Transcript
larm Monitoring onitoring Function unction Alarm
EL1300 is designed for medium-size establishments requiring basic access and alarm monitoring facilities at low cost. It can function in stand-alone mode, using a PIN entry keypad for programming, or up to 64 units can be networked together and controlled using EsofWIN32, a PCbased Access Management and Alarm Monitoring Software.
Advanced dvanced D Design esign A
Reliable Operation
EL1300 uses the latest microcontroller, with firmware stored in Flash Memory. The firmware can be updated in-circuit through serial download from PC.
EL1300 is equipped with a real time clock backed up by a lithium battery. Time will continue to be recorded for months without any external power source. Essential equipment settings, card database and transaction database are stored in EEPROM, so that there is no loss of data during power outage, even if no battery back up is provided.
Alarm monitoring function is available when EL1300 is operated from EsofWIN32 PC software. Each EL1300 is equipped with 3 supervised inputs and 1 relay output. Since maximum system size for EsofWIN32 is 64 doors, such a system will have 192 input points and 64 output points for alarm monitoring usage. Complex reaction sequences can be set by users from EsofWIN32. Thereafter, arming or disarming of alarm zones, and switching on or off output groups can be performed from any reader PIN keypad connected to EL1300.
atabase Database EL1300 provides following storage capacity:-
. Transaction database - 1000 transactions can be logged.
. Card database - 1750 Cards with computed PIN or 1250 Card number with user-defined PIN.
Model EL-1300-001
Keypad Unit
Accessories
EL1300 can be connected to a keypad unit (EK9S or EK6S) which provides 12 numeric keys, and 4 digits of 7-segment display. This keypad unit is used when PIN code is required to be entered, as when EL1300 is operated in PIN Code only mode or Card+PIN mode. In addition, this keypad is used for programming when EL1300 is not connected to a PC (stand-alone mode). Where the alarm monitoring function is used, the keypad also acts as the arming, disarming and output control terminal.
CS-1065 EP-0001-002
EL1300 Access & Alarm Controller
Metal casing Transformer 240V/15VAC
Compatible Keypads ER-0009-001 ER-0006-124
Serial keypad (rubber) with 4x7 segment display Serial keypad (membrane) with 4x7 segment display
Compatible Readers ER-1200-002
Power Supply
ide Choice hoice of of Reader eader and and Card ard Formats ormats Wide
Time Zones
EL1300 accepts magnetic card reader (F2F) signals and Wiegand (Data0/1) signals. A wide range of formats are catered for, such as ABA format, 26 bit Wiegand format, and free format, where users can specify selected fields such as Card ID number and facility code.
EL1300 provides 10 time zones (categories), each with 8-day schedule (7 weekdays + holiday), with 2 start-stop periods assigned to each day. Up to 20 holidays can be programmed beforehand. Automatic Time Zones are provided for unlocking doors or selecting Card+PIN mode at specific periods.
EL1300 comes with battery-charging and a power regulation circuit. The input power requirement is 15VAC, and a lead-acid battery can be connected to the charger output. In addition, AC power failure and battery low status sensing are built-in.
Magnetic swipe reader with serial keypad & 4x7 segment display ER-0923-0M2 Proximity reader (HID compatible) ER-0923-006 Proximity reader (EM compatible) ER-0680-S02 Mifare contactless reader
Specifications MCU Memory Clock Serial Interface Relay Output Sensor Input Power supply Current consumption Dimensions
: MC68HC08GP32 8-bit CPU running at 4.9 MHz : 512B RAM, 32KB Flash ROM, 16KB EEPROM : Real Time Clock with Lithium back-up : RS485 or Multi-drop : 2 sets, 5A contact rating : 3 inputs, supervised, termination resistor 3.3K : 15VAC input, 13.8V output, 1.5A output : 0.5A : 280(H) x 260(W) x 75(D)
