Transcript
MDS 100
LINE MULTIPLIER, SCAN CONVERTER AND
SWITCHER
• • • • • • • • •
5 INPUTS WITH ASSOCIATED AUDIO 2 SIMULTANEOUS CONVERSIONS: PC/TV AND TV/PC WIDE RANGE OF CORRECTIONS AND ADJUSTMENTS MUTE AUDIO FUNCTION ON BOTH OUTPUTS OSD ON BOTH OUTPUTS MAINTENANCE OF PRESETTINGS POSSIBILITY OF RECALLING PRESELECTIONS CAN BE FULLY CONTROLLED BY PC REMOTE CONTROL
MDS100-M
12
1
(28/08/08)
ELPRO BROADCAST s.r.l. Strada della Pronda 17 - TORINO (ITALY) Tel. 0117071955 - FAX 011706210
MDS 100
LINE MULTIPLIER, SCAN CONVERTER AND
SWITCHER 9.0 TECHNICAL DATA
INSTALLATION AND USE OF THE MDS 100 INDEX 1.0 Overview 2.0 Power supply 3.0 Presettings 4.0 Installation 5.0 Selection of sources 6.0 OSD functions
Main input Power consumption Size (WXDXH) Weight Operating temp.range Safety EMC CE mark
7.0 Computer control 8.0 Accessories 9.0 Technical data 10.0 Note
:230Vac 50Hz :15VA :483X210X44 :3Kg :0÷45° :according to EN60065 :according to EN55103-1 and EN55103-2
10.0 NOTE This product is guaranteed for 2 years from the date of purchase. The guarantee does not cover damage to the product caused by improper use or operations effected by third parties
Please read this manual carefully before installing the MDS100.
For the duration of guarantee Elpro shall repair faulty units free of charge. Faulty units must be sent with a standard waybill and CARRIAGE PAID to Elpro’s Turin works. Repaired units shall be returned CARRIAGE FORWARD to the consignee. Faulty units that are no longer covered by guarantee shall be repaired by Elpro EX WORKS Turin and the work shall be charged to the customer.
The manufacturers shall not be answerable for damage resulting from the use, proper or otherwise, of their products. Product data and specifications are subject to change without prior notice.
For any problems regarding installation of the MDS100 call the Elpro hot line 011 705835 oppure E-mail:
[email protected]
ELPRO BROADCAST s.r.l. Strada della Pronda 17 - TORINO (ITALY) Tel. 0117071955 - FAX 011706210
2
11
ELPRO BROADCAST s.r.l.
MDS 100
LINE MULTIPLIER, SCAN CONVERTER AND
SWITCHER 1.0 OVERVIEW
7.0 COMPUTER CONTROL
Thank you for choosing this product. Check that the following items are included in the packaging:
All functions of the MDS100 unit can be controlled by computer. Standard equipment includes two floppy disks containing the application software.
− The MDS unit
Connect the serial port of the computer as illustrated in the drawing below.
− This handbook
− The mains cable
For installation, recalling and available software functions, refer to the instructions provided with the floppy disk.
− IR control
8.0 ACCESSORIES
− Floppy disk with the application software for PC control
The MDS100 unit is provided with the following standard equipment: - The mains cable - Floppy disk with the application software for PC control -IR control
The following equipment is available upon request: VGA cables of various lengths for connection to destination (refer. to list of accessories).
The MDS100 unit comprises two format converters: it can convert the standard TV signal into an SVGA graphic signal and the SVGA signal sent by a computer into the standard Pal and Y/C TV formats. The choice of 3 video inputs and 2 computer inputs with relative associated audio make the MDS100 the ideal solution for multimedial presentations. ELPRO BROADCAST s.r.l.
10
3
ELPRO BROADCAST s.r.l. Strada della Pronda 17 - TORINO (ITALY) Tel. 0117071955 - FAX 011706210
MDS 100
LINE MULTIPLIER, SCAN CONVERTER AND
SWITCHER A single SVGA output towards the video projector is an important feature of presentation systems. Likewise, a Pal or Y/C output for recording or remote forwarding of images is also useful.
RECALL SETTINGS
Recalls the stored settings (8 settings re-callable)
SET DEFAULT PARAMETERS
Returns to standard image parameters
SAVE and EXIT
Exits and saves the settings activated by the input that is currently active.
"System with MDS100"
ATTENTION The SAVE and EXIT function can be activated alternately with inputs PC1 and PC2 in order to always obtain the same image.
6.2 OSD on SVGA output
ELPRO BROADCAST s.r.l. Strada della Pronda 17 - TORINO (ITALY) Tel. 0117071955 - FAX 011706210
4
9
PICTURE ADJUST BRIGHTN CONTRAST SATUR MUTE AUDIO MUTE VIDEO GAMMA CORRECT BORDER COLOURS BORDER VISIBLE
Enables adjustment of image dimensions Enables brightness adjustment Enables contrast adjustment Enables saturation adjustment Sets the output audio level to zero Obscures the image Inserts the Gamma correction on the RGB signals Enables the definition of border colour Inserts image border
ADVANCED FUNCTION: HOR SYNC VER SYNC ALIASING INPUT AMPLIF POOR SIGNAL
H sync polarity setting V sync polarity setting Insertion of the antialiasing filter on the input signal Increases input signal amplitude Enhances image content
SPECIAL EFFECTS: FILTER R FILTER G FILTER B NEGATIVE DIGITIZ NORMAL DEFAULT VALUE
Removes the R signal from the image Removes the G signal from the image Removes the B signal from the image Displays the negative image Reduces image quantization (Solarization) Removes all special effects Returns to standard image parameters
MDS 100
LINE MULTIPLIER, SCAN CONVERTER AND
SWITCHER The following functions can be controlled by means of remote control: 1) 2) 3) 4) 5) 6)
2.0 POWER SUPPLY
Real-time selection of the source to be directed to the Pal output Real-time selection of the source to be directed to the SVGA output Mute audio on the Pal output Mute audio on the SVGA output OSD on the Pal output OSD on the SVGA output
The MDS100 unit must be powered by 230 Vac 50Hz by means of the cable supplied. Plug the cable outlet into the relative panel plug situated to the left of the unit’s rear wall.
ATTENTION OSD on the Pal output is only active if the PC1 or PC2 input has been selected OSD on the SVGA output is only active if the Pal1, Pal2 or Y/C input has been selected Both OSDs are managed by the commands:
SEL (Select),
− ,+ and OFF.
6.1 OSD on Pal output. ATTENTION The first 4 settings adjust the video image DISPLAY ADJ (Horiz. & Vert.) PAN IMAGE (Horiz. & Vert.)
Moves the entire image on the screen Scrolls the image across the screen
H Scale ratio V Scale ratio Zoom Image
Expands the image horizontally Expands the image vertically Zooms in onto the image
The panel plug is equipped with a fuse-holder for 5X20 fuses. In the event of fuse burnout, the replacement fuse must be of the same value, as specified on the back of the unit. ATTENTION
ATTENTION With Zoom Image set to ON the PAN IMAGE can be used to display a specific area of the image. BRIGHTNESS (4 levels) Adjusts image brightness ANTIFLICKER (8 levels) Controls the antiflicker function FREEZE Freezes the image CHROMA FILTER Restricts the chrominance band ENHANCE SVIDEO COLOUR Enhances the colours on the Y/C output BLACK/WHITE Sets the image to B/W BARS Generates bars to 75% MUTE AUDIO Sets the Pal output audio to zero SAVE SETTINGS
All operations must be performed by specialized personnel who must be made aware of electric shock hazards. In some countries the current plug must be adapted to comply with local standard types. Wires can be identified according to the following code: -Brown -Blue -Yellow/Green
ATTENTION Grounding is compulsory
Saves the video image adjustment settings (8 settings possible))
ELPRO BROADCAST s.r.l.
PHASE (Marked with the letter L, may be red) NEUTRAL (Marked with the letter N, may be black ) GROUND (Marked with the letter E, may be green)
8
5
ELPRO BROADCAST s.r.l. Strada della Pronda 17 - TORINO (ITALY) Tel. 0117071955 - FAX 011706210
MDS 100
LINE MULTIPLIER, SCAN CONVERTER AND
SWITCHER 5.0 SELECTION OF SOURCES
3.0 PRESETTINGS The unit hardware has no jumper presettings. All functions are controlled by means of the keyboard and OSD (On Screen Display) or by the PC, using the connection software provided with the unit.
The sources must be selected separately for each of the 2 outputs.
4.0 INSTALLATION a) Check that all units to be installed are disconnected. b) Connect the Pal sources to the two RCA sockets marked Pal1 IN and Pal2 IN ATTENTION VHS as source could not be visualized correctly on a LCD destination
ATTENTION Selection is sequential and is effected by means of a pushbutton.
c) Connect the Y/C source to the mini-Din connector marked Y/C IN d) Connect the computer sources to the HDD15p.f. connectors marked SVGA IN PC1 and PC2 e) Connect the computer destination (video projector or multiscan monitor) to the HDD15p.f. connector marked SVGA OUT and the TV standard destination to the RCA and 4-pin mini-Din connectors marked VIDEO OUT Pal and Y/C.
When one of the 5 leds that represent the various inputs lights up, this indicates which input is present to the output. ATTENTION If PC inputs are selected on the SVGA output, these move towards the output without any further processing.
ATTENTION If the destination is a device LCD a VHS input could not be visualized correctly
If PAL and Y/C inputs are selected towards the Pal and Y/C output, these move towards the output without any further processing.
If the length of the cable used to connect the computer destination exceeds 10m. we recommend the use of an INBOX/4 as amplifier
When the unit is switched on, the Pal1 input is automatically activated on both outputs.
6.0 OSD FUNCTIONES (On Screen Display)
If the length of the cable used to connect the TV destination exceeds 30m. we recommend the use of a DA124 as amplifier/distributor
OSD, for both outputs, can be controlled by means of the remote control provided. For real-time use, the MUTE AUDIO on each output can also be controlled from the keyboard. ATTENTION Hold down the selection key for 3 seconds to activate mute audio on the output
f) Connect the stereo audio output from the 5 sources to the 5 stereo RCA sockets marked AUDIO IN. g) Connect the AUDIO OUT stereo audio outputs to the destinations, bearing in mind that the contents of the 2 outputs may differ. h) Connect the control PC as described in chapter 7.0, if required. i) Make the Vac power supply connections as described in chapter 2.0 and check on the front panel that the leds related to the Pal1 input for both outputs light up. j) Energize the sources and destinations. The source connected to the Pal1 input must be displayed on both destinations.
ELPRO BROADCAST s.r.l. Strada della Pronda 17 - TORINO (ITALY) Tel. 0117071955 - FAX 011706210
Hold down the selection key for a further 3 seconds to deactivate mute mode. The remote control can be deactivated and reactivated from the keyboard. ATTENTION Hold down both selection keys to deactivate remote control. Hold down the selection keys for a further 3 seconds to reactivate remote control.
6
7
MDS 100
MDS 100
LINE MULTIPLIER, SCAN CONVERTER AND
LINE MULTIPLIER, SCAN CONVERTER AND
SWITCHER
SWITCHER
5.0 SELECTION OF SOURCES The sources must be selected separately for each of the 2 outputs.
be visualized correctly on a LCD destination
ATTENTION Selection is sequential and is effected by means of a pushbutton.
c) Connect the Y/C source to the mini-Din connector marked Y/C IN d) Connect the computer sources to the HDD15p.f. connectors marked SVGA IN PC1 and PC2 e) Connect the computer destination (video projector or multiscan monitor) to the HDD15p.f. connector marked SVGA OUT and the TV standard destination to the RCA and 4-pin mini-Din connectors marked VIDEO OUT Pal and Y/C.
When one of the 5 leds that represent the various inputs lights up, this indicates which input is present to the output. ATTENTION If PC inputs are selected on the SVGA output, these move towards the output without any further processing.
ATTENTION If the destination is a device LCD a VHS input could not be visualized correctly
If PAL and Y/C inputs are selected towards the Pal and Y/C output, these move towards the output without any further processing.
If the length of the cable used to connect the computer destination exceeds 10m. we recommend the use of an INBOX/4 as amplifier
When the unit is switched on, the Pal1 input is automatically activated on both outputs.
6.0 OSD FUNCTIONES (On Screen Display)
If the length of the cable used to connect the TV destination exceeds 30m. we recommend the use of a DA124 as amplifier/distributor
OSD, for both outputs, can be controlled by means of the remote control provided. For real-time use, the MUTE AUDIO on each output can also be controlled from the keyboard. ATTENTION Hold down the selection key for 3 seconds to activate mute audio on the output
f) Connect the stereo audio output from the 5 sources to the 5 stereo RCA sockets marked AUDIO IN. g) Connect the AUDIO OUT stereo audio outputs to the destinations, bearing in mind that the contents of the 2 outputs may differ. h) Connect the control PC as described in chapter 7.0, if required. i) Make the Vac power supply connections as described in chapter 2.0 and check on the front panel that the leds related to the Pal1 input for both outputs light up. j) Energize the sources and destinations. The source connected to the Pal1 input must be displayed on both destinations.
Hold down the selection key for a further 3 seconds to deactivate mute mode. The remote control can be deactivated and reactivated from the keyboard. ATTENTION Hold down both selection keys to deactivate remote control. Hold down the selection keys for a further 3 seconds to reactivate remote control.
6
7
ELPRO BROADCAST s.r.l. Strada della Pronda 17 - TORINO (ITALY) Tel. 0117071955 - FAX 011706210
MDS 100
LINE MULTIPLIER, SCAN CONVERTER AND
SWITCHER The following functions can be controlled by means of remote control: 1) 2) 3) 4) 5) 6)
2.0 POWER SUPPLY
Real-time selection of the source to be directed to the Pal output Real-time selection of the source to be directed to the SVGA output Mute audio on the Pal output Mute audio on the SVGA output OSD on the Pal output OSD on the SVGA output
The MDS100 unit must be powered by 230 Vac 50Hz by means of the cable supplied. Plug the cable outlet into the relative panel plug situated to the left of the unit’s rear wall.
ATTENTION OSD on the Pal output is only active if the PC1 or PC2 input has been selected OSD on the SVGA output is only active if the Pal1, Pal2 or Y/C input has been selected Both OSDs are managed by the commands:
SEL (Select),
− ,+ and OFF.
6.1 OSD on Pal output. ATTENTION The first 4 settings adjust the video image DISPLAY ADJ (Horiz. & Vert.) PAN IMAGE (Horiz. & Vert.)
Moves the entire image on the screen Scrolls the image across the screen
H Scale ratio V Scale ratio Zoom Image
Expands the image horizontally Expands the image vertically Zooms in onto the image
The panel plug is equipped with a fuse-holder for 5X20 fuses. In the event of fuse burnout, the replacement fuse must be of the same value, as specified on the back of the unit. ATTENTION
ATTENTION With Zoom Image set to ON the PAN IMAGE can be used to display a specific area of the image. BRIGHTNESS (4 levels) Adjusts image brightness ANTIFLICKER (8 levels) Controls the antiflicker function FREEZE Freezes the image CHROMA FILTER Restricts the chrominance band ENHANCE SVIDEO COLOUR Enhances the colours on the Y/C output BLACK/WHITE Sets the image to B/W BARS Generates bars to 75% MUTE AUDIO Sets the Pal output audio to zero SAVE SETTINGS
All operations must be performed by specialized personnel who must be made aware of electric shock hazards. In some countries the current plug must be adapted to comply with local standard types. Wires can be identified according to the following code: -Brown -Blue -Yellow/Green
ATTENTION Grounding is compulsory
Saves the video image adjustment settings (8 settings possible))
ELPRO BROADCAST s.r.l. Strada della Pronda 17 - TORINO (ITALY) Tel. 0117071955 - FAX 011706210
PHASE (Marked with the letter L, may be red) NEUTRAL (Marked with the letter N, may be black ) GROUND (Marked with the letter E, may be green)
8
5
MDS 100
MDS 100
LINE MULTIPLIER, SCAN CONVERTER AND
LINE MULTIPLIER, SCAN CONVERTER AND
SWITCHER
SWITCHER
A single SVGA output towards the video projector is an important feature of presentation systems. Likewise, a Pal or Y/C output for recording or remote forwarding of images is also useful.
RECALL SETTINGS
Recalls the stored settings (8 settings re-callable)
SET DEFAULT PARAMETERS
Returns to standard image parameters
SAVE and EXIT
Exits and saves the settings activated by the input that is currently active.
ATTENTION The SAVE and EXIT function can be activated alternately with inputs PC1 and PC2 in order to always obtain the same image.
6.2 OSD on SVGA output
4
9
PICTURE ADJUST BRIGHTN CONTRAST SATUR MUTE AUDIO MUTE VIDEO GAMMA CORRECT BORDER COLOURS BORDER VISIBLE
Enables adjustment of image dimensions Enables brightness adjustment Enables contrast adjustment Enables saturation adjustment Sets the output audio level to zero Obscures the image Inserts the Gamma correction on the RGB signals Enables the definition of border colour Inserts image border
ADVANCED FUNCTION: HOR SYNC VER SYNC ALIASING INPUT AMPLIF POOR SIGNAL
H sync polarity setting V sync polarity setting Insertion of the antialiasing filter on the input signal Increases input signal amplitude Enhances image content
SPECIAL EFFECTS: FILTER R FILTER G FILTER B NEGATIVE DIGITIZ NORMAL DEFAULT VALUE
Removes the R signal from the image Removes the G signal from the image Removes the B signal from the image Displays the negative image Reduces image quantization (Solarization) Removes all special effects Returns to standard image parameters
ELPRO BROADCAST s.r.l. Strada della Pronda 17 - TORINO (ITALY) Tel. 0117071955 - FAX 011706210
MDS 100
LINE MULTIPLIER, SCAN CONVERTER AND
SWITCHER 1.0 OVERVIEW
7.0 COMPUTER CONTROL
Thank you for choosing this product. Check that the following items are included in the packaging:
All functions of the MDS100 unit can be controlled by computer. Standard equipment includes two floppy disks containing the application software. Connect the serial port of the computer as illustrated in the drawing below.
For installation, recalling and available software functions, refer to the instructions provided with the floppy disk.
8.0 ACCESSORIES The MDS100 unit is provided with the following standard equipment: - The mains cable - Floppy disk with the application software for PC control -IR control The following equipment is available upon request: VGA cables of various lengths for connection to destination (refer. to list of accessories).
ELPRO BROADCAST s.r.l. Strada della Pronda 17 - TORINO (ITALY) Tel. 0117071955 - FAX 011706210
10
3
MDS 100
LINE MULTIPLIER, SCAN CONVERTER AND
SWITCHER 9.0 TECHNICAL DATA Inputs
INDEX 1.0 Overview
VIDEO: :N°2 CVBS with RCA socket N°1 Y/C with Mini-Din N°2 PC with HDD15 p.f. PC formats compatibility: up to 1024X768 70Hz N.I.
Outputs :2, indipendent as follows: ⇒ High resolution: SVGA 800x600 50Hz with HDD15p.f. Sync level: TTL Sync polarity: selectable by RS232 or IR control
2.0 Power supply 3.0 Presettings 4.0 Installation
⇒
5.0 Selection of sources
Standard TV: Pal+Y/C with BNC and mini-Din 4p.
6.0 OSD functions Main input Power consumption Size (WXDXH) Weight Operating temp.range Safety EMC CE mark
7.0 Computer control 8.0 Accessories 9.0 Technical data 10.0 Note
AUDIO: :N°5 stereo with RCA socket Input coupling :AC, unbalanced Input impedance :47KΩ Input level :+11 dBm Max. Gain :-0.5dB Frequency response :-1 dB from 40Hz to 20KHz Crosstalk :60 dB at 5 KHz Distortion :<0.03% at 0dBm with 10KΩ load Outputs :2, separated (1 related to output Pal, 1 related to output SVGA) Output load :10KΩ nominal, 600Ω min. Output impedance :100Ω Inputs
:230Vac 50Hz :15VA :483X210X44 :3Kg :0÷45° :according to EN60065 :according to EN55103-1 and EN55103-2
10.0 NOTE This product is guaranteed for 2 years from the date of purchase. The guarantee does not cover damage to the product caused by improper use or operations effected by third parties
Please read this manual carefully before installing the MDS100.
For the duration of guarantee Elpro shall repair faulty units free of charge. Faulty units must be sent with a standard waybill and CARRIAGE PAID to Elpro’s Turin works. Repaired units shall be returned CARRIAGE FORWARD to the consignee. Faulty units that are no longer covered by guarantee shall be repaired by Elpro EX WORKS Turin and the work shall be charged to the customer.
The manufacturers shall not be answerable for damage resulting from the use, proper or otherwise, of their products. Product data and specifications are subject to change without prior notice.
For any problems regarding installation of the MDS100 call the Elpro hot line 011 705835 oppure E-mail:
[email protected]
2
11
ELPRO BROADCAST s.r.l. Strada della Pronda 17 - TORINO (ITALY) Tel. 0117071955 - FAX 011706210
INDEX OF ACCESSORIES INFOVIDEO LINE Cod. ELPRO
Description
− ADC 101MM
Cable HDD 15 p. m./m. 1,5 mt.
− ADC 101 − ADC 105 − ADC 110 − ADC 120 − ADC 130
Cable HDD 15 p. m./f. 1,5 mt. Cable HDD 15 p. m./f. 5,0 mt. Cable HDD 15 p. m./f. 10,0 mt. Cable HDD 15 p. m./f. 20,0 mt. Cable HDD 15 p. m./f. 30,0 mt.
− ADC 201 − ADC 301 − ADC 401 − ADC 402 − ADC 501 − ADC 502
Adapter cable HHD 15 p. m./5 BNC MAC Adapter cable DB 15 p. f./HHD 15 p. m. SUN Adapter cable 13W3 f./HHD 15 p. m. SUN Adapter cable 13W3 m./HHD 15 p. f. SGI Adapter cable 13W3 f./HHD 15 p. m. SGI Adapter cable 13W3 m./HHD 15 p. f.
− ADC 710
Cable for TCR 03 DB 15 p. m./f. 10mt.
− ADM 001 − ADM 010
AC Adapter 230 Vac 50Hz 9V 500mA AC Adapter 230 Vac 50Hz 9V 1000mA
− ADP 010 − ADP 101 − ADP 102 − ADP 302
Connector DB 15 p. m. with cover VGA Adapter m./m. VGA Adapter f./f. MAC Adapter plug DB 15 p. m./HHD 15 p. f.
− ADR 2U − ADR 3U
Rack adapter 2U Rack adapter 3U
− ADR 2U BLK − ADR 3U BLK
Blank panel 2U Blank panel 3U
− EP BOX1 − EP RACK1
Kit for wall mounting of EASYPATCH Mounting on 19" of EASYPATCH
• • • • • • • • •
5 INPUTS WITH ASSOCIATED AUDIO 2 SIMULTANEOUS CONVERSIONS: PC/TV AND TV/PC WIDE RANGE OF CORRECTIONS AND ADJUSTMENTS MUTE AUDIO FUNCTION ON BOTH OUTPUTS OSD ON BOTH OUTPUTS MAINTENANCE OF PRESETTINGS POSSIBILITY OF RECALLING PRESELECTIONS CAN BE FULLY CONTROLLED BY PC REMOTE CONTROL
MDS100-M ELPRO BROADCAST s.r.l. Strada della Pronda 17 - TORINO (ITALY) Tel. 0117071955 - FAX 011706210
12
1
(28/08/08)
