Transcript
Installation and User Guide EDGE Furniture Products for Integrators
VADDIO™ EDGE™ SERIES CAMERA MOUNTING SYSTEMS Camera Mounting Options for the Edge Series Videoconferencing Carts Part Number 798-0100-100, ECM-VAD Camera Mounting System Part Number 798-0100-101, ECM-PTL Camera Mounting System Part Number 798-0100-102, ECM-STS Camera Mounting System
Edge Camera Mounting Options: The Edge Camera Mounting Options position the camera on a height adjustable platform that securely holds a variety of cameras or set-top videoconferencing systems above the monitor. The Edge Camera Mounting Options include: ECM - VAD Camera Mounting System (PN: 798-0100-100) Edge Camera Mount for Vaddio HD-18 PTZ Camera includes: • One (1) 341-968 Vertical, Rectangular Mounting Pipe • One (1) 341-967 Platform for HD-18 (fits other upright PTZ cameras) Platform Size 6.765” (171.83mm) W x 11.5” (292.1mm) D Material: 12-gauge CRS (0.105”) Thick Front Edge Radius: 3.3825” (85.9155mm) • Four (4) ¼”-20 x 5/8” Pan Head Screws (2 for mounting the pipe to the cart and 2 for mounting HD-18 PTZ camera to the platform) • Two (2) ¼”-20 x 3/8” Pan Head Screws (attaches platform to pipe) ECM - PTL Camera Mounting System (PN: 798-0100-101) The Edge ECM-PTL camera mount provides a platform specifically designed for the Polycom® EagleEye, the TANDBERG® Precision HD cameras and the LifeSize® camera. • One (1) 341-968 Vertical, Rectangular Mounting Pipe • One (1) 342-0004 Multi-purpose Platform Platform Size 10.875” (276.22499999999996mm) W x 9” (228.6mm) D Material: 12-gauge CRS (0.105”) Thick • Two (2) ¼”-20 x ½’ Flat Head Screws (mounts platform to pipe) • Two (2) ¼”-20 x 5/8” Pan Head Screws (mounts pipe to cart) • One (1) ¼”-20 x ½’ Pan Head Screws (mounts camera to platform) • Four (4) M3 x 6mm Screws (mounts EagleEye Camera to platform)
ECM-VAD - 798-0100-100 (Camera Not Included)
ECM-PTL - 798-0100-101 (Camera Not Included)
ECM - STS Camera Mounting System (PN: 798-0100-102) The Edge ECM-STS is a larger platform that can accommodate most set top codecs and wider/bigger based PTZ cameras as well. • One (1) 341-968 Vertical, Rectangular Mounting Pipe • One (1) 341-997 Multi-purpose Platform Platform Size 15.75” (400mm) W x 8.75” (222 mm) D Material: 12-gauge CRS (0.105”) Thick • Two (2) ¼”-20 x 5/8” Pan Head Screws to (mounts pipe to cart) • Two (2) ¼”-20 x ½’ Flat Head Screws (mounts platform to pipe) ECM-STS - 798-0100-102 (Camera Not Included)
Installation Instructions (for all mounts): 1)
2)
3)
Attach the rectangular pipe to the camera platform with the 10 threaded inserts facing the rear of the camera mounting platform (for the 798-0100-101 and 798-0100-102 mounts, use the flat head screws to recess the screw heads to be flush with platform surface). Slide the rectangular tube into the vertical pipe holder in the middle of the monitor support cross bars with the threaded inserts facing the rear. Use the two (2) ¼”-20 x 5/8” pan head screws to attach the rectangular pipe through the two (2) provided holes in the vertical pipe holder and adjust the height. Attach the camera to the camera platform when the pipe and platform are securely attached to the cart. Note: Cameras are not included in any of the Edge Camera Mounting Systems.
©2010 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice. Vaddio and Edge are registered trademarks of Vaddio. All other trademarks are property of their respective owners. Document Number 342-0051 Rev. A
