Transcript
END OF FINANCIAL YEAR SALE APRIL - JUNE 2012
THE BENEFITS OF BRUSHLESS: • EXTRA POWER • EXTENDED RUN TIME • COMPACT & LIGHTWEIGHT • ELECTRONIC CONTROL
Limited Edition 2 Piece Brushless Pack Includes: DV18DBL Impact (Hammer) Driver Drill, WH18DBDL Impact Driver, 2 x 3.0Ah Li-ion Slide Batteries With MPC, UC18YRSL Cooling Charger And Carry Case
699
$
Power Pack 5
Limited Edition 2 Piece Brushless Pack Includes: DV18DBL Impact (Hammer) Driver Drill, WR18DBDL Impact Wrench, 2 x 3.0Ah Li-ion Slide Batteries With MPC, UC18YRSL Cooling Charger And Carry Case
699
$
Also available:
Also available:
Power Pack 7
Power Pack 8
2 Piece Brushless Pack includes: DS18DBL Driver Drill, WH18DBDL Impact Driver, 2 x 3.0Ah Li-ion Slide Batteries with MPC, UC18YRSL Cooling Charger and Carry Case $659
2 Piece Brushless Pack includes: DS18DBL Driver Drill, WR18DBDL Impact Wrench, 2 x 3.0Ah Li-ion Slide Batteries with MPC, UC18YRSL Cooling Charger and Carry Case $659
Products Marked With This Symbol Are Eligible For A Bonus Battery! Visit www.hitachibonusbattery.com.au to Redeem Online! BATTERY REDEMPTION OFFER IS EXTENDED TILL 30/06/2012 Full Terms and Conditions Apply, see website for details. Eligible products are limited to 18V 3.0Ah Tool Sets (which must include a tool, 2 batteries and a charger only), nominated Kits and Packs and all Limited Edition Power Packs. Valid for purchases between 15.01.12 - 30.06.12
Power Pack 6
18V Slide Li-ion Range Hitachi’s brushless motors are designed to make maximum use of battery energy. They work up to 30% longer per charge than conventional models. It’s due to no energy loss through friction resistance, heat or sparking. This also provides a significant increase in power, providing a greater capacity to handle bigger workloads.
18V Slide Impact (Hammer) Driver Drill DV18DBL
18V Slide Impact Wrench
WR18DBDL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
• 30% More Efficient Hitachi Brushless Motor • 4 Stage Speed Selector And Electronic Switch 50% Less Trigger Force Required • 2 Speed Gearbox With All Metal Gears
• 250Nm Tightening Torque • 30% More Efficient Hitachi Brushless Motor • 4 Stage Speed Selector And Electronic Switch Plus Two Mode Impact Rate: Single Or Continuous
589
$
619
$
The brushless motors are also smaller in size making the tools more compact and lightweight. Scan this QR code to see a demonstration of Carbon Brush vs Brushless Hitachi tools
Also available: ‘Naked’ DV18DBL(H4) $279
18V Slide Driver Drill
Once they’re fully charged, they’re ready to work longer.
DS18DBL
Also available: ‘Naked’ WR18DBDL(H4) $229
18V Slide Impact Driver
WH18DBDL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
• 30% More Efficient Hitachi Brushless Motor • 4 Stage Speed Selector And Electronic Switch - 50% Less Trigger Force Required • 2 Speed Gearbox With All Metal Gears
• 165Nm Tightening Torque • 30% More Efficient Hitachi Brushless Motor • 4 Stage Speed Selector And Electronic Switch Plus Two Mode Impact Rate: Single Or Continuous
589
$
599
$
Also available: ‘Naked’ WH18DBDL(H4) $229 Also available: ‘Naked’ DS18DBL(H4) $269
Keep an eye out for this symbol to redeem your bonus battery!
Simply purchase any eligible Hitachi 18V 3.0Ah Tool Set, nominated Kits and Packs and all Limited Edition Power Packs between 15.01.12 and 30.06.12 from an authorised Hitachi Dealer and redeem a BONUS 18V 3.0Ah battery online! www.hitachibonusbattery.com.au
18V Slide Electronic Pulse Driver
WM18DBL
18V Slide Impact Driver
WH18DSL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
• Industry First Low Noise Electronic Pulse System • 33Nm Tightening Torque • 30% More Efficient Hitachi Brushless Motor • 5 Operation Modes - Easily Select The Right Function For The Right Job
• 145Nm Tightening Torque • Two Power Mode: Save Mode For Small Bit or Power Mode for Larger Bit • Steel Belt Hook
NEW
999
$
Also available: ‘Naked’ WM18DBL(H4) $679
549
$
Also available: ‘Naked’ WH18DSL(H4) $199
18V Slide Li-ion Range 18V Slide Impact (Hammer) Driver DrillDV18DSFL
18V Slide Compact Drills
DS/DV18DSL
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
• 13mm Keyless Chuck • Steel Belt Hook • 2 Speed Gearbox With All Metal Gears
• 13mm Single Sleeve Metal Keyless Chuck With Automatic Spindle Lock • 2 Speed Gearbox With All Metal Gears • 45Nm Hard Torque
• Blade Can Be Loaded In Upward Or Downward Direction • Tool-less Blade Change • External Access To Carbon Brushes
469
$
294
$
18V Slide Reciprocating Saw
CR18DSL
599
$
DS18DSL Driver Drill
499
$
DV18DSL Impact (Hammer) Driver Drill
Also available: ‘Naked’ DV18DSFL(H4) $149
18V Slide Impact Driver
WH18DSAL
Also available: - 'Naked' DV18DSL(H4) $259 - 'Naked' DS18DSL(H4) $249
Also available: ‘Naked’ CR18DSL(H4) $259
18V Slide High Torque Impact Wrench
WR18DHSL
18V Slide Circular Saw
C18DSL
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
• 145Nm Tightening Torque • Lightweight At 1.5kg • Steel Belt Hook
• 480Nm Tightening Torque • Forward & Reverse Rocker Switch • Bright LED light
• 165mm Blade With Cutting Capacity Up To 57mm • Electric Brake And Magnesium Blade Cover • Base Plate Fine Angle Adjustment
599
$
369
$
799
$
Available Late May NEW
Also available: ‘Naked’ WH18DSAL(H4) $159
Also available: ‘Naked’ WR18DHSL(H4) $439
Also available: ‘Naked’ C18DSL(H4) $259
18V Slide Rotary Hammer Drill DH18DSL
18V Slide 115mm Angle Grinder G18DSL
18V Slide Jigsaw
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
• SDS Plus Chuck With 16mm Max Drilling Capacity • Two Mode Action: Hammer Drilling For SDS Plus Drill Bits And Non Hammer Drilling For Adaptor Chuck With HSS Drill Bits
• Compact, Slim, Soft Grip Body And Lightweight At 1.8kg • Safety Overload Circuit And Anti-Start Safety Override When Replacing Batteries
• Three Mode Orbital Action Or Straight Cut • Tool-less Blade Change • Integrated Dust Blower
599
$
Also available: ‘Naked’ DH18DSL(H4) $259
539
$
Also available: ‘Naked’ G18DSL(H4) $159
CJ18DSL
599
$
Also available: ‘Naked’ CJ18DSL(H4) $259
18V Cassette Li-ion Range 18V Cassette 115mm Angle Grinder G18DL
18V Cassette Reciprocating Saw CR18DL
AM/FM Radio (Slide & Cassette) UR18DSL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes AC Adaptor
• Compact, Slim, Soft Grip Body And Lightweight At 1.9kg • Safety Overload Circuit And Anti-Start Safety Override When Replacing Batteries
• Blade Can Be Loaded In Upward Or Downward Direction • Tool-less Blade Change • External Access To Carbon Brushes
• Compatible With All Hitachi 9.6V - 18V Slide & Cassette Batteries (Excluding 10.8/12V Peak) • Compatible With iPod, MP3 And CD Players
539
$
169
$
599
$
Also available: ‘Naked’ G18DL(H4) $159
Keep an eye out for this symbol to redeem your bonus battery!
Also available: ‘Naked’ CR18DL(H4) $259
* Only Available Naked
18V Cassette Circular Saw
18V Cassette High Torque Impact Wrench WR18DHL
C18DL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case • 165mm Blade With Cutting Capacity Up To 57mm • Electric Brake And Magnesium Blade Cover • Base Plate Fine Angle Adjustment
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case • 480Nm Tightening Torque • Forward & Reverse Rocker Switch • Bright LED light
599
$
799
$ Simply purchase any eligible Hitachi 18V 3.0Ah Tool Set, nominated Kits and Packs and all Limited Edition Power Packs between 15.01.12 and 30.06.12 from an authorised Hitachi Dealer and redeem a BONUS 18V 3.0Ah battery online! www.hitachibonusbattery.com.au
NEW
Also available: ‘Naked’ C18DL(H4) $259
Also available: ‘Naked’ WR18DHL(H4) $439
18V Cassette Jigsaw
18V Cassette Impact Wrench
CJ18DL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case • Three Mode Orbital Action Or Straight Cut • Tool-less Blade Change • Integrated Dust Blower $
599
Get more battery life with the flick of a switch.
WR18DL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case • 150Nm Tightening Torque • Two Power Mode: Save Mode For Small Bit or Power Mode for Larger Bit • Belt Hook With LED Light
549
$
Also available: ‘Naked’ CJ18DL(H4) $259
Also available: ‘Naked’ WR18DL(H4) $199
18V Cassette Li-ion Range 18V Cassette Rotary Hammer Drill
DH18DL
18V Cassette Impact (Hammer) Driver Drill DV18DFL
18V Cassette Impact (Hammer) Driver Drill DV18DL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
• SDS Plus Chuck With 16mm Max Drilling Capacity • Two Mode Action: Hammer Drilling For SDS Plus Drill Bits And Non Hammer Drilling For Adaptor Chuck With HSS Drill Bits
• 13mm Keyless Chuck • Lightweight At 1.6kg • 2 Speed Gearbox With All Metal Gears
• Two Power Mode: Save Mode For Small Bit or Power Mode for Larger Bit • 13mm Single Sleeve Metal Keyless Chuck With Automatic Spindle Lock • 2 Speed Gearbox With All Metal Gears
599
$
294
$
579
$
Also available: ‘Naked’ DH18DL(H4) $259
Also available: ‘Naked’ DV18DFL(H4) $149
18V Cassette Driver Drill
18V Cassette Driver Drill
DS18DFL
DS18DL
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
• 13mm Single Sleeve Keyless Chuck • Lightweight At 1.7kg • 2 Speed Gearbox With All Metal Gears
• Two Power Mode: Save Mode For Small Bit or Power Mode For Larger Bit • 13mm Single Sleeve Metal Keyless Chuck With Automatic Spindle Lock • 2 Speed Gearbox With All Metal Gears
559
$
279
$
Also available: ‘Naked’ DS18DFL(H4) $139
18V Cassette Impact Driver
Also available: ‘Naked’ DV18DL(H4) $259
WH18DFL
Also available: ‘Naked’ DS18DL(H4) $249
18V Cassette Impact Driver
WH18DL
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
• 130Nm Tightening Torque • Lightweight At 1.5kg • Belt Hook With LED Light
• 150Nm Tightening Torque • Two Power Mode: Save Mode For Small Bit or Power Mode for Larger Bit • Belt Hook With LED Light
369
$
Also available: ‘Naked’ WH18DFL(H4) $159
549
$
Also available: ‘Naked’ WH18DL(H4) $199
Simply purchase any eligible Hitachi 18V 3.0Ah Tool Sets, nominated Kits and Packs and all Limited Edition Power Packs from an authorised Hitachi Dealer and redeem a bonus 18V 3.0Ah Battery! Products Marked With This Symbol Are Eligible For A Bonus Battery! Visit www.hitachibonusbattery.com.au to Redeem Online!
18V OPE Slide & cassette Hitachi Li-ion batteries have a multiple protection circuit fitted that monitors every cell in the battery. This protects the battery and tool by providing overload protection which stops the tool instantly in the event of a jam or overload. It gives over charge and over discharge protection which ensures the battery life is extended. Plus, the multiple protection circuit provides over heating protection that will shut the tool down to avoid excess heat.
18v Slide Grass Trimmer
CG18DSDL
Lighter, Quieter, Smarter
Includes 1 x 3.0Ah Li-ion Battery with MPC and Charger
Introducing the new Hitachi 18V grass trimmer - featuring Hitachi's unique disc motor.
• Hitachi's Unique Efficient Disc Motor • 38V Boost Circuit Increases Power Under Load • 28 Minute Run Time On a Single Charge*
The unique disc motor is located on top of the trimming head. As it rotates the trimming head directly there is no need for a drive shaft which results in:
499
$
• Low Noise • Low Vibrations • Low Weight • Higher Efficiency
NEW Also available: ‘Naked’ CG18DSDL(H4) $349 *Approximates Only
18V Slide Hedge Trimmer
Every cell in every battery has multiple protection.
CH18DSL
18V Cassette Hedge Trimmer
CH18DL
Includes 1 x 1.5Ah Li-ion Battery with MPC and Charger
Includes 1 x 1.5Ah Li-ion Battery with MPC and Charger
• 520mm Bar With Dual Action Cutting Teeth • 15mm Cutting Capacity • 50 Minute Run Time On a Single Charge*
• 520mm Bar With Dual Action Cutting Teeth • 15mm Cutting Capacity • 50 Minute Run Time On a Single Charge*
279
$
279
$
NEW
NEW Also available: ‘Naked’ CH18DSL(H4) $149
Also available: ‘Naked’ CH18DL(H4) $149
*Approximates Only
*Approximates Only
Pneumatics Framing Nailer
Cassette
Multiple Protection Circuit
Heat Sensor
NR90AD
• Fires 50 - 90mm 34° Framing Nails • Sequential & Bump Fire Trigger • Tool-less Depth Dial • Industrial Strength Top Housing
DA Finish Nailer
NT65MA4
• Fires 32-65mm DA Series Finish Nails • Sequential & Bump Fire Trigger • Integrated Air Duster • Tool-less Depth Dial
539
$
399
$
18V PACKS slide & cassette Limited Edition
Hitachi’s brushless motors are designed to make maximum use of battery energy.
Power Pack 1
2 Piece Pack Includes: DV18DL Impact (Hammer) Driver Drill, WH18DL Impact Driver, 2 x 3.0Ah Li-ion Cassette Batteries With MPC, UC18YRL Cooling Charger And Carry Case
They work up to 30% longer per charge than conventional models. It’s due to no energy loss through friction resistance, heat or sparking. This also provides a significant increase in power, providing a greater capacity to handle bigger workloads.
649
$
Also available: Power Pack 2
2 Piece Pack Includes: DV18DL Impact (Hammer) Driver Drill, WR18DL Impact Wrench, 2 x 3.0Ah Li-ion Cassette Batteries With MPC, UC18YRL Cooling Charger And Carry Case $649
The brushless motors are also smaller in size making the tools more compact and lightweight. Scan this QR code to see a demonstration of Carbon Brush vs Brushless Hitachi tools
Limited Edition
Power Pack 4
2 Piece Pack Includes: DV18DSL Impact (Hammer) Driver Drill, WH18DSL Impact Driver, 2 x 3.0Ah Li-ion Slide Batteries With MPC, UC18YRSL Cooling Charger And Carry Case
539
$
Pneumatics C Series Finish Nailer
NT65M2
• Fires 25 - 65mm C Series Finish Nails • Sequential & Bump Fire Trigger • Integrated Air Duster • Tool-less Depth Dial
C1 Series Finish Nailer
NT50AE2
• Fires 15 - 50mm C1 Series Finish Nails • Sequential & Bump Fire Trigger • Tool-less Depth Dial
299
N3804AB3
• Fires 13 - 38mm 6000 Series Narrow Crown Staples • Sequential & Bump Fire Trigger • Tool-less Depth Dial
Also available: 15 - 32mm C1 Series Nailer NT32AE2 $169
$
Narrow Crown Stapler
219
$
179
$
Drilling Hitachi’s Slide Compound Mitre Range encompasses the following features within its range: • Linear ball bearing slide system for superior accuracy and control. • Positive stops on mitre and bevel scale, for easy to read measurements and quick settings. • High sub fences to support work piece for improved stability while cutting. • Splinter guard to prevent material from splintering increasing user safety. • High levels of dust collection to keep jobsite clean. • Quick Change Depth Adjustment Guide • Laser Marker, Digital Readout and LED Light (not featured on all tools).
13mm Impact Drill • 550W Motor • 13mm Keyless Chuck • Reversible With Variable Speed
Also available: 16mm Impact Drill DV16VSS $119
109
$
130mm Reciprocating Saw
Hitachi’s dual slide system provides
DV13VSS
20mm Impact Drill
DV20VB2
• 730W Motor • 2 Speed Gearbox • Variable Speed With Reverse • 13mm Keyed Chuck
299
$
CR13VBY
• 1150W Motor • Tool-less Blade Change With 2 Mode Cutting Action • Lightweight 4.4Kg
accurate & increased
Drill With Safety Clutch
D13VB3
• 790W Motor • 2 Speed Gearbox • 13mm Keyless Chuck • 40mm Wood Capacity • Variable Speed With Reverse
cutting capacity whilst providing added safety and portability
399
$
469
$
bonus 1 x Site Bag
12mm Variable Speed Router • 1700W Motor • 3 Way Adjustable Handle • Lightweight 5.3Kg Also available: M12SE $339
M12VE
6.35mm Trimmer
M6SB
• 400W Motor • Fine Rack & Pinion Height Adjustment With 45º Adjustable Base • Lightweight 1.4Kg
449
$
339
$
Wood Work 305mm Slide Compound Saw with Laser C12RSH
216mm Slide Compound Saw
• 1520W Motor • 107 x 312mm Cutting Capacity With Zero Clearance Slide Structure
• 1050W Motor • 75 x 262mm Cutting Capacity With Positive Mitre Stops
• 1520W Motor • 89 x 101mm Cutting Capacity With Positive Mitre Stops
Also available: 305mm Slide Compound Saw with Laser Marker and Digital Readout C12LSH $1149
Also available: 216mm Slide Compound Saw with Laser Marker & LED Light C8FSHE $899
Also available: 255mm Compound Mitre Saw with Laser Marker C10FCH2 $439
999
$
C8FSE
849
255mm Compound Mitre Saw C10FCE2
399
$
$
125mm Random Orbital Sander SV13YB
110mm D-Handle Jigsaw
CJ110MV
• 230W Motor • Lightweight At 1.4kg • High Dust Collection
• 720W Motor, Variable Speed at 1.5kg • Three Mode Orbital Action Or Straight Cut And Tool-less Blade Change By Lever
Also available: 125mm Variable Speed Orbital Sander SV13YA $179
Also available: 110mm Barrel Handle Jigsaw $309 CJ110MVA
D Handle Jigsaw
FCJ65V3
• 400W Motor • Variable Speed • Compact & Lightweight
129
$
149
$
309
$
190mm Circular Saw Includes 2 x 40T Blades • 1010W Motor • Lightweight At 3.4kg • Aluminium Base With 68mm Depth Of Cut Also available: 165mm Circular Saw C6MFA $155
159
$
C7MFA
185mm Circular Saw
C7SB2-K
Includes 2 x Blades and Carry Case • 1710W Motor • Lightweight At 4.6kg • Aluminium Base With 60mm Depth Of Cut
259
$
235mm Circular Saw
C9SA2
• 2000W Motor • Lightweight At 6.8kg • Aluminium Base With 86mm Depth Of Cut
319
$
construction 22mm 2 Mode Rotary Hammer DH22PG • 620W Motor With 1.4 Joules Impact • SDS Plus Chuck With 22mm Max Drilling Capacity • Variable Speed With Reverse
229
• Counter balance mechanism to reduce vibration at the handle by up to 60% with shock absorbing rear handle • Vibration absorbing side handles • Gear sound reducing technology reducing tool noise
• 950W Motor With 9 Joules Impact • SDS Max Chuck With 38mm Max. Drilling Capacity • 12 Angle Chisel Position
$
bonus 1 x SDS Plus Bit Set
16.5KG Demolition Hammer
Reducing end user fatigue whilst improving tool performance.
DH38MS
699
$ Hitachi has introduced the following UVP features to their tool range to reduce end user vibration and fatigue.
38mm 2 Mode Rotary Hammer
H65SB2
Includes 1 x Chisel, 1 x Point and Case
5.9KG Demolition Hammer
H45MRY
• 950W Motor With 12.7 Joules Impact • SDS Max
• 1400W Motor • 42 Joules Impact Energy • 30mm Hex Drive
1199
$
999
$
NOW WITH NEW CASE! Shear • 400W Motor • Lightweight + Compact 1.7Kg • 1.6mm Cutting Capacity
599
$
CE16SA
Nibbler • 400W Motor •1.6mm Cutting Capacity • 3 Position Die Holder • Lightweight 1.6Kg
649
$
CN16SA
Metal Work 100mm Angle Grinder Pack G10SR3-BP
125mm Angle Grinder
Pack Includes: 730W Angle Grinder With 3 x Cutting Wheels, 1 x Grinding Wheel, 1 x Diamond Wheel, 1 x Tape Measure & Carry Case
• 1430W Motor • Soft Start, Constant Speed Control, Overload Protection, Kick Back Protection, 0 Voltage Restart • Tool-less Guard
Also available: 125mm Angle Grinder Pack G13SR3-BP $119
Also available: 125mm Angle Grinder G13VA $399
G13YF
125mm Angle Grinder
G13SB3
• 1300W Motor • Anti Vibration Side Handle • Tool-less Guard
99
$
369
279
$
125mm Angle Grinder Cutting Pack
G13SR3-CWP
Pack Includes: 730W Angle Grinder With 10 x Cutting Wheels, 1 x Grinding Wheel, 1 x Tape Measure & Carry Case
180mm Sander Polisher
SAT180
• 950W Motor • Lightweight At 2.9kg • 2 Speed Dust Sealed Unit
$
100mm Angle Grinder With Paddle Switch • 840W Motor • 196mm Ultra Slim Grip Circumference • Full Length Paddle Switch
Also available: 125mm Angle Grinder With Paddle Switch G13SQ $139
Also available: 100mm Angle Grinder Cutting Pack G10SR3-CWP $109
359
119
$
G18UBY
• 2400W Motor 5.1kg • Soft Start, Vibration Absorbing Main and Side Handle And Deadman Switch
319
$
$
NEW
129
$ 180mm Angle Grinder
G10SQ
230mm Angle Grinder • 2400W Motor • Anti Vibration Handle • Tool-less Guard
299
$
G23SE2
355mm Cut Off Machine • 2400W Motor • Quick Change Vice • Sturdy Aluminium Housing • Spark Diversion Guard • External Access To Carbon Brushes
CC14SF
389
$
tools & Accessories 38mm 3 Mode Rotary Hammer
DH36DAL
Fibre Cement Blade
797132
• 185mm x 2.2mm x 20mm • Suitable for All Fibre Cement Sheeting
Includes 2 x 2.6Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case • SDS Plus Chuck With 26mm Max Drilling Capacity • 3 Mode Action: Hammer Drilling For SDS Plus Drill Bits, Non Hammer Drilling For Adaptor Chuck With HSS Drill Bits and Hammering • 2 Power Mode
969
$
2 Piece Corded Combo Kit
PACK 234
Pack Contains: • G10SR3-BP Angle Grinder Pack • DV16VSS Impact Drill • 717105 105 Piece Bit Set • 2 x Carry Cases (Not Pictured) • Site Bag
5 Piece SDS Plus Sets • 751024 Includes - 6 & 8mm x 110mm - 6, 8 & 10mm x 160mm • 751023 Includes - 5, 6, 8, 10 & 12mm x 160mm
199
$
3 Piece Socket Adapter Set 1) ¼” Hex. Drive to 1/4” Square Drive 2) ¼” Hex. Drive to 3/8” Square Drive 3) ¼” Hex. Drive to 1/2” Square Drive
751970
Jigsaw Blades Pack
750049
• Includes 10 Blades in Plastic Case • Assortment of Timber and Metal Applications
82mm TCT Planer Blades • 750470 - 2 x 82mm TCT Planer Blades • 750471 - 10 x 82mm TCT Planer Blades
DISCLAIMER Prices effective from the 01/04/2012 to 30/06/2012 unless stock is sold out. All prices include GST unless otherwise marked. Prices and products are current at the time of printing but are subject to change without notice. Prices in this catalogue are a guide only, prices may vary from store to store. Accessories not included unless otherwise stated. Illustrations are for display purpose only. Not all items shown in this brochure are held in stock by retailers at all times. Orders can be taken for product not held in stock at time of enquiry. Errors and Omissions Excepted (E&OE). Brochure prepared by Hitachi Power Tools Australia Pty Ltd ABN 27 072 677 153 for use by participating retailers.
www.hitachi-powertools.com.au
Find Us On Facebook
To contact Hitachi scan this QR reader on your mobile device
