Transcript
1. Verify the Contents Inside the Package Box
2. Installation Step 1: Connect telephone line to LINE port via splitter.
The package should contain the items plus ADN-4102. If any item is missing or damaged, please contact the seller immediately. Telephone Line PHONE
DSL
Telephone
Splitter
LINE
Phone Jack
Telephone Line
Step 2: Connect network device to LAN port. Quick Installation Guide
RJ45 Cable
RJ11 Cable
Telephone Line PHONE
Ethernet Cable
DSL
Telephone
Splitter
Splitter
Power Adapter LINE
PC (DHCP Client or Fixed 192.168.1.x)
Telephone Line
Phone Jack
–1–
–2–
Step 3: Connect the power and then press the button . Check whether the LEDs on the front panel are on accordingly.
Step 4: Locate the AP router in an optimum place for the best coverage. The default SSID is “ADN-4102”.
Press the button
Best angle of the antenna
N Ethernet Cable
Telephone Line
PHONE DSL
Power Adapter
Telephone
Laptop (DHCP Client or Fixed IP: 192.168.1.x)
Splitter
LINE Telephone Line
Phone Jack
PC (DHCP Client or Fixed 192.168.1.x)
–3–
N
–4–
Step 5: Open web browser and type the default IP address (http://192.168.1.1). User name: admin Password: admin
3. Further Configuration For detailed configuration, please check user’s manual which you can download from the website. http://www.planet.com.tw/en/support/download.php?type1= 320&model=48701&type=3 If you have any other question, please contact the dealer where you purchased this product or you can contact PLANET directly at the following email address: support_
[email protected]
–5–
– 6–
