Transcript
No Lead Drinking Fountain Fully Recessed Wall Mount Model EDFB12C
SPECIFICATIONS GENERAL #18 gauge, type 304, nickel bearing stainless steel wall drinking fountain designed to meet all sanitary codes. Unit has embossed bubbler pad and built in stream splitter. Finish is hand blended to a lustrous satin finish. EDFB12C: Furnished complete with Flexi-Guard® safety bubbler, fully assembled front push bar, flow regulator provides constant stream from 20 to 105 psi water pressure, and domed strainer. No trap furnished. THIS DRINKING FOUNTAIN COMPLIES WITH THE LEADFREE DEFINITION IN THE SAFE DRINKING WATER ACT OF 1986 AND LEAD CONTAMINATION CONTROL ACT OF 1988. Elkay Drinking Fountains are manufactured with a waterway system utilizing copper components and completely lead-free material. These waterways have no lead because all leaded materials, such as leaded brass, have been removed. THIS DRINKING FOUNTAIN COMPLIES WITH THE REQUIREMENTS OF A.D.A. (AMERICANS WITH DISABILITIES ACT) WHEN RIM OF FOUNTAIN IS MOUNTED 34" FROM THE FLOOR OR LESS AND PROPER CLEAR FLOOR SPACE IS PROVIDED. CONSTRUCTION Exclusive Flexi-Guard® Safety Bubbler: Innovative design utilizes a pliable polyester elastomer to prevent accidental mouth injuries. Flexes on impact, then returns to original position. Strong. Abrasion-resistant. Anti-sweat. Keyed in location to prevent rotation. ALSO AVAILABLE MODEL EDFB12FC: Same as above, includes LK109A glass filler.
5-3/4" (146mm)
19" (483mm) 17" (432mm) WALL OPENING
26-5/8" (676mm)
ACCESSORIES MB24: Mounting Box is available as an optional accessory. STANDARDS This fountain is certified by WQA to lead-free compliance including NSF/ANSI 61-ANNEX G, AB 1953.
1/2" (13mm) 11/16" (17mm)
10-11/16" (272mm) WALL OPENING
29-1/2" (749mm) WALL OPENING
32-1/2" (826mm)
CENTERLINE OF DRAIN
WATER INLET LOCATION, 3/8" O.D. UNPLATED COPPER TUBE CONNECT
5-7/8" (149mm) 1/8" (3mm) MOUNTING HOLES FOR 1/4" DIA. (6mm) SCREWS 8-1/2" (216mm) 7/16" 26" (661mm)* (11mm) 4-1/4" (108mm)
5-3/4" (146mm)
Model EDFB12C
8-1/2" (216mm)
17-7/8" (454mm)
1" (25mm) 3-3/16" (81mm)
FOUNTAIN WASTE OUTLET LOCATION. 1-1/4" O.D. DRAIN (TRAP NOT FURNISHED)
40" (1016mm) RIM HEIGHT
31" (788mm)* 27-1/2" 34" (864mm)* 7/16" (699mm)* RIM HEIGHT (11mm) ADA 8-1/2" REQUIREMENT (216mm)
7-11/16" (195mm)
30-1/2" (775mm)*
FINISHED FLOOR LINE *MEASUREMENTS FOR ADA REQUIREMENTS
5-3/4" (146mm)
19" (483mm) 17" (432mm) WALL OPENING
26-5/8" (676mm)
1/2" (13mm) 11/16" (17mm)
10-11/16" (272mm) WALL OPENING
CENTERLINE OF DRAIN
WATER INLET LOCATION, 3/8" O.D. UNPLATED COPPER TUBE CONNECT
(149mm) 1/8" (3mm)
26" 7/16" (661mm)* (11mm) 4-1/4" (108mm)
5-3/4" (146mm)
29-1/2" (749mm) WALL OPENING
32-1/2" (826mm)5-7/8"
MOUNTING HOLES FOR 1/4" DIA. (6mm) SCREWS 8-1/2" (216mm)
8-1/2" (216mm)
17-7/8" (454mm)
1" (25mm) 3-3/16" (81mm)
40" (1016mm) RIM HEIGHT
31" (788mm)* 27-1/2" 34" (864mm)* 7/16" (699mm)* RIM HEIGHT (11mm) ADA 8-1/2" REQUIREMENT (216mm)
7-11/16" (195mm)
FOUNTAIN WASTE OUTLET LOCATION. 1-1/4" O.D. DRAIN (TRAP NOT FURNISHED) 30-1/2" (775mm)*
FINISHED FLOOR LINE
In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkayusa.com for most current version of Elkay product specification sheets.
Elkay elkayusa.com
This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.
2222 Camden Court Oak Brook, IL 60523
Printed in U.S.A. ©2011 Elkay (Rev. 4/11)
14-5G
No Lead Drinking Fountain Fully Recessed Wall Mount Model EDFB12C WALL HANGER 12" X 1" (305mm X 25mm) (FURNISHED LOOSE) 11/16" (17mm)
ROUGH-IN DIMENSIONS
5-3/4" (146mm)
5-3/4" (146mm)
DOTTED LINE INDICATES OUTLINE OF FOUNTAIN
19" (483mm)
17" (432mm) WALL OPENING
1" (25mm)
1" (25mm)
1-3/4" (44mm)
32-1/2" (826mm)
29-1/2" (749mm) WALL OPENING
RIM OF FOUNTAIN 6-3/4" (171mm)
1" (25mm)
1/8" (3mm)
4-11/16" (119mm)
4-1/4" (119mm) 4-1/4" (119mm)
4-11/16" (119mm)
1-1/4" (32mm)
7 MOUNTING HOLES FOR 1/4" (6mm) DIA. SCREWS
40" (1016mm) RECOMMENDED HEIGHT FROM FLOOR TO RIM OF FOUNTAIN
FOUNTAIN LOCATION
WALL CUTOUT WITH BOLT LOCATIONS
34" (864mm) FLOOR TO RIM IF REQUIRED TO COMPLY WITH A.D.A.
(NOT FURNISHED) SERVICE STOP
DIRECTION NOTE: WATERFLOW
TO COOLER WATER INLET 1/4" O.D. TUBE
COLD WATER SUPPLY 3/8" O.D. TUBE CONNECT
INLET BUILDING WATER
RELEASE TUBE PULLING IT OUT HELPS TO PUSHING TUBE IN BEFORE A
B
C
TUBE TO ATTACH IN POSITION TO RELEASE TUBE SIMPLY PUSH IN TUBE IS SECURED PUSH IN COLLET
OPERATION OF QUICK CONNECT FITTINGS
INSTALLATION INSTRUCTIONS 1. Remove lower panel from drinking fountain by removing the two screws at the lower corners. Rotate the bottom of the panel out and pull gently downward to remove. 2. Water inlet tube to be 3/8" O.D. Waste tailpiece for slip trap is 1-1/4" O.D. Contractor to supply waste trap in accordance with local codes. 3. Connecting lines to be copper and thoroughly flushed to remove all foreign matter before connection to fountain assembly. The furnished strainer should be installed in the supply line. 4. Connect the fountain to supply line with a shut off valve and install a 3/8" (10mm) water line between the valve and fountain. Connect the 3/8 line to the inlet of the strainer by loosening the retaining nut and inserting the tubing past the o-rings (approximately 3/4"). Finger tighten nut to lock tubing in place. 5. Stream height is factory set at 35 psi. If supply pressure varies greatly from this, turn adjustment screw on regulator. Clockwise adjustment will raise the stream and counter-clockwise adjustment will lower the stream. For best adjustments, stream should hit the basin 6-1/2" (165mm) from the bubbler.
OPERATION OF QUICK CONNECT FITTINGS SIMPLY PUSH IN TUBE IS SECURED PUSH IN COLLET TUBE TO ATTACH IN POSITION TO RELEASE TUBE
A
C
B
PUSHING TUBE IN BEFORE PULLING IT OUT HELPS TO RELEASE TUBE
FIG. 1
1/4" O.D. TUBE WATER INLET TO COOLER
ACTUATION OF QUICK CONNECT WATER FITTINGS Fountain is provided with lead free connectors which utilize an o-ring water seal. To remove tubing from the fitting, relieve water pressure, push in on gray collar while pulling on the tubing. To insert tubing, push tube straight into the fitting until it reaches a positive stop (approximately 3/4" [19mm]). See Fig. 1.
3/8" O.D. TUBE CONNECT BUILDING WATER COLD WATER SUPPLY INLET
NOTE: WATERFLOW DIRECTION
SERVICE STOP (NOT FURNISHED)
FIG. 2
Elkay 14-5G
(Rev. 4/11)
2222 Camden Court Oak Brook, IL 60523 elkayusa.com
Printed in U.S.A. ©2011 Elkay
