Transcript
EMPLOYEE OWNED MADE IN THE U.S.A. • SINCE 1894 Dexter OPL T-1200 Washer Specifications Dryer Dimensions / Capacity Dry Weight Capacity
Water SCVD60HMS-_ _
80 lb
Cabinet Height
58.0”
(36.3 kg) (147.3cm)
Water inlet Size
3/4”
(19 mm)
Flow Rate (per min)
12 gal
(45.4 L)
Pressure (min/max)
10-130 psi
(69-896 kPa)
Drain Diameter (O.D.)
3.0”
(7.6 cm)
9.0”
(22.9” cm)
Cabinet Width
34.39”
(87.4 cm)
Floor to Center of Drain
Overall Depth
45.38’’
(115.3 cm)
Electrical / Circuit Breaker / Running Amps / Wire Size
Door Opening
18.5”
(47.0 cm)
Cylinder Diameter
Cylinder Depth Cylinder Volume
Floor to Door Bottom Speeds G-Force (RPM)
30.0”
(76.2 cm)
-12 (208-240/60/1 - 2 wire + ground)
20 amp / 8.4 amp / #12
-12 (208-240/60/1 - 3 wire + ground)
20 amp / 8.4 amp / #12
-59 (230/50/1 - 2 wire + ground)
20 amp / 8.4 amp / 3.5 mm2
28”
(71.2 cm)
11.5 cu.ft.
(326.0 L)
Installation Recommendations
18.5”
(47.0 cm)
Clearance Between Machines
1/2” (min)
(1.3 cm)
Clearance Behind Machines
24” (min)
(61.0 cm)
Concrete Thickness
8” (min)
(20.3 cm)
High Speed Extract
100 G
(485 RPM)
Intermed. Extract Speed
60 G
(375 RPM)
Washing Speed
.9 G
(43 RPM)
1060 lbs
(480.8 kg)
1099 lbs
(498.5kg)
63”
(160.0 cm)
36”
(91.4 cm)
52.14”
(132.7 cm)
Approvals**
Net Weight - lb (kg) Shipping Dimensions: Shipping Weight Height - in (cm) Width - in (cm)
Depth - in (cm)
Front
Rev. 41 - 7/18/2013
Side
Back
** Agency approvals may vary depending on configuration. Consult factory for details. For the most accurate information, please consult machine installation guide for all design and construction purposes. Due to continuous product improvements, design and specifications subject to change.
Part #0995-109-028
DEXTER INDUSTRIAL T-1200 WASHER 6 CYCLE ON-PREMISE WASHER MODEL
Dexter On-Premise Washers Are Designed, Tested And Manufactured To Ensure Superior Performance DEXTER T-1200 OPL WASHER FEATURES: RELIABLE DESIGN: ● Heavy-Duty Bearings In a Cast Iron Bearing Housing ● Welded Steel Spider And Shaft ● AISI 304 Stainless Steel Top, Front And Side Panels ● Fits Through a Standard 36” Doorway ● 10 Year Washer Warranty On The Frame, Tub, Cylinder, Shaft, Seals, Bearings & Bearing Housing ● 3 Year Parts Warranty
PERFORMANCE FEATURES ● 100 G-Force Extraction ● 6 Programmable Wash Cycles Available ● Perforated Cylinders And Raised Baffles For Superior Wash Action ● Easy To Modify Cycle Times, Temperatures, Water Levels And Injection Source ● Energy Efficient Inverter Drive Technology ● Rugged Frame Design Proven For Over Two Decades ● All Dexter Washer Designs Pass 1000 Hour Out of Balance Test
OPTIONS: ● Capacities Available: 20lb, 30lb, 40lb, 60lb And 80lb
Ask your Dexter Authorized Distributor For More Details! www.dexter.com • 1- 800-524-2954
