Transcript
EFFI-Lase Last update : May 21, 2013
Please take a while to consider and read this brochure before using your new device If you have any doubt, please refer to the datasheet http://www.effilux.fr/files/effilux/datasheet/datasheet-EFFI-Lase-en.pdf
Warning
Do not look directly or with any optical instrument the light beam Avoid any contact with the lithographic pattern of the device IP54 Classification: Do not immerse the device in water or any other liquid Use the device in an environment at -10°C à +50°C with no excessive moisture: humidity and high temperature could damage the device Do not use the device in an environment with oil fumes, steam and moisture. Do never try to open the device or fix any damage by yourself. Make sure you are using a correct power supply before connecting the device Do not inverse electrical polarity – check your connections and the conventions before turning on the power supply Either use the connector provided by EFFILUX or make sure you consider an adapted connector to link the device to the power supply
L06
Single line pattern 50µm Single line pattern 20µm Single line pattern 10µm 3 lines pattern 500µm pitch 3 lines pattern 200µm pitch 5 lines pattern
G03
Cloud of dots - density 50% Cloud of dots 1 - density 17% Cloud of dots 2 - density 17% Grid with rounded points - small Grid with rounded points - large Grid with lines - small
L07
100 lines pattern
G04
Grid with lines - large
L08
20 lines pattern
G05
Grid with squares
L09
Single line pattern 5µm
L02
3D profiling
L03 L04 L05
EFFILUX 7, avenue de l’Atlantique 91940 Les Ulis FRANCE
C02 C03
Stereovision
L01
C04 G01 G02
Tel : +33 9 72 38 17 80 Fax : +33 9 72 11 21 69 Email :
[email protected]
Alignment
Any improper use voids the warranty A01
Cross pattern
A02
Concentric circles
A03
4 lines arranged in a square
EFFI-Lase Last update : May 21, 2013
Electronics
Optics
Mechanics
Environment
Power supply Illumination mode Connectors Power consumption Wavelength Projection system Projected pattern Maximum dimensions Objective adjustment Fastener Material Working temperature IP code
EFFILUX 7, avenue de l’Atlantique 91940 Les Ulis FRANCE
24V DC or constant current Continuous or strobe modes M12 4 pins or M8 3pins 5W Various wavelengths (from UV to IR, white) Any C-mount objective Various designs for alignment, 3D profiling and stereovision 32mm x 105mm (without the objective) A C-mount adaptor on the projector 4 M4 holes on the side of the device Device body : Aluminum alloy 0°C to 50°C IP54
Tel : +33 9 72 38 17 80 Fax : +33 9 72 11 21 69 Email :
[email protected]
EFFI-Lase Last update : May 21, 2013
Presentation of the device C-mount objective
Pattern M8 connector
22.5mm
Ø30
M4x0.7
C-mount adaptor
90.7mm
Hole to fasten the device – M4x0.7
Ø33
Any C-mount objective can be mounted on the projector.
Depending on the working distance (WD) and the C-mount objective selected, different pattern sizes are obtained: Objective f=9mm f=12.5mm f=25mm f=50mm
WD = 20mm 55 50 15 n.a.
WD = 50mm 100 75 40 n.a.
Line length (mm) WD = 100mm WD = 200mm 170 300 130 230 60 120 15 45
Dimensions of a 50µm line pattern Objective
f=25mm f=50mm
Pattern dimensions H x W (mm) WD = 200mm WD = 500mm WD = 1000mm 100 x 76 250 x 188 500 x 380 125 x 94 250 x 190
Dimensions of a 12.8x9.6mm cloud of dots pattern
EFFILUX 7, avenue de l’Atlantique 91940 Les Ulis FRANCE
Tel : +33 9 72 38 17 80 Fax : +33 9 72 11 21 69 Email :
[email protected]
WD = 300mm 450 340 180 75
EFFI-Lase Last update : May 21, 2013
Remarks concerning the power supply Prepare all the set up before connecting the device to the power supply. First connect the device to the power supply and then turn on the power supply Respect electrical conventions when you connect the device to the power supply
4 1 Maximum 700mA
3
M8 connector Pin number 1 3 4
Cable color Brown Blue Black
Designation n.a. + GND
Please contact EFFILUX technical support for additional details
EFFILUX 7, avenue de l’Atlantique 91940 Les Ulis FRANCE
Tel : +33 9 72 38 17 80 Fax : +33 9 72 11 21 69 Email :
[email protected]
