Transcript
Emergency Stop Relays, Safety Gate Monitors Category 3, EN 954-1 PNOZ X5 Technical Details Electrical Data Supply Voltage Tolerance
Emergency stop relay and safety gate monitor in accordance with VDE 0113-1, 11/98, EN 60204-1, 12/97 and IEC 204-1, 11/98.
Features ● Single-channel or dual-channel operation without detection of shorts across the input contacts ● Designed for operation using semiconductor outputs ● 12 VDC version available for automotive applications
Approvals PNOZ X5 ● ● ●
PNOZ X5
AC: 24 V DC: 12, 24 V 24 VAC/DC: 85 ... 110 % 12 VDC: 80 ... 120 % 24 V: 160 %, 12 V: 20 % Approx. 2 W/3 VA 24 VDC/25 mA, 12 VDC/60 mA
1
Residual Ripple DC Power Consumption Voltage and Current at the Input and Reset Circuits and Feedback Control Loop Switching Capability in accordance with EN 60947-4-1, 10/91 AC1: 240 V/6 A/1500 VA DC1: 24 V/4 A/100 W EN 60947-5-1, 10/91 (DC13: 6 cycles/min.) AC15: 230 V/5 A; DC13: 24 V/4A Output Contacts 2 safety contacts (N/O) Contact Fuse Protection 6 A quick or 4 A slow (EN 60947-5-1, 10/91) Times Delay-on Energisation Automatic reset : 24 VAC/DC: max. 150 ms 12 VDC: max. 250 ms Manual reset : 24 VAC/DC: max. 100 ms 12 VDC: max. 150 ms Delay-on De-energisation K1, K2 24 VAC/DC: max. 30 ms 12 VDC: max. 30 ms Recovery Time Approx. 1 s Simultaneity channel 1/2 ¥ Max. Supply Interruption before De-energisation Approx. 10 ms Mechanical Data Maximum Cross Section of 2 x 1.5 mm 2 or 1 x 2.5 mm2 External Conductors Single-core or multi-core with crimp connectors Dimensions (H x W x D) 87 x 22.5 x 122 mm Weight 225 g
Description
Operating Modes
● 22.5 mm, S-95 housing, DIN-Rail mounting ● Relay outputs, positive-guided: 2 safety contacts (N/O) ● Connections for – E-STOP button – safety gate limit switch – reset button ● LEDs for channel 1, channel 2 and power ● Increase in the number of safety contacts available by connecting expander modules.
● ● ● ●
Pilz GmbH & Co., Felix-Wankel-Straße 2, 73760 Ostfildern, Deutschland Telefon +49 (7 11) 34 09-0, Telefax +49 (7 11) 34 09-1 33, E-Mail:
[email protected]
Single-channel operation Dual-channel operation Automatic reset Manual reset
NSG-D-2-035-07/01
1-1
Emergency Stop Relays, Safety Gate Monitors Category 3, EN 954-1 PNOZ X5 ● Increase in safety contacts The number of output contacts can be increased by using expander modules or relays/contactors with positive-guided contacts.
Internal Wiring Diagram Input circuits UB Reset circuit A1 (L+) A2 (L-) S11 S33 S34 S22 S12 S12
1
Start Unit
Safety contacts 13 23
1L1
K1
K4
Start Unit
S33
K2
K5 S34
13
14 24 14
External Wiring
K4
● Example 1 Dual-channel E-STOP wiring with manual reset.
● Example 4 Dual-channel safety gate control with manual reset.
1L2
S33
S12
S33
S11
K5
S1
S1 S3
S11
S3
S2
S22
S34
S12 S22
● Example 2 Dual-channel E-STOP wiring with automatic reset. S11 S33
S1
S34
– Key
S1/2:
E-STOP or safety gate switch
S3:
Reset button Switch operated Gate open
S12 S22 S34
Gate closed
● Example 3 Single-channel E-STOP wiring with manual reset. S11
S33
S12
S1 S3
S12 S22
S34
Pilz GmbH & Co., Felix-Wankel-Straße 2, 73760 Ostfildern, Deutschland Telefon +49 (7 11) 34 09-0, Telefax +49 (7 11) 34 09-1 33, E-Mail:
[email protected]
NSG-D-2-035-07/01
Emergency Stop Relays, Safety Gate Monitors Category 3, EN 954-1 PNOZ X5 General Technical Data Unless stated otherwise in the technical details for the specific unit Electrical Data Frequency Range AC Residual Ripple DC Contact Material Continuous Duty Environmental Data EMC Vibration in accordance with EN 60068-2-6, 04/95 Climatic Suitability Airgap Creepage Ambient Temperature Storage Temperature Mechanical Data Torque Setting on Connection Terminals Mounting Position Housing Material Protection
1
50 ... 60 Hz 160 % AgSnO2 100 % EN 50081-1, 01/92, EN 50082-2, 03/95 Frequency: 10 ... 55 Hz, Amplitude: 0.35 mm DIN IEC 60068-2-3, 12/86 DIN VDE 0110 part 1, 04/97 -10 ... +55 °C -40 ... +85 °C 0.6 Nm (screws) Any Thermoplast Noryl SE 100 Mounting: IP 54 Housing: IP 40 Terminal Range: IP 20
The units were tested in accordance with the relevant standards current at the time of development. Order References Type PNOZ X5
UB 24 V DC
Pilz GmbH & Co., Felix-Wankel-Straße 2, 73760 Ostfildern, Deutschland Telefon +49 (7 11) 34 09-0, Telefax +49 (7 11) 34 09-1 33, E-Mail:
[email protected]
Order No. 774 325
NSG-D-2-035-07/01
1-3
