Transcript
POWER SUPPORT
Our power support accessories ensure secure, low-loss electrical connections in your audio system, leading to improved system performance and reliability. Forged and machined 360 brass connection elements and set screws with marine-grade, anti-corrosive plating, specialty engineered wire connectors accept a wide range of power wire sizes without additional adaptors. High-temp polycarbonate base and cover protect against short-circuits and provide engineered stress-relief to wire.
EGBTU • Positive (+) or negative (–) battery terminal • (3) Outputs:1/0 AWG, 2 AWG, 4 AWG or 8 AWG in any combination • Shim ring allows freedom of use with most top-mount positive or negative battery posts • Solid brass parts with satin chrome finish • Brass machined set screws with marine grade plating • High-temperature PC base and cover with attractive rubber coated grip surfaces
EGDU4 • 4 position distribution block • (1) 1/0 AWG (2 AWG) input • (4) 4 AWG (8 AWG) outputs • Solid brass parts with satin chrome finish • Brass machined set screws with marine grade plating • High-temperature PC base and cover with attractive rubber coated grip surfaces
1
EGANL • Multiple gauge ANL fuse block • 1/0 AWG (2 AWG,4 AWG) input and output • Solid brass parts with satin chrome finish • Brass machined set screws with marine grade plating • High-temperature PC base and cover with attractive rubber coated grip surfaces
EGAFS • Mini ANL fuse block • 8 AWG input and output • Solid brass parts with satin chrome finish • Brass machined set screws with marine grade plating • High-temperature PC base and cover with attractive rubber coated grip surfaces
EGDU2
EGFOA
• 2 position distribution block • (1) 1/0 AWG (2 AWG) input • (2) 4 AWG (8 AWG) outputs • Solid brass parts with satin chrome finish • Brass machined set screws with marine grade plating • High-temperature PC base and cover with attractive rubber coated grip surfaces
• Fused output for use with EGDU4 and EDDU2 • Designed for Maxi fuse • Accept 8 AWG or 4 AWG wire without adapters • Solid brass parts with satin chrome finish • Brass machined set screws with marine grade plating • High-temperature PC base and cover with attractive rubber coated grip surfaces
POWER & GROUND CABLE
MAXI IN-LINE FUSE HOLDER
MULTIPLE-USE 9-CONDUCTOR CABLE
WOVEN 8-CONDUCTOR CABLE
EAFHM4 • 4/8 AWG input and output • More surface contact for maximum current transfer • Fuse insertion and removal requires no tools • Precision die-cast part is more reliable • Avaiable options: nickle, gold or chrome plating
EPGW2.1
ESC9W
ESC8W
• Edge's patent-pending 2 in 1 cable converts from power cable (positive + ) to ground cable (negative - ) • Just peel away the outer jacket to reveal the ground cable • You don’t have to worry about ground cable inventory • You don’t have to worry about ground cable minimun order quantity AVAILABLE COLORS • Translucent red outer jacket/translucent clear inner jacket • Translucent rlue outer jacket/translucent clear inner jacket • Solid red outer jacket/solid black inner jacket AVAILABLE STRANDS • Pure oxygen free copper strands • Copper clad aluminium strands
• End the days of pulling 4 pairs of speaker wire and a single remote wire • Huge time saver for installers • Patent pending woven construction is designed for noise rejection • Ideal for OEM Integration connections or 4-channel speaker wiring • All-in-one compact design fits tight space in the car • The conductors are made with industry-standard channel identification color codes
• Edge's woven 8-conductor power cable and speaker cable is designed to deliver the highest quality sound & continuous high power to any amplified system • 12 gauge wire has a very unique barbed look in silver and blue • Woven construction provides noise cancellation • Resistant to corrosion
SYSTEM DIAGRAM factory speaker wire harness
9-conductor cable
4-channel amplifier OEM integration
2
MANUAL RESET CIRCUIT BREAKER
FUSED TERMINAL CUP
Edge's circuit breakers can be used as an alternative to fuseholders and fuses. They are ideal for applications in which you need the ability to easily cut off power and allow you to reset the circuit with the flip of a switch.
Edge's patented fused terminal cups are ideal to protect your woofers and lower your warranty cost. Perfect to use with custom built enclosures or as a replacement for a pre-built sub woofer enclosure. Use with proper fuse value will blow the fuse built into the terminal cup before you blow your woofers. • Momentary over-drive protection • Fuse value selection based on Ohm load and amplifier output power • Negative & positive terminals are color coded with black and red • Plastic casing with 4 screw mounting holes • Chrome plated terminals
EGCB1
EGCB2
EGCB1/EGCB2 • Panel or fire wall mount circuit breakers with unique push button which can be used as a “kill” switch • Low-resistance, high-current ability • Manual reset • Patented set screw style connection - no need for ring terminals • Multiple wire gauge input and output sizes • Platinum plated • Available in other models from 50A to 200A sizes
Accepts direct connection of 0 or 4 gauge power wire with included adapters
3
Features unique push button reset which can also be used as a “kill” switch
EGCB3
EGCB4
EGCB3/EGCB4 • Panel or fire wall mount circuit breakers with unique push button which can be used as a “kill” switch • Low-resistance, high-current ability • Manual reset • 5/16” opening ring terminals power cable connection • Platinum plated • Available in other models from 50A to 200A sizes
EFTCRB
Watts Ohm load 250 4 2 1 500 4 2 1 750 4 2 1 1000 4 2 1
Fuse Value 10A 15A 20A 15A 20A 25A 15A 20A 30A 15A 25A 30A
MODULAR SUBWOOFER GRILL Edge is proud to introduce our patent pending modular woofer grill. It is designed to fit different size woofers from 10" to 15". Our grill not only enhances the look of your woofers, but also protects them from accidental damage. • Fits 10",12" & 15" subwoofers • Works for high excursion subwoofers • Compact size saves freight, warehousing and merchandising fees • Satin nickle finish • Not only provides protection for your sub but also adds style with its simple steel construction • Easy & simple to install in minutes • All mounting hardware included
Protection covers EMSG01
4
NEW LINE OUTPUT CONVERTER TECHNOLOGY
AUX-IN FM MODULATOR KITS
With our 3 in 1 FM Modulator, all you need is an FM radio to enjoy music from your iPod, iPhone or MP3 player while driving your car. This universal car kit uses an antenna bypass to send a high power FM signal right into your car’s radio without the competition of the cars antenna source. All you need to do is connect your music device, flip a switch and press play. In addition, our 3 in 1 FM modulator offers a USB charging port to keep your smart phone or media player charged up and ready to go. Our integrated mount gives you the ability to place your device in quick and easy accessible location.
Edge unveils four levels of new line output converter to improve the sound. These new LOC’s are designed using new transformer technology. GOOD
BETTER
BEST
ALOC2-4
MATLOC2-4
ULTIMATE
PATLOC2-4
FMMCM3-1 ALOC4-4 • The entry level LOC is designed to be used in applications of 35W and less for the best sound quality and reliability • 2 & 4-channel line output converter • Adjustable output step down • 35W maximum input • Good frequency response
MATLOC4-4 • The mid-level LOC is designed as an upgrade and to be used in applications using 50W and less for the best sound quality and reliability • 2 & 4-channel line output converter • Adjustable output step down • 75W maximum input • DC amplifier turn on trigger • Good frequency response and low distortion
LINE LEVEL & NOISE CONTROL INTERFACES
PATLOC4-4 • The premium level LOC are the best with very low distortion and exceptionally high power handling. It idesigned to work in situations where going after the factory amps output stage is needed and it can handle up to 150W of input. • It uses a Molex plug for ease of installation • 2 & 4-channel line output converter with line driver • Adjustable output step down • DC amplifier turn on trigger • 150W maximum input • Super low distortion
QLOCD2-4 • Our QLOCD2-4 is designed to accept high level output of any OEM source unit or amplifier, and provide a high performance RCA level output signal. Especially, QLOCD2-4 boost the output signal up to 10V RMS, with low impedance of 28 Ohms that makes your factory radio sound better and play louder • 2-channel line output converter • 2-channel line driver • Quick auto signal sense turn on • Remote output trigger
5
ALOC4-5
GLIRCA-5
ATLOC2-5
ALOC4-5
ATLOC4-5
GLIRCA-5
GLI3.5-5
TRI-5
• 2-channel line output converter • 6:1 step down w/adjustable outputs • 40 watts maximum input • EIA color coded inputs • Converts speaker level inputs to RCA outputs
• 2-channel digital noise filter+line driver • DC amplifier turn on trigger • 6:1 step down w/adjustable outputs • 40 watts maximum input • EIA color coded inputs • Converts speaker level inputs to RCA cable outputs
• 4-channel line output converter • 6:1 step down w/adjustable outputs • 40 watts maximum input • EIA color coded inputs • Converts speaker level inputs to RCA outputs
• 4-channel digital noise filter+line driver • DC amplifier turn on trigger • 6:1 step down w/adjustable outputs • 40 watts maximum input • EIA color coded inputs • Converts speaker level inputs to RCA cable outputs
• Ground loop isolator • Eliminates engine noise by isolating ground loops • Use with any audio device that has RCAs connector
• Ground loop isolator • Eliminates engine noise by isolating ground loops • Use with any audio device that has a 3.5mm connector
• Switching signal can be captured directly from any speaker wire for high-powered OEM radios lacking remote output • Incorporates a 2-3 seconds delay before triggering the output in all applications • Eliminates turn-on pop in aftermarket amplifiers • Low input current requirement and no induce transients
car antenna to car antenna
to car radio
FM modulator 8 pin cable 3.5 to 3.5mm cable
AUX-IN LOC KITS With our auxiliary input LOC kits, you can enjoy music from your iPod, iPhone or MP3 player through your aftermarket car audio system. This kits comes with a full-range volume control, which has an AUX input. The line output converter is designed to accept the high level output of any OEM source unit, or line level signal from any mobile device, and provide a high performance RCA level output signal to an amplifier. Just push the volume control knob button to switch the signal between OEM source unit and mobile device.
TRI-5
ALOC2-5
car AM/FM/CD player
CLA charger
LOC-AV
ALOC2-5
System Diagram
Product Features • Compatible with any factory or aftermarket FM radio receiver • Great audio playback quality • 3.5mm audio input connects easily to most smart phones, MP3 players and tablets • Supports USB battery charging (charging cable not included)
6
Product Features • 2 channel line output converter • Full-range volume control with AUX input • 2 Channel line driver • Quick "auto-signal sense" turn on • Remote output trigger • Up to 10V RMS signal output with low impedance of 28 ohms that makes your factory radio sound better and play louder. • Push button to switch signal between OEM source unit and mobile device.
System Diagram
System Diagram
3.5 to 3.5mm cable
speaker level
mobile device
OEM source unit speaker level output system diagram
3.5 to 3.5mm cable
mobile device
Aftermarket source unit RCA level output system diagram
UNIVERSAL BLUETOOTH® RECEIVER
MUTE BOX
Edge introduces an universal Bluetooth® receiver for your smart phone and mobile devices. You can use it in the car, on the go and at home.
Edge's mute box is designed to transmit an incoming voice signal from the navigation system, smart phone or PDA to the original front speakers of the car.
IN THE CAR
• Automatic mute during incoming signal.The incoming signal is automatically transmitted to the front speakers of the car • Universal wire harness or hard wire connections • Mini USB 5V power supply for external units • Audio in with 3.5mm plug • 12V and 5V connection for external units • Interference suppression filter • Integrated fuse
EGMB-01
Make Calls and Play Music Edge's Bluetooth® receiver lets you make hands-free calls and play music directly through your car stereo. It provides convenient wireless connectivity with excellent audio quality for calls and music. After an initial pairing process, just turn it on to reconnect—even if your smartphone is in your pocket or a bag. Plus, with built-in echo cancellation technology specifically designed for in-car use.
BR01
• Routes calls and music from a smartphone through car speakers • Seamlessly switches between calls and music • Embedded microphone mounts anywhere on the dashboard for the best voice pick-up • Aux-In connects to car stereo • Bluetooth® v2.0 with EDR for superior wireless performance • Transmits up to 33 feet away • Compatible with all devices enabled with A2DP stereo Bluetooth®
Simple Setup This adapter easily connects your smart phone to your car stereo—no need for professional installation. Simply plug it into your car’s auxiliary input jack and use Bluetooth® to pair with your phone. Easy Control Use the call/play button to switch between talking and playing audio files stored on your phone or streaming Internet radio—without taking your eyes off the road. If music is playing when a call is received, you’ll hear the phone ring through your car speakers. To answer, tap Call/Play button and the caller’s voice will come in loud and clear through the speakers. ON THE GO
(navigation system is not included)
This Bluetooth® receiver can be hung on user’s neck or stick to magnetic mount on T-shirt. It supports Bluetooth ® 2.1+EDR with A2DP, headset and handsfree profile and you can plug your own 3.5mm headset or earphones for wireless calling and wireless music streaming. There call/end button as well as music control buttons. It offers up to 10 hours of talk/music time and up to 300 hours of standby. It has 3.5mm audio jack and a mini USB port for charging the integrated 300mAh Li-Polymer Battery.
REMOTE TRIGGER OEM Integration - provides an amplifier switching solution for OEM radios having low-voltage or current-limited remote outputs
• Switching signal can be captured directly from any speaker wire for high-powered OEM radios lacking remote output • Incorporates a 2-3 seconds delay before triggering the output in all applications • Eliminates turn-on pop in aftermarket amplifiers • Low input current requirement and no induce transients
AT HOME
Play Your Music Through Your Home Stereo—Wirelessly Now you can play your iPhone, iTouch or any Bluetooth® devices' music through your home stereo or stand-alone speakers—wirelessly. You’ll get stereo sound and the ability to control your playlist directly from your device from the comfort of your couch. TRI-1
7
8
TRI-2
