Transcript
Energy Lithium-ion Battery System Lead-acid Batteries Battery Isolators Battery Separators Battery Chargers Equalizers Vo l t a g e C o n v e r t e r s Inverters Generator Sets Alternators Windchargers Solar Panels
by
Energy Pack CLAYTO
High Performance Lithium-ion Battery System
Lithium (LiFePO4) is the lightest of all metals; it has the greatest electrochemical potential and provides the largest energy density per weight. Rechargeable batteries using lithium metal anodes (negative electrodes) are capable of providing both high current and excellent capacity, resulting in an extraordinary high energy density. They have no memory effect and therefore no scheduled cycling is required to prolong the battery’s life. Benefits of lithium-ion batteries versus traditional lead-acid batteries: - 3 to 4 times smaller in weight. - Compact. - Fast charging. - Long life time: over 3000 cycles. - Low self-discharge rate. - Maintenance free. - Environment protection (no free lithium metal).
Display/remote
G3 Combi Combined inverter/charger
12V Output
12VDC - 400Ah Lithium Battery
148
The Battery Management System (BMS) allows for optimal charge and discharge control of every single cell, cell temperature control and cell balancing. The Battery Management System (BMS) uses a triple security system based on a combination of software and hardware security. The system is equipped with an analogue and digital fuel gauge output that makes it possible to add a sophisticated display showing all relevant data about the lithium battery pack. As an extra service feature the BMS models are equipped with a diagnostic output system which can be accessed from a laptop. It provides an extensive update on the system, information about the status of the lithium battery, information about battery condition, statistics of the charge cycles...
230V Input
Starterbattery
PCM Relay box
230V Output
Alternator
Ref.
Model
Dimensions
Weight
by
High Performance Lithium-ion Battery System
Charge Time *
KN080 100 A.h - 12 VDC 283 x 183 x 324mm 17 kg KN081 160 A.h - 12 VDC 314 x 213 x 336mm 27.5 kg KN082 200 A.h - 12 VDC 317 x 366 x 298mm 37 kg KN083 400 A.h - 12 VDC 352 x 469 x 348mm 61 kg KN090 100 A.h - 24 VDC 380 x 415 x 265mm 43 kg KN091 160 A.h - 24 VDC 435 x 425 x 320mm 63 kg KN092 200 A.h - 24 VDC 490 x 540 x 295mm 85 kg 12 VDC with G3 Combi inverter-charger 2000 W / 100 A : Ref: KN012, 24 VDC with G3 Combi inverter-charger 2300 W / 50 A : Ref: KN030
1h 1.5 h 2h 4h 2h 3h 4h
G3 Combi Inverter-chargers The Inverter/Charger G3 Combi is a combination of a pure sine wave inverter and an intelligent battery charger. It is a 100% efficient for an operating temperature range between -20°C and +50°C. See page 164 for detailed characteristics
Ref. KN027 KN025 KN012 KN028 KN029 KN030
Input Voltage
Output Voltage
Dimensions
Weight
Continuous Power
Power @ 15 min.
Surge Power
Charge Current
12 V 12 V 12 V 24 V 24 V 24 V
230 V 50 Hz 230 V 50 Hz 230 V 50 Hz 230 V 50 Hz 230 V 50 Hz 230 V 50 Hz
299x198x116mm 299x198x116mm 376x198x116mm 376x198x116mm 376x198x116mm 376x198x116mm
7.5 kg 7.5 kg 9.5 kg 7.5 kg 7.5 kg 9.5 kg
1000 W 1300 W 2000 W 1000 W 1500 W 2300 W
1200 W 1500 W 2300 W 1200 W 1700 W 2500 W
2000 W 3000 W 4000 W 2000 W 3000 W 4500 W
50 A 80 A 100 A 30 A 40 A 50 A
Remote Panel The G3 remote panel works as an on/off switch and monitors the amp-hours consumed and the state of charge. A single G3 display can control up to four G3 power units (sine wave inverters or inverter/chargers). Ref. KN013
Voltage
Dimensions
Weight
12-24 V DC
88x137x37mm
0.4 kg
149
AGM Spiral Cell Batteries 1 2 V S t a r t i n g B a t t e r i e s a n d 1 2 V D u a l Pu r p o s e B a t t e r i e s
Energy
Their unique design provides high power output faster and longer than conventional batteries, resulting in greater cranking ability and less capacity reduction at high current loads. Blue Top Batteries are spill proof, so they can be mounted anywhere inside a boat and in almost any position. No gasses and no electrolyte loss. No corrosion of terminals or connected equipments. Can withstand vibrations. Fast charging and low self-discharging effect.
Optima Spiracell® Technology: Instead of conventional flat plates, OPTIMA Blue Top Batteries use a spiral wound plate configuration with a glass mat that absorbs electrolyte like a sponge. Thanks to rugged cell interconnection, they will resist heat, vibrations and humidity extremely well. All batteries are factory tested and receive an identification number.
A
B Ref: BA806 Starting Battery – 12 V Capacity: C20: 50 A.h – CCA: 815 A*. Dimensions (LxWxH): 254x174x200mm. Highly recommended for high starting performances. Typical Applications: Bow thruster, windlass, genset, engine starting (diesel or gasoline). More efficient than a traditional lead / acid battery, it will advantageously replace an existing battery bank 2 to 3 times its size.
12 V Dual Purpose Batteries – Starting / House A Ref: BA816 Capacity: C20: 55 A.h – CCA: 690 A*. Dimensions (LxWxH): 254x174x200mm. B Ref: BA852 Capacity: C20: 75 A.h – CCA: 975 A*. Dimensions (LxWxH): 324x166x238mm. * DIN standard, @ 0°C.
AGM Flat Plate Batteries 6 V and 12 V House Batteries Rolls for excellence! For over 60 years, Rolls has been manufacturing top quality batteries. AGM batteries use Resistox “Positive Plate Design” a very high active material allowing greater performance and durability.
Ref. BX085 BX115 BX145 BX210 BX215 BX250 BX415
Voltage
Capacity, C20
CCA @ SAE 0°C
Dimensions
Weight
12 V 12 V 12 V 12 V 12 V 6V 6V
85 A.h 115 A.h 145 A.h 210 A.h 215 A.h 250 A.h 415 A.h
854 A 975 A 1200 A 1425 A 1646 A 1100 A 2180 A
260x168x237mm 328x172x236mm 341x173x309mm 530x209x218mm 381x178x371mm 262x181x273mm 295x178x424mm
25 kg 33 kg 44 kg 61 kg 60 kg 35 kg 56 kg
Absorbed Glass Mat sealed maintenance free batteries (electrolyte is absorbed by a glass mat and does not need periodic refill). Their construction allows for high current discharge, making them an ideal choice for applications such as thruster, windlass or engine starting.
150
Flooded Batteries 12 V Starting Batteries BANNER PowerBull Range
Capacity, C20
CCA @ SAE 0°C
Dimensions
Weight
Terminal position
BA044
44 A.h
420 A
210x175x175/175mm
12 kg
Right
BA055
55 A.h
480 A
241x175x175/175mm
14 kg
Right
BA062
62 A.h
510 A
241x175x175/175mm
15 kg
Right
BA066
66 A.h
540 A
278x175x175/175mm
17 kg
Right
BA074
74 A.h
700 A
278x175x175/175mm
17 kg
Right
BA080
80 A.h
700 A
315x175x175/175mm
19 kg
Right
BA088
88 A.h
680 A
354x175x175/175mm
21 kg
Right
BA099
100 A.h
780 A
354x175x190/190mm
23 kg
Right
Ref.
Energy
Lead / Calcium Maintenance-Free Technology. “Double Top” patent for double leak protection, allows mounting at angles up to 45°. Optimal starting performance under any weather condition.
Gamme Banner - Buffalo Bull High Cold Crank Capacity. Vibration resistant. Capacity, C20
CCA @ SAE 0°C
Dimensions
Weight
Terminal position
BA125
125 A.h
720 A
345x172x260/283mm
35 kg
Left
BA140
140 A.h
800 A
514x189x195/220mm
36 kg
Left
BA180
180 A.h
900 A
514x223x195/220mm
44 kg
Left
BA225
225 A.h
1050 A
517x273x212/240mm
61 kg
Left
Ref.
BANNER RunningBull Range Optimum starting power. Vibration resistant. Leak-proof. Latest AGM technology. Totally maintenance-free. Capacity, C20
CCA @ SAE 0°C
Dimensions
Weight
Terminal position
BH075
75 A.h
760 A
278x175x190/190mm
21 kg
Right
BH097
92 A.h
850 A
354x175x190/190mm
28 kg
Right
Ref.
12 V Dual Purpose Batteries – Starting / House BANNER Energy Bull Range Extremely cycle resistant and durable (320 to 380 cycles*). Optimized cold start. Vibration resistant. Safe handling thanks to the 4-chamber leak protection system. * 100 to 120 cycles for conventional batteries @ 50 % discharge. Ref. BM061 BM081 BM100 BM131 BM181
Voltage
Capacity, C20
CCA (EN)
Dimensions
Weight
12 V 12 V 12 V 12 V 12 V
60 A.h 80 A.h 100 A.h 130 A.h 180 A.h
430 A 570 A 600 A 620 A 930 A
242x175x190mm 278x175x190mm 354x175x190mm 514x190x215mm 512x222x215mm
17 kg 20 kg 24 kg 38 kg 47.5 kg
6 V and 12 V House Batteries Deep Cycle Wet Batteries, with explosion-proof plug. Safe and suited for marine applications. Ref. 6-FS-220 6-FS-235 6-FS-350 6-FS-400 6-FS-450 BR300 BR125 BR200 BR275
Nominal Voltage 6V 6V 6V 6V 6V 12 V 12 V 12 V 12 V
Capacity, C20 220 A.h 235 A.h 350 A.h 400 A.h 450 A.h 105 A.h 125 A.h 200 A.h 275 A.h
CCA @ SAE 0°C
Dimensions
Weight
888 A 948 A 1333 A 1523 A 1713 A 506 A 493 A 810 A 1444 A
259x180x264mm 259x180x275mm 318x181x426mm 318x181x426mm 318x181x426mm 316x168x235mm 343x171x241mm 391x178x365mm 527x279x254mm
31 kg 34 kg 52 kg 56 kg 59 kg 31 kg 35 kg 57 kg 82 kg
151
Gel Batteries 12 V Flat Plate House Batteries
Energy
Spill proof and maintenance free. Flat plate design. Engineered and manufactured for long life in deep cycling applications. Excellent deep discharge resilience performance. Low self-discharge rate. CE, UL, VDS, IEC and PTC approved. Ref.
Negative Terminal
Nominal Capacity @ 20 hours
Dimensions LxWxH
Weight
Terminal Type
12 V 12 V 12 V 12 V 12 V
65 A.h 80 A.h 100 A.h 140 A.h 200 A.h
325x168x175mm 330x173x242mm 330x173x242mm 485x170x242mm 530x240x218mm
21.6 kg 30.4 kg 36.4 kg 51.6 kg 62 kg
T6 T6 T6 T6 T6
Profondeur de décharge en % Depth of Discharge (%)
BG225 BG221 BG222 BG223 BG224
Voltage
Positive Terminal
Number of Cycles Nombre de cycles
2 V O P z V Tu b u l a r P l a t e H o u s e B a t t e r i e s Germanisher Lloyd approval for marine applications. Possible horizontal mounting, maintenance free. Designed service life: 18 years @ 20°C, floating mode; 1200 cycles in compliance with IEC 896-2. Supplied with connecting cables.
Ref.
x6 Pa
ck Quantity
x12 or
Pa
ck Quantity
BS293 BS294 BS295 BS296 BS297 BS298 BS299 BS300 BS301 BS302 BS303 BS304 BS305 BS306
DIN Ref.
Nominal Voltage
Capacity, C10
Dimensions
Length *
Weight
4 OPzV200 5 OPzV250 6 OPzV300 5 OPzV350 6 OPzV420 7 OPzV490 6 OPzV600 8 OPzV800 10 OPzV1000 12 OPzV1200 12 OPzV1500 16 OPzV2000 20 OPzV2500 24 OPzV3000
2V 2V 2V 2V 2V 2V 2V 2V 2V 2V 2V 2V 2V 2V
224 A.h 280 A.h 337 A.h 416 A.h 499 A.h 582 A.h 748 A.h 998 A.h 1248 A.h 1497 A.h 1643 A.h 2190 A.h 2738 A.h 3286 A.h
104x207x401mm 125x207x401mm 146x207x401mm 125x207x401mm 146x207x517mm 167x207x517mm 146x207x693mm 211x234x693mm 211x276x693mm 211x276x693mm 211x276x843mm 214x399x819mm 214x488x819mm 213x577x819mm
113mm 134mm 155mm 134mm 155mm 176mm 155mm 210mm 220mm 220mm 220mm 223mm 222mm 222mm
18 kg 22 kg 25 kg 32 kg 37 kg 42 kg 50 kg 68 kg 82 kg 98 kg 112 kg 153 kg 196 kg 225 kg
C10 capacity @ 1.5 V @ 20°C. * Including cable.
Lo w B a t t e r y Vo l t a g e Pr o t e c t i o n Protects the battery against excessive discharge and also protects users in case of over voltage. Nominal voltage: 12 V / 24 V (depends on jumpers). Programming of connection and disconnection voltages by jumpers (10 thresholds). MOSFET switches, therefore no sparks. Alarm output to indicate excessive voltage drops. Dim. HxWxL (mm): 80x60x40. Protection: IP66. Ref: SB100 40 A Ref: SB101 60 A Ref: SB102 200 A
152
Energy
Battery Accessories
Ref: BS005 Battery Holder Internal dim.: 450x200x235mm.
Battery Holders Ref: K170 Small model Internal dim.: 280x190x200mm.
Ref: K976 Battery Holder Supplied with adjustable partition and strap. Dim.: 410x200x200mm.
Battery Holders Watertight @ 60cm. Lockable cover with gasket and vent diameter 25mm. Protection: ISO 8846. Ref: BS001 Small model Internal dim.: 265x185x230mm. External dim.: 390x220x335mm. Ref: BS002 Large model Internal dim.: 355x185x230mm. External dim.: 470x220x335mm. RELATED PRODUCTS Watertight Cable Outlets Ref: QX811 For 6-11mm OD Ref: QX813 For 10-13mm OD Ref: QX816 For 12-16mm OD
x10 Pa
Ref: K047 Strap Mounting Kit Length: 1300mm.
ck Quantity
Battery Terminal Connectors Ref: AF085 20 to 40mm2 positive battery cable Ref: AF086 20 to 40mm2 negative battery cable Ref: AF185 40 to 60mm2 positive battery cable Ref: AF184 40 to 60mm2 negative battery cable Ref: AF186 60 to 95mm2 positive battery cable Ref: AF187 60 to 95mm2 negative battery cable
Ref: K257 Strap Only Length: 1360mm.
x5 Pa
Ref: AF105 Battery Hydrometer
Battery Clips Ref: AF035 Positive clip Ref: AF036 Negative clip
ck Quantity
Quick Connectors Ref: AF800 19.3mm positive cable Ref: AF801 19.3mm negative cable
x10 Pa
ck Quantity
Battery Connectors Ref: AF100 Positive connector Ref: AF101 Negative connector
153
Electronic Battery Isolators Q u i c k Ra n g e Isolate each battery to prevent multi-battery drain. Automatically direct the charge current towards the most discharged battery. No voltage drop. Suitable for complete and fast charging of 2-3 battery banks (12 V or 24 V). Status light.
43 / 64 )
A
47 / 64 )
68 (2
44 (1
190 (7
31 / 64 )
195 (7
43 / 64 )
95 (3 3 / 8 )
135 (5 5 / 16 )
Energy
S t u d e r Ra n g e
B
Reference
RC162
A
Max charge current per input Number of inputs Number of outputs Weight Dim. HxLxW
160 A
A
RC163
RC123
B
160 A
100 A
A
RC202
A
220 A
RC203 220 A
1 1 2 1 1 2 3 3 2 3 1170 g 1250 g 1140 g 1220 g 1250 g 68x195x135mm 68x195x135mm 90x160x150mm 68x195x135mm 68x195x135mm
Diode Battery Isolators Eliminate multi-battery drain when two or more battery banks are in a charging system. Isolate each battery circuit and allows each battery to discharge and charge according to its own needs. Low voltage drop thanks to compensation diodes which enable to slightly increase the output of the alternator.
Ref: DK001 Diode Kit Compensation diode to be fitted on the alternator for isolators without integrated compensation diode.
Reference Max charge current per input Number of inputs Number of outputs Compensation diode Length
154
SR702
SR724
SR703
SR734
SR704
SR272
SR273
SR274
SR122
SR123
SR323
SR324
SR162
SR163
SR202
70 A
70 A
70 A
70 A
70 A
70 A
70 A
70 A
120 A
120 A
120 A
120 A
160 A
160 A
200 A
1 2 0 114mm
1 2 1 114mm
1 3 0 114mm
1 3 1 114mm
1 4 0 165mm
2 2 0 165mm
2 3 0 165mm
2 3 2 165mm
1 2 0 165mm
1 3 0 165mm
2 3 0 317mm
2 3 2 228mm
1 2 0 228mm
1 3 0 228mm
1 2 0 228mm
Battery Separators B E P Ra n g e
Reference
Energy
The Voltage Sensitive Relay (VSR) allows two batteries to be charged at the same time. When the engine is started and the starting battery reaches 13.7 volts, the VSR engages, allowing two battery banks (starting and house) to be charged simultaneously. When the voltage drops below 12.8 volts (e.g. the engine is stopped), the VSR disengages, separating the batteries. This system eliminates the possibility of draining the starting battery and protects sensitive electronic equipment powered by the house battery from harmful engine start up spikes. Ignition protected: UL 1107. AD060 12 V
Max charge current Number of outputs Cut-in voltage Cut-out voltage Type Dim. LxWxH
125 A continuous – 150 A intermittent 1 13.7 V 12.8 V Mechanical switching 69x69x50mm
Pre-wired battery distribution clusters available on single, dual or triple engine configurations.
300 A model available with emergency switch on request. 12 V or 24 V versions.
G e n o i s Ra n g e A Ref: SB020 12 V Battery Separator Allows two batteries to be charged by the same alternator. Nominal voltage: 160 A. Max charge current: 200 A intermittent, 500 A / 1 sec. @ 23°C. Cut-in voltage: 13.4 V. Cut-out voltage: 12.8 V. Time delay: 10 sec.
B Ref: SB005 12 V Battery Separator Max charge current: 80 A High voltage level: 13.4 V. Low voltage level: 12.6 V. One output. Dim. (LxWxH): 87.7x60x35mm.
A
B
ALTERNATOR
Ref: SB021 Same as SB020 with input from key switch to allow paralleling of batteries.
HOUSE BATTERY
STARTING BATTERY
BATTERY SEPARATOR
S t u d e r Ra n g e Dual Voltage Battery Separator – 12 V or 24 V Starting battery and house battery must have the same nominal voltage. Reference Max charge current Number of outputs Cut-in voltage Cut-out voltage Dim. LxWxH
SB010 12 V or 24 V 160 A 1 13.2 V (12 V) – 26.4 V (24 V) 11.8 V (12 V) – 23.6 V (24 V) 93x46x96mm
S u r e Po w e r Ra n g e This battery separator features an additional input from a key switch or manual switch so that the separator will parallel the batteries during starting to provide maximum cranking capacity. Engine start signal override: > 3 V (starting battery) and > 10 V (house battery). Max lamp output current: 250 mA.
Reference Max charge current Number of outputs Cut-in voltage Cut-out voltage Dim. LxWxH
SR131 100 A 1 13.2 V 12.8 V 76.2x82.6x63.5mm
155
by
Chargers QUIC
Battery Chargers – Mini / Low Power Range The Quick® energy range includes a line of SBC ADVANCED PLUS switching technology battery chargers, which are among the most sophisticated products available on the market.
Model / Battery Capacity (A.h) 35 80
12V QC100 55 120
12V QC140 110
a
250
12V QC250 55
120
24V QC285
B 140
Mini Power
300
12V QC300 180
400
12V QC500
Low Power 270
600
12V QC700 140
300
24V QC650 360
Three stage IUoU battery charging. Multiple outputs in order to charge more groups of batteries (internal battery isolator diodes). Charge selector for liquid/gel electrolyte batteries. Low residual fluctuation on output (ripple lower than 30 mV RMS). Universal AC supply input (DR models). Compatible with every kind of generators. Capable of operating in a wide range of ambient temperatures. 3 status LEDS (power ON, charge stage, error).
800
12V QC910 270
600
24V QC945 360
800
24V QC995 720
1600
12V QC910 (2, parallel wiring) 540
1200
24V QC945 (2, parallel wiring) 720
Protection features: Reverse polarity (with internal fuse). Overload, output short circuit, overheating.
1600
24V QC995 (2, parallel wiring) 1080
2400
12V QC910 (3, parallel wiring) 810
1800
Classification: Safety classification EN 60335-2-29 and EMC Class EN 55022/B.
24V QC945 (3, parallel wiring) 1080
2400
24V QC995 (3, parallel wiring)
Easy and Fast Installation 1. Mount the two lower screws. 2. Slide the charger on the screws. 3. Mount the two upper screws. 4. Connect the charger to the battery with the supplied terminals. 5. Connect the AC cable to the mains. Reference Battery voltage Maximum output current Charge absorption voltage Charge float voltage Number of outputs Input voltage Cooling Dimensions Weight
156
A
QC100
12 V 8A 14.1 V (14.4 V Gel mode) 13.5 V (13.8 V Gel mode) 2
A
QC140
12 V 12 A 14.1 V (14.4 V Gel mode) 13.5 V (13.8 V Gel mode) 2
207 to 260 V / 45 to 66 Hz Natural 1.3 kg
Forced w/ controlled fan 155 x 205 x 75mm
B
QC250
B
QC285
12 V 24 V 25 A 12 A 14.1 V (14.4 V Gel mode) 28.2 V (28.8 V Gel mode) 13.5 V (13.8 V Gel mode) 27 V (28.6 V Gel mode) 3 2 207 to 260 V / 45 to 66 Hz 207 to 260 V / 45 to 66Hz 103 to 130 V / 45 to 66 Hz Forced w/ controlled fan Forced w/ controlled fan 155 x 268 x 75mm 2.3 kg 2.3 kg
Three stage IUoU battery charging. Multiple outputs in order to charge more groups of batteries (internal battery isolator diodes). Differentiated charging for liquid electrolyte or gel batteries. Integrated fuses inside the battery chargers (one for each output). Thermal battery protection (with optional sensors). Ability of providing full output power with low supply voltage. Low residual fluctuation on output (ripple lower than 30 mV RMS). Universal AC supply input (FR models SBC 1450 ADV and SBC 1950 ADV excluded). Compatible with every kind of generators. Capable of operating in a wide range of ambient temperatures. Variable speed for the cooling fan. High-technology control panel. Automatic and manual half power mode (with optional CAN terminal). CAN BUS interface for data transfer. Current sharing (only HI-Power).
D
by
Battery Chargers – Medium / High Power Range
Medium Power
C
Protection features: Reverse polarity (with internal fuses). Overload, output short circuit, overvoltage in output. Overheating, battery overtemperature (with optional sensors).
E Medium Power
Classification: Safety classification EN 60335-2-29 and EMC Class EN 55022/B.
ACCESSORIES Ref: QC154 Remote Control Panel for model QC300 to QC995. Displays battery voltage, charge current and status information. Ref: QC101 4-channel Temperature Compensation Interface
Reference Battery voltage Maximum output current Charge absorption voltage Charge float voltage Number of outputs Input voltage Cooling Dimensions Weight Reference Battery voltage Maximum output current Charge absorption voltage Charge float voltage Number of outputs Input voltage Cooling Dimensions Weight
C
QC300
Hi Power
C
QC500
D
12 V 12 V 30 A 40 A 14.1 V (14.4 V Gel mode) 14.1 V (14.4 V Gel mode) 13.5 V (13.8 V Gel mode) 13.5 V (13.8 V Gel mode) 3 3 83 to 280 V / 45 to 66 Hz Controlled fan 272 x 334 x127mm 4.2 kg 4.2 kg E
QC910
12 V 80 A 14.1 V (14.4 V Gel mode) 13.5 V (13.8 V Gel mode) 3 83 to 280 V / 45 to 66 Hz to 66 Hz Controlled fan 272 x 495 x127mm 7.1 kg
E
QC650
D
QC701
24 V 12 V 30 A 60 A 28.2 V (28.8 V Gel mode) 14.1 V (14.4 V Gel mode) 27 V (28.6 V Gel mode) 13.5 V (13.8 V Gel mode) 3 3 83 to 280 V / 45 to 66 Hz Controlled fan 272 x 412 x 127mm 5.4 kg 5.4 kg QC945
E
QC995
24 V 24 V 60 A 80 A 28.2 V (28.8 V Gel mode) 28.2 V (28.8 V Gel mode) 27 V (28.6 V Gel mode) 27 V (28.6 V Gel mode) 3 3 150 to 280 V / 45 to 66 Hz Controlled fan 272 x 495 x127mm 7.1 kg 7.1 kg
157
Compact Battery Chargers
Energy
Highly versatile, easy to use, compact battery chargers. Perfectly suited to a wide range of applications and virtually any situation where a lead acid traction or leisure battery is used. They are also ideal if you want to leave the charger switched on for a long period of time, to maintain the charge of a battery on a boat or recreational vehicle over the winter period.
IP65
IP44
No sparks, short-circuit and reverse polarity protection. Marine chargers CK200 and CK251 feature a night operating mode: built-in fan is disabled and current output is reduced, providing silent operation during eight hours.
Ref. CK080 CK360 CK500 CK700 CK250 CK140 CK200 CK251
Battery voltage 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V
Max. charge Max. battery current capacity 0.8 A 3.6 A 5A 7A 25 A 14 A 15 A 25 A
32 A.h 120 A.h 160 A.h 225 A.h 500 A.h 500 A.h 500 A.h 500 A.h
Dimensions
Weight
IP rate
Night mode
142x51x36mm 165x61x38mm 168x65x38mm 191x89x48mm 233x128x64mm 233x128x64mm 233x128x64mm 233x128x64mm
0.3 kg 0.5 kg 0.6 kg 0.8 kg 1.4 kg 1.4 kg 2.1 kg 2.1 kg
IP65 IP65 IP65 IP65 IP44 IP44 IP44 IP44
No No No No No No Yes Yes
Ref: CK802 Comfort Indicator Panel * Offers easy access for viewing the battery status from a standard panel of a boat, truck or in the workshop. Integrated socket for the battery charger. Fuse: 15 A. Dimensions: 35x21x50mm. * Only for 12 V chargers, reference CK080, CK360 and CK700.
Waterproof (IP67) Battery Chargers Compact battery charger intended for lead acid and gel batteries. Vibration resistant and shockproof. Rugged lacquered aluminum casing. Silent operation. Working temperature range: -30°C to +55°C.
Ref. SR043 SR041 LM001
158
Mains voltage
Battery voltage
Charge current
Dimensions
Weight
IP rate
90VAC – 270VAC / 50-60Hz 90VAC – 270VAC / 50-60Hz 230VAC +/-15%
12 V 24 V 12 V
17 A 12 A 6A
192x98x47mm 192x98x47mm 80x125x35mm
1.4 kg 1.4 kg 900 g
IP67 IP67 IP67
Multibank Charger – 3 Independently Controlled Outputs Specifically designed for marine applications, it provides longer battery life by independently controlling the charge profile for each battery bank. The XC charger can charge up to 3 different battery chemistries simultaneously. This unique multiplex design means that boaters can choose the optimal battery type for each application on their boat without concern about battery damage from either under- or overcharging.
Energy
Three independently controlled output banks accommodate different battery chemistries and states of charge simultaneously. Settings for flooded, gel, AGM, lead-calcium or custom battery types. Auto-ranging universal input voltage (100-260 VAC, 47-63Hz) is also compatible with any kind of generators. Independent temperature compensated charging on each of the three output banks. Upgradeable for network communications. Invertible and detachable digital display. Includes one battery temperature sensor; additional battery temperature sensors available. Protection Features: True reverse polarity protection (no fuses). IP32 environmental enclosure rating against moisture. Over temperature protection. DC over voltage protection. Ignition protection. Ref: IX824 Output current: 25 A. Output voltage: 24 V DC - Input voltage: 100 - 260 V 47/63 Hz. DC output connections: M6 studs. Dimensions: 106x240x368mm (including mounting flanges). Weight: 6 kg.
ACCESSORIES
Invertible and detachable digital display. The panel can be removed from the charger and installed up to 20m away for remote control and monitoring. - State of charge, battery bank voltage and current. - Fault or warning messages. A shunt can be provided as an option to measure amp-hours consumed by each battery bank.
Ref: IX314 Shunt Ref: IX316 Temperature Probe Ref: IX254 10m Extension Cable for Remote Control
12 / 24 V Equalizers Scenario 1 – Installation with a 24 V alternator The equalizer can provide a 12 Volt power source from a 24 Volt electrical system, while keeping the 24 Volt source available. Unlike a converter which “converts” 24 Volt into 12 Volt, an equalizer balances the voltage of the two batteries in series and the 12 Volt load current is drawn from both batteries. All 12 Volt loads with high inrush current (pumps, etc.) will be powered since they are directly connected to the 12 Volt battery bank. However their nominal current must not be above the current limit of the equalizer in order to allow battery equalization. Typical application: powering of a 12 Volt cooling unit whereas the installation features a 24 Volt house battery. Ref: SR204 Ref: SR042 Ref: SR205 Ref: SR206
Equalizer, 24/12 V DC 40 A Equalizer, 24/12 V DC 60 A Equalizer, 24/12 V DC 80 A Equalizer, 24/12 V DC 100 A
Scenario 2 – Installation with a 12 V alternator The equalizer can charge a 24 Volt battery bank from a 12 Volt alternator thus providing a dual voltage installation. Nominal current of 12 Volt loads must not be above the current limit of the equalizer in order to allow battery equalization. Ref: SR203 Equalizer, 12/24 V DC 40 A
159
24-12 V DC Voltage Converters
Energy
High quality converters for navigational instruments and communication devices. Quiet operation. Lightweight and compact. Available in isolated or non-isolated configurations. Casework: anodized aluminum, glass filled polycarbonate, dust, water and impact resistance to IP533. Easy installation: supplied with a ‘Click ‘n’ fit mounting clip, fitted separately using three hole fixing. Ref. KC010 KC011 KC012 KC014 KC013 KC016 KC020 KC021 KC022 KC023
Isolated
Output current Continuous/Intermittent
Dimensions
Weight
No No No No No No Yes Yes Yes Yes
3/6 A 6/10 A 12/18 A 18/21 A 24/30 A 50/60 A 3/6 A 6/10 A 12/18 A 24/30 A
71x87x50mm 88x87x50mm 126x87x50mm 166x87x50mm 166x87x50mm 300x80x80mm 88x87x50mm 126x87x50mm 166x87x50mm 216x87x50mm
0.256 kg 0.318 kg 0.455 kg 0.600 kg 0.600 kg 1.2 kg 0.318 kg 0.455 kg 0.600 kg 0.750 kg
IP65 rated versions available on request: - Dust, water and vibration resistance. - Cable gland + 1 meter cable.
« i » : isolated configuration.
Galvanic Isolators
Voltage Converters
A
Reference Input voltage Output voltage Output current Isolated Dim. LxWxH Weight
KC122
KC112
Any boat connected to shore power is exposed to galvanic and stray current corrosion which occur between pontoon and boat or between one boat and another. The only real and safe protection consists in installing a galvanic isolator to eliminate ground electrical continuity between the AC shore power and the boat. Easy to connect, it will increase the lifetime of your sacrificial anodes and efficiently protect all the equipments below the water line: motor brackets, propeller, sea cocks, etc.
PS011
9 V to 18 V 10 V to 18 V 10 V to 15 V 24 V 24 V 24 V 15 A 7A 25 A Yes No No 160x183x64mm 115x90x50mm 283x125x74mm 1.4 kg 0.477 kg 1.86 kg
Ref: SM001 Max continuous current: 16 A @ 220 V Dimensions: 200x120x60mm. Ref: SM002 Max continuous current: 30 A @ 220 V Dimensions: 147x141x65mm. 60 A model available on request.
Isolated Stabilizers Protect equipments from electrical noise and spikes.
Reference Input voltage Output voltage Output current Isolated Dim. LxWxH Weight
160
PS001 12 V +/-30% 13.6 V 3A Yes 89x87x50mm 0.29 kg
PS002
KC117
KC125
KC123
KC124
12 V +/-30% 9 V to 18 V 9 V to 18 V 20 V to 35 V 20 V to 35 V 13.6 V 12.5 V 12.5 V 24 V 24 V 6A 16 A 30 A 15 A 8A Yes Yes Yes Yes Yes 167x87x50mm 182x88x49mm 160x183x64mm 160x183x64mm 182x88x49mm 0.59 kg 0.6 kg 1.4 kg 1.4 kg 0.6 kg
12/24 V DC – 230 V AC Modified Sine Wave Inverters X a n t r e x Ra n g e Xantrex inverters can power household AC appliances from a 12 V DC source. Silent operation. Auto shutdown to prevent deep battery discharge. Supplied either with a cigarette plug wire or a battery clip wire assembly.
Reference Output voltage Input voltage Continuous power Surge capacity Protection features Dim. (LxWxH) Weight
IX060
Energy
Connected to your battery bank a power inverter can efficiently and reliably power TVs and VCRs, laptop computers, camcorders and cell phone chargers, compact fluorescent lights, soldering irons, etc. Low battery voltage alarm: 10.7 V / 21.6 V. Low battery voltage shutdown: 10 V / 21 V.
IX061
IX062
IX063
IX064
230 V AC / 50 Hz 230 V AC / 50 Hz 230 V AC / 50 Hz 230 V AC / 50 Hz 230 V AC / 50 Hz 12 V 12 V 12 V 12 V 12 V 150 W 300 W 500 W 60 W 140 W 300 W 600 W 1000 W 75 W 175 W Short-circuit, over load, over temperature, over voltage and low voltage (shutdowns) battery reverse polarity (fuse protected) 157x104x63mm 200x104x63mm 241x104x63mm 49x74x122mm 49x74x122mm 0.65 kg 0.79 kg 1.2 kg 0.175 kg 0.175 kg
G e n o i s Ra n g e Modified sine wave inverters for leisure applications. The inverter automatically shuts down if the loads exceed its nominal power or if its temperature rises above 55°C. An alarm will sound if the battery voltage drops too low (< 10.5 V).
12 V models
IN009 (1-2)
IN001 (1-2)
IN003 (2)
IN007
IN013
IN016
24 V models
IN012 (1)
IN002 (1)
IN004
IN008
IN022
IN017
48 V models Continuous power Output voltage Protection features Dimensions (LxWxH) Weight
IN024 (1) 150 W 230 V AC / 50 Hz 58x104x162mm 0.7 kg
IN025
300 W 300 W 600 W 600 W 1000 W 1500 W 230 V AC / 50 Hz 230 V AC / 50 Hz 230 V AC / 50 Hz 230 V AC / 50 Hz 230 V AC / 50 Hz 230 V AC / 50 Hz Over load, over temperature, over voltage and low voltage (shutdowns) battery reverse polarity (fuse protected) 58x91x190mm 232x104x58mm 73x205x290mm 290x205x73mm 80x242x393mm 430x240x77mm 1.1 kg 0.9 kg 2.1 kg 2.1 kg 3.2 kg 3.8 kg
2500 W 230 V AC / 50 Hz 455x240x90mm 5.8 kg
(1) Cigarette wire plug – (2) 5 V USB port on front panel.
161
P R O s i n e Ra n g e High quality true sine wave output inverter, dependable for 24h/24 operation. Designed for recreational and industrial applications. Efficient power saving mode: draws only 1.5 watts under no load condition. Models available with Schuko (SC) or hardwire with transfer switch (TS).
by
Inverters XANTRE
12/24 V DC – 230 V AC Pure Sine Wave Inverters
Reference DC input AC output Continuous power Surge capacity Weight Dim. (HxWxL) Type de sortie
IX112
IX113
IX122
IX123
12 V: 10-16 V 24 V: 20-32 V 230 V AC / 50 HZ 230 V AC / 50 HZ 1000 W 1000 W 1500 W 1500 W 7 kg 7 kg 7 kg 7 kg 115x280x390mm SC TS SC TS
IX212
IX213
IX222
IX223
12 V: 10-16 V 24 V: 20-32 V 230 V AC / 50 HZ 230 V AC / 50 HZ 1800 W 1800 W 2900 W 2900 W 7 kg 7 kg 7.5 kg 7.5 kg 115x280x390mm SC TS SC TS
SC : Schuko (front panel) / TS : hard wire w/transfer switch
Ref: TC015 Remote Control Kit This remote panel displays DC input voltage from the battery, DC input current (amps) drawn from the battery, power scale with inverter wattage output, and status/error display for shutdown conditions - overload, overtemperature, and over/under voltage. A 7.6m (25’) remote cable is included with the panel.
P R O w a t t S W Ra n g e Mid-range pure sine wave inverter.
The compact, easy-to-use and easy-to-install design of the PROwatt SW Series makes it ideal for use in commercial truck, RV and marine applications. With True Sine-Wave output, the PROwatt SW Series can provide power for all types of electrical loads including, variable speed power tools, advanced electrical appliances, microwaves and much more. The PROwatt SW provides household AC power anywhere. Protection Features Low voltage shutdown (10.5 V DC). Low voltage alarm (11.0 V DC). Over voltage protection (15.5 V DC). Overload shutdown. Over temperature shutdown.
Reference DC input AC output Continuous power Surge capacity Weight Dimensions
162
IX040
IX041
IX042
12 V: 10.5-15.5 V 230 V AC 50 Hz 700 W 1400 W 2.7 kg 310x185x90mm
12 V: 10.5-15.5 V 230 V AC 50 Hz 1400 W 2800 W 4.64 kg 369x240x115mm
12 V: 10.5-15.5 V 230 V AC 50 Hz 2000 W 4000 W 5.46 kg 418x240x115mm
ACCESSORIES The PROwatt SW remote (Ref: IX403) provides the convenience of a simple on/off remote function to the user. It also has an automatic ignition lockout feature to shutdown the inverter’s output when the vehicle’s ignition is not engaged. A 7.6m (25’) remote cable is included with the panel.
12/24 V DC – 230 V AC Pure Sine Wave Inverters Specifically designed for heavy duty applications and loads sensitive to voltage fluctuations (230 V ± 3% - 50 Hz ± 0.05%).
Energy
Protection Features Low voltage, over voltage, overload shutdown, over temperature, reverse polarity, short-circuits. Comes in with indicator lights and NF sockets.
A
B
OPTIONS A Ref: IC600 Remote Switch Panel B Ref: IC149 12 V Remote Control Panel B Ref: IC148 24 V Remote Control Panel
Reference Nominal voltage Nominal output Max output @ 3 min. Surge capacity Transfer switch Remote switch (not included) Dimensions Weight
12 V models
IC301
IC302
12 V 300 W 400 W No ON/OFF 237x155x72mm 3.5 kg
24 V 300 W 400 W 400 W No ON/OFF 237x155x72mm 3.5 kg
IC601
IC604
IC101
IC104
IC151
IC157
IC212
24 V models
IC602
IC605
IC102
IC224
IC324
Nominal output Max output @ 3 min. Surge capacity Transfer switch
600 W 680 W 800 W No
600 W 680 W 800 W Yes
1000 W 1150 W 2000 W No
1000 W 1150 W 2000 W Yes
1500 W 1725 W 3000 W No
1500 W 1725 W 3000 W Yes
2000 W 2300 W 4000 W No
3000 W 3450 W 6000 W No
Remote switch (not included)
ON/OFF
IC600 (12/24 V)
IC600 (12/24 V) IC149 (12 V) IC148 (24 V)
IC600 IC149
IC600 (12/24 V) IC149 (12 V) IC148 (24 V)
IC600 IC149
IC600 (12/24 V) IC149 (12 V) IC148 (24 V)
IC600 (12/24 V) IC149 (12 V) IC148 (24 V)
295x180x72mm 2.7 kg
290x179x80mm 3.3 kg
383x182x89mm 4 kg
373x236x115mm 6.2 kg
415x191x88mm 4.8 kg
403x236x115mm 7 kg
422x208x166mm 9 kg
452x208x166mm 9.8 kg
Dimensions Weight
IC152
IC312
163
by
Energy Pack CLAYTO 164
12/24 V DC – 230 V AC 50 Hz Combined Charger/Inverters The G3 Combi is a combination of a pure sine wave inverter and an intelligent battery charger. The unit has a number of benefits thanks to its dual functionality. The Combi charges batteries, when it is connected to the fixed 230 V AC grid or an external power source.
Reference Inverter characteristics: Input voltage Output voltage Continuous power Power @ 15 min. Surge capacity (1 sec.) Charger characteristics: Charge current Input voltage General characteristics: Transfer switch Max. efficiency Temperature range (operation) Dimensions (LxWxH) mm Weight
KN027
KN025
12 V
12 V
1000 W 1200 W 2000 W
1300 W 1500 W 3000 W
0-50 A
0-80 A
When it is disconnected, the sine wave inverter part converts energy from the battery to 230 V AC. This function is particularly well-suited for emergency power (UPS).
KN012
KN028
12 V 24 V 230 V 50 Hz 2000 W 1000 W 2300 W 1200 W 4000 W 2000 W 0-100 A 0-30 A 185-265 V AC - 45-65 Hz
KN029
KN030
24 V
24 V
1500 W 1700 W 3000 W
2300 W 2500 W 4500 W
0-40 A
0-50 A
Built-in on all models 90% 100% output in full temperature scale : -20 to +50°C 299x198x116 376x198x116 299x198x116 7.5 kg 7.5 kg 9.5 kg 7.5 kg 7.5 kg
376x198x116 9.5 kg
12/24 V DC – 230 V AC 50 Hz Pure Sine Wave Inverters Pure Sine Wave Inverter. Can handle high surge power. Efficient power saving mode: < 5 mA. Vibration resistant. Reference Input voltage Output voltage Continuous power Power @ 15 min. Surge capacity (1 sec.) Max. efficiency Temperature range (operation) Dimensions (LxWxH) mm Weight
KN039
KN040
12 V
12 V
KN042
KN043
KN044
KN045
12 V 24 V 24 V 230 V 50 Hz 1000 W 1300 W 2000 W 1000 W 1500 W 1200 W 1500 W 2300 W 1200 W 1700 W 2000 W 3000 W 4000 W 2000 W 3000 W 90% 100% output in full temperature scale : -20 to +50°C 299x198x116 376x198x116 299x198x116 7.5 kg 9.5 kg 7.5 kg
24 V 2300 W 2500 W 4500 W
376x198x116 9.5 kg
12/24 V DC – 230 V AC 50 Hz Pure Sine Wave Inverters A J Ra n g e The AJ range consists of sine wave inverters that convert a battery's DC voltage into AC voltage, which can be used by all electrical appliances.
A
c
Energy
The sine wave inverters of the AJ series have been designed to meet industrial and domestic needs. They meet the highest requirements of comfort, safety and reliability. Any device designed for the public electrical network of 230 V 50 Hz can be connected to them (up to the nominal power of the inverter). Typical applications: High and steady efficiency. Outstanding overload capabilities. Digital regulation and control by microprocessor. Electrical supply to any type of appliance. Full internal protection. Stand-by level adjustable from a very low threshold (from IJ401 and above). D Battery lifetime optimization (B.L.O.) function.
B
Ref: IN020 Remote Control for IJ801, IJ021, IJ802, IJ022. Solar regulation available as an option. Reference Continuous power Power (30 min.) Power (5sec.) Input voltage Output voltage Low battery voltage shutdown Protection features Dimensions Weight
A
A
A
B
B
B
C
C
D
D
IJ201
IJ252
IJ254
IJ401
IJ402
IJ454
IJ801
IJ802
IJ021
IJ022
200 W 275 W 450 W 10.5-16 V
300 W 350 W 650 W 21-32 V 230 VAC 50 Hz 21 V IP30 163x142x84mm 2.6 kg
300 W 400 W 1000 W 42-64 V
400 W 500 W 1000 W 10.5-16 V
500 W 700 W 1400 W 42-64 V
42 V IP30
10.5 V IP30
2.6 kg
4.5 kg
500 W 600 W 1200 W 21-32 V 230 VAC 50 Hz 21 V IP30 240x142x84mm 4.5 kg
10.5 V IP30 2.4 kg
42 V IP30 4.5 kg
800 W 1000 W 1000 W 1300 W 2200 W 2800 W 10.5-16 V 21-32 V 230 VAC 50 Hz 10.5 V 21 V IP30 IP30 428x142x84mm 8.5 kg 8.5 kg
2000 W 2000 W 2100 W 2400 W 5000 W 5200 W 10.5-16 V 21-32 V 230 VAC 50 Hz 10.5 V 21 V IP20 IP20 399x273x117mm 19 kg 18 kg
S I Ra n g e Can withstand overloads up to 3.5 x nominal power. Connector for remote ON/OFF switch. Typical applications: heavy loads and asymmetric loads, up to 2 x nominal power. Please contact us if your application requirements exceed the nominal power of the models below.
Reference
IS121
Continuous power 1200 W Surge capacity 4200 W Input voltage 11.4-16 V Output voltage 230 V AC 50 Hz Low battery voltage shutdown 11 V Dimensions 391x124x215mm Weight 13.2 kg
IS122
IS162
IS232
IS332
1200 W 4200 W 22.8-32 V 230 V AC 50 Hz 22 V 391x124x215mm 13.2 kg
1600 W 5600 W 22.8-32 V 230 V AC 50 Hz 22 V 391x124x215mm 15.2 kg
2300 W 8000 W 22.8-32 V 230 V AC 50 Hz 22 V 591x124x215mm 27 kg
3300 W 11000 W 22.8-32 V 230 V AC 50 Hz 22 V 636x124x215mm 30 kg
165
12/24 V DC – 230 V AC 50 Hz Pure Sine Wave Charger/Inverters X P C o m p a c t Ra n g e
Energy
C o m p a c t Ra n g e
A
C
B
The Compact series models consist of 3 fully automatic functions: a sine wave inverter, a battery charger and a transfer system. True sine wave voltage. Suitable for any kind of electrical appliance. Reliable and silent working with all kind of loads. Outstanding overload capabilities. Stand-by level adjustable over a large range and from a very low threshold. 4 STEP battery charger with PFC. Ultra-fast transfer relay. High efficiency. Full internal protection. Ultra-fast regulation. Microprocessor controlled.
OPTIONS C Ref: IC001 The RCC-01 Remote Control allows the user to consult, control and program* the system remotely. A LED display offers a comprehensive view of the batteries charging state and of the output current (or transfer mode input). Supplied with a 20m cable. *Remote control required for the XPC programming.
Ref: IC903 Temperature sensor (°C). This sensor adapts charge levels to the battery's temperature variations. Supplied with a 3m cable. On request, XP Compact and Compact can be supplied with a built-in solar regulator.
Reference Continuous power Surge capacity Input voltage Output voltage Adjustable charge current Transfer switch Dimensions Weight
166
A
XP COMPACT
B
COMPACT
IC111
IC162
IC131
IC232
1100 W
1600 W
1300 W
2300 W
19 to 32 V
9.5 to 16 V
3 x nominal power 9.5 to 16 V
3 x nominal power
230 V AC 50 Hz 0 to 45 A 16 A
0 to 37 A 16 A
0 to 55 A 16 A
12.6 kg
16 kg
410x124x215mm 11.7 kg
19 to 32 V 230 V AC 50 Hz 0 to 55 A 16 A 480x124x215mm 17.1 kg
12/24 V DC – 230 V AC 50 Hz Pure Sine Wave Charger/Inverters X t e n d e r Ra n g e The Xtender series provides an unmatched freedom of use due to its many functions. In a basic application, it offers a total package: the functions of inverter, battery charger, transfer system and assistance to the source. These functions can be combined and controlled in a totally automatic way for exceptional ease and optimal management of available energy. Energy
Its programmable auxiliary contacts also permit interconnection with existing systems or the implementation of extended functions. Fully programmable by means of its remote control, it enables the software update; thus making it an upgradeable product to which new functions may be added further on. Through the implementation of several units, it is possible to create a 3-phase source or to set them in parallel, in order to increase the power available. Up to 9 Xtender series inverters can then be combined together.
Xtender XTS • True sine wave voltage. • Reliable and silent with any kind of load. • Outstanding overload capabilities. • Smart-Boost function for assistance to the source even with difficult loads. • Automatic reduction of peak loads (power shaving). • Multi-stage programmable battery charger with PFC. • Stand-by level adjustable over a large range and from a very low threshold. • Ultra-fast transfer relay. • Control by digital signal processors (DSP). • High efficiency.
ACCESSORIES Ref: IC524 IP54 fan. Real-time communication kit. Auxiliary transfer module. Ref: IC508 Remote programming center (IC509 or IC510). Ref: IC905 Battery temperature sensor. Ref: IC904 Communication Cable for 3ph and Parallel Systems Reference Continuous power @ 25°C w/ - w/out fan 30 min. load @ 25°C w/ - w/out fan Smart-boost power Input voltage range Output voltage Adjustable charge current Transfer relay Dimensions Weight
IC521
IC522
IC523
650 - 500 VA 1000 - 750 VA 2300 VA 9.5 to 17 V
800 - 650 VA 1200 - 900 VA 2500 VA 19 to 34 V 230 V AC 50 Hz 0 to 20 A
900 - 700 VA 1400 - 1000 VA 2800 VA 38 to 68 V
110x210x310mm 9 kg
110x210x310mm 9.3 kg
0 to 35 A 16 A 110x210x310mm 8.2 kg
0 to 10 A
The BSP is an accurate battery energy measurement and real time processing system, based on a sophisticate algorithm, to determine in the most acute way, the state of the battery. The BSP is compatible with a 12, 24 or 48 V battery (auto-detected) and the whole Xtender family. The BSP allows to monitor and/or log many different energy storage information like: - State of charge. - Time to go / Time to charge. - Throughput energy. - Current and voltage. - Battery temperature. It interacts with the Xtender: - To drive the behavior of the Xtender’s auxiliary relay (i.e. Generator start). - To control the charge/discharge limit. - To control the total charging / discharging current of the battery. Réf: IC525 With a 500A Shunt. Réf: IC526 With a 1200A Shunt
167
12/24 V DC – 230 V AC 50 Hz Pure Sine Wave Charger/Inverters X t e n d e r Ra n g e Fully programmable by means of its remote control, it enables the software update; thus making it an upgradeable product to which new functions may be added further on. Through the implementation of several units, it is possible to create a 3-phase source or to set them in parallel, in order to increase the power available. Up to 9 Xtender series inverters can then be combined together (up to 72 kW).
Energy
Xtender XTM – Xtender XTH
• True sine wave voltage. • Reliable and silent with any kind of load. • Outstanding overload capabilities. • Smart-Boost function for assistance to the source even with difficult loads. • Automatic reduction of peak loads (power shaving). • Multi-stage programmable battery charger with PFC. • Stand-by level adjustable over a large range and from a very low threshold. • Ultra-fast transfer relay. • Control by digital signal processors (DSP). • High efficiency.
A
B
Generator or Grid
Generator or Grid
Inverter
Chargeur
Xtender
Xtender
Xtender
Battery
Battery
Battery
Charge
Ref: IC510 Remote Control, surface mounting
Ref: IC509 Remote Control, recess mounting A
Reference Continuous power Smart-boost power Surge capacity Input voltage range Output voltage Adjustable charge current Transfer relay Dimensions Weight
168
IC518 IC515 1500 VA 2000 VA 1500 VA 2000 VA 3400 VA 4800 VA 9.5 to 17 V 0 to 70 A 50 A
0 to 100 A 50 A
15 kg
18.5 kg
Xtender XTM
IC519 2000 VA 2400 VA 6000 VA
IC516 IC520 3000 VA 2000 VA 3500 VA 2600 VA 9000 VA 6500 VA 19 to 34 V 230 V AC 50 Hz 0 to 55 A 0 to 90 A 0 to 30 A 50 A 50 A 50 A 133x322x466mm 16.2 kg 21.2 kg 16.2 kg
B
IC517 3500 VA 4000 VA 10500 VA
IC511 2500 VA 3000 VA 7500 VA 9.5 to 17 V
0 to 50 A 50 A
0 to 160 A 50 A
22.9 kg
34 kg
Xtender XTH
IC512 IC513 IC514 4500 VA 5000 VA 7000 VA 5000 VA 6000 VA 8000 VA 12000 VA 15000 VA 21000 VA 19 to 34 V 38 to 68 V 230 V AC 50 Hz 0 to 140 A 0 to 100A 0 to 120 A 50 A 50 A 50 A 230x300x500mm 40 kg 42 kg 46 kg
Single-Phase Generator Sets – 3000 rpm – 230 V 50 Hz Mase Generators offers an extensive worldwide service network.
by
• Powered by YANMAR or KUBOTA diesel engines. • Wet exhaust for quieter operation. • Synchronous alternator (without brushes). Insulation class: H. • Automatic shutdown on: low oil pressure, high water engine temperature, high exhaust gas temperature. • Control panel. • Running hour meter to help you perform scheduled maintenance. • Easy access for maintenance, all service parts on the same side. 120 V 60 Hz and isolated ground units available on request.
617 692
548
561
527
462 645
527
728
IS6.1 Open version
462
IS9.1 Open version
Remote Control Panel 90x135mm, supplied with a 10m cable.
ACCESSORIES Service Kit: zinc anodes, thermal switches, fuses, belts, impellers, filters (oil, fuel, air), capacitors, start relay, oil pressure switch. Installation Kit: air vent w/valve, waterlock, exhaust hose w/ outlet, goose neck, nickelplated bronze water strainer, hose barb fittings, seacock, stainless steel hose clamps.
Ref. GS266 GS035 GS050 GS601 GS601 GS091 GS093
Model
Max. power
Nominal power
Engine
Noise level @ 7m
Dimensions LxWxH
Weight
Exhaust OD connection
Service Kit
Installation Kit
IS2.6 IS3.5 IS5.0 IS6.1 IS6.1 open IS9.1 IS9.1 open
2 kW 3 kW 5 kW 6.1 kW 6.1 kW 8.6 kW 8.6 kW
1.7 kW 2.7 kW 4 kW 5.6 kW 5.6 kW 7.8 kW 7.8 kW
YANMAR 1 cyl. 4.2 HP YANMAR 1 cyl. 6.1 HP YANMAR 1 cyl. 8.8 HP KUBOTA 2 cyl. 11.1 HP KUBOTA 2 cyl. 11.1 HP KUBOTA 3 cyl. 16.6 HP KUBOTA 3 cyl. 16.6 HP
54 dB (A) 54 dB (A) 54 dB (A) 54 dB (A) 60 dB (A) 54 dB (A) 60 dB (A)
500x380x465mm 590x406x515mm 675x468x565mm 650x468x555mm 645x527x561mm 730x468x555mm 728x527x548mm
80 kg 96 kg 130 kg 165 kg 155 kg 185 kg 180 kg
45mm 45mm 45mm 50mm 50mm 50mm 50mm
GS700 GS701 GS702 GS703 GS703 GS713 GS713
GS500 GS500 GS500 GS510 GS510 GS510 GS510
Hose diameter: diesel: 8mm, water: 16mm.
169
M a r i n e r Ra n g e Wet exhaust marine generators with sea water / fresh water exchangers.
by
Generators MAS
Single-Phase Generator Sets – 1500 rpm – 230 V 50 Hz
Model
Max. power
Nominal power
Engine
Noise level @ 7m
Dimensions LxWxH
Weight
MARINER 700 MARINER 900 MARINER 1200 MARINER 1310 TURBO MARINER 1600 MARINER 1800 MARINER 2010 TURBO MARINER 2100 MARINER 2400 MARINER 2700
6.7 kW 9 kW 11.2 kW 13.1 kW 15.3 kW 20 kW 20.1 kW 23 kW 26 kW 29 kW
6.2 kW 8.2 kW 10.2 kW 12.3 kW 13.9 kW 18 kW 18.7 kW 21 kW 24 kW 27 kW
YANMAR 3 cyl. 12.5 HP YANMAR 3 cyl. 15.4 HP YANMAR 3 cyl. 18.4 HP YANMAR 3 cyl. 19.1 HP YANMAR 4 cyl. 24.5 HP YANMAR 4 cyl. 47 HP YANMAR 4 cyl. 29.3 HP YANMAR 4 cyl. 47 HP YANMAR 4 cyl. 47 HP YANMAR 4 cyl. 47 HP
51 dB (A) 51 dB (A) 52 dB (A) 52 dB (A) 52 dB (A) 54 dB (A) 54 dB (A) 54 dB (A) 54 dB (A) 56 dB (A)
868x540x618mm 821x581x656mm 1040x631x694mm 1040x631x694mm 1135x631x694mm 1295x630x810mm 1295x630x810mm 1295x630x810mm 1295x630x810mm 1295x630x810mm
230 kg 295 kg 344 kg 465 kg 400 kg 625 kg 465 kg 625 kg 625 kg 625 kg
Ref. GS800 GS801 GS860 GS861 GS862 GS863 GS864 GS865 GS866 GS867
Exhaust OD Service connection Kit 50mm 50mm 50mm 50mm 50mm 75mm 75mm 75mm 75mm 75mm
GS707 GS707 GS708 GS710 GS711 GS711 GS711 GS711 -
Installation Kit GS510 GS510 GS513 GS513 GS515 GS515 GS515 GS515 GS515 GS515
Hose diameter: diesel: 8mm, water: 16mm.
IS & MARINER ACCESSORIES
B
Remote ON/OFF switch - 138x95mm + 20m cable Ref: GS003 A GS920 Remote control panel - 150x150mm – Oil pressure gauge – Water temperature gauge (°C) + 20m cable Ref: GS920 B
a
Service Kit: zinc anodes, thermal switches, fuses, belts, impellers, filters (oil, fuel, air), capacitors, start relay, oil pressure switch. Installation Kit: air vent w/valve, waterlock, exhaust hose w/ outlet, goose neck, nickel-plated bronze water strainer, hose barb fittings, seacock, stainless steel hose clamps.
I S Ra n g e • Built-in INTERCOOLER system: the air inside the noise shield is cooled by sea water, through an air/water exchanger. This system allows for optimal performances whatever the ambient temperature. • Engine, power generator and noise shield mounted on a double vibration dampening system.
Ref.
Model
Max. power
Nominal power
Engine
Noise level @ 7m
Dimensions LxWxH
Weight
Exhaust OD connection
Service Kit
Installation Kit
GS770 GS090 GS120 GS131 GS160 GS180 GS201 -
IS7.0 IS9 IS12 IS13.1 IS16 IS18 IS20.1 IS24 IS27 IS35
6.7 kW 9 kW 11.2 kW 13.1 kW 15.3 kW 20 kW 20.1 kW 26 kW 29 kW 35 kW
6.2 kW 8.2 kW 10.2 kW 12.6 kW 13.9 kW 18 kW 18.7 kW 24 kW 27 kW 32.5 kW
YANMAR 3 cyl. 12.5 HP YANMAR 3 cyl. 15.4 HP YANMAR 3 cyl. 18.4 HP YANMAR 3 cyl. 19.1 HP YANMAR 4 cyl. 24.5 HP YANMAR 4 cyl. 47 HP YANMAR 4 cyl. 29.3 HP YANMAR 4 cyl. 47 HP YANMAR 4 cyl. 47 HP JOHN DEERE 4 cyl. 54 HP
49 dB (A) 49 dB (A) 50 dB (A) 50 dB (A) 52 dB (A) 54 dB (A) 50 dB (A) 54 dB (A) 54 dB (A) 54 dB (A)
760x530x625mm 837x568x688mm 985x585x730mm 985x585x730mm 1115x585x730mm 1125x630x830mm 1115x585x730mm 1125x630x830mm 1125x630x830mm 1820x800x985mm
230 kg 295 kg 344 kg 390 kg 400 kg 625 kg 465 kg 625 kg 625 kg 900 kg
50mm 50mm 50mm 50mm 50mm 75mm 75mm 75mm 75mm 75mm
GS707 GS707 GS708 GS709 GS710 GS711 GS711 -
GS510 GS510 GS513 GS515 GS513 GS515 GS515 GS515 GS515 GS515
Hose diameter: diesel: 8mm, water: 16mm.
170
Three-Phase Generator Sets – 1500 rpm – 400 V 50 Hz M a r i n e r Ra n g e
by
Wet exhaust marine generators with sea water / fresh water exchangers.
Ref. GS870 GS871 -
Model
Max. power
Nominal power
Engine
Noise level @ 7m
Dimensions LxWxH
Weight
Exhaust OD connection
Service Kit
Installation Kit
MARINER 1150T MARINER 1450T MARINER 2000T MARINER 2500T MARINER 3000T MARINER 3400T
11.2 kVA 14.1 kVA 19.2 kVA 28 kVA 31 kVA 36.2 kVA
10.2 kVA 12.7 kVA 17.4 kVA 25 kVA 28 kVA 33.7 kVA
YANMAR 3 cyl. 15.4 HP YANMAR 3 cyl. 18.4 HP YANMAR 4 cyl. 24.1 HP YANMAR 4 cyl. 47 HP YANMAR 4 cyl. 47 HP YANMAR 4 cyl. 47 HP
51 dB 52 dB 52 dB 56 dB 56 dB 56 dB
1295x630x810mm 1040x631x694mm 1135x631x694mm 1295x630x810mm 1295x630x810mm 1296x630x810mm
295 kg 344 kg 400 kg 625 kg 625 kg 626 kg
50mm 50mm 50mm 75mm 75mm 75mm
GS707 GS708 GS710 GS711 -
GS513 GS513 GS513 GS515 GS515 GS515
Hose diameter: diesel: 8mm, water: 16mm.
IS & MARINER ACCESSORIES A Ref: GS003 Remote ON/OFF switch - 138x95mm + 20m cable
B
a
B Ref: GS920 Remote control panel - 150x150mm – Oil pressure gauge – Water temperature gauge (°C) + 20m cable Service Kit: zinc anodes, thermal switches, fuses, belts, impellers, filters (oil, fuel, air), capacitors, start relay, oil pressure switch. Installation Kit: air vent w/valve, waterlock, exhaust hose w/ outlet, goose neck, nickel-plated bronze water strainer, hose barb fittings, seacock, stainless steel hose clamps.
I S Ra n g e • Built-in INTERCOOLER system: the air inside the noise shield is cooled by sea water, through an air/water exchanger. This system allows for optimal performances whatever the ambient temperature. • Engine, power generator and noise shield mounted on a double vibration dampening system.
Ref. IS11.5T IS14.5T IS20T IS25T IS30T IS34T
Max. power
Nominal power
Engine
Noise level @ 7m
Dimensions LxWxH
Weight
Exhaust OD connection
Service Kit
Installation Kit
11.2 kVA 14.1 kVA 19.15 kVA 28 kVA 31 kVA 36.2 kVA
10.2 kVA 12.7 kVA 17.4 kVA 25 kVA 28 kVA 33.7 kVA
YANMAR 4 cyl. 15.4 HP YANMAR 3 cyl. 18.1 HP YANMAR 4 cyl. 24.5 HP YANMAR 4 cyl. 47 HP YANMAR 4 cyl. 47 HP YANMAR 4 cyl. 47 HP
49 dB (A) 50 dB (A) 50 dB (A) 56 dB (A) 56 dB (A) 56 dB (A)
837x568x688mm 985x585x730mm 1115x585x730mm 1225x630x830mm 1225x630x830mm 1225x630x830mm
295 kg 344 kg 400 kg 625 kg 625 kg 625 kg
50mm 50mm 50mm 75mm 75mm 75mm
GS707 GS708 GS710 GS711 GS711 -
GS513 GS513 GS513 GS515 GS515 GS515
Ø gasoil : 8mm / Ø eau : 16mm
Generator Sets – 1500 rpm – Canal and River Boating Applications Three-phase 400 V 50 Hz, single-phase 230 V 50 Hz. Dry exhaust air-cooled generators. Built-in 40L diesel tank and battery, 230 V and 400 V sockets, control panel with emergency stop push-button. Option: pump allowing direct feeding from the propulsion engine fuel tank.
Ref.
Max. power
Nominal power
Engine
Autonomy
Noise level @ 7m
Dimensions LxWxH
Weight
MPF16 BA MPF22 BA MPF33 BA MPF44 BA
16 kVA 22 kVA 33 kVA 44 kVA
15 kVA 20 kVA 30 kVA 40 kVA
YANMAR 3 cyl. 18.4 HP YANMAR 4 cyl. 24.5 HP OFUTZ 4 cyl. 41.2 HP OFUTZ 4 cyl. 54.7 HP
16h @ 3/4 of charge 12h @ 3/4 of charge 7.5h @ 3/4 of charge 5h @ 3/4 of charge
71 dB (A) 71 dB (A) 72 dB (A) 72 dB (A)
1430x690x930mm 1430x690x930mm 1640x785x1060mm 1720x785x1060mm
470 kg 480 kg 830 kg 900 kg
171
Accessories for Generator Sets
Energy
Fu e l K i t
x10 Pa
Diesel Delivery Hose, ISO 7840 A1 Ref: TU008 8mm ID
ck Quantity
Fuel Filter Max flow: 57 L/h. Plastic bowl. Ref: RA120 120 A
Hose Barb Fitting Ref: RH001 90° Elbow - 8mm hose
Worm-Drive Clamps – W5 Stainless Steel AISI 316, solid band. Ref: CS017 10-16mm, 9mm band
Water Strainers Nickel Plated Body. 316L Stainless Steel Filter and Bolts. Ref: FL012 1/2” – Bronze Ref: FL034 3/4” – Bronze Ref: FL520 3/4 – Brass
2-Way Ball Valves Ref: V012 1/2” Ref: V034 3/4”
Male Nipples Ref: ML012 1/2” Ref: ML034 3/4”
S e a Wa t e r K i t
Brass Skin Fittings Ref: PG012 1/2” Ref: PG034 3/4”
x10 Male Hose Barb Fittings Ref: RS012 1/2”, 15mm ID hose Ref: RS035 3/4”, 25mm ID hose
High Resistance Hose Ref: TA016 16mm ID, 22.4mm OD Ref: TA020 20mm ID, 26.8mm OD Ref: TA025 25mm ID, 33mm OD
Worm-Drive Clamps – W5 Stainless Steel AISI 316, solid band. Ref: CS028 16-25mm, 12mm band
Pa
ck Quantity
Exhaust Kit
Waterlocks Dim. (WxLxH): 372 x 110 x 221mm. Capacity: 4.25 L. Ref: EC745 45mm ID hose Ref: EC750 50mm ID hose (short exhaust line) Ref: EC775 75mm ID hose
Goose Necks Ref: EC245 45mm ID hose, inlet/outlet Ref: EC250 50mm ID hose, inlet/outlet Ref: EC275 75mm ID hose, inlet/outlet
T-Bolt Clamps – W4 Stainless Steel AISI 304, with solid rolled edge band and self-locking screw. Ref: CI001 48-51mm, 22mm band Ref: CI007 74-79mm, 24mm band
172
Vernalift Muffler Ref: SV017 3” inlet/outlet
Rubber Exhaust Outlets w/ Stainless Steel Mounting Ring Ref: EC345 45mm ID, cutout dia.: 58mm Ref: EC351 51mm ID, cutout dia.: 63mm Ref: EC376 76/90mm ID, cutout dia.: 111mm
GEN SEP Water/Gas Separators 2’’ or 3’’ inlet/outlet.
Wet Exhaust Hose Lloyd’s Register Type Approved. Ref: TE045 45mm ID Ref: TE051 51mm ID Ref: TE076 76mm ID
Accessories for Generator Sets A i r Ve n t K i t
x10
Suitable for 13mm, 19mm, 25mm and 32mm ID hose Prevent cooling water from being siphoned into the engine when it is stopped, if cooling water intake is near or below the waterline. Ref: EC201 Air Vent without Valve Vented anti-siphon supplied with skin fitting, 4m hose and hose clamps. Ref: EC202 Air Vent with Built-in Valve
High Resistance Hose Ref: TA016 16mm ID, 22.4mm
Electricity Kit
ck Quantity
Energy
Pa
Worm-Drive Clamps – W5 Stainless Steel AISI 316, solid band. Ref: CS028 16-25mm, 12mm band
x25 Pa
12 V Starting Batteries BANNER PowerBull Range Lead / Calcium Maintenance-Free Technology. “Double Top” patent for double leak protection, allows mounting at angles up to 45°. Optimal starting performance under any weather condition. Ref: BA044 12 V 44 A.h 420 A Ref: BA074 12 V 74 A.h 700 A Ref: BA088 12 V 88 A.h 680 A
Battery Holders Ref: K171 Large model Internal dim.: 390x180x240mm. Ref: K170 Small model Internal dim.: 280x190x200mm
ck Quantity
Battery Cables Single Core Cables Select wire size according to the distance between the battery and the generator. 25mm2 up to 5m and 35mm2 above 5m. Ref: KA251 25mm2, Red Ref: KA250 25mm2, Black Ref: KA351 35mm2, Red Ref: KA350 35mm2, Black Multi Core Cables, HO7NRF, Black Ref: KA350 4mm2, three-core cable
1,2m Pa
Battery Disconnecting Switches Ref: E021 Single Pole Ref: E191 Double Pole
Twin Input AC Selector Shore-Off-Genset. LED indicators. Dim.: 115x 127mm. Ref: AD370 230 V AC - 20A
Differential Circuit Breakers Single pole + Neutral - 30 mA. Ref: DD015 16A Ref: DD032 32A C curve. Max interrupting capacity: 10 kA. DIN rail mounting to EN 50-022. Flexible wire: max 16mm2. Rigid wire: max 25mm2.
Twin Input AC Selector Shore-Off-Genset. Panel dim.: 48x48mm. Ref: MK162 10A Ref: MK322 25A
Circuit Breaker Enclosures Ref: DD003 4 CB Dim. : 190x112x106mm Ref: DD004 8 CB Dim. : 190x184x106mm IP55 rating, supplied w/ cable glands and DIN mounting rails to EN 50-022.
ck Quantity
SER-3 Heat Shrinkable Tubing Ref: TH123 Red, 12mm ID
Automatic AC Selector Shore/Genset Ref: GS002 For IS2.6, IS3.5, IS5.0 Ref: GS005 For IS6.1, IS9.1 Ref: GS004 Casing
173
High Output Alternators High Output Alternators. Clockwise rotation. Built-in regulator. Double sealed bearings: lubricated for life. Die cast aluminum front & rear housings. Isolated ground.
Energy
Ref: AL028 12 V 160 A Dim.: L236xW173xH248mm, cut-in speed: 1000 rpm, excitation type: self-excited. Ref: AL029 24 V 75 A Dim.: L236xW173xH248mm, cut-in speed: 1000 rpm, excitation type: self-excited. Adjustable voltage regulator (28 V ± 0.2 V). Ref: AL030 24 V 100 A Dim.: L250xW177xH241mm, cut-in speed: 1200 rpm, excitation type: ignition. Ref: AL033 24 V 150 A Dim.: L250xW177xH241mm, cut-in speed: 1200 rpm, excitation type: ignition. Ref: AL031 24 V 175 A Dim.: L250xW177xH241mm, cut-in speed: 2000 rpm, excitation type: ignition.
ACCESSORIES Bi-directional Cooling Fan for AL029 Ref: AL780 Bi-directional Cooling Fan for AL030-031-033 Ref: AL797 2-groove Pulleys for SPA section 13mm V-belts: Nominal diameter: 75mm Ref: AL500 Nominal diameter: 92mm Ref: AL501
Medium Output Alternators Self-excited alternators with built-in regulator. Long life copper graphite brushes. Isolated ground. Self-lubricated bearings. Bracket angle: -30° / 0° / 30°.
Ref: AL020 12 V 90 A 5/8’’ dia. shaft, without pulley, bi-directional cooling fan, see figure B. Ref: AL021 12 V 90 A 17mm dia. shaft, without pulley, bi-directional cooling fan, see figure A. Ref: AL022 12 V 105 A 5/8” dia. shaft, without pulley, bi-directional cooling fan, see figure B.
ACCESSORIES 2-groove Pulley, nominal diameter 75mm, for AL020 and AL022 Ref: PA009
Figure A
Wide choice of 12 V and 24 V alternators, from 37 A to 105 A. We can help you find the model best suited to your application. Figure B
174
Alternators
Energy
A Réf: AL007 Prestolite 12 V 90 A (66021535) Complete with single 1/2” SPA section 80mm diameter pulley. Bi-directional rotation, isolated ground, filter, see figure MC. A Ref: AL008 Prestolite 24 V 60 A (66021532) Complete with single 1/2” SPA section 80mm diameter pulley. Bi-directional rotation, isolated ground, filter, see figure MC. B Ref: AL009 Prestolite 12 V 90 A. Complete with a single 3/8’’ section 65mm diameter pulley. Bi-directional rotation, isolated ground. C Ref: AL036 Prestolite 12 V 70 A (66021151M) Complete with a single 3/8’’ section 60mm diameter pulley. Bi-directional rotation, isolated ground, see figure MB.
A
B
C
MB
MC
AL009
We can help you find the model best suited to your application.
24 V DC Booster / Regulator for alternators An alternator is designed only to charge a starting battery so that it can dump high cranking current to start the engine. House battery banks require a 3-stage charging system to ensure the batteries receive a full charge. Designed to continually monitor battery voltage and automatically optimize charging, the booster / regulator lets you choose from a variety of selectable preset programs to best suit your charging needs. Its Universal Factory Program allows you to connect the MC-624 to your alternator right out of the box. Six additional preset programs support most popular battery types, including standard and deep-cycle flooded batteries, AGM, gel, and Optima (spiral wound) technologies. An easyto-use magnetic reed switch delivers quick, precise regulator adjustment. Should your charging system require individualized adjustment, the MC-624 provides additional user-defined programming options.
When used with optional alternator and battery temperature sensors, the MC-624 automatically monitors ambient temperatures and compensates for over-temperature conditions by reducing field output. Alarm outputs connect to audible or visual alarms to warn of dangerous system conditions. The installation manual includes instructions for the replacement of the regulator on the alternator.
Ref: PA021 BALMAR Booster / Regulator MC-624-H
ACCESSORIES Ref: PA026 Battery Temperature Sensor for PA021
175
Windchargers Rutland 913
Energy
Generates up to 200 Watts. Low wind speed start up of just 5 knots. Produces 90 Watts @ 19 knots and 24 Watts @ 10 knots. Anti-rust coating, stainless steel pole and fasteners. Turbine diameter: 910mm. Weight: 10.5 kg.
Charge into 12 V battery (A)
Charge into 24 V battery (A)
12V Kit: 12 V Rutland 913 + RT203 Charge Regulator 24 V Kit: 24 V Rutland 913 + RT203 Charge Regulator 12V Rutland 913 only 24V Rutland 913 only
Wind speed (knots)
Rutland 504
Ref: RT115 Ref: RT116 Ref: RT913 Ref: RT914
ACCESSORIES Rutland 913 Marine Mounting Kit Ref: RT002 2 x 1.20m polished stainless steel tubes, deck mounting brackets, guy rope fasteners, tube connector. Weight: 5 kg. Outside diameter: 45mm. Extension Tube for Rutland 913 Ref: RT003 Polished stainless steel. Length: 60cm – Outside diameter: 45mm.
Generates up to 60 Watts. Low wind speed start up of just 5 knots. Produces 25 Watts @ 19 knots. Anti-rust coating, stainless steel pole and fasteners. Turbine diameter: 510mm. Weight: 5 kg. The Rutland 504 features new aerodynamic styling: a sharper nose dome to improve the flow of wind to the turbine, a longer tail fin to improve the orientation of the turbine to wind and maintain stability. Higher grade body and nose material with improved UV stability and durability.
Charge into 12 V battery (A)
12 V Rutland 504 + RT060 Charge Regulator Ref: RT504 12 V Rutland 504 only Ref: RT500
ACCESSORIES Wind speed (knots)
Rutland 504 Marine Mounting Kit Ref: RT001 2 x 1m polished stainless steel tubes, deck mounting brackets, guy rope fasteners, tube connector. Weight: 3.3 kg. Outside diameter: 38mm.
Regulators
Ref: RT203 HRSi Regulator For use with Rutland 913, and 503/504 with up to 160 W of solar panels. Led indicators show battery and charge status. Turbine / solar panel shutdown switch. Bulk & float stage charging for best performance. Built in blocking diode protects HRSi and windcharger from other charge sources to battery. Temperature compensation optimizes charging to all conditions. Automatic voltage recognition for use with 12 and 24 V systems. Dim.: 130x80x42mm. Weight: 0.185 kg.
176
Ref: RT203 HRS 503 Regulator For use with Rutland 503 / 504 only with up to 100 W of solar panels. Led indicators show battery and charge status. Built in blocking diode protects HRS and windcharger from other charge sources to battery. Dim.: 150x75x34mm. Weight: 0.120 kg.
Ref: RT203 HRDi Regulator For use with Rutland 913, and 503/504 with up to 160 W of solar panels. Digital versatile LCD displays both battery volts charge currents and much more. Charge splitter for 2 battery banks. Turbine/solar panel shutdown switch. Automatic detection for 12 or 24 V operation. Dim.: 193x127x40mm. Weight: 0.420 kg.
Framed Solar Panels
Ref. ES708 ES702 ES709 ES707 ES713 ES720
DC Voltage Max Power 12 V 12 V 12 V 12 V 12 V 24 V
Current @ max power
Dimensions
Type of cells Weight
0.58 A 1.18 A 2.93 A 4.50 A 6.18 A 5.00 A
430x255x22mm 524x325x35mm 1014x406x35mm 1196x554x35mm 1436x536x35mm 1580x808x35mm
Monocrystalline 1.26 kg Monocrystalline 2.35 kg Monocrystalline 6 kg Monocrystalline 8 kg Monocrystalline 11.3 kg Monocrystalline 15 kg
10 W 20 W 50 W 80 W 110 W 185 W
Energy
Anodized aluminum frame. Square encapsulated solar cells protected by a high transmission tampered glass. Connection box rated IP65. Bypass diodes.
Flexible Solar Panels - Up to 22.5 % conversion efficiency for each cell. - Back contact technology (wiring of the cells at the rear side): increases the light capturing surface to maximize conversion efficiency. - Complete water tightness thanks to a multilayer design, for the most demanding marine environments. - 25 % flexibility. - 8 times lighter than traditional glass modules.
Ref. SN200 SN201 SN202
Voltage @ max power
Max power
Current @ max power
Dimensions
Weight
18.4 V 9.20 V 9.20 V
100 W 50 W 50 W
5.51 A 5.51 A 5.51 A
1080x540x1.5mm 1080x285x1.5mm 565x540x1.5mm
1.46 kg 0.77 kg 0.77 kg
For optimum performances of the SOLBIANFLEX modules, we recommend the use of a MPTT (Maximum Power Point Tracking) regulator.
Semi-flexible Solar Panels Polycrystalline cells. Robustly constructed with fibreglass base and Tedlar™ cover. Sealed junction box houses blocking diode. 3m integral cable supplied. Designed to be gently curved to follow a coach roof. Can be walked on with deck shoes. Can be fixed using the 4 screw holes or adhesive.
Ref. ES400 ES401 ES402
Voltage
Max power
Current @ max power
Dimensions
Weight
12 V 12 V 12 V
5W 10 W 19 W
320 mA 640 mA 1.26 A
304x254x3mm 508x256x3mm 559x381x3mm
0.68 kg 1.30 kg 1.44 kg
Flexible Solar Panels Flexible amorphous silicon technology which is highly responsive to low light levels. Deploys conveniently on board on the curved surface of a boom or flat on a roof. Durable construction. Built-in diode and 3m cable.
Ref. ES407
Voltage
Max power
Current @ max power
Dimensions
Weight
12 V
32 Wc
1.94 A
1429x424x5mm
2.4 kg
177
Energy
Solar Charge Controllers
STECA PR Series 12/24V Controllers Graphical LCD display for operating parameters, fault messages, self test. Automatic electronic fuse. PWM control. Dimensions: 187x96x44mm. Weight: 350 g. Ref: ES327 10 A - Ref: ES328 15 A - Ref: ES329 20 A - Ref: ES330 30 A Models up to 70 A, please contact us.
STECA Solsum F Series 12/24 V Controllers LED user interface makes it easy to check battery state of charge. Automatic electronic fuse. PWM control. Dimensions: 145x98x24mm. Weight: approx. 150 g. Ref: ES303 6 A - Ref: ES301 8 A - Ref: ES309 10 A
MPPT Solar Charge Controllers S t e c a Ra n g e The advanced Maximum Power Point-tracking algorithm assures that the maximum available power of the solar generator is charged to the batteries. LED user interface. PWM control. Ref.
ES364
System voltage Nominal power Max efficiency Open circuit voltage (solar panel) @ min operating temperature Voltage range (MPPT tracker) Max current (solar panel) Max output (loads) Dimensions Weight
12 V 250 W 97%
24 V 500 W 98%
17 V to 100 V
34 V to 100 V
15 V < Panel Voltage < 100 V
30 V < Panel Voltage < 100 V 18 A 10 A 187x153x68mm 900 g
B i t r o n Ra n g e For solar panels up to 100 W. This MPPT controller works by operating your solar panel at the voltage where it can produce the most power, resulting in increases of 10% up to 30% depending on your panel, battery state of charge, and lighting conditions. It also prevents overcharging by throttling back the panel power as your batteries reach full charge. LED user interface. Input voltage: 3-30 V. Output voltage: 12/24 V. Protection: IP68. Dimensions: 328x65x24mm. Weight: 450 g. Ref: SN300
178
