Transcript
No Lead Wall Mount Drinking Fountain Semi-Recessed Model EDFA11C
®
SPECIFICATIONS GENERAL #18 gauge, type 304, nickel bearing stainless steel wall drinking fountain designed to meet all sanitary codes. Unit has embossed bubbler pad and built-in stream splitter. Finish is hand blended to a lustrous satin finish. EDFA11C: Furnished complete with Flexi-Guard®, fully assembled front pushbar, patented* valve and in-line flow regulator (20 to 105 psi), CP11 bottom cover plate and domed strainer. No trap furnished. THIS DRINKING FOUNTAIN COMPLIES WITH THE LEADFREE DEFINITION IN THE SAFE DRINKING WATER ACT OF 1986 AND LEAD CONTAMINATION CONTROL ACT OF 1988. This drinking fountain is certified to ANSI/NSF61. THIS DRINKING FOUNTAIN COMPLIES WITH THE REQUIREMENTS OF A.D.A. (AMERICANS WITH DISABILITIES ACT) WHEN RIM OF FOUNTAIN IS MOUNTED 34" FROM THE FLOOR. CONSTRUCTION Exclusive Flexi-Guard® Safety Bubbler*: Innovative design utilizes an infused anti-microbial pliable polyester elastomer to prevent accidental mouth injuries. Flexes on impact, then returns to original position. Strong. Abrasion-resistant. Antisweat. Keyed in location to prevent rotation. ALSO AVAILABLE MODEL EDFA11FC: Same as above, includes LK109A glass filler. MODEL EDFA11FPC: Includes fountain and freeze-resistant box.
Model EDFA11C
ACCESSORIES MB11: Mounting Box is available as an optional accessory. 21" (533mm) 19" (483mm) WALL OPENING 5-3/4" (146mm)
5-3/4" (146mm)
WALL HANGER 12" (305mm) x 1" (25mm) FURNISHED LOOSE
PUSH
PUSH
3-3/16" (81mm) 9-1/2" (241mm)
14" (356mm) 19-1/2" (495mm)
FOUNTAIN WASTE OUTLET LOCATION. 1-1/4" O.D. DRAIN (TRAP NOT FURNISHED)
40" (1016mm) RIM HEIGHT 6-1/2" (165mm)
2-1/2" (64mm)
**34" (864mm) RIM HEIGHT ADA REQUIREMENT
**29-1/2" (749mm)
FINISHED FLOOR LINE * Patent #4,481,971
In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice.
www.elkayusa.com
**30-3/8" (772mm)
**27-1/2" 1/4" (699mm) (6mm)
**When mounted at ADA rim height of 34".
Elkay
CENTERLINE OF DRAIN
WATER INLET LOCATION. 3/8" O.D. UNPLATED COPPER TUBE CONNECT
29" (737mm)
MOUNTING HOLES FOR 1/4" DIA. 9-1/2" (6mm) SCREWS (241mm) 1/4" (6mm) **26-1/2" (673mm) 2-1/2" (64mm)
7/16" (11mm)
27" (686mm) WALL OPENING
21-1/2" (546mm)
7-1/2" 9/16" (191mm) (15mm)
6-1/2" (165mm) WALL OPENING
1/2" (13mm)
This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.
2222 Camden Court Oak Brook, IL 60523
Printed in U.S.A. ©2004 Elkay (Rev. 1/04)
14-4G
No Lead Wall Mount Drinking Fountain Semi-Recessed Model EDFA11C
1. 2. 3.
4.
®
ROUGH-IN DIMENSIONS
IMPORTANT! INSTALLER PLEASE NOTE: Water inlet tube to be 3/8" O.D. Waste tailpiece for slip trap is 1-1/4" O.D. Contractor to supply waste trap in accordance with local codes. Connecting lines to be copper and thoroughly flushed to remove all foreign matter before connection to fountain assembly. The furnished strainer should be installed in the supply line. Connect the fountain to supply line with a shut off valve and install a 3/8" (10mm) water line between the valve and fountain. Connect the 3/8 line to the inlet of the strainer by loosening the retaining nut and inserting the tubing past the o-rings (approximately 3/4"). Finger tighten nut to lock tubing in place. Stream height is factory set at 35 psi. If supply pressure varies greatly from this, turn adjustment screw on regulator. Clockwise adjustment will raise the stream and counter-clockwise adjustment will lower the stream. For best adjustment, stream should hit the basin 6-1/2" (165mm) from the bubbler.
ACTUATION OF QUICK CONNECT WATER FITTINGS Fountain is provided with lead free connectors which utilize an o-ring water seal. To remove tubing from the fitting, relieve water pressure, push in on gray collar while pulling on the tubing. To insert tubing, push tube straight into the fitting until it reaches a positive stop (approximately 3/4" [19mm]).
OPERATION OF QUICK CONNECT FITTINGS SIMPLY PUSH IN TUBE IS SECURED PUSH IN COLLET TUBE TO ATTACH IN POSITION TO RELEASE TUBE
A
B
3/8" O.D. TUBE CONNECT COLD WATER SUPPLY BUILDING WATER BY OTHERS INLET
1/4" O.D. TUBE WATER INLET TO COOLER
C PUSHING TUBE IN BEFORE PULLING IT OUT HELPS TO RELEASE TUBE
NOTE: WATERFLOW DIRECTION
SERVICE STOP (NOT FURNISHED)
WALL ROUGH-IN 19" (483mm) WALL OPENING WALL HANGER 12" x 1" (305mm x 25mm) (FURNISHED LOOSE)
21" (533mm)
5-3/4" 5-3/4" (146mm) (146mm)
1" (25mm)
1" (25mm)
7/16" (11mm)
DOTTED LINE INDICATES OUTLINE OF FOUNTAIN 1" (25mm)
29" (737mm)
27" (686mm) WALL OPENING
RIM OF FOUNTAIN
6-7/8" (175mm) 5/16" (13mm)
2-3/4" (70mm)
7" 7" (178mm) (178mm)
2-3/4" (70mm)
WALL CUTOUT WITH BOLT LOCATIONS
Elkay 14-4G
(Rev. 1/04)
9 MOUNTING HOLES FOR 1/4" (6mm) DIA. SCREWS FOUNTAIN LOCATION
2222 Camden Court Oak Brook, IL 60523 www.elkayusa.com
1" (25mm)
40" (1016mm) RECOMMENDED HEIGHT FROM FLOOR TO RIM OF FOUNTAIN 34" (864mm) FLOOR TO RIM IF REQUIRED TO COMPLY WITH A.D.A.
Printed in U.S.A. ©2004 Elkay
