Transcript
EndaceODE 4000 Series Open Application Platform EndaceODE™️ appliances are designed to meet the needs of organizations looking to build their own customized packet capture and processing solutions. They are widely used on some of the world’s largest and most complex networks belonging to global telcos, ISPs and MSPs, banks and financial institutions, web and e-commerce giants and governments. EndaceODE appliances combine the guaranteed 100% data capture, proven performance and reliability of Endace DAGTM data capture cards with a highly optimized server platform. They offer a scalable, high-performance platform for use where commodity servers and network interface cards (NICs) simply cannot perform at the speeds or accuracy levels required. EndaceODE appliances have been engineered to handle the demands of continuous packet data processing on multiple 10GbE or SONET OC192/SDH STM64 links. They come with optimized drivers and are designed from the ground up to function as an integrated system that is fully supported by Endace. They run standard Linux operating system (OS) that can be used as is, enhanced or scrubbed, depending on the application requirements. This makes EndaceODE appliances easy to customize, and compatible with a wide range of security and network performance monitoring, archival, lawful intercept and other applications.
ENDACEODE 4000 SERIES AT A GLANCE • 1RU rack-mounted server • Two, high-performance Intel Xeon (Ivy Bridge) 10 core
CPUs, 64GB RAM, 480GB SSD system disk
• Lightweight, Linux-based OS • Dual, redundant power supplies • EndaceODE 4820: 4x SFP+ 1GbE/10GbE or SONET
OC192, SDH STM64 providing dechannelization to OC3/ STM1 and channel structures without external devices
• EndaceODE 4640: 8 x SFP+ 1GbE/10GbE or 2x 40GbE
BENEFITS Accurate • 100% accurate packet capture under continuous worst
case conditions of maximum line rate and minimum length (64 byte) packets • Nanosecond-level time-stamping accuracy with
synchronization from host, external time reference or dedicated IEEE 1588 ports
The built-in DAG data capture cards offload packet capture and processing overhead to onboard hardware, freeing up host CPU cycles for use by hosted applications. Because of this, no other customizable platform comes close to delivering similar levels of performance and efficiency.
Powerful
EndaceODE 4820
Flexible
The compact, 1RU EndaceODE 4820 is designed for telcos, ISPs and MSPs, governments and other organizations that need to process concatenated or channelized SONET/SDH, data flowing on OC192, 10GbE LAN and WAN-PHY links or monitor links in mixed mode environments. When working in 10GbE LAN, 10GbE WAN-PHY and OC192c/STM64c the transmit side can be configured for 10GbE LAN for a unified back-end packet forwarding solution.
• Open architecture allows easy integration with in-house
The EndaceODE 4820 has four SFP+ monitoring ports which can each be configured for monitoring SONET/SDH or 10GbE links. In SONET/SDH mode the ports support sophisticated dechannelization of SONET OC192 and SDH STM64 down to OC3/ STM1 in any channelization hierarchy while extracting PoS and ATM mapping or just the raw payload. They can also extract SONET/STM overhead fields and deliver them to software without software, without processing, for covert channel analysis.
Reliable
page 1
• Integrated DAG technology offloads packet capture,
filtering, classification and replication to hardware, freeing up CPU cycles for hosted applications • Low size, weight and power (SWaP) consumption
developed or third-party commercial and open source network monitoring and security applications • Each monitoring port can be independently configured as
1GbE or 10GbE, or 4 ports can be configured as a single 40GbE interface • Supports multiple individual capture streams with
configurable memory allocation per stream for load balancing in multi-core host architecture
• Redundant power supplies • Engineered for high-reliability and extended mean time
between failure (MTBF) rates
© Copyright Endace Technology Limited, 2016. All rights reserved.
endace.com END_ds_endaceode_4000_1.0_0316
These capabilities allow a single ODE 4820 to replace numerous SONET ADMs and SONET capture devices - reducing power, cooling and rackspace requirements and dramatically lowering operating costs. The EndaceODE 4820 supports a variety of bit and byte level capture modes where data is captured “as is” at a user-specified link frequency. This unique feature enables deep level analysis of links for troubleshooting and other forensic purposes.
EndaceODE 4640 With eight SFP+ monitoring ports, each individually configurable for monitoring either 1GbE or 10GbE links (four 10GbE ports can also be combined to monitor 40GbE), the EndaceODE 4640 is a high-density, compact 1RU appliance. It provides the perfect platform for building custom 1GbE/10GbE or 40GbE monitoring solutions where rack-space is at a premium.
Companion Products The following products are compatible with the EndaceODE series:
Transceivers A range of fiber optics and electrical transceivers for all supported interfaces is available.
40GbE and 100GbE Network Visibility Head-Ends EndaceAccess 40
EA 40
EndaceAccess 100
EA 100
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the Federal Communications Commission [FCC] Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction document, may cause harmful interference to radio communications. Endace™, the Endace logo and DAG™ are registered trademarks in New Zealand and/or other countries of Endace Technology Limited. Other trademarks used may be the property of their respective holders. Use of the Endace products described in this document is subject to the Endace Terms of Trade and the Endace End User License Agreement (EULA).
page 2
Technical Specifications EndaceODE 4820
EndaceODE 4640
Monitoring ports
4x SFP+ ports individually configurable for OC192/STM-64 or10GbE
8x SFP+ ports individually configurable for 1GbE or10GbE
SONET/SDH overhead access
Complete
N/A
CPU/Cores
Two Xeon 2.8GHz (Ivy Bridge) 10-core CPUs
Memory
64GB DDR3 RAM
Management interfaces
4x 1GbE, 2x 10GbE, 1x IPMI
Time synchronization
1 configurable as either 1PPS, IRIG-B or PTP
System drive
480GB solid state (SSD) drive
Power supply
650W
Size
1U 19-inch rack mount
Dimensions
Height: 43mm (1.7”) Width: 483mm (19”) Length: 650mm (25.6”)
Weight
25kg (55lbs)
Maximum power consumption
650W (4820 power consumption 11 μ Joule/ packet) (4640 power consumption 5.5 μ Joule/ packet)
Operating temperature
10-35°C (50-95°F)
Operating humidity
8-90% non-condensing
For more information on the Endace portfolio of products, visit: endace.com/products For further information, email:
[email protected]
© Copyright Endace Technology Limited, 2016. All rights reserved.
endace.com END_ds_endaceode_4000_1.0_0316
