Transcript
1 2
EdenPURE® Bladeless Tower Fan/Heater Instruction Manual
IMPORTANT SAVE THESE INSTRUCTIONS To ensure you get the best results from your Tower Fan/Heater, please read this manual first and keep it for future reference. For additional information, please call 1-800-225-6595.
Model: A5716
Thank you for purchasing our Bladeless Tower Fan/Heater. To ensure best performance, please read the instruction manual carefully before use. SAVE THESE INSTRUCTIONS
Content 1. Safety and Maintenance -------------------------------------------------------------- 3 2. Specifications ---------------------------------------------------------------------------- 4 3. Parts and Features --------------------------------------------------------------------- 5 4. Operating Instructions ----------------------------------------------------------------- 5 5. Remote Control Instructions --------------------------------------------------------- 6 6. Care and Cleaning --------------------------------------------------------------------- 7 7. Troubleshooting Guide ---------------------------------------------------------------- 8
- 2 -
Important Safety Instructions WARNING IMPROPER USE OF THIS FAN/HEATER COULD RESULT IN RISK OF FIRE, ELECTRIC SHOCK, AND INJURY TO PERSONS
WARNING ANY REQUIRED SERVICE OTHER THAN FILTER MAINTENANCE SHOULD ONLY BE PERFORMED BY AN AUTHORIZED SERVICE REPRESENTATIVE AND ANY OTHER REPAIRS ATTEMPTED BY ANYONE OTHER THAN AN AUTHORIZED SERVICE REPRESENTATIVE WILL VOID THE WARRANTY. FOR AUTHORIZED SERVICE, CALL 1-800-225-6595 OR VISIT WWW.EDENPURESUPPORT.COM
WARNING RISK OF ELECTRICAL SHOCK DO NOT OPEN NO USER-SERVICEABLE PARTS INSIDE
Safety and Maintenance
WARNING To avoid fire, electric shock or personal injury, be sure to comply with the following requirements. 1. Extreme caution is necessary when any fan/heater is used by or near children or invalids and whenever the unit is left operating and unattended. Children should be under supervision to ensure that they will not play with the fan as a toy. 2. Do not plug the tower into any other cord-connected device such as a power strip, surge protector, multiple outlet adapter, grounding adapter or outlet-type air fresheners. Plug into a 3-prong 120v 15amp or higher grounded circuit receptacle only.
Do not plug
the tower into a loose-fitting or broken receptacle. The tower is for use on 120 volt outlets. 3. Always unplug tower when not in use. Don’t move the tower until you unplug it from the outlet. 4. Don’t unplug by pulling on the cord. You should unplug and grasp the plug, not the cord. 5. Don’t operate the tower with a damaged cord or plug, or after it has been dropped or damaged in any manner.
In such cases, contact customer service to replace or repair if
it is damaged.
- 3 -
6. Don’t stretch the cord or place the cord under strain. Keep the cord away from heat sources. 7. Don’t run the cord under carpeting. Don’t cover the cord with throw rugs, runners or similar coverings. Arrange cord away from traffic areas to avoid tripping over the cord. 8. Turn off all controls before unplugging. Remove the plug from the outlet when not in use for long periods of time. To avoid a tripping hazard, safely coil the cord. 9. Don’t insert or allow foreign objects to enter the inlet grill. Don’t block the opening. Keep free of dust, lint, hair and anything that may reduce airflow as this may cause an electric shock or fire, or damage the tower. 10. Don’t use the tower outdoors, on construction sites or on wet surfaces. The tower is not intended for use in bathrooms, laundry areas or similar indoor locations. Never place the tower where it may fall into a bath or other water container. Do not use or store where it may get wet or in the immediate surroundings of a bath, a shower, or a swimming pool. 11. Don’t immerse the tower, its power cord or plug it into water or other liquids. 12. Use of extension cords aren’t recommended. 13. Don’t use in conjunction with or directly next to an air freshener or similar products. 14. Don’t use any cleaning agent or lubricants on this tower (see page - 7 -). Unplug before cleaning, carrying and performing any maintenance. 15. Do not use on soft surfaces, such as a bed, where air inlet may become blocked. 16. When performing filter maintenance, do not force the filter to dry using alternative methods. Doing so could damage the filter. 17. Do not use in areas where gasoline, paint or flammable liquids are used or stored.
Specifications
Model no.
A5716
Rated voltage/frequency Rated current
110-120V~/60Hz 0.45A/10.5A
Max power
1200W
Packing meas.
34”H X 9.5”D X 9.5”D
Net weight
8.5 lbs.
Oscillation
30/60/90/120
Timer
1h~8h
- 4 -
Parts and Features
1. Control panel 2. Air outlet 3. Display panel 4. Remote control 5. Infrared receiver 6. Chassis 7. Filter 8. Air inlet grill
Operation Instructions 5
6 7
3
2
4 1
Control panel
1.
Remote control
Display panel
Power button: Press power switch on the base first. Then press “ON/OFF” button on the control panel so that fan will start to blow cool air. Press “power button” again so that fan will stop.
2.
Hot button: Press “HOT” button for 3 seconds. The fan will start to blow hot air. Press “HOT” again and the fan will blow cool air.
- 5 -
3.
Timer ON: Press “TIMER ON” button to set timer. The LED will display 1H-8H as your options. The fan will turn off automatically after 1H-8H.
4.
Timer OFF: Press “TIMER OFF” button; timer will be cancelled.
5.“ - ”
Press “-” button to decrease airflow. The unit has 7 speed levels to choose from.
6.“ + ” Press “+”
button to increase airflow. The unit has 7 speed levels to choose
from. 7．“
” Swing: Press “SWING” button. The LED will display “12” which means the unit will oscillate in a 120° arc. Press again to display “90” for a 90° oscillation, press a third time to display “60” for a 60° oscillation, press a fourth time to display “30” for a 30° oscillation. Press a fifth time to display “00” to cancel oscillation.
Just a reminder： The BEEP when you press power means remote control and control panel are working.
Remote Control Instruction Replace the remote control lithium battery 1. Rotate the battery cap clockwise by hand or with a screwdriver, following the direction as indicated by the arrows. Align the mark
in the cap with the mark
to remove the battery
cap. 2. Install the battery. 3. Fit the cap and rotate the battery cap counter clockwise to align the mark mark
in the body of remote control.
Remote control
Step 1
Step 2
- 6 -
Step 3
in the cap with
Notice for Remote Control ●
To prevent children activating the heat setting, this unit cannot be powered on by using the remote control.
●
The infrared receiver is located in the bottom of LED display and top of the fan. The remote control can also work when placed on the top of the fan. The remote control should be pointed at the LED display when pressing any button on the remote control to get the best signal transmission.
●
When the fan is swinging sideways it is suggested to hold the remote at a 45° angle.
●
Don't put any obstructions between the receiver and remote control.
Care and Cleaning Please unplug the tower from the outlet before cleaning.
1. Cleaning the housing Please wipe with a dry or damp cloth. Do not use detergents or polishes to clean the tower. 2. Cleaning the air inlet Remove the air inlet grill and filter. Please use soft brush or vacuum to clean. We also suggest replacing the filter if it’s dirty and install a new one. Air inlet grill can be washed with water. Completely dry before re-installing. 3. Cleaning the air outlet Please use a soft brush to clean the debris inside the air outlet.
- 7 -
Troubleshooting Guide Problem
Possible cause
Suggested solution 1. Check to see if outlet is working
Power indicator light does not turn on
2. Consult with an electrician No power to the fan
3. Ensure the fan is on a level surface 4. Check the power switch to ensure it is on
The voltage is too low Airflow is slow
Air inlet or outlet is blocked
1. Don’t restart until the voltage is back to normal 2. Clean the air inlet or outlet
Please note HEPA Filter may decrease air speed/volume. filter is available.
For higher CFM, a charcoal only
Contact customer service at 1-800-225-6595 for more information.
SERVICE – For repairs or service, please visit your place of purchase, call 1-800-225-6595 or visit www.edenpuresupport.com.
WARNING ANY REQUIRED SERVICE OTHER THAN FILTER MAINTENANCE SHOULD ONLY BE PERFORMED BY AN AUTHORIZED SERVICE REPRESENTATIVE.
- 8 -
©2017 EdenPURE® I-5434 BR11626R-1
