Transcript
EM
EJ-R line level signal onto telephone
broadcast meetings via telephone
passive device
The EJ-R provides a one-way ramp for putting line level audio signals on to a telephone line. Simply hook-up the EJ-R between the base of a telephone and the phone handset, then connect a line level audio signal via the 1/4” jack on the side of the EJ-R, and the audio signal will be placed on the telephone line. Then use either an EJ-10 or the TTIAB to take the signal off the telephone line on the other end Now you have an affordable solution for distance learning in multiple classrooms, or for broadcasting a meeting to multiple locations. The EJ-R is an passive device. No power source is needed to operate the EJ-R. The EJ-R has a switch for muting the telephone handset once a connection is established, thus avoiding ambient noise on the telephone connection. It also comes with a 3” telephone cord to assist in making the connection between the phone and handset.
Specifications: Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RJ-6 Modular Jacks & 1/4” Mono Phone Jack Input Signal to telephone . . . . . . . . . . . . . . . . . . . . . . . . . . Transformer balanced line level Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Hz to 20kHz Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steel case with black powdercoat finish Dimensions (L x W x H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.75” x 2.5” x 1.25” Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 oz.
EJ-R Accessory Cables: Emtech offers an accessory cable for the EJ-R to help complete connections between the EJ-R and a line level source. The accessory cable is: 16-305
5 ft. 3.5mm Mono Jack to 1/4” Mono Phono Jack. For when line level out from your source uses a 3.5mm Phone Jack.
Warranty: Emtech Electronics, Inc. warrants the Model EJ-R for a period of two years, from the original date of purchase, against defects in parts and workmanship. If a defect occurs, the unit will be repaired or replaced, at our option, free of all charges if delivered prepaid to the factory. Warranty does not extend to finish, appearance, abuse or defects due to the misuse or operation under other than specified conditions, nor does it extend to incidental or consequential damages. Repair by anyone other than Emtech will void the warranty. ©Emtech Electronics, Inc. 1126 No. 1200 West Orem, UT 84057 1-866-200-2878 www.emtechelectronics.com
