Transcript
Encoder
Real Time H.264 Video Server / Encoder data delivered
Product Description The KBC Encoder is a high resolution, IP Ethernet (LAN/WAN) ready, digital video server/encoder. The unit encodes video and data from a new or existing analog camera to H.264 digital video for streaming over a wired or wireless network. Specifically designed to meet the increasing need for high quality, reliable, real-time video applications, the encoder is ideal for retrofit or new video surveillance applications. For ultimate flexibility, an encoder may be connected via a Wireless Ethernet System (or network of Mesh nodes) in camera locations where it is not feasible to run wire. For end-to-end analog connectivity, the Encoder should be used with a Decoder.
Product Features • • • • •
25/30 fps at full D1 resolution Selectable H.264, MPEG-4 SP, MJPEG compressions with dual streaming Video motion detection Digital input and digital output Serial ports for PTZ control
Typical System Configuration
WESII Client
Video Encoder WESII Host 5 GHz
Encoder
Power Injection Module
Specsheet-H264-Encoder-low-Rev1209 Copyright© KBC Networks Ltd. 2012
Decoder
Power Injection Module
Video Decoder
Specifications Image Compression
H.264, MPEG-4 SP, MJPEG
Image Frame Rate
Multi-streaming Bit Rate Bit Rate Mode Image Enhancement Privacy Mask Text Overlay Network Protocol & Service
30fps @ 720 x 480 (full D1, NTSC) 25fps @ 720 x 576 (full D1, PAL) 30fps @ 352 x 240 (CIF NTSC) 25fps @ 352 x 288 (CIF, PAL) 30fps @ 160 x 112 (QCIF, NTSC) 25fps @ 176 x 144 (QCIF PAL) Simultaneous dual streams based on 2 configurations 28kbps - 6Mbps (per stream) Constant, variable Brightness, saturation, contrast 4 configurable regions User defined text on video TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour 1, Ethernet (10/100 Base-T), RJ-45 connector IP address filtering; HTTPS encryption; Password protected user levels; IEEE 802.1X network access control
Ethernet Port Security
Alarm Alarm Trigger
Interface Analog Video Input Digital Input Digital Output Serial Port Mechanical Dimensions (W x H x D)(1) Weight Certification Power Power Requirements Power Supply
1, CVBS, 1.0Vp-p with 75Ω BNC connector 1, terminal block 1, terminal block RS-485, RS-422, RS-232, terminal block 103mm x 28.5mm x 76 mm (4.06" x 1.12" x 2.99") 195 g (0.43 lb) Video Encoder: CE, FCC; Adapter: CE, TUV-GS, UL, RCM, CCC 12 Vdc, 3.6W 12 Vdc ±10% wall transformer supplied
Environmental Humidity Operating Temperature
10% ~ 85% RH -30°C ~ +70°C (-22°F ~ +158°F)
Approvals Encoder Adapter
CE, FCC, CE, TUV-GS,UL RCM, CCC
Integration ISV Integration Firmware Access Browser
Software Development Kit (SDK) available Microsoft Internet Explorer 6.0 or above
Video motion detection (3 regions); External device through digital input Notify control center; Go to PTZ preset point or preset tour; Change camera settings; Command other devices; E-mail notification with snapshots; Upload video, snapshot to FTP server; Activate external device through digital output
Alarm Response
Part Number Configurator
ENC-H-WA A: US Power Plug B: UK Power Plug C: Euro Power Plug E: Australian Power Plug
Encoder & Kit Contents ENC-H-W* EDKT-H-W*
Includes video server/encoder and power supply Includes video server/encoder, decoder, environmental enclosure & mounting hardware, 1 x set of connectors for alarm for I/O and data interface, 2 x power supplies
1. Product body dimensions. Please contact KBC Networks for product drawing and dimensions of mount.
Due to ongoing technological improvements, product specifications are subject to change without notice. KBC is not liable for any errors, omissions or changes of anydescription of the goods contained herein. This information is for the sole purpose of identifying the products, and KBC makes no warranty that the products conform tany description contained herein. Do not rely solely on any representations, statements, or assertions concerning these Producs contained herein.
www.kbcnetworks.com
