Transcript
Data sheet
t to change withoutNo.: notice 5.204 Sheet
EL ACTUATOR WITH SPEED CONTROL TIMER - AC (Kit option)
Rev. A Date: November 2009
1
Speed setting
2
4 3
9
Construction This adjustment is easily carried out with a small screwdriver, with the cover removed.
Top motor plate
The circuit board is located on top of the motor plate and is wired directly to the terminal strip. Construction
Speed setting
Limitswitch and rotor
The circuit board is located on top of the motor plate and is wired directly to the terminal strip. Specification Voltage Specification Temperature Voltage Speed
Indication shaft PC no No req Description
: 110 or 220V 50/60 Hz. : -20°C to +70°C 110 or 220V 50/60 Max. Hz. : : Model Min. Temperature : -20°C to +70°C sec. sec. Speed : ELModel Min. 255Max. 55 11.5 sec. 298sec. EL 100 13.5 EL 15055 17.0 11.5 383 255 EL EL 200 100 25.5 13.5 574 298 EL EL 350 150 41.5 17.0 936 383 EL EL 500 200 48.5 25.5 1085 574 EL EL EL 800 350 48.5 41.5 1085 936 EL EL 1200 500 48.5 48.5 10851085 EL EL 1600 800 48.5 48.5 10851085 EL EL 2500 1200 53.0 48.5 11911085
Used on
9
3
Print spacer
9
3
Spacer/screw
10
1
Speed control board
EL55 EL100/2500 EL55 EL100/2500
Incoming power N
L
Field wiring
Identification
16 Amp Open
Close
EL 1600 EL 2500
48.5 53.0
1085 1191
Nr.:
Factory Option : Add “+ SC” to the basic actuator size. : eg. EL100 220/50 + SC Identification Kit Option : Actuator size is added to: “Kit, SC” Factory Option : Add “+ SC” to the basic actuator size : eg. Kit, SC/EL100 220/50
6
7
com
no
nc
Limit switch 4
: eg. EL100 220/50 + SC Kit Option : Actuator is added to: “Kit, SC” Note 1) When supplied as size a kit option, all the components as eg.included, Kit, SC/EL100 shown: are together220/50 with an instruction sheet. 2) Wiring diagram is shown with actuator in mid position.
Note 1) When diagram suppliedfor asEL55 a kit220V/50Hz option, all +the 3) Wiring SCcomponents as shown are included, together with an instruction sheet 2) Wiring diagram is shown with actuator in mid position 3) Wiring diagram for EL55 220V/50Hz + SC
SC
Limit switch 3
Green
Limit switch Limit switch Heater close 1 open 2 10W
nc
Blue
Yellow
com
no
White
nc
Red
com
no
22 23 24 25 26 27 Black
Brown
nc
10 11 12 Brown
Speed control
no
Green
Date:
Motor 1~
37 40
9
Blue
Yellow
com
4A 4
8 White
Brown
Brown
C Actuator wiring
5
4
Purple
Red
3
Black
2
Brown
1
EL ACTUATOR WITH SPEED CONTROL TIMER - AC (Kit option)
10
TM
www.El-O-matic.com
SC
Description This electric actuator variation has the addition of an electronic card, Description this is provided complete with a dual voltage (AC.) power supply, a This electric actuator variation has and the aaddition an electronic trimmer for motor pulse adjustments triac for of motor switching. card, this is provided complete with a dual voltage (AC.) power asupply, a trimmer for motor pulse The circuit provides timed ON/OFF switching cycle. Theadjustments ON pulse and a triac for motor switching. is fixed at 0.5 sec and the OFF pulse is adjustable via the trimmer. Thiscircuit adjustment is easily carried out withswitching a small screwdriver, The provides a timed ON/OFF cycle. The with ON pulse is fixed at 0.5 sec and the OFF pulse is the cover removed. adjustable via the trimmer.
Copyright © Emerson Process Management. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website www.El-O-Matic.com or from your nearest Valve Automation Center USA: +1 813 319 0266 Europe: +31 74 256 10 10 Asia-Pacific: +65 6501 4600
