8H x 2.875W x 5.3L 1 lb Multi-stage hybrid design Incorporates series choke 120 VAS and 240 VAC Single Phase Nanosecond Response Time Blocks High Energy Surges 5 year warranty Installation 1. This product could become excessively hot and rupture in the rare event of power line conditions or surge that exceed its rated operating specification. Appropriate precautions should be exercised. 2. High voltages are present on electrical termination. Unit should be serviced by qualified personnel only. Mounting Emerson Network Power. The global leader in enabling Business-Critical ContinuityTM. AC Power Embedded Computing Outside Plant Racks and Integrated Cabinets Connectivity Embedded Power Power Switching & Control Services DC Power Monitoring Precision Cooling Surge Protection Emerson Network Power Contact information www.emersonnetworkpower.com/surge Headquarters Surge Protection 100 Emerson Parkway Binghamton, NY 13905 T: (607) 721-8840 T: (800) 288-6169 F: (607) 722-8713 E: [email protected] IO-50153 11/10 Rev. 0 Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2010 Emerson Electric Co.