Transcript
Elite Bluetooth 2D Barcode Reader
ERB-2109
ERB-2109 Elite Bluetooth 2D Image Barcode Reader is the newest innovative, smallest, ergonomic shell design and most functional wireless 2D barcode scanner in the world. ERB-2109 is designed for mobile industries use to capture barcode under 3 operating modes Wireless, Wired and Memory modes. Just like every wireless devices concerned by users, ERB-2109 offer the Bluetooth chip with the fastest connection without PIN code setting. Even though the device is disconnected, it gets back to reconnect in the shortest seconds. For using ERB-2109 in public, turn on the vibrator can remind the operator when the barcode read. With the most concern about power saving, ERB-2109 is designed with a power switch to turn off the power manually for saving power when the device is not going to work for a long time. Turn on power and reconnect with the host only takes very few seconds to work without delay. Wired cable with A Type or Mini USB plugs offered to connect when the power is very low or the operating environment is required only for cables. ERB-2109 offers HID keyboard emulator with very considerable design for users convenience. Charging power and HID reading can exist at the same time for the highest efficiency. The unique design to attach with a camera tripod for ERB-2109 is used for auto-sensing. This makes ERB-2109 to be not only the portable wireless 2D barcode scanners but also the hand-free barcode reader. In any circumstances no matter with or without space, users can use ERB-2109 up to their need. For the temporarily out of connection with the host, ERB-2109 allows the user to save barcodes scanned in the device by program setting. The memory is up to 32KB and the records can be transmitted via barcode setting again. To be the smartest and savviest user, buy one device with multiple functions is the trend and the target in your mind. Choose ERB-2109 to be your next barcode reading device!
Feature • Ergonomic Shell Design • Hand-Free Design for Camera Mini Tripod Matched Up • Capable to Scan the Barcode on a Mobile Phone or Screen with the Computer • Support OCR Scanning • Three Operating Mode for Wireless, Wired and Memory Use • Available to Work under Charge or Work with Power Adapter • One Spot Bluetooth Pairing
• • • • • • •
Hardware Battery Switch Support Mobile OTG Comprehensible LED indicators Friendly Online Setting Support Secure Simple Pairing(SSP) Up to 72 Hrs Standby Vibrator(Optioned)
aidcti
ERB-2109 Specification Bluetooth Class II, v2.1 + EDR compatible 1.1, 1.2 and 2.0, Range: 30ft /10m, Profiles: HID keyboard wedge LEDs Red LED: Good Read Blue LED: Bluetooth Status Green and Amber LED: Battery Status White LED: Sleep Mode Button Single Button to scan barcodes, wake up from Sleeping Mode and One Spot Pairing with Bluetooth Switches Left switch: Battery Off / Battery On Right switch: Bluetooth Mode / USB Mode Operating Modes Bluetooth Mode: Real time data transmission via wireless (HID) Wired Mode: USB Keyboard Mode (HID) Memory Mode: Scans recorded until memory full Scan Modes Trigger Auto Sensing Battery Lithium-ion 950mAh Charging time: Approx. 3 Hours Battery life: Over 3,000 Scans
*1
Image Sensor CMOS 752 x 480 Pixel Light Source LED (630nm ±10nm) Resolution 5mil Interface Supported Wireless for Bluetooth HID Wire for USB Keyboard Emulation (USB Cable included) Memory 32Kb Flash Symbologies 2D: PDF417, QR Code, DataMatrix, Aztec, Maxicode, OCR
*2
1D: Code128, EAN-13, EAN-8, Code39, UPC-A, UPC-E, Codabar, Interleaved 2 of 5, ISBN, Code 93, etc. Ambient Lighting Tolerance Light Intensity: 300 LUX (130mm), Illumination: 0 ~ 100,000 LUX Depth of Scan Field 45mm ~ 450mm (1.78" ~ 17.72") PCS Ratio >= 25% Reading Angle Roll:360°, Pitch:±60°, Yaw(Skew):±60° Weight 70g(2.5oz) Dimensions L86mm x W38mm x H35mm (L3.86” x W1.50” x H1.38”) Power Consumption DC 5V Current Operating : 290mA ~ 330mA (Max) StandBy : 200mA Operating Temperature 0°C to 45°C (32°F to 113°F), 5% ~ 95% (non-condensing) Storage Temperature -20°C to 60°C (-4°F to 140°F), 5% ~ 95% (non-condensing) Impact Resistance Multiple 1.5m/5ft. drops to concrete Sealing IP42 Regulatory EMC: FCC Part 15 Class B, EN 55022, EN 55024, EN 301 489-1, EN 301 489-17 Electrical Safety: EN 60950-1, IEC 60950-1, RoHS Options Vibrator Warranty Two Year limited warranty
*3
35mm
*1 One Scan Per Second, Red Illumination On, Vibrator Off, Trigger Mode
1D Barcode 10mil 55mm
*2 OCR-B 7 Space 2 Type
210mm
36˚
*3 Available in the North America and EU territories. Elsewhere 1 year limited warranty
50mm
2D Barcode 10mil
60mm
aidcti.com
170mm
1D Barcode 15mil
0mm
50mm
175mm
2D Barcode 15mil
100mm
150mm
205mm
200mm
All specifications are subject to change without notice, All right reserved, All brand, product and service, and trademark names are the property of their registered owner
250mm
