Transcript
8" coaxial compact 2-way full-range loudspeaker system Cod: EDGE8CXPW
Overview The EDGE8CXP is a diffusion system with the characteristics of being truly compact and versatile. The custom made co-axial speaker has been developed on the specifics of the PROEL Research and Design laboratory. The results have been aimed at producing the best performance from an 8'' woofer combined with a 1'' driver. The woofer is comprised of an ISV (Interleaved Sandwich Voice Coil) and an aluminium casing. The double ventilated die-cast basket has been designed the have improved heat dissipation and thereby reduce the power compression level. The compression driver provides better excursion control and reduces distortion through use of Ferro-fluid. The diaphragm has been constructed with a new synthetic material which, together with the reinforced radius design increases the rigidity and thereby avoiding the formation of uncontrolled vibrations. The phase plug is the result of a meticulous study and has been designed using 3D CAD software to realise a shape that guarantees a correct acoustic impedance which reduces dramatically the levels of distortion. The pressed Aluminium voice coil assures low distortion and high efficiency with good power handling. The EDGE8CXP has an internal 12dB per octave passive crossover with a PTC electronic protection.
Technical Specifications System type: Coaxial 2-way vented enclosure Nominal Impedance: 8 ohm Input power rating (AES): 225 W Input power rating (program): 4 50 W Frequency response: 80 Hz - 20 kHz (-6dB, +6dB) Sensitivity: 95 dB SPL ( 2.83V @ 1m ) Maximum (peak) Output: 121 dB
Low Frequency Device: 8'' woofer - 2'' voice coil High Frequency Device: 1'' compression driver - coaxial Coverage Angle H. (-6 dB): 85° averaged, 1 kHz to 20 kHz Coverage Angle V. (-6 dB): 85° averaged, 1 kHz to 20 kHz Monitor Taper: 4 5° Directivity Index (DI): 9.7 averaged, 1 kHz to 20 kHz Flying System: 4 x M10 - top, bottom, rear Connectors: 2 Neutrik Speakon NL4 MP paralleled, 1+ IN+, 1- INConstruction: 15mm birch plywood Finishing: Paint finish Cabinet Colour: White Mounting Pole: 1 x bottom Weight: 10 lb Dimensions (W x H x D): 26 x 33 x 28 cm
Tec hnic a l spec ific a tio ns a nd a ppea ra nc es a re subjec t to c ha nge witho ut no tic e a nd a c c ura c y is no t gua ra nteed. All tra dema rke a re the pro perty o f their respec tive o wners. PROEL a c c epts no lia bility fo r a ny lo ss whic h ma y be suffered by a ny perso n who relies either who lly o r in pa rt upo n a ny desc riptio n, pho to gra ph o r sta tement c o nta ined herein. Co lo rs a nd spec ific a tio ns ma y va ry fro m a c tua l pro duc t. PROEL pro duc ts a re so ld thro ugh a utho riz ed fullfillers a nd resellers o nly. This ma nua l is c o pyrighter. No pa rt o f this ma nua l ma y be repro duc ed o r tra nsmitted in a ny fo rm o r by a ny mea ns, elec tro nic o r mec ha nic a l, inc luding pho to c o pying a nd rec o rding o f a ny kind, fo r a ny purpo se, witho ut the express written permissio n o f PROEL - Via a lla Ruenia 37/43 - CAP 64027 - Sa nt'Omero (TE) ITALY.
Fo r servic e, suppo rt, o r mo re info rma tio n c o nta c t: Pro el S.p.A. Via a lla Ruenia 37/43 CAP 64027 - Sa nt'Omero (TE) ITALY
