Transcript
PRODUCT C ATA L O G
For over 40 years, Eminence loudspeakers have been the brand of choice in audio systems, musical instrument amplifiers, and enclosures throughout the world. From your local VFW Hall, Moose Lodge and church, to aircraft carriers, NFL and soccer league stadiums, NBA and NCAA arenas, and on the road with today’s greatest artists, no other loudspeaker brand has been so widely depended upon for performance and reliability.
Today, manufacturers in these industries live in a world of global manufacturing and marketing. To remain competitive, you must manufacture your products in locations that provide exceptional pricing on labor and components, and that are logistically situated for shipping your products efficiently.
The Eminence Dongguan factory is an integral part of our expansion into the global world of manufacturing. It began as our effort to provide our customers with a respected brand
EMINENCE DONGGUAN High-quality, custom solutions with on-time delivery.
of quality loudspeakers in China. Now, with the addition of our St. Louis Design Center and our Eminence Dongguan Cabinet Shop, Eminence can also provide manufacturers with complete design and manufacturing of your guitar and bass amplifiers, and professional audio enclosures.
You’ve come to trust Eminence for quality loudspeakers. You can also trust Eminence to take your complete product from concept to market. From communication, state-of-theart design, quality, delivery, and support after the sale, Eminence is now your complete manufacturing solution.
CONTENTS PRO AUDIO SPEAKERS . . . . . . . . . . . . . . 4 HF DRIVERS AND COMPONENTS . . . . . . 10 GUITAR SPEAKERS . . . . . . . . . . . . . . . . . 11 BASS GUITAR SPEAKERS. . . . . . . . . . . . . 14 AMPLIFIERS & ENCLOSURES. . . . . . . . . . 16
* FOR SPECIFICATIONS ON ALTERNATIVE IMPEDANCES, PLEASE CONTACT YOUR EMINENCE REPRESENTATIVE. ** MULTIPLE UNITS EXCEED PUBLISHED RATING EVALUATED UNDER EIA 426A NOISE SOURCE AND TEST STANDARD WHILE IN A FREE-AIR, NON TEMPERATURECONTROLLED ENVIRONMENT. *** THE AVERAGE OUTPUT ACROSS THE USABLE FREQUENCY RANGE WHEN APPLYING 1W/1m INTO THE NOMINAL IMPEDANCE. IE: 2.83 V/8 OHMS, 4 V/16 OHMS. EMINENCE RESPONSE CURVES ARE MEASURED UNDER THE FOLLOWING CONDITIONS: ALL SPEAKERS ARE TESTED AT 1W/1m USING A VARIETY OF TEST SET-UPS FOR THE APPROPRIATE IMPEDANCE | LMS USING 0.25” SUPPLIED MICROPHONE (SOFTWARE CALIBRATED) MOUNTED 1m FROM WALL/BAFFLE | 2 ft. X 2 ft. BAFFLE IS BUILT INTO THE WALL WITH THE SPEAKER MOUNTED FLUSH AGAINST A STEEL RING FOR MINIMUM DIFFRACTION | HAFLER P1500 TRANS-NOVA AMPLIFIER | 2700 cu. ft. CHAMBER WITH FIBERGLASS ON ALL SIX SURFACES (THREE WITH CUSTOM-MADE WEDGES).
2
3
PRO AUDIO
EPA-C3015
The global economy is faced with some very unique and long-term challenges. Consumers remain skeptical, frightened, and cautious.
EPA-C3015LF
EPA-C3018
EPA-C3018LF
EPA-CHP3018LF
SPECIFICATION
EPA-C3015
EPA-C3015LF
EPA-C3018
EPA-C3018LF
EPA-CHP3018LF
Nominal Basket Diameter
15’’, 381mm
15’’, 381mm
18’’, 457mm
18”, 457mm
18”, 457mm
Nominal Impedance*
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
Power Rating** Watts
450W
550W
425W
600W
700W
Resonance
35Hz
35Hz
29Hz
32Hz
34Hz
Usable Frequency Range
53Hz-2.6kHz
42Hz-2.4kHz
40Hz-1.0kHz
39Hz-1kHz
35Hz-650Hz
Sensitivity***
98
97
97.7
97.7
99
Magnet Weight
80oz
105oz
80oz
105oz
120oz
Gap Height
.39’’,9.91mm
.39’’,9.91mm
.39’’,10.01mm
.39”,10.01mm
.39”,10.01mm
Voice Coil Diameter
3.0’’,76.2mm
3.0’’,76.2mm
3.0’’,76.2mm
3.0”,76.2mm
3.0”,76.2mm
Never before has it been more important to position your
THIELE & SMALL PARAMETERS
products through competitive pricing and the inclusion of
Resonant Frequency (fs)
35Hz
35Hz
29Hz
32Hz
34Hz
name brand components.
DC Resistance (Re)
5.8
6.9
5.7
6.9
6.4
Coil Inductance (Le)
1.17mH
1.66mH
1.16mH
1.64mH
1.43mH
Mechanical Q (Qms)
11.80
13.52
6.43
7.53
10.55
Electromagnetic Q (Qes)
.39
.32
.43
.41
.34
Total Q (Qts)
.37
.31
.40
.39
.33
Compliance Equivalent Volume (Vas)
286.73 ltr./10.12cu.ft.
251.85 ltr./8.89cu.ft.
521.72 ltr./18.42cu.ft.
385.72 ltr./13.62 cu.ft.
385.28 ltr./13.60 cu.ft.
Peak Diaphragm Displacement Volume (Vd)
397.72cc
561.99cc
538.30cc
766.00cc
688.00cc
Mechanical Compliance of Suspension (Cms)
.28mm/N
.24mm/N
.27mm/N
.20mm/N
.20mm/N
BL Product (BL)
15.7 T-M
20.1 T-M
16.6 T-M
20.4 T-M
21.2 T-M
Diaphragm Mass Inc. Airload (Mms)
73.4 grams
86.7 grams
114.0 grams
122.7 grams
112.2 grams
Efficiency Bandwidth Product (EBP)
92
108
67
78
99
Maximum Linear Excursion (Xmax)
4.6mm
6.5mm
4.6mm
6.5mm
5.8mm
Surface Area of Cone (Sd)
864.6cm2
864.6cm2
1178.0cm2
1178.0cm2
1178.0cm2
Maximum Mechanical Limit (Xlim)
12.0mm
13.0mm
9.5mm
12.20mm
12.20mm
Sealed
51-113 liters / 1.8-4.0 cu.ft.
Not Recommended
85-156 liters / 3.0-5.5 cu.ft.
68-127 liters / 2.4-4.5 cu.ft.
Not Recommended
Vented
59-116 liters / 2.1-4.1 cu.ft.
59-187 liters / 2.1-6.6 cu.ft.
113-244 liters / 4.0-8.6 cu.ft.
91-255 liters / 3.2-9.0 cu.ft.
85-311 liters / 3.0-11.0 cu.ft.
Overall Diameter
15.32’’, 389.13mm
15.32’’, 389.13mm
18.00’’, 457.20mm
18.00”, 457.20mm
18.00”, 457.20mm
Baffle Hole Diameter
14.00’’, 355.60mm
14.00’’, 355.60mm
16.60’’, 421.64mm
16.60”, 420.62mm
16.60”, 420.62mm
Front Sealing Gasket
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
Rear Sealing Gasket
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
Mounting Holes Diameter
.28’’, 7.11mm
.28’’, 7.11mm
.28’’, 7.11mm
.28’’, 7.11mm
.28’’, 7.11mm
Mounting Holes B.C.D.
14.56’’, 369.82mm
14.56’’, 369.82mm
17.25’’, 438.15mm
17.25’’, 438.15mm
17.25’’, 438.15mm
From sub-woofers and woofers, to mid-bass, and
Depth
6.14’’, 155.96mm
6.57’’, 166.88mm
7.60’’, 193.04mm
8.05”, 204.47mm
7.91”, 200.91mm
midranges, there is an Eminence Dongguan speaker that
Net Weight
17.10 lbs, 7.76 kg
24.80 lbs, 11.25 kg
19.5 lbs, 8.85 kg
21.0 lbs, 9.53 kg
24.8 lbs, 11.25 kg
Coil Construction
Copper
Copper
Copper
Copper
Copper
Coil Former
Polyimide
Polyimide
Polyimide
Polyimide
Polyimide
Magnet Composition
Ferrite
Ferrite
Ferrite
Ferrite
Ferrite
Motor Details
Vented Core, Bumped BackPlate
Vented w/ Extended core
Vented Core, Bumped BackPlate
Vented Core, Bumped BackPlate
Vented w/ Extended Core Bumped
Basket Materials
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Cone Composition
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Cone Edge Composition
Sealed Cloth
Sealed Cloth
Sealed Cloth
Sealed Cloth
Sealed Cloth
Dust Cap Composition
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Treated Paper
In the following pages, you will find Eminence Dongguan professional audio loudspeakers designed to be easily incorporated into your products. Since they are stock designs, they are proven, and manufactured regularly. You can enjoy cost savings and fast production through our economies of scale.
Within our professional models, you will find loudspeakers with cast aluminum frames as well as the more economical stamped frames. Most models incorporate the use of standard ferrite magnets, but you will also notice a nice assortment of loudspeakers using the latest in neodymium magnet technology.
will likely meet your needs. Please also check out our growing section of HF products!
MOUNTING INFORMATION Recommended Enclosure Volume
MATERIALS OF CONSTRUCTION
As always, if one of our stock models does not meet your needs, Eminence remains the leader in custom manufactured loudspeakers, and will be happy to entertain most any sample request.
BackPlate
* PLEASE SEE FOOTNOTES ON PAGE 3 FOR INFORMATION REGARDING NOMINAL IMPEDANCE, POWER RATING AND SENSITIVITY. | ©EMINENCE SPEAKER, LLC
PROUDLY ENGINEERED IN THE USA
WWW.EMINENCE.COM
* PLEASE SEE FOOTNOTES ON PAGE 3 FOR INFORMATION REGARDING NOMINAL IMPEDANCE, POWER RATING AND SENSITIVITY. | ©EMINENCE SPEAKER, LLC
5
PRO AUDIO
EPA-CN2510
EPA-CN2512
EPA-CN2515
EPA-S1506
EPA-S1508
EPA-S1510
EPA-S1512
SPECIFICATION
EPA-CN2510
EPA-CN2512
EPA-CN2515
EPA-S1506
EPA-S1508
EPA-S1510
EPA-S1512
Nominal Basket Diameter
10”, 254mm
12’’, 305mm
15’’, 381mm
6.5’’, 165mm
8’’, 203mm
10’’, 254mm
12’’, 305mm
Nominal Impedance*
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
Power Rating** Watts
225W
225W
225W
100W
125W
125W
125W
Resonance
59Hz
49Hz
39Hz
111Hz
74Hz
50Hz
47Hz
Usable Frequency Range
64Hz-2.5kHz
49Hz-3.5kHz
50Hz-3.7kHz
103Hz-6kHz
52Hz-4.7kHz
84Hz-5kHz
40Hz-5kHz
Sensitivity***
97.5
99.5
100
94.7
93.7
95.3
96.5
Magnet Weight
7oz
7oz
7oz
20oz
20oz
20oz
20oz
Gap Height
.28’’,7.11mm
.28’’,6.99mm
.28’’,6.99mm
.24’’,5.99mm
.24’’,5.99mm
.24’’,5.99mm
.24’’,5.99mm
Voice Coil Diameter
2.5’’,63.5mm
2.5’’,63.5mm
2.5’’,63.5mm
1.5’’,38.1mm
1.5’’,38.1mm
1.5’’,38.1mm
1.5’’,38.1mm
Resonant Frequency (fs)
59Hz
49Hz
39Hz
111Hz
74Hz
50Hz
47Hz
DC Resistance (Re)
5.1
5.1
5.3
6.7
6.8
6.6
6.7
Coil Inductance (Le)
1.06mH
.55mH
1.08mH
.55mH
.62mH
.66mH
.67mH
Mechanical Q (Qms)
7.60
9.29
10.08
9.57
8.30
3.81
5.90
Electromagnetic Q (Qes)
.26
.45
.35
.49
.76
.58
.92
Total Q (Qts)
.25
.43
.34
.47
.70
.50
.79
Compliance Equivalent Volume (Vas)
40.32 ltr./1.42cu.ft.
93.51 ltr./3.30cu.ft.
260.34 ltr./9.19cu.ft.
4.49 ltr./.16cu.ft.
16.66 ltr./.59cu.ft.
80.23 ltr./2.83cu.ft.
113.23 ltr./4.00cu.ft.
Peak Diaphragm Displacement Volume (Vd)
124.40cc
236.66cc
302.61cc
22.30cc
68.10cc
113.00cc
167.20cc
Mechanical Compliance of Suspension (Cms)
.23mm/N
.24mm/N
.25mm/N
.20mm/N
.26mm/N
.46mm/N
.29mm/N
BL Product (BL)
15.25 T-M
12.4 T-M
15.7 T-M
9.8 T-M
8.6 T-M
9.0 T-M
9.2 T-M
Diaphragm Mass Inc. Airload (Mms)
31.77 grams
43.6 grams
66.5 grams
10.3 grams
17.7 grams
22.6 grams
39.1 grams
Efficiency Bandwidth Product (EBP)
228
110
112
225
97
86
51
Maximum Linear Excursion (Xmax)
3.5mm
4.5mm
3.5mm
1.8mm
3.3mm
3.2mm
3.2mm
Surface Area of Cone (Sd)
335.40cm2
525.9cm2
864.6cm2
126.7cm2
214.0cm2
355.4cm2
525.9cm2
Maximum Mechanical Limit (Xlim)
7.5mm
8.5mm
8.5mm
5.0mm
6.5mm
9.0mm
6.7mm
Sealed
Not Recommended
23-59 liters / .8-2.1 cu.ft.
52-88 liters / 1.9-3.1 cu.ft.
2-5 liters / .1-.2 cu.ft.
4-9 liters / .1-.3 cu.ft.
8-35 liters / .3-1.3 cu.ft.
20-51 liters / .7-1.8 cu.ft.
Vented
16-50 liters / .6-1.8 cu.ft.
28-102 liters / 1.0-3.6 cu.ft.
48-110 liters / 1.7-3.9 cu.ft.
5-7 liters / .2-.3 cu.ft.
9-36 liters / .3-1.3 cu.ft.
37-61 liters / 1.3-2.2 cu.ft.
93-147 liters / 3.3-5.2 cu.ft.
Overall Diameter
10.25’’, 260.35mm
12.38’’, 314.45mm
15.32’’, 389.13mm
6.58’’, 167.13mm
8.24’’, 209.30mm
10.11’’, 256.79mm
12.25’’, 311.15mm
Baffle Hole Diameter
9.15”,232.41mm
11.06’’, 280.92mm
14.00’’, 355.60mm
5.60’’, 142.24mm
7.10’’, 180.34mm
9.13’’, 231.90mm
11.00’’, 279.40mm
Front Sealing Gasket
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
Rear Sealing Gasket
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
Mounting Holes Diameter
.28’’, 7.11mm
.28’’, 7.11mm
.28’’, 7.11mm
.22’’, 5.59mm
.22’’, 5.54mm
.23’’, 5.72mm
.25’’, 6.35mm
Mounting Holes B.C.D.
9.73’’, 247.14mm
11.62’’, 295.15mm
14.56’’, 369.82mm
6.14’’, 155.96mm
7.79’’, 197.87mm
9.69’’, 246.13mm
11.72’’, 297.69mm
Depth
4.90’’, 124.46mm
5.90’’, 149.86mm
6.81’’, 172.97mm
2.88’’, 73.15mm
3.30’’, 83.82mm
3.80’’, 96.52mm
4.63’’, 117.60mm
Net Weight
4.6 lbs, 2.09 kg
5.10 lbs, 2.31 kg
5.70 lbs, 2.59 kg
3.94 lbs, 1.79 kg
4.10 lbs, 1.86 kg
4.20 lbs, 1.91 kg
5.02 lbs, 2.28 kg
Coil Construction
Aluminum
Copper
Aluminum
Copper
Copper
Copper
Copper
Coil Former
Polyimide
Polyimide
Polyimide
Polyimide
Polyimide
Polyimide
Polyimide
Magnet Composition
Neo
Neo
Neo
Ferrite
Ferrite
Ferrite
Ferrite
Motor Details
Vented Core
Vented Core
Vented Core
Vented Core, Bumped BackPlate
Vented Core, Bumped BackPlate
Vented Core, Bumped BackPlate
Vented Core, Bumped BackPlate
Basket Materials
Aluminum
Aluminum
Aluminum
Steel
Steel
Steel
Steel
Cone Composition
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Cone Edge Composition
Sealed Cloth
Sealed Cloth
Sealed Cloth
Sealed Cloth
Sealed Cloth
Sealed Cloth
Sealed Cloth
Dust Cap Composition
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Treated Paper
THIELE & SMALL PARAMETERS
MOUNTING INFORMATION Recommended Enclosure Volume
MATERIALS OF CONSTRUCTION
6
* PLEASE SEE FOOTNOTES ON PAGE 3 FOR INFORMATION REGARDING NOMINAL IMPEDANCE, POWER RATING AND SENSITIVITY. | ©EMINENCE SPEAKER, LLC
PROUDLY ENGINEERED IN THE USA
WWW.EMINENCE.COM
* PLEASE SEE FOOTNOTES ON PAGE 3 FOR INFORMATION REGARDING NOMINAL IMPEDANCE, POWER RATING AND SENSITIVITY. | ©EMINENCE SPEAKER, LLC
7
PRO AUDIO
EPA-S1515
EPA-S2012
EPA-S2015
EPA-S2510
EPA-S2512
EPA-S2515
EPA-S3015
SPECIFICATION
EPA-S1515
EPA-S2012
EPA-S2015
EPA-S2510
EPA-S2512
EPA-S2515
EPA-S3015
Nominal Basket Diameter
15’’, 381mm
12’’, 305mm
15’’, 381mm
10’’, 254mm
12’’, 305mm
15’’, 381mm
15’’, 381mm
Nominal Impedance*
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
Power Rating** Watts
125W
200W
200W
275W
300W
300W
425W
Resonance
41Hz
42Hz
34Hz
60Hz
50Hz
44Hz
43Hz
Usable Frequency Range
47Hz-4.2kHz
47Hz-3.8kHz
40Hz-4kHz
70Hz-3.7kHz
60Hz-4.0kHz
52Hz-3.6kHz
44Hz-2.5kHz
Sensitivity***
97.7
96
96.6
98
100
99.5
98
Magnet Weight
20oz
38oz
38oz
56oz
56oz
56oz
80oz
Gap Height
.24’’,5.99mm
.32’’,8.13mm
.32’’,8.13mm
.39’’,10.01mm
.39’’,10.01mm
.39’’,10.01mm
.39’’,10.01mm
Voice Coil Diameter
1.5’’,38.1mm
2.0’’,50.8mm
2.0’’,50.8mm
2.5’’,63.5mm
2.5’’,63.5mm
2.5’’,63.5mm
3.0’’,76.2mm
Resonant Frequency (fs)
41Hz
42Hz
34Hz
60Hz
50Hz
44Hz
43Hz
DC Resistance (Re)
6.7
5.9
6.0
5.7
5.7
5.1
5.8
Coil Inductance (Le)
.68mH
.80mH
.79mH
.60mH
.62mH
.86mH
1.14mH
Mechanical Q (Qms)
3.48
7.07
9.51
7.35
7.48
9.97
7.90
Electromagnetic Q (Qes)
1.19
.57
.78
.36
.41
.45
.44
Total Q (Qts)
.89
.53
.72
.35
.39
.44
.42
Compliance Equivalent Volume (Vas)
272.17 ltr./9.61cu.ft.
124.58 ltr./4.40cu.ft.
336.90 ltr./11.90cu.ft.
42.43 ltr./1.50cu.ft.
103.64 ltr./3.66cu.ft.
192.81 ltr./6.81cu.ft.
180.60 ltr./6.38cu.ft.
Peak Diaphragm Displacement Volume (Vd)
280.20cc
203.52cc
334.6cc
56.90cc
56.90cc
274.90cc
402.70cc
Mechanical Compliance of Suspension (Cms)
.25mm/N
.32mm/N
.32mm/N
.24mm/N
.27mm/N
.19mm/N
.17mm/N
BL Product (BL)
9.3 T-M
11.0 T-M
10.5 T-M
13.2 T-M
12.8 T-M
14.7 T-M
16.9 T-M
Diaphragm Mass Inc. Airload (Mms)
59.2 grams
43.7 grams
66.2 grams
29.3 grams
37.2 grams
69.6 grams
80.6 grams
Efficiency Bandwidth Product (EBP)
35
74
44
165
122
97
98
Maximum Linear Excursion (Xmax)
3.2mm
3.9mm
3.87mm
1.6mm
1.6mm
3.2mm
4.6mm
Surface Area of Cone (Sd)
881.2cm2
525.9cm2
864.6cm2
355.4cm2
525.9cm2
864.6cm2
881.2cm2
Maximum Mechanical Limit (Xlim)
6.5mm
7.5mm
12.0mm
8.0mm
6.5mm
10.0mm
9.0mm
Sealed
54-117 liters / 1.9-4.1 cu.ft.
17-54 liters / .6-1.9 cu.ft.
396-119 liters / 14.0-4.2 cu.ft.
5-17 liters / .2-.6 cu.ft.
10-37 liters / .3-1.3 cu.ft.
28-64 liters / 1.0-2.3 cu.ft.
28-54 liters / 1.0-1.9 cu.ft.
Vented
119-172 liters / 4.2-6.1 cu.ft.
48-91 liters / 1.7-3.2 cu.ft.
82-212 liters / 2.9-7.5 cu.ft.
16-33 liters / .6-1.2 cu.ft.
27-85 liters / 1.0-3.0 cu.ft.
57-130 liters / 2.0-4.6 cu.ft.
54-193 liters / 1.9-6.8 cu.ft.
Overall Diameter
15.15’’, 384.81mm
12.27’’, 311.66mm
15.15’’, 384.81mm
10.13’’, 257.30mm
12.25’’, 311.15mm
15.15’’, 384.81mm
15.16’’, 385.06mm
Baffle Hole Diameter
13.84’’, 351.54mm
11.09’’, 281.69mm
13.84’’, 351.54mm
9.05’’, 229.87mm
11.00’’, 279.40mm
13.84’’, 351.54mm
13.84’’, 351.54mm
Front Sealing Gasket
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
Rear Sealing Gasket
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
Mounting Holes Diameter
.25’’, 6.35mm
.25’’, 6.35mm
.25’’, 6.35mm
.25’’, 6.35mm
.25’’, 6.35mm
.25’’, 6.35mm
.25’’, 6.35mm
Mounting Holes B.C.D.
14.56’’, 369.82mm
11.72’’, 297.69mm
14.56’’, 369.82mm
9.69’’, 246.13mm
11.72’’, 297.69mm
14.56’’, 369.82mm
14.56’’, 369.82mm
Depth
5.62’’, 142.75mm
5.22’’, 132.59mm
6.50’’, 165.10mm
4.00’’, 101.60mm
5.00’’, 127.00mm
6.00’’, 152.40mm
5.83’’, 148.08mm
Net Weight
5.60 lbs, 2.54 kg
7.80 lbs, 3.54 kg
8.60 lbs, 3.90 kg
11.10 lbs, 5.03 kg
11.40 lbs, 5.17 kg
12.30 lbs, 5.58 kg
17.40 lbs, 7.89 kg
Coil Construction
Copper
Copper
Copper
Aluminum
Aluminum
Copper
Copper
Coil Former
Polyimide
Polyimide
Polyimide
Polyimide
Polyimide
Polyimide
Polyimide
Magnet Composition
Ferrite
Ferrite
Ferrite
Ferrite
Ferrite
Ferrite
Ferrite
Motor Details
Vented Core, Bumped BackPlate
Vented Core
Vented w/ Extended Core
Vented Core
Vented Core
Vented Core
Vented Core, Bumped BackPlate
Basket Materials
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Cone Composition
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Cone Edge Composition
Sealed Cloth
Sealed Cloth
Sealed Cloth
Sealed Cloth
Sealed Cloth
Sealed Cloth
Sealed Cloth
Dust Cap Composition
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Treated Paper
THIELE & SMALL PARAMETERS
MOUNTING INFORMATION Recommended Enclosure Volume
MATERIALS OF CONSTRUCTION
8
* PLEASE SEE FOOTNOTES ON PAGE 3 FOR INFORMATION REGARDING NOMINAL IMPEDANCE, POWER RATING AND SENSITIVITY. | ©EMINENCE SPEAKER, LLC
PROUDLY ENGINEERED IN THE USA
WWW.EMINENCE.COM
* PLEASE SEE FOOTNOTES ON PAGE 3 FOR INFORMATION REGARDING NOMINAL IMPEDANCE, POWER RATING AND SENSITIVITY. | ©EMINENCE SPEAKER, LLC
9
HF PRODUCTS
GUITAR
DRIVERS
It is no secret; musicians are a very unique group of people. Guitarists and bassist alike specialize in a life-long quest to master an instrument and demonstrate a unique individuality.
COMPONENTS
SPECIFICATION
ASD:1001
B2S ADAPTOR
TOP HAT-CH
Throat Size
1", 25.4mm
Converts bolt-on driver to
Adjustable-angle speaker
Nominal Impedance*
8 ohms
accept a screw-on horn.
stand receptacle for
Power Rating**
50W
2x 1/4-20 or 3x M6 driver
loudspeaker boxes. Vertical
Resonance
1.23kHz
to 1 3/8” 18NEF ext. horn.
angle can be adjusted in 4º
Usable Frequency Range
2.5kHz-20kHz
increments to +/- 18º. Fits
Recommended Crossover
2.5kHz/18dB
SPS56B and most other
Sensitivity***
105dB
standard speaker stands.
Magnet Weight
12 oz, .34 kg
Internal Ø 36mm. Black
remain on a lifetime quest for the ultimate tone; always searching for the ideal
Voice Coil Diameter
1.3", 33mm
Polyamide. Patent pending.
Diaphragm Material
Titanium
guitar, amplifier, effects units, pick-ups, strings, speakers, and even cables.
Re
6.7
MOUNTING INFORMATION
&
BASS
S P E A K ER S
Some guitarists are just naturally blessed with talent. They devote countless hours perfecting their craft, but they make it look easy. Many of them can take a $50.00 guitar and a dime store amplifier and still sound awesome. Other artists can play the same equipment and never be satisfied with the results. They
The most overlooked tool in the tone toolbox is the loudspeaker. Nothing short of
Overall Diameter
3.5", 88.9mm
Depth
2.45", 62mm
Weight
2 lbs, 0.9 kg
Mounting Thread
1 3/8" 18 NEF ext.
changing amplifiers or guitars can make such a difference in your tone.
The guitar speaker is the last element in the tone chain delivering the sound of your product to the audience. It has a detrimental impact on your overall coloration, articulation, low-end, midrange, highs, shape and extension, and ability to cut through any mix. The speaker can offer you a deep, rich mellow flavor, an articulate, percussive and driving clean sound, or a growling, howling guitar on fire.
In the following pages, Eminence presents over 10 unique specifications for Electric Guitar, and Bass. We’ve made more custom guitar and bass speakers than anyone else in the world. We understand tone and have one that’s right for your product.
HORN FLARES SPECIFICATION
APT:200
H290S
BH410
Type
Radial
Radial
Exponential
Throat Size
1”, 25mm
1", 25mm
1", 25mm
Dispersion
90 x 90
90 x 40
60 x 60
Lowest Rec. Crossover
1.5kHz
1kHz
1kHz
Width/Height/Depth
5.9" x 5.9" x 5.1”
11.7" x 6.6" x 6.6"
5.59" x 5.59" x 4.38"
Width/Height/Depth (mm)
150 x 150 x 129.5mm
297 x 168 x 168mm
141.9 x 141.9 x 111.2mm
Cut-out
4.25" x 4.5", 108 x 114mm
9.7" x 4.9", 246 x 124mm
3.56" x 3.56", 90.4 x 90.4mm
Weight
2.5 lbs, 1136 grams
1.1 lbs, 500 grams
.35 lbs, 159 grams
10
* PLEASE SEE FOOTNOTES ON PAGE 3 FOR INFORMATION REGARDING NOMINAL IMPEDANCE, POWER RATING AND SENSITIVITY. | ©EMINENCE SPEAKER, LLC
PROUDLY ENGINEERED IN THE USA
WWW.EMINENCE.COM
* PLEASE SEE FOOTNOTES ON PAGE 3 FOR INFORMATION REGARDING NOMINAL IMPEDANCE, POWER RATING AND SENSITIVITY. | ©EMINENCE SPEAKER, LLC
11
GUITAR SPEAKERS
EGTR-S108
EGTR-S1010
EGTR-S1510
EGTR-S1012
EGTR-S1712
EGTR-SA1712
SPECIFICATION
EGTR-S108
EGTR-S1010
EGTR-S1510
EGTR-S1012
EGTR-S1712
EGTR-SA1712
Nominal Basket Diameter
8’’, 203mm
10’’, 254mm
10’’, 254mm
12’’, 305mm
12’’, 305mm
12’’, 305mm
Nominal Impedance*
8 ohms
4 or 8 ohms
8 ohms
8 ohms
8 or 16 ohms
8 or 16 ohms
Power Rating** Watts
30W
30W
50W
35W
75W
100W
Resonance
101Hz
147Hz
109Hz
104Hz
87Hz
98Hz
Usable Frequency Range
100Hz-6.5kHz
100Hz-5.5kHz
80Hz-4kHz
80Hz-5kHz
80Hz-4.5kHz
80Hz-4.5kHz
Sensitivity***
94.5
99.1
99.7
100.2
100.8
100
Magnet Weight
9oz
15oz
34oz
15oz
38oz
34oz
Gap Height
.24’’,5.99mm
.24’’,5.99mm
.32’’,8.00mm
.24’’,5.99mm
.32’’,8.00mm
.32’’,8.00mm
Voice Coil Diameter
1.0’’,25.4mm
1.0’’,25.4mm
1.5’’,38.1mm
1.0’’,25.4mm
1.75’’,44.5mm
1.75’’,44.5mm
Resonant Frequency (fs)
101Hz
147Hz
109Hz
104Hz
87Hz
98Hz
DC Resistance (Re)
6.1
6.1
6.7
5.9
6.4
5.8
Coil Inductance (Le)
.42mH
.39mH
.65mH
.28mH
.66mH
.63mH
Mechanical Q (Qms)
9.87
12.52
8.26
13.89
16.06
13.81
Electromagnetic Q (Qes)
1.49
2.18
.71
2.50
.67
.89
Total Q (Qts)
1.30
1.86
.65
2.12
.64
.83
Compliance Equivalent Volume (Vas)
17.49 ltr./.62cu.ft.
13.31 ltr./.47cu.ft.
21.16 ltr./.75cu.ft.
35.76 ltr./1.26cu.ft.
47.8 ltr./1.69cu.ft.
31.88 ltr./1.13cu.ft.
Peak Diaphragm Displacement Volume (Vd)
14.00cc
23.60cc
28.30cc
44.70cc
42.60cc
40.90cc
Mechanical Compliance of Suspension (Cms)
.26mm/N
.07mm/N
.11mm/N
.08mm/N
.11mm/N
.09mm/N
BL Product (BL)
4.9 T-M
6.6 T-M
11.2 T-M
6.5 T-M
12.6 T-M
11.2 T-M
Diaphragm Mass Inc. Airload (Mms)
9.4 grams
16.9 grams
19.4 grams
27.7 grams
30.5 grams
31.1 grams
Efficiency Bandwidth Product (EBP)
68
67
154
42
130
110
Maximum Linear Excursion (Xmax)
.6mm
.6mm
.8mm
.8mm
.8mm
.8mm
Surface Area of Cone (Sd)
218.2cm2
371.5cm2
371.5cm2
552.0cm2
558.6cm2
519.5cm2
Maximum Mechanical Limit (Xlim)
N/A
N/A
N/A
3.2mm
N/A
N/A
Sealed
N/A
N/A
N/A
N/A
N/A
N/A
Vented
N/A
N/A
N/A
N/A
N/A
N/A
Overall Diameter
8.24’’, 209.30mm
10.11’’, 256.79mm
10.11’’, 256.79mm
12.25’’, 311.15mm
12.25’’, 311.15mm
12.25’’, 311.15mm
Baffle Hole Diameter
7.10’’, 180.34mm
9.13’’, 231.90mm
9.13’’, 231.90mm
11.01’’, 279.65mm
11.00’’, 279.40mm
11.00’’, 279.40mm
Front Sealing Gasket
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
Rear Sealing Gasket
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
fitted as standard
Mounting Holes Diameter
.22’’, 5.59mm
.23’’, 5.84mm
.23’’, 5.84mm
.25’’, 6.35mm
.25’’, 6.35mm
.25’’, 6.35mm
Mounting Holes B.C.D.
7.79’’, 197.87mm
9.69’’, 246.13mm
9.69’’, 246.13mm
11.72’’, 297.69mm
11.72’’, 297.69mm
11.72’’, 297.69mm
Depth
2.90’’, 73.66mm
3.85’’, 97.79mm
4.13’’, 104.90mm
4.41’’, 112.01mm
5.10’’, 129.54mm
5.00’’, 127.00mm
Net Weight
2.50 lbs, 1.13 kg
3.10 lbs, 1.41 kg
6.70 lbs, 3.04 kg
3.80 lbs, 1.72 kg
7.80 lbs, 3.54 kg
7.50 lbs, 3.40 kg
Coil Construction
Copper
Copper
Copper
Copper
Copper
Copper
Coil Former
Polyimide
Polyimide
Polyimide
Polyimide
Nomex
Polyimide
Magnet Composition
Ferrite
Ferrite
Ferrite
Ferrite
Ferrite
Ferrite
Motor Details
Extended Core
Standard Core
Extended Core
Standard Core
Standard Core
Standard Core
Basket Materials
Steel
Steel
Steel
Steel
Steel
Steel
Cone Composition
Full Molded Paper
Full Molded Paper
Full Molded Paper
Full Molded Paper
Full Molded Paper
Full Molded Paper
Cone Edge Composition
Paper
Paper
Paper
Paper
Paper
Paper
Dust Cap Composition
Zurette
Zurette
Zurette
Zurette
Zurette
Zurette
MOUNTING INFORMATION Recommended Enclosure Volume
MATERIALS OF CONSTRUCTION
12
* PLEASE SEE FOOTNOTES ON PAGE 3 FOR INFORMATION REGARDING NOMINAL IMPEDANCE, POWER RATING AND SENSITIVITY. | ©EMINENCE SPEAKER, LLC
PROUDLY ENGINEERED IN THE USA
WWW.EMINENCE.COM
* PLEASE SEE FOOTNOTES ON PAGE 3 FOR INFORMATION REGARDING NOMINAL IMPEDANCE, POWER RATING AND SENSITIVITY. | ©EMINENCE SPEAKER, LLC
13
BASS GUITAR SPEAKERS
EBG-S2010
EBG-S2010HO-16
EBG-S2015
EBG-S2515
SPECIFICATION
EBG-S2010
EBG-S2010HO-16
EBG-S2015
EBG-S2515
Nominal Basket Diameter
10’’, 254mm
10”, 254mm
15’’, 381mm
15”, 381mm
Nominal Impedance*
8 or 16 ohms
16 ohms
8 ohms
8 ohms
Power Rating** Watts
200W
200W
200W
250W
Resonance
50Hz
50Hz
35Hz
50Hz
Usable Frequency Range
46Hz-3.5kHz
60Hz-4.3kHz
43Hz-4.0kHz
57Hz-5.5kHz
Sensitivity***
93.2
95
97
100
Magnet Weight
34oz
34oz
38oz
56oz
Gap Height
.32’’,8.00mm
.32”,8.00mm
.31’’,7.95mm
.39”,10.01mm
Voice Coil Diameter
2.0’’,50.8mm
2.0”,50.8mm
2.0’’,50.8mm
2.5”,63.5mm
Resonant Frequency (fs)
50Hz
50Hz
35Hz
50Hz
DC Resistance (Re)
5.9
11.3
6.0
5.7
Coil Inductance (Le)
.92mH
1.36mH
.89mH
.57
Mechanical Q (Qms)
5.53
7.59
6.38
7.65
Electromagnetic Q (Qes)
.55
.40
.63
.73
Total Q (Qts)
.50
.38
.57
.67
Compliance Equivalent Volume (Vas)
60.75 ltr./2.15cu.ft.
73.65 ltr./2.60cu.ft.
331.75 ltr./11.71cu.ft.
167.20 ltr./5.90 cu.ft.
Peak Diaphragm Displacement Volume (Vd)
140.70cc
138.61cc
342.40cc
121.00cc
Mechanical Compliance of Suspension (Cms)
.35mm/N
.42mm/N
.32mm/N
.16mm/N
BL Product (BL)
10.0 T-M
14.6 T-M
11.6 T-M
12.5 T-M
Diaphragm Mass Inc. Airload (Mms)
29.8 grams
24.5 grams
64.0 grams
63.1 grams
Efficiency Bandwidth Product (EBP)
90
123
56
69
Maximum Linear Excursion (Xmax)
4.0mm
3.9mm
4.0mm
1.4mm
Surface Area of Cone (Sd)
355.4cm2
3555.4cm2
864.6cm2
864.6cm2
Maximum Mechanical Limit (Xlim)
8.0mm
8.0mm
10.0mm
8.0mm
Sealed
14-28 liters / .5-1.0 cu.ft.
14-28 liters / .5-1.0 cu.ft.
40-142 liters / 1.4-5.0 cu.ft.
42-85 liters / 1.5-3.0 cu.ft.
Vented
27-68 liters / 1.0-2.4 cu.ft.
17-51 liters / .6-1.8 cu.ft.
96-195 liters / 3.4-6.9 cu.ft.
48-122 liters / 1.7-4.3 cu.ft.
Overall Diameter
10.11’’, 256.79mm
10.11”, 256.79mm
15.15’’, 384.81mm
15.15”,384.81mm
Baffle Hole Diameter
9.13”,231.90mm
9.13”, 231.90mm
13.84’’, 351.54mm
13.84’’, 351.54mm
Front Sealing Gasket
fitted as standard
fitted as standard
fitted as standard
fitted as starndard
Rear Sealing Gasket
fitted as standard
fitted as standard
fitted as standard
fitted as standard
Mounting Holes Diameter
.23’’, 5.84mm
.23”,5.72mm
.25’’, 6.35mm
.25’’, 6.35mm
Mounting Holes B.C.D.
9.69’’, 246.13mm
9.69”, 246.13mm
14.56’’, 369.82mm
14.56’’, 369.82mm
Depth
4.00’’, 101.60mm
4.12”, 104.78mm
6.00’’, 152.40mm
6.63”,168.40mm
Net Weight
6.90 lbs, 3.13 kg
6.80 lbs, 3.08 kg
8.90 lbs, 4.04 kg
12.30 lbs, 5.58 kg
Coil Construction
Copper
Copper
Copper
Aluminum
Coil Former
Polyimide
Polyimide
Polyimide
Polyimide
Magnet Composition
Ferrite
Ferrite magnet
Ferrite
Ferrite
Motor Details
Vented w/ Extended Core Bumped
Extended Core
Vented w/ Extended Core Bumped
Vented Core
THIELE & SMALL PARAMETERS
MOUNTING INFORMATION Recommended Enclosure Volume
MATERIALS OF CONSTRUCTION
BackPlate
BackPlate
Basket Materials
Steel
Steel
Steel basket
Steel
Cone Composition
Treated Paper
Treated Paper
Treated Paper
Treated Paper
Cone Edge Composition
Sealed Cloth
Sealed Cloth
Sealed Cloth
Sealed Cloth
Dust Cap Composition
Treated Paper
Zurette
Treated Paper
Treated Paper
14
* PLEASE SEE FOOTNOTES ON PAGE 3 FOR INFORMATION REGARDING NOMINAL IMPEDANCE, POWER RATING AND SENSITIVITY. | ©EMINENCE SPEAKER, LLC
PROUDLY ENGINEERED IN THE USA
WWW.EMINENCE.COM
* PLEASE SEE FOOTNOTES ON PAGE 3 FOR INFORMATION REGARDING NOMINAL IMPEDANCE, POWER RATING AND SENSITIVITY. | ©EMINENCE SPEAKER, LLC
15
GUITAR AMPLIFIERS As the world’s number one custom loudspeaker manufacturer, Eminence has gained tremendous insight in the development of professional audio enclosures, and guitar and bass amplifiers. We’ve spent the past 40 years collaborating with the best designers and best
or simply from your concept, through the design and documentation process,
brands in the development of some of the music industry’s most well respected
production, certification, and on to market.
TDC-15
TDC-60
TDC-120
TDC-412 & TDC-412SL (MODEL NOT SHOWN)
products. Our engineers understand the complete product development process and combine to represent a wealth of knowledge in sound reproduction and
On the following pages, you will find stock professional audio and guitar
guitar tone.
amplifier products that can quickly and easily be customized to meet the needs of your specific brand. It’s never been easier for you to bring a line of
Today, most name brands sub-contract the design and manufacturing of their
professional audio or guitar and bass amplifiers to market under your brand.
products. However, many OEM and ODM suppliers lead to concerns with communication, intellectual property, quality, delivery, and service after the sale. Eminence has expanded to meet those concerns head on through the Eminence Cabinet Shop. Today, Eminence can take your product, be it from your designs
SPECIFICATION
TDC 15
TDC 60
TDC 120
TDC 412
TDC 412SL
Description
15 Watt, OEM, Solid State Guitar Amplifier Combo
60 Watt, OEM, Solid State Guitar Amplifier Combo
120 Watt, OEM, Solid State Guitar Amplifier Combo
300-400 Watt, OEM, Straight Guitar Cabinet
300-400 Watt, OEM, Slant Guitar Cabinet
Power
15 Watts
60 Watts
120 Watts
300-400 Watts
300-400 Watts
Speaker
1 X 10” Custom Eminence
1 X 12” Custom Eminence
2 X 12” Custom Eminence
4 X 12” Custom Eminence
4 X 12” Custom Eminence
Channels
1 Clean Channel + 1 High Gain Overdrive /
1 Clean Channel + 1 High Gain Overdrive / Distortion Layer +
1 Clean Channel + 1 High Gain Overdrive / Distortion Layer +
Distortion Layer
1 Mega Drive Layer
1 Mega Drive Layer
Reverb
Spring
Spring
Spring
EQ
3 Band
3 Band
3 Band
MP3 / CD Input
1/8” Yes
1/8” Yes
1/8” Yes
Headphone Out
1/8” Yes
1/8” Yes
1/8” Yes
Straight
Slant
Configuration
Top or Front Mount Chassis
Top or Front Mount Chassis
Top or Front Mount Chassis
Your choice of British or American Cone Speakers
Your choice of British or American Cone Speakers
Performance Details
Equivalent to 2 channel Guitar Amplifier
Equivalent to 4 Channel Guitar Amplifier
Equivalent to 4 Channel Guitar Amplifier
Net Weight
18.9 lbs
37 lbs
50 lbs
16
* PLEASE SEE FOOTNOTES ON PAGE 3 FOR INFORMATION REGARDING NOMINAL IMPEDANCE, POWER RATING AND SENSITIVITY. | ©EMINENCE SPEAKER, LLC
PROUDLY ENGINEERED IN THE USA
WWW.EMINENCE.COM
* PLEASE SEE FOOTNOTES ON PAGE 3 FOR INFORMATION REGARDING NOMINAL IMPEDANCE, POWER RATING AND SENSITIVITY. | ©EMINENCE SPEAKER, LLC
17
PRO AUDIO ENCLOSURES
PA-112
PA-115
PA-118S
PA-215
PA-218S
SPECIFICATION
PA-112
PA-115
PA-118S
PA-215
PA-218S
Description
2 Way PA box / Floor Wedge
2 Way PA box / Floor Wedge
Subwoofer for PA use
Quasi-Three Way PA box
Subwoofer for PA use
System Type
12” Two-way bass reflex stage monitor/PA top box
15” Two-way bass reflex stage monitor/PA top box
1x18” PA Passive Subwoofer
2x15 PA Full Range Box
2x18” PA Passive Subwoofer,Bass Reflex Cabinet
Power Handling
150/300W
300/600W
600/1200W
600/1200W
1200/2400W
Frequency Range +/- 10dB
42.4Hz - 23kHz
49Hz - 23kHz
33.5Hz
46Hz - 23kHz
33.5Hz
Frequency Response +/- 3dB
61Hz - 20kHz
69Hz - 20kHz
47Hz
64Hz - 20kHz
47Hz
Coverage Pattern
90 x 40
90 x 40
N/A
90 x 40
N/A
Sensitivity 1W/1M
95dB
99 dB
97dB
101dB
100dB
Maximum SPL
121dB
126 dB
127dB
130dB
133dB
Impendance
8 ohm
8 ohm
8 ohm
4 ohm
4 ohm
Construction Details
MDF Baffles, Optional Partical Board, MDF, or
MDF Baffles, Optional Partical Board, MDF, or
MDF Baffles, Optional Partical Board, MDF, or
MDF Baffles, Optional Partical Board, MDF, or
MDF Baffles, Optional Partical Board, MDF, or
Plywood Shells
Plywood Shells
Plywood Shells
Plywood Shells
Plywood Shells
Grille
Perforated Steel
Perforated Steel
Perforated Steel
Perforated Steel
Perforated Steel
LF Units
12”, 2” VC (EPA-S2012)
15”, 2.5” VC (EPA-S2515)
18” Cast Frame Driver with 3” VC (EPA-C3018LF)
15” 2.5” VC x 2 (EPA-S2515)
18” Cast Frame Driver with 3” VC (EPA-C3018LF)
HF Units
1” Exit Ti Dome with 1.3” VC
1” Exit TI Dome with 1.3” VC
N/A
1” Exit Ti Dome with 1.3” VC
N/A
Horn
90x40 ABS Screw On
90x40 ABS Screw On
N/A
90x40 ABS Screw On
N/A
Crossover
Two-way with tweeter protection
Two-way with tweeter protection
No
Quasi-three way design with tweeter protection
No
Bi-ampable
No
No
Passive System, needs external crossover
No
Passive System, needs external crossover
Mounting
Variable-angle pole mount
Variable-angle pole mount
Pole mount on top
N/A
Optional
Dimensions
17.32 X 24.5 X 13.5
17.63 X 26.57 X 16
23.9 X 23.9 X 23.9
17.63 X 41.58 X 16.125
47.6 X 23.7 X 23.9
Enclosure Volume
1.75 cu. ft.
2.4 cu. ft.
5.6 cu. ft.
4.14 cu. ft.
11.7 cu. ft.
Input Connectors
Two 1/4” and One NL-4 Speak-on
Two 1/4” and One NL-4 Speak-on
Two 1/4” and NL-4 Speak-on
Two 1/4” and One NL-4 Speak-on
Two 1/4” and NL-4 Speak-on
Net Weight
46.5 lbs (3/4” Particle Board Version)
55.5 lbs (3/4” Particle Board Version)
92 lbs (3/4” MDF version)
92 lbs (3/4” Particle Board version)
166 lbs (3/4” MDF Version)
Comments
Multi-purpose floor wedge/PA top box
Multi-angled Cabinet for PA top box or laydown
Ports are symmetrically loaded around driver
floor wedge
18
* PLEASE SEE FOOTNOTES ON PAGE 3 FOR INFORMATION REGARDING NOMINAL IMPEDANCE, POWER RATING AND SENSITIVITY. | ©EMINENCE SPEAKER, LLC
Divider between the two drivers for isolation and rigidity
PROUDLY ENGINEERED IN THE USA
WWW.EMINENCE.COM
* PLEASE SEE FOOTNOTES ON PAGE 3 FOR INFORMATION REGARDING NOMINAL IMPEDANCE, POWER RATING AND SENSITIVITY. | ©EMINENCE SPEAKER, LLC
19
FOR SALES, ENGINEERING, AND DISTRIBUTION INQUIRIES: EMINENCE USA P.O. BOX 360 | 838 MULBERRY PIKE EMINENCE, KY 40019 PHONE: 502.845.5622 FAX: 502.845.5653 E-MAIL:
[email protected] WWW.EMINENCE.COM ALL OTHER INQUIRIES: EMINENCE DONGGUAN DI-YONG MANAGEMENT REGION DONG GUAN CITY, GUANG DONG PROVINCE, P.R.C. PHONE: 0769-8878 8787 / 8878 9990 FAX: 0769-8878 6636
