Transcript
Multi Protocol Analogue Addresable Fire Control Panels
TRUST • CHOICE • EXPERTISE • SUPPORT
www.haes-systems.com
Analogue Addressable Control Panels
HS-5100 - 1 Loop
HS-5200 - 2 Loop
Single loop
One or two loops
Small enclosure
Medium enclosure
Max 7Ah internal batts
Max 12Ah internal batts
20 programmable LEDs
Up to 50 additional programmable LEDs
Optional programmable key switch Programmable input
Up to 8 programmable key switches or 4 + printer
Medium enclosure option
Large enclosure option
HS-5400 - 4 Loop
HS-5800 - 8 Loop
One to four loops
Two to eight loops
Large enclosure
Extended enclosure
Max 17Ah internal batts
Max 45Ah internal batts
Up to 200 additional programmable LEDs
Up to 200 additional programmable LEDs, 2 x switch cards or mimic
Up to 8 programmable key switches or 4 + printer
Up to 8 programmable key switches or 4 + printer
Deep enclosure option
The next generation analogue addressable fire alarm system solution from Haes The Elan is the next generation of analogue addressable fire alarm control panels that are fully compliant with EN54 part 2, 4 and 13. The panels have been designed to be flexible and powerful with an intuitive user interface. The Ad-Net network system allows up to 200 Elan series control panels, remote terminals and network peripherals to be connected in a true peer-to-peer network using a 2 core fire resistant cable, sharing up to 1000 zones. Our DynamixTools config software offers powerful yet simple to set up cause & effect programming and the AlarmCalm option makes it very easy to implement False Alarm Management configurations, often in one click. The Elan system offers an extensive range of peripheral devices including a variety of plug in module cards, programmable key switches, on-board printer and remote terminal units including the new Touch10 touch screen terminal with built in active maps and zone plans.
TOUCH-10 TouchControl is a 10”, high-resolution touch screen Remote Control Terminal with active maps and zone plans. It is a fire panel and network node in its own right and works on Haes’ standard and fault tolerant networks. It is compatible with our Elan range of fire control panels. Zone information is presented via both the unit’s colour coded, easy-to-navigate interface and the active maps that are easily configured using the Dynamix Tools Map App.
www.haes-systems.com
Multi Protocol System 200 Node Network Powerful Cause & Effect programming Building Management Graphical Interface
Analogue Addressable Control Panels
UP TO 1000 ZONES AD-NET
200 NODE NETORK
The Ad-NeT network system allows all Elan series control panels, remote terminals and network peripherals to be connected together using standard fire resistant two-core cable. The network operates as a true peer-to peer system allowing information from any input or output device to be passed over the network and displayed on any Elan control panel or remote terminal as required. BACnet
BMS Graphical Interface The BMS Interface allows any Elan system to interconnect and communicate with independent 3rd party BMS (building management systems) as well as PC based graphical control systems.
BMS BLOCK 2
Main Entrance
This allows the fire system to be managed using existing fire or facilities management systems. Physical connection to the external system is via a serial connection allowing the external BMS/Graphics systems to issue commands and receive information whilst the BMS interface handles all network traffic and event prioritisation.
False Alarm Management
Fast Hardware
Simple Software
BLOCK 2
BLOCK 1
Multiple BMS interfaces can be connected to an AdNet network allowing independent connections to a wide range of control systems.
IP Gateway
Main Entrance
Key Switch Control
Intelligent Loop Devices
AlarmCalm is a three stage solution of fast hardware, powerful, easy-to-use software and intelligent, loop powered acknowledgement devices.
ipGateway provides a secure, remote internet connection to an Elan fire system via a standard web browser. No special software is required.
The AlarmCalm Button is a fully intelligent loop device that allows building occupants to acknowledge a fire alarm signal locally, for example if they believe a smoke detector has signalled a false alarm.
The state of each device on the network is displayed and users can Enable/Disable zones, Enable/ Disable devices, Reset, Mute, and Silence/Resound sounders on the network.
www.haes-systems.com
The Elan control panel range supports direct installation of up to 8 individual keyswitches which can be assigned specific operating or isolating functions using the DynamixTools config software. The Elan 1 loop permits 1 key-switch to be fitted, but the Elan 2 - 8 loop control panels allow a maximum of 8.
About Us From the land to the sea, Haes has you covered with a leading range of fire detection and alarm products which are manufactured in the UK and used worldwide. We deliver integrated solutions for clients of all type and size, manufacturing our own renowned range of control and indicating equipment, power supplies, relays and other peripherals. Haes is ISO9001 certified with additional industry and product accreditations from bodies including BAFE, LPCB, BSI, MED, Lloyds Register & ABS. With over 40 years experience in the fire detection industry, the team are focused on helping installers and planners to choose, install and manage fire alarm systems. Our team of designers, engineers and production specialists constantly innovate the latest fire detection technology, backed by dedicated customer advisers that are on-hand to provide support and guidance. For further information and to view more on our extensive product range visit: MANAGEMENT SYSTEMS
www.haes-systems.com Addressable Systems
Conventional Systems
Marine Systems
Connect with us
Haes Systems Limited, Columbia House, Packet Boat Lane, Cowley, Uxbridge, UB8 2JP, UK Tel: +44 (0) 1895 422066 Fax: +44 (0) 1895 420603 e:
[email protected] www.haes-systems.com
