Preview only show first 10 pages with watermark. For full document please download

Elpro_she_ip01_user_manual_eng

   EMBED

Share

Transcript

IP CABLING TRANSMISSION – Passive ITEM NO.: IP01 IP01 is a low cost and easy, speedy solution to allow you use existing coax cable to send IP camera signal. Used in pairs with your RG59 cable to exceed the IEEE 802.3 10BaseT NEXT specification. The working range could up to 200 meters at 10Mbps speed. IP01 IP Extender over Coax Send IP camera signal over existing coaxial cable. Passive, no power required. Exceeds 802.3 10BaseT NEXT specification, isolating the receiver from the transmitted signal. Transmission up to 200 meters (Max). z z z z Installation View: Panel View: IP01 Front Rear Specification: ITEM NO. VIDEO INPUT (BNC female Connector) Connector Impedance Crosstalk Cable DIMENSIONS W x H x D mm IP01 1 BNC Female Connector to RJ45 Jack 50Ω to dual 100Ω or 75Ω to dual 100Ω or 93Ω to dual 100Ω > 30 dB Coax Cable (RG59) 69x25x22 1