Transcript
TECHNICAL DATA Dwg:
DS-S08-069
Rev:
Date:
SCAVENGER SERIES 06/04
Section
Scavenger
Tab
EJ 05W
Ejector Pumps
Page
MOTOR SPECIFICATIONS NEMA design B, squirrel cage induction, oil filled (non toxic) Enclosed submersible Class B, rated at 120° C Integral Bi-Metallic current sensing switch providing over temperature shut down 1.10 ± 10% from nominal UL 778 and CSA C22.2-108
Motor Design Motor Type Insulation Class Motor Protection Service Factor Voltage Tolerance
Approvals MOTOR DATA, 60Hz Model
Phase
EJ 05W
1 1
Rated Output Power 0.5 Hp 0.5 Hp
Volts 115 230
Full Load Amps 10.6 5.3
Locked Rotor Amps 21.4 10.5
NEMA Code Letter E E
Power Factor 100% Load 0.87 0.87
Motor Efficiency 100% Load 59 59
Pole/ Speed (rpm) 4/1750 4/1750
MATERIALS of CONSTRUCTION Motor Housing Volute External Hardware O-Rings Motor Shaft Oil Upper Bearing Lower Bearing Lower Shaft Seal Impeller
Cast Iron ASTM A48 Class 30 Cast Iron ASTM A48 Class 30 304 Stainless Steel Buna-N 420 Stainless Steel Non-toxic white mineral oil (Marcol 52) Single row ball bearing Single row ball bearing. Spring loaded rotating carbon face w/ stationary ceramic face. Polybutylene Terephthalate (PBT) 30% glass fiber, Vortex
DIMENSIONS, WEIGHT, AND MISC. Pump weight, single phase (lb.) Maximum submergence (feet) Discharge size, standard Discharge thread type Discharge size, optional Maximum temp. of pumped fluid
37 30 2 Inch, Vertical Female NPT none 40°C continuous, 50°C intermittent
CABLE SPECIFICATIONS MODEL EJ 05W
POWER CABLE Quantity, Type 115 volt - 16/3 SJEOOW or equiv. w/ 3 prong plug 230 volt - 16/3 SJEOOW or equiv. w/ 3 prong plug
Specifications subject to change without notice
LENGTH, Feet 15
OUTER JACKET Thermoplastic elastomer
