Transcript
RF Coax Connectors
BNC Connectors (50 ohm/75 ohm) Product Facts ■
Bayonet lock coupling for quick connect/disconnect
■
Various connectors available in 50 and 75 ohm versions
■
Fully intermateable with comparable BNC UG/U connectors
■
Full range of Hex Crimp and O Crimp Products for common coaxial cables.
■
Low VSWR
■
Single crimp connectors offer one crimping operation for fast application
■
Twist-on connectors require no special tooling for application to the cable
■
Field serviceable (Category A) connectors qualified to MIL-C-39012
■
Field replaceable (Category C) plugs with captivated center contact
■
Field replaceable plugs can be terminated with industry standard tooling
■
Tarnish resistant Nickel finish available
■
Choice of different dielectrics
■
Listed under the Component Program of Underwriters Laboratories Inc., File No. E81956 R
■
PC Board soldered connectors are recognized under the Component Program of Underwriters Laboratories Inc., File No. E81956
The Tyco Electronics BNC RF connector family with bayonet locking coupling provides highly reliable, quick connect/disconnect coaxial connections. Exclusive single and O crimp terminations allow positive insulation grip and require no soldering, providing terminations at a very low overall applied cost. Available in both 50 and 75 ohm versions, these con-
nectors feature numerous styles including cable plugs and jacks, adapters and printed circuit board connectors. In addition to a variety of crimp type terminations, connectors are furnished in field replaceable and twist-on styles. These connectors accept a wide range of coaxial cables and are intermateable with industry standard connectors designed to MIL-C39012 specifications.
Tyco Electronics can also supply low cost alternatives with an extensive commercial type product line. A lower cost consumer series product offers the capability to supply center contacts in strip form and allow for automated center contact crimp technology. All connectors are designed around the mil-specifications, but utilize low-cost materials, offering comparable mechanical and electrical performance.
108-12002 — BNC Commercial T Adapter 108-12095 — BNC Commercial 75 Ohm Connectors 108-12096 — BNC Commercial FeedThru and Bulkhead Adapters 108-12079 — BNC Commercial 50 Ohm Solder Jacks 108-12103 — BNC Commercial PCB Press Fit Jacks Application Specifications — 114-12001 — BNC Commercial PCB Jack Press Fit
Performance Specifications — Page 45 Material Specifications — Page 46 Tooling — Pages 266-268 Military Category — All MIL type O crimp connectors are Category B Type (Tyco Electronics Crimp Tooling), unless otherwise noted. Packaging — All MIL Type connectors are packaged individually, all O crimp connectors are bulk packaged and all Hex crimp connectors are individually packaged unless otherwise noted.
R
■
Certified by Canadian Standards Association File No. LR 7189
R
Between Series Adapters For BNC Between Series Adapters, see pages 251-260.
Related Product Data Product Specifications — 108-1275 — BNC Ohm Terminators 108-12020 — BNC O Crimp Connectors 108-12044 — BNC Commercial Hex Crimp 108-12047 — BNC Commercial and Hex Crimp Connectors 108-12074 — BNC Solder Jacks 108-12075 — BNC Connectors (Category A) 108-12078 — BNC Commercial PCB Panel-Mount Jacks
44 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors (50 ohm/75 ohm) Performance Specifications Characteristics Electrical Impedance, Nom. (Ohms) Working Voltage (Volts RMS) Contact Resistance (Milliohms) Initial Insulation Resistance (Megohms) Dielectric Withstanding Voltage (VAC) Corona Level at 70,000 ft. (Volts, RMS) RF Leakage, Max. (dB) RF Insertion Loss, Max. (dB) Frequency Range (GHz) VSWR in Frequency Range Max. Mechanical Force to Engage (lbs. [N])/couple, (in-lbs. [N-M]) max. Coupling Nut Retention, Min. N [lbs.] Cable Retention, N [lbs.] Durability (Cycles) Jam Nut Mounting Torque, Max. [N•m] (in. lbs.) Environmental Temperature Range, Operating (C°) Vibration Physical Shock
Single Crimp (MIL Type)
Category B O Crimp (MIL Type)
Straight Solder Clamp
Right-Angle Solder Clamp
Commercial O Crimp & Hex Crimp 50 Ohms
Commercial O Crimp & Hex Crimp 75 Ohms
Commercial PC Board 50 & 75 Ohms
Commercial Solder 50 Ohm Jacks
50
50
50
50
50
75
50 & 75
50 & 75
500
500
500
500
500
500
500
500
Inner: 1.5 Outer: 0.3
Inner: 1.5 Outer: 0.2
Inner: 1.5 Outer: .20
Inner: 1.5 Outer: .20
Inner: 2.0 Outer: 1.0
Inner: 2.0 Outer: 2.0
Inner: 6/1.5 Outer: 3/0.2
Inner: 2.75 Outer: 1.0
5000
5000
5000
5000
5000
5000
5000
5000
1500
1500
1500
1500
1500
1500
1500
1500
375
375
375
375
375
375
—
375
—
-55 at 2-3 GHz 0.2 at 3 GHz
-55 at 2-3 GHz 0.3 at 3 GHz
-55 at 2-3 GHz 0.2 at 3 GHz
-55 at 1-2 GHz 0.15 at 2 GHz
—
—
—
-55 at 2-3 GHz 0.2 at 3 GHz
—
—
0-2.5
0-4
0-4
0-4
0-4
0-2
0-4 and 0-2
0-4
1.35
1.30
1.30
1.35
1.30
1.30
—
—
13.3/11.12 [3/2.5] 444.8 [100] 266.9 [60] (RG58C/U) 500 25 [2.8]
13.3/11.12 [3/2.5] 444.8 [100] 266.9 [60] (RG58C/U) 500 25 [2.8]
13.3/.028 [3/2.5] 444.8 [100] 177.9 [40] (RG58C/U) 500 25 [2.8]
13.3/.028 [3/2.5] 444.8 [100] 177.9 [40] (RG58C/U) 500
26.7/26.69 [6/6.0] 266.9 [60] 266.9 [60] (RG58C/U) 500 25 [2.8]
26.7/26.69 [6/6.0] 266.9 [60] 266.9 [60] (RG58C/U) 500 25 [2.8]
—
—
—
—
266.9 [60] (PCB Ret) 500 253/124 [2.8/1.4]
500 25 [2.8]
-55 to +85
-65 to +165
MIL-STD-202 Method 201A
-65 to +1651 -55 to +852 MIL-STD-202 MIL-STD-202 Method 204 Method 204 Cond. B Cond. B MIL-STD-202 MIL-STD-202 Method 213 Method 213 Cond. G, 50 G’s Cond. G, 50 G’s -65 to +85
—
-65 to +165
-65 to +165
-55 to +85
-55 to +85
MIL-STD-202 Method 204 Cond. B MIL-STD-202 Method 213 Cond. G
MIL-STD-202 Method 204 Cond. B MIL-STD-202 Method 213 Cond. G
MIL-STD-1344 Method 2005 Cond. III MIL-STD-1344 Method 2004 Cond. G, 100 G’s MIL-STD-1344 Method 1003 Cond. A MIL-STD-1344 Method 1002 Type II MIL-STD-1344 Method 1001 Cond. B 108-12044 108-12047
MIL-STD-202 Method 204 Cond. B MIL-STD-202 Method 213 Cond. I, 100 G’s
MIL-STD-202 Method 213 Cond. I or A, 50 G’s
MIL-STD-202 Method 204 Cond. B MIL-STD-202 Method 213 Cond. I, 100 G’s
MIL-STD-202 Method 107
MIL-STD-202 Method 107
MIL-STD-202 Method 107
MIL-STD-202 Method 106
MIL-STD-202 Method 106
MIL-STD-202 Method 106
MIL-STD-202 Method 101 Cond. B
MIL-STD-202 Method 101 Cond. B
MIL-STD-202 Method 101 Cond. B
108-12095
108-12078
108-12079
Thermal Shock
MIL-STD-202 Method 107
MIL-STD-202 Method 107
MIL-STD-202 Method 107
MIL-STD-202 Method 107
Moisture Resistance
MIL-STD-202 Method 106
MIL-STD-202 Method 106
MIL-STD-202 Method 106
MIL-STD-202 Method 106
Salt Spray
MIL-STD-202 Method 101 Cond. B
MIL-STD-202 Method 101 Cond. B
MIL-STD-202 Method 101 Cond. B
MIL-STD-202 Method 101 Cond. B
108-12002
108-12020
—
—
Product Specification
—
1Assembled
to cable with polytetrafluorethylene dielectric. to cable with polyethylene dielectric. 3For Metal Threads 4For Polyester Threads 2Assembled
45 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors (50 ohm/75 ohm) Performance Specifications (Continued) Connector Component
Single Crimp (MIL Type)
Category B&C O Crimp (MIL Type)
Straight Solder Clamp
Right-Angle Solder Clamp
Commercial O Crimp Hex Crimp & Terminators
Commercial PCB Solder
Commercial PCB Press Fit
Commercial Solder Ohm Jacks
Brass QQ-B-626 Brass QQ-B-626 Beryl. Copper QQ-C-530
Brass QQ-B-626
Brass
Brass
Brass QQ-B-626 Zinc QQ-Z-363
—
—
—
Phos. Bronze QQ-B-750
Brass
Brass
Brass MIL-C-21768
—
—
—
Zinc QQ-Z-363
Zinc Zinc QQ-Z-363
Adapters
Connector Material Collar Outer Contact (Plug) Shell (Jack)
Brass QQ-B-626
Brass QQ-B-626
Brass
—
Zinc QQ-Z-363
Dielectric
TEFLON MIL-P-19468 Polypropylene Gen. Purpose
TEFLON MIL-P-19468
TEFLON
TEFLON
Polyethylene Polypropylene Polymethylpentene Gen. Purpose
Center Contact (Plug)
Brass QQ-B-626
Brass QQ-B-626
Brass
Brass
Brass QQ-B-626
—
—
—
Center Contact (Jack)
Beryl. Copper ASTM-B-643 QQ-C-530
Beryl. Copper ASTM-B-643 QQ-C-530
Beryl. Copper
Beryl. Copper
Beryl. Copper QQ-C-530
Phos. Bronze QQ-B-750
Beryl. Copper QQ-C-530
Phos. Bronze QQ-B-570 Beryl. Copper QQ-C-530
Silicon Rubber QQ-R-765 Copper Ferrule QQ-C-576 Connector Primary Finishes2
Silicon Rubber QQ-R-765 Copper QQ-C-576
Silicon Rubber
Silicon Rubber
—
—
—
—
—
Silicon Rubber QQ-R-765 Copper QQ-C-576
TEFLON MIL-P-19468 Polypropylene, Gen. Purpose Brass QQ-B-626 Beryl. Copper QQ-C-530 Phos. Bronze QQ-B-570 Beryl. Copper QQ-C-530 Silicon Rubber QQ-R-765
—
—
—
—
Silver/ Bright Nickel
Silver/ Bright Nickel
Bright Nickel QQ-N-290
—
—
—
—
Tin Lead ASTM-B-545
—
—
—
Gasket
Collar
Silver QQ-S-365 Bright Nickel QQ-N-290
Silver QQ-S-365 Bright Nickel QQ-N-290 Silver QQ-S-365 Bright Nickel QQ-N-290
Outer Contacts (Plug & Jack)
QQ-S-365 Gold
Center Contacts (Plug & Jack)
MIL-G-45204 Silver
Gold MIL-G-45204
Gold
Ferrule3
QQ-S-365
Silver QQ-S-365 Tin Lead ASTM-B-545
—
Silver/ Bright Nickel
Polymethylpentene TEFLON MIL-P-19468 Gen. Purpose1
QQ-Z-363 Brass QQ-B-626 TEFLON MIL-P-19468 Polyester PBT MIL-P-24519
Brass QQ-B-626 Brass QQ-B-626 Beryl. Copper QQ-C-530 Brass QQ-B-626
Silver QQ-S-365 Bright Nickel QQ-N-290 Silver Bright or Silver/ Bright Nickel Bright Nickel Bright Nickel QQ-S-365 Matte Nickel Bright Nickel QQ-N-290 QQ-N-290 QQ-N-290 Bright Nickel QQ-N-290 QQ-N-290 Tin Lead Tin Lead Tin Lead Silver ASTM-B-545 ASTM-B-545 Gold ASTM-B-545 QQ-S-365 Gold Silver, QQ-S-365 Silver, QQ-S-365 MIL-B-45204 Silver, QQ-S-365 Gold Gold, MIL-G-45204 Gold, MIL-G-45204 Gold, MIL-G-45204 MIL-G-45204 —
1Several
pc board connectors have an outer polyester PBT insulator per MIL-P-24519. more than one finish is listed, refer to individual catalog page(s) or customer drawings for exact specification. 3Ferrules with tin-lead finish are used with nickel plated outer contacts. 2If
TEFLON is a trademark of E.I. Dupont de Nemours and Company.
46 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm Plugs, Crimp
Single Crimp
Hex and O Crimp
L Max.
14.53 [.572] Dia. Max.
14.53 [.572] Dia. Max.
L Max.
CERTI-CRIMP Hand Tool with Integral Die
Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1
Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1
—
69471-
RG/U Cable
Termination Type
Body Plating
Dielectric
Style
Dim. L
178, 178A, 178B, 196, 196A
Single Crimp
Silver
TEFLON
MIL Type
33.33 1.312
69245-4
Hex Crimp
Nickel
Polyethylene
Commercial
—
58436-3
—
2-5221128-1
O Crimp
Nickel
Polyethylene
Commercial
220009-5
318450-2
220217-3
1-5227079-6
O Crimp
Nickel
TEFLON
MIL Type
—
1424050-1
220026-1
5225395-7
Single Crimp
Silver
TEFLON
MIL Type
69245-2
—
69422-
2-5330061-1
Hex Crimp
Nickel
Polyethylene
Commercial
—
2-5221128-3
O Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
TEFLON
MIL Type
174, 188, 188A, 316
179, 179A, 179B, 161, 187, 187A, BELDEN 9221
RD 316, 188, Double Braid BELDEN 8219 BELDEN 9907, 89907 COMM/ SCOPE 2104 BELDEN 8218
Part No.
5330876-0
Hex Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
Polyethylene
Commercial
33.53 1.320 27.69 1.090 30.18 1.188 33.33 1.312 33.53 1.320 27.69 1.090 -30.18 1.188 33.33 1.312 27.69 1.090 33.53 1.320 27.69 1.090
O Crimp
Nickel
Polyethylene
Commercial
27.69 1.090
220187-1
318452-2
220217-1
6-5227079-84
O Crimp
Nickel
Polyethylene
Commercial
69477-4
58539-1
58376-1
1-5227079-9
O Crimp
Nickel
TEFLON
MIL Type
27.69 1.090 30.18 1.188
—
91904-1
69669-2
1-5225395-0
Single Crimp
Silver
TEFLON
MIL Type
O Crimp
Nickel
Polyethylene
Commercial
—
58436-3
—
1424050-1
220217-3
2-5227079-2
—
—
220026-1
5225395-8
—
91910-1
69408-
2-5329446-1
69477-4
58539-1
—
8-5227079-2
—
58436-12
—
2-5221128-7
220187-1
58435-11
220217-1
6-5227079-73
1Order
Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. use with BELDEN 9907 cable, COMM/SCOPE 3104 cable, and BELDEN 8219 cable only. 4For use with BELDEN 89907 cable, and COMM/SCOPE 2104 cable only. 2Order 3For
BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
47 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Plugs, Crimp (Continued)
Single Crimp
Hex and O Crimp
L Max.
14.53 [.572] Dia. Max.
RG/U Cable
58, 58A, 58B, 58C
BELDEN 88240, BERK-TEK BTDC-58, COMM/ SCOPE 2135
223, 55, 55A, 55B
142, 142A, 142B, 400
Termination Type
Body Plating
Dielectric
Style
Dim. L
Hex Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
Polyethylene
Commercial
33.53 1.320 27.69 1.090 33.74 1.328 33.33 1.312 33.53 1.320 33.33 1.312 33.33 1.312 27.69 1.280 43.64 1.718 33.33 1.312 27.69 1.090 30.18 1.188 33.33 1.312
O Crimp
Nickel
TEFLON
MIL Type
Single Crimp
Silver
TEFLON
MIL Type
Hex Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
TEFLON
MIL Type
O Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
TEFLON
MIL Type
Single Crimp
Silver
TEFLON
MIL Type
O Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
TEFLON
MIL Type
Single Crimp
Silver
TEFLON
MIL Type
14.53 [.572] Dia. Max.
CERTI-CRIMP Hand Tool with Integral Die
Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1
L Max.
Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1
Part No.
—
58436-12
—
5221128-13
220187-1
58435-11
220217-1
5227079-5
269478-1
220189-3
69727-
5225395-1
2—
91904-4
69223-1
2-5329444-1
—
58436-12
—
1-5221128-0
220217-1
4-5227079-3
69727-
4-5225395-2
220187-1
58435-11
269478-1
220189-3
220187-1
58435-11
269478-1 —
220217-1
5227079-6
220189-3
69727-
5225395-3
91904-3
69424-
2-5329444-2
220217-1
6-5227079-1
220187-1
58435-11
269478-1
220189-3
69727-
269331-1
—
69429-1
5225395-6 2-5330358-2
Consult Tyco Electronics for recommended crimp tooling. 1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. 2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. 3Bulk packaged.
BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
48 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Plugs, Crimp (Continued)
Single Crimp
Hex and O Crimp
L Max.
14.53 [.572] Dia. Max.
RG/U Cable
124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269
Termination Type
Body Plating
Dielectric
Style
Dim. L
Hex Crimp
Nickel
Polyethylene
Commercial
14.53 [.572] Dia. Max.
L Max.
CERTI-CRIMP Hand Tool with Integral Die
Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1
Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1
Part No.
—
58436-12
—
1-5221128-1
220187-2
58435-11
220217-2
5227079-7
220187-2
58435-11
220217-2
1-5227079-1
—
58537-1
—
5225395-2
69141-1
—
—
2-5329445-1
O Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
Polyethylene
Commercial
O Crimp
Nickel
TEFLON
MIL Type
Single Crimp
Silver
TEFLON
MIL Type
33.53 1.320 27.69 1.090 27.69 1.090 30.18 1.188 33.33 1.312
Nickel
Polyethylene
Commercial
33.53 1.320
—
58436-12
—
1-5221128-1
Nickel
TEFLON
MIL Type
34.14 1.344
69477-1
58537-1
69669-1
4-5225395-1
Nickel
Polyethylene
Commercial
33.33 1.312
—
58537-1
—
5-5227079-3
Nickel
Polyethylene
Commercial
33.53 1.320
—
58436-12
—
1-5221128-7
Nickel
TEFLON
MIL Type
30.94 1.218
—
258537-1
69669-1
2-5225395-0
Silver
Polypropylene
MIL Type
41.50 1.634
69652-
—
220000-1
5330878
Silver
TEFLON
MIL Type
27.31 1.075 47.63 1.875 47.63 1.875 47.63 1.875 52.38 2.062
220015-1
—
—
5225886-1
220015-1
—
—
5225886-4
220015-1
—
—
5225886-7
220015-1
—
—
220015-1
—
—
302, BELDEN 88241, 89269, Hex Crimp Hi-Temp 62A, Times PL62, BERK-TEK, BTDC-59, O Crimp BTDC-62 Hi-Temp 59, Times PL59, O Crimp PLF59 (20 AWG C.C.) BELDEN 9104, 9240, Hex Crimp 9112, 9167, 9259, 9266, Times O Crimp FM-59 BELDEN 8281, 9141, 9231, Single Crimp Western Electric 724, 728, 3049 8, 8A, O Crimp 213 11, 11A
O Crimp
Silver
TEFLON
MIL Type
BELDEN 9914, Times FM-8 Alpha 9847, BELDEN 8213, 9292 9, 9A, 9B, 214
O Crimp
Silver
TEFLON
MIL Type
O Crimp
Silver
TEFLON
MIL Type
O Crimp
Silver
TEFLON
MIL Type
225886-5 5225886-1
1Order
Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. 2Tyco Electronics PRO-CRIMPER II Hand Tool Frame without dies Part No. 354940-1 2Order
BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
49 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Plugs, Twist-On Related Product Data Twist-On plugs must be used with cable that has a solid conductor. These plugs are not recommended for applications where the cable frequently moves or flexes.
38.10 [1.500]
14.53 [.572] Dia. Max.
RG/U Cable 59, 59A, 59B
Mating Twist-On Jack — Page 52
Right-Angle Plugs, Crimp
Contact Plating
Body Plating
Dielectric
Style
Part No.
Nickel
Polymethylpentene
Commercial
5414265-3
Gold
Single Crimp
Hex and O Crimp
26.57 [1.046]
26.57 [1.046]
L Max. L Max. 14.53 [.572] Dia. Max.
RG/U Cable
174, 188, 188A, 316 179, 179A, 179B, 161, 187, 187A, BELDEN 9221 180, 180A, 180B, 195, 195A BELDEN 9907, 89907, 8219, COMM/SCOPE 2104, 3104
58, 58A, 58B, 58C
55, 55A, 55B, 223 142, 142A, 142B, 400 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269
14.53 [.572] Dia. Max.
CERTI-CRIMP Hand Tool with Integral Die
Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1
Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1
Part No.
—
58436-3
—
5413959-3
—
91910-1
69422-
5331178-0
39.45 1.553
—
58436-3
—
5413959-4
Commercial
39.45 1.553
—
58436-3
—
5413959-5
Polymethylpentene
Commercial
39.45 1.553
—
58436-1
—
5413959-6
Nickel
Polymethylpentene
Commercial
—
58436-1
—
5413959-1
Gold
Nickel
TEFLON
MIL Type
69478-1
220189-3
69727-1
5225974-1
Single Crimp
Gold
Silver
TEFLON
MIL Type
—
91904-1
69223-1
5331175-0
O Crimp
Gold
Nickel
TEFLON
MIL Type
69478-1
220189-3
69727-1
5225974-2
Single Crimp
Gold
Silver
TEFLON
MIL Type
—
91904-3
69429-1
5331182-0
Single Crimp
Gold
Silver
TEFLON
MIL Type
39.45 1.553 37.29 1.468 44.45 1.750 37.29 1.468 44.45 1.750 44.45 1.750
69331-1
—
69429-1
5331182-0
O Crimp
Gold
Nickel
TEFLON
MIL Type
37.29 1.468
—
58537-1
69669-1
5225974-5
Termination Type
Center Contact Plating
Body Plating
Dielectric
Style
Dim. L
Hex Crimp
Gold
Nickel
Polymethylpentene
Commercial
Single Crimp
Gold
Silver
TEFLON
MIL Type
39.45 1.553 44.45 1.750
Hex Crimp
Gold
Nickel
Polymethylpentene
Commercial
Hex Crimp
Gold
Nickel
Polymethylpentene
Hex Crimp
Gold
Nickel
Hex Crimp
Gold
O Crimp
BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
50 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Jacks, Crimp
Single Crimp
Hex and O Crimp
11.1 [.437] Dia. Max.
RG/U Cable
174, 188, 188A, 316
179, 179A, 179B, 161, 187, 187A, BELDEN 9221 58, 58A, 58B, 58C 223, 55, 55A, 55B 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 1Order
11.08 [.436] Dia. Max.
L Max.
CERTI-CRIMP Hand Tool with Integral Die
Termination Type
Center Contact Plating
Body Plating
Dielectric
Style
Dim. L
Hex Crimp
Gold
Nickel
Commercial
O Crimp
Gold
Nickel
Polymethylpentene Polypropylene
Commercial
O Crimp
Gold
Nickel
TEFLON
MIL Type
Single Crimp
Gold
Silver
TEFLON
MIL Type
33.02 1.300 30.48 1.200 -30.48 1.200 33.33 1.312
Hex Crimp
Gold
Nickel
Polymethylpentene
Commercial
-33.02 1.300
—
O Crimp
Gold
Nickel
Polypropylene
Commercial
O Crimp
Gold
Nickel
TEFLON
MIL Type
Single Crimp
Gold
Silver
TEFLON
MIL Type
30.48 1.200 30.48 1.200 33.33 1.312
O Crimp
Gold
Nickel
Polypropylene
Commercial
O Crimp
Gold
Nickel
TEFLON
MIL Type
Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1
—
58436-3
—
L Max.
Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1
Part No.
—
5413779-3
1424050-1
220217-3
5228979-7
—
1424050-1
220026-1
5225396-7
—
—
69422-
2-5330062-1
58436-3
—
2-5413779-4
220187-1
58435-11
220217-1
5228979-5
2—
91901-1
69727-
5225396-11
69140-2
91904-3
69424-
30.48 1.200
220187-2
58435-11
220217-2
5228979-6
30.48 1.200
—
58537-1
269669-1
5225396-2
2-5329452-2
Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
51 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Jacks, Twist-On Related Product Data Twist-on jacks must be used with cable that has a solid conductor. These jacks are not recommended for applications where the cable frequently moves or flexes.
40.14 Max. [1.580]
Mating Twist-On Plug — Page 50
RG/U Cable 59, 59A, 59B
Center Contact Gold
Body Plating Nickel
Dielectric
Style
Part No.
Acetal
Commercial
222428-1
Panel Jacks, Crimp 11.2 [.441] Dia. 12.7 ±0.1 [.500 ±.004]
17.84 Max. [.702]
12.7 ±0.1 [.500 ±.004]
28.96 [1.140] Max.
2.77 Dia. [.109]
Recommended Panel Cutout
RG/U Cable
Termination Type
Center Contact Plating
174, 188, 188A, 316 58, 58A, 58B, 58C 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269, 89269
O Crimp O Crimp
Gold Gold
Nickel Nickel
TEFLON TEFLON
MIL Type MIL Type
— -69478-1
Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 1424050-1 91901-1
O Crimp
Gold
Nickel
TEFLON
MIL Type
-69477-1
258537-1
Body Plating
Dielectric
Style
CERTI-CRIMP Hand Tool with Integral Die
Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 220026-1 69727-
5225397-7 5225397-1
269669-1
5225397-2
Part No.
BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
52 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Bulkhead Jacks, Crimp
Single Crimp
Hex and O Crimp
Note: Panel Insulating Bushings — Page 54
H H
L Max.
L Max.
+0.13
12.83 -0.00 Dia. [.505 +.005 ]
12.82 [.505] Dia. Min.
Recommended Panel Cutouts
-.000
11.04 [.435] Min.
Maximum Panel Thickness 3.18 [.125]
+0.08
5.54 -0.00 [.218 +.003 ] -.000
H = 11/16" across flats, 20.32 [.800] Max. across points
RG/U Cable
174, 188, 188A, 316
Termination Type
Center Contact Plating
Body Plating
Dielectric
Style
Dim. L
Hex Crimp
Gold
Nickel
Commercial
O Crimp
Gold
Nickel
Polymethylpentene Polypropylene
Commercial
O Crimp
Gold
Nickel
TEFLON
MIL Type
Single Crimp
Gold
Silver
TEFLON
MIL Type
36.83 1.450 34.93 1.375 35.71 1.406 32.13 1.265 35.71 1.406 32.13 1.265 35.71 1.406
179, 179A, 179B, 161, 187, 187A, BELDEN 9221
O Crimp
Gold
Nickel
TEFLON
MIL Type
Single Crimp
Gold
Silver
TEFLON
MIL Type
Times RD316
O Crimp
Gold
Nickel
TEFLON
MIL Type
CERTI-CRIMP Hand Tool with Integral Die —
Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 58436-3
Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1
Part No.
—
5413771-3
—
—
220217-3
5228980-7
—
—
220026-1
5225398-7
—
—
69422-
—
1424050-1
220026-1
—
91910-1
69408-
2-5329458-1
—
91904-1
69669-2
1-5225398-5
2-5330063-1 5225398-8
BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
53 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Bulkhead Jacks, Crimp (Continued)
Single Crimp
Hex and O Crimp
Note: Panel Insulating Bushings — at the bottom of this page
L Max.
H
H
L Max.
+0.13
12.83 -0.00 Dia. [.505 +.005 ]
12.82 [.505] Dia. Min.
-.000
Recommended Panel Cutouts
11.04 [.435] Min.
Maximum Panel Thickness 3.18 [.125]
+0.08
5.54 -0.00 [.218 +.003 ] -.000
H = 11/16" across flats, 20.32 [.800] Max. across points
Style
Dim. L
CERTI-CRIMP Hand Tool with Integral Die
Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1
Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1
Part No.
Polymethylpentene
Commercial
36.83 1.450
—
58436-1
—
5413771-1
Nickel
Polypropylene
Commercial
220187-1
58435-11
220217-1
5228980-5
Gold
Nickel
TEFLON
MIL Type
—
91901-1
69727-
5225398-1
Single Crimp
Gold
Silver
TEFLON
MIL Type
—
91904-4
69223-1
2-5329456-1
O Crimp
Gold
Nickel
TEFLON
MIL Type
—
91901-1
69727-
5225398-3
O Crimp
Gold
Nickel
TEFLON
MIL Type
34.93 1.375 41.28 1.625 32.13 1.265 35.71 1.406 35.71 1.406
—
91901-1
69727-
5225398-6
O Crimp
Gold
Nickel
Polypropylene
Commercial
34.93 1.375
220187-2
58435-11
220217-2
5228980-6
RG/U Cable
Termination Type
Center Contact Plating
Body Plating
Dielectric
58, 58A, 58B, 58C, BELDEN 88240, BERK-TEK BTDC-58, COMM/SCOPE 2135
Hex Crimp
Gold
Nickel
O Crimp
Gold
O Crimp
58, 58A, 58B, 58C
223, 55, 55A, 55B 142, 142A, 142B, 400 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 1Order
Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
Panel Insulating Bushings for Bulkhead Jacks
0.89 [.035] 12.93 [.509] Dia.
0.81 [.032]
5.46 [.215]
14.73±0.13 [.580±.005] Dia.
13.95 [.549] Dia.
Material — Nylon
14.1±0.08 [.555±.003]
Note: Can not be used with single crimp bulkhead jacks. BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company.
17.45 [.687] Dia.
14.58 Dia. [.574]
Recommended Panel Cutout
Part No. 330620 (2 Required)
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
54 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Plugs, for JIS Cables, Crimp Plating Body — Nickel Center Contact — Gold 14.53 [.572] Dia. Max.
Bulkhead Solder Jacks, Front Mount
JIS Cable
Termination Type
3D-2V
Hex Crimp
L Max.
Dielectric
Dim. L
Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1
Part No.
Polyethylene
33.53 1.320
58436-1
3-5221128-1
Without Solder Terminal
With Solder Terminal
Body Plating — Nickel 22.23 [.875] 9.65/9.75 [.380/.384] Dia.
Accepts 1.5 [.059] Dia. Max. Wire
3/8" - 32 Thread
Accepts 1.5 [.059] Dia. Max. Wire
3/8" - 32 Thread
.396/4.04 [.156/.159]
Recommended Panel Cutout
L Max.
W Dia. Max.
Contact Material
Dielectric
Silver
VALOX
VALOX Gold TEFLON
Tin
TEFLON is a trademark of E.I. Dupont de Nemours and Company. VALOX is a trademark of General Electric Company.
VALOX
Dimensions L W 26.93 1.060 33.33 1.312 26.93 1.060 33.33 1.312 26.93 1.060 33.33 1.312 26.93 1.060
L Max.
W Dia. Max.
13.09 .515 13.09 .515 13.09 .515 13.09 .515 13.09 .515 13.09 .515 13.09 .515
Panel Thickness
Insulating Bushing
1.17-3.18 .046-.125 1.17-6.35 .046-.250 1.17-3.18 .046-.125 1.17-6.35 .046-.250 1.17-3.18 .046-.125 1.17-6.35 .046-.250 1.17-3.18 .046-.125
227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1
Part No. Without Solder With Solder Terminal* Terminal** 5227754-3
5227755-3
—
5227169-7
5227754-2
5227755-2
5227169-4
5227169-8
5227715-3
5227716-3
—
5227169-5
5227754-1
5227755-1
**Includes lockwasher and jam nut. **Includes solder terminal and jam nut.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
55 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Insulating Bushings
1.09 Max. [.043] 11.43 [.450]
4.04 Max. [.159]
0.94 [.030] Max.
1.78 [.070]
10.93 Dia. [.430]
14.86 Dia. [.585]
3.94 Dia. [.155]
12.7 [.500] Dia.
0.81 [.032]
11.94 [.470]
9.53 Dia. [.375]
15.88 Dia. [.625]
9.53 [.375]
Part No. 227223-1
Part No. 221951-1
11.56 ±0.08 [.455 ±.003] Dia.
12.83 ±0.08 [.505 ±.003] Dia.
10.97 ±0.06 [.432 ±.003]
12.07±0.08 [.475 ±.003]
Recommended Panel Cutout
Recommended Panel Cutout 3/8" - 24 Thread
Isolated Bulkhead Solder Jacks, Front Mount
Accepts 1.5 [.059] DIa. Max. Wire
Plating Body — Nickel Dielectric — White VALOX Center Contact Plating Tin Silver Gold
Flange & Thread Material VALOX VALOX VALOX
Part No. 5227726-1 5227726-2 5227726-3
+0.13
9.91 -0.20 Dia. [.390 +.005 ] -.000
3.89 [.153
31.75 Max. [1.250]
13.09 Dia. [.515] Max.
+0.08 -0.00 +.003 ] -.000
Panel Thickness 1.17-6.35 [.046-.250]
Recommended Panel Cutout 3/8" - 24 Thread +0.08
Plating Body — Nickel Center Contact — Silver Dielectric — Black VALOX Flange & Thread Material — Black VALOX
9.60 -0.00 Dia. [.378 +.003 ] -.000
12.83 [.505] Max. 3.94 [.155
26.80 [1.055] Max.
Panel Thickness 1.17-3.18 [.046-.125]
Recommended Panel Cutout
Part No. 5414194-1
Sealed Bulkhead Solder Jack, Rear Mount Plating Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene This connector is designed to prevent moisture from entering the interface from the rear of the connector.
VALOX is a trademark of General Electric Company.
+0.08 -0.00 +.003 ] -.000
Rubber Gasket +0.13
17.78 Dia. [.700] Max.
1/2" - 28 Thread
12.83 -0.00 Dia. [.505 +.005 ] -.000
Accepts . 1.5 [.059] DIa. Max. Wire +0.08
5.54 -0.00 [.218 +.003 ]
31.75 [1.250] Max.
-.000
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
Part No. 5227426-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
56 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Right-Angle Jacks PC Board/Panel Mount
VALOX Body
Metal Body
1/2-28 Thread
1/2-28 Thread C Mtg. Hgt.
Body — Nickel Dielectric — Polymethylpentene
C L
A
C Mtg. Hgt.
C L
B
A
B
34.93 [1.375]
34.93 [1.375]
Mounting Post Style Body Material
Center Contact Plating
Dimensions
Tin
L
VALOX, White
Gold1 Gold1 Tin
Compliant Post VALOX, Black
Gold1 Gold1 Gold1
E L
Tin Gold1 Metal Gold1
+0.13
12.83 -0.00 Dia. [.505 +.005 ]
Gold2
-.000
High Temp. Housing
+0.08
5.54 -0.00 Dia. [.218 +.003 ]
Gold1
A
B
C
8.59 .338 8.59 .338 6.91 .272 8.59 .338 8.59 .338 6.91 .272 6.17 .243 8.26 .325 8.26 .325 6.91 .272 6.91 .272 6.91 .272
21.21 .835 21.21 .835 21.21 .835 21.21 .835 21.21 .835 21.21 .835 21.21 .835 20.83 .820 20.83 .820 20.83 .820 20.83 .820 21.21 .835
15.88 .625 15.88 .625 13.18 .519 15.88 .625 15.88 .625 13.18 .519 11.68 .460 15.88 .625 15.88 .625 12.70 .500 12.70 .500 13.18 .519
Part No. Without With L Mounting Posts Mounting Posts 3.48 5226990-1 5227161-1 .137 3.48 5226990-3 5227161-3 .137 3.48 — 5227161-7 .137 3.48 — 5227161-2 .137 3.48 5226990-6 5227161-6 .137 3.48 — 5227161-9 .137 —
With Compliant Posts
L
—
—
—
—
—
—
—
—
—
—
—
—
5415046-1
—
—
—
—
5227661-1
—
—
5227676-1
5227677-1
—
—
1274668-1
5413879-1
—
—
—
5413879-2
3.48 .137 3.48 .137 3.48 .137 3.48 .137
—
—
—
—
—
5415218-5
2.79 .110
Plating: Gold1 — 0.00076 [.000030] thick Gold2 — 0.00127 [.000050] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54.
-.000
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Lockwasher and Jam Nut
Without Mounting Posts 10.16 ±0.08 [.400 ±.003]
With Mounting Posts 2.64 [.104] Dia. Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes)
5.08 ±0.05 [.200 ±.002]
5.08 ±0.05 [.200 ±.002] G
Part No. 1-329632-2
Part No. 1-329631-2
2.54 ±0.05 [.100 ±.002]
S
10.16 ±0.08 [.400 ±.003] 5.08 ±0.05 [.200 ±.002]
5.08 ±0.05 Mating [.200 ±.002] Face
Mating Face G
0.89 ±0.08 [.035 ±.003] 2.54 ±0.05 [.100 ±.002]
(Top View)
2.01 ±0.05 [.079 ±.002] (2 Holes)
S
0.89 ±0.08 [.035 ±.003]
(Top View)
Recommended PC Board Layouts
VALOX is a trademark of General Electric Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
57 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Vertical Jacks PC Board/Panel Mount Plating Body — Nickel Dielectric — Polymethylpentene
VALOX Body
Metal Body L
L
1/2-28 Thread
15.88 [.625]
B +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000
Body Material
+0.08 5.54 -0.00 Dia. [.218 +.003 ] -.000
Maximum Panel Thickness 6.1 [.240]
VALOX, White
Recommended Panel Cutout
VALOX, Black
15.88 [.625]
B
34.93 [1.375] Mtg. Hgt.
Center Contact Plating
Dim. B
Dim. L
Tin
21.21 .835 21.21 .835 21.21 .835 21.21 .835 20.83 .820 20.83 .820
3.48 .137 3.48 .137 3.48 .137 3.48 .137 3.48 .137 3.48 .137
Gold Tin Gold Tin
Lockwasher and Jam Nut
1/2-28 Thread
Metal Gold
34.93 [1.375] Mtg. Hgt.
Part No. Without With Mounting Mounting Posts Posts 5226993-1
5227222-1
5226993-3
5227222-3
5226993-2
5227222-2
5226993-6
5227222-6
—
5227671-1
—
5227673-1
Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54.
Part No. 1-329632-2
Part No. 1-329631-2
Without Mounting Posts
5.08 [.200
With Mounting Posts 2.64 [.104] Dia. Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes)
±0.05 ±.002]
5.08 ±0.05 [.200 ±.002] 2.54 ±0.05 [.100 ±.002]
10.16 ±0.08 [.400 ±.003] G S 10.16 ±0.08 [.400 ±.003]
0.89 ±0.08 [.035 ±.003]
2.01 ±0.08 [.079 ±.003] (2 Holes)
5.08 ±0.05 [.200 ±.002]
2.54 ±0.05 [.100 ±.002]
10.16 ±0.08 [.400 ±.003] G S 10.16 ±0.08 [.400 ±.003]
(Top View)
5.08 ±0.05 [.200 ±.002]
0.89 ±0.08 [.035 ±.003]
(Top View)
Recommended PC Board Layouts
* Screw for board thickness of 2.38 [.093] or greater Part No. 221108-2. Screw for thickness of less than 2.38 [.093] Part No. 221108-4.
VALOX is a trademark of General Electric Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
58 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Jacks with Mounting Flanges PC Board/Panel Mount
1/2-28 Thread 15.88 [.625] Mounting Height
+0.13
12.83 -0.00 Dia. [.505 +.005 ] -.000
C L
8.59 [.338]
21.21 [.835]
34.93 [1.375]
+0.08 5.54 -0.00 Dia. [.218 +.003 ] -.000
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Body Material
Center Contact Plating Tin Gold
VALOX, White
Part No. 5226978-1 5226978-3
Lockwasher and Jam Nut 3.3 [.130] Dia. Clearance Hole for 5-40 Screw 22.86 ±0.08 [.900 ±.003]
8.89 [.350]
Part No. 1-329632-2
11.43 [.450]
Part No. 1-329631-2
G
S
Mating Face
2.54 [.100]
0.89 ±0.08 [.035 ±.003] (Top View)
Recommended PC Board Layout
VALOX is a trademark of General Electric Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
59 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Vertical Metalized Jacks PC Board Mount Body Plating
Recommended PC Board Layouts
Style A
Center Contact Plating
Dielectric
Style
Silver
VALOX
A
Gold
VALOX
A
Tin
VALOX
A
Gold
VALOX
A
Silver
VALOX
C
Gold
VALOX
E
Gold
TEFLON
B
Silver
VALOX
C
Gold
VALOX
D
L 12.7 ±0.08 [.500 ±.003] 6.35 ±0.05 [.250 ±.002]
Nickel
12.7 ±0.08 [.500 ±.003]
17.45 Sq. [.687] 15.88 [.625]
Drill Holes for 0.94 ±0.05 [.037 ± .002] Dia. Pin (5 Places)
6.35 ±0.05 [.250 ±.002]
Tin-Lead
1With
Style B
L
Leg Length L 6.35 .250 6.35 .250 6.35 .250 3.81 .150 4.45 .175 6.35 .250 3.30 .130 3.18 .125 3.43 .135
Part No. 5227699-1 5227699-2 5227699-3 5414460-11 5222420-1 5415189-1 5413969-2 5414305-1 5221123-2
.76 [.030] standoffs on top of legs.
6.88 ±0.08 [.271 ±.003] 1.50 ±0.08 Dia. [.059 ±.003] (4 Holes)
3.44 ±0.08 [.135 ±.003]
6.88 ±0.08 [.271 ±.003]
20.57 [.810] 1.02 ±0.08 Dia. [.040 ±.003]
Style C
3.43 ±0.08 [.135 ±.003]
Style D
6.88 ±0.05 [.271 ±.003]
L
2.44 ±0.08 Dia. [.096 ±.003] (4 Holes)
3.43 ±0.05 [.135 ±.002] 6.88 ±0.05 [.271 ±.003]
4.32 [.170]
1.73 ±0.05 Dia. [.068 ±.002]
6.48 [.255]
1.32 ±0.08 Dia. [.052 ±.003]
3.73 [.147]
15.88 [.625]
16.64 [.655]
1.07 ±0.05 Dia. [.042 ±.002]
L
7.47 [.294]
Style E (Panel Mount) 12.70 0.08 [.500 ±.003] 6.35 ±0.06 [.250 ±.002] Drill Hole to Receive 0.940.06 [.037±.002] Dia. Pin, 5 Required
20.78 0.38 [.818 .015]
TEFLON is a trademark of E.I. Dupont de Nemours and Company. VALOX is a trademark of General Electric Company.
L
12.70 0.08 [.500 ±.003]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
60 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Vertical Metalized Jacks, PC Board Mount
7.50 ± 0.08 [.295 ± .003]
Signal Contact Hole
1.00 ± 0.08 [.039 ± .003] 2 Plcs.
24.00 [.945]
Switching Contact 1.70 ± 0.10 Hole [.067 ± .004]
2.50 ± 0.08 [.098 ± .003] 4 Plcs.
10.72 ± 0.25 [.422 ± .010]
3.00 ± 0.10 [.118 ± .004] 1.50 ± 0.08 [.059 ± .003] 2 Plcs.
10.70 ± 0.08 [.421 ± .003]
Recommended PC Board Layout
Part No. 1274314-1 (Switching)
3.75 ± 0.08 [.148 ± .003] 1.00 ± 0.08 [.039 ± .003]
24.00 [.945]
1.70 ± 0.10 [.067 ± .004]
2.50 ± 0.08 [.098 ± .003] 3 Plcs.
3.00 ± 0.10 [.118 ± .004] 1.50 ± 0.08 [.059 ± .003] 2 Plcs.
10.72 ± 0.25 [.422 ± .010] 10.70 ± 0.08 [.421 ± .003]
Part No. 1274315-1
Body Plating Tin Tin
Recommended PC Board Layout
Contact Plating Silver Silver
Dielectric Polyphenylene Polyphenylene
Press Fit Vertical Metalized Jack, PC Board Mount
Part No. 6274314-1 6274315-1
Insulating Bushing
6.88 ±0.05 [.271 ±.002]
11.94 Dia. [.470] Max.
+0.08
1.5 -0.10 [.059 +.003 ] -.004 Dia. 4 Holes
3.43 ±0.05 [.135 ±.002]
6.88 ±0.05 [.271 ±.002] 20.57 [.810] Max.
1.02 ±0.08 Dia. [.040 ±.003]
Material — Polypropylene Part No. 222163-1 Only to be used on Part Nos. 5222006-1 & 5222462-1
14.61 Dia. [.575]
Recommended PC Board Layout PC Board Thickness Not Less Than 0.99 [.093]
11.94 [.470] Dia.
2.96 [.115] Max. 6.61 [.260] Max.
Part No. 5222006-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
61 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Right-Angle Metalized Jacks, PC Board Mount
6.6 ± 0.08 [.260 ± .003]
10.97 [.432] Mounting Height 3.3 ± 0.08 [.130 ± .003]
C L
± 0.08 ± .003]
2.11 [.083 Dia. (4 holes)
6.6 ± 0.08 [.260 ± .003]
6.15 [.242]
1.17 ± 0.08 Dia. [.046 ± .003]
27.64 ± 0.51 [1.088 ± .020]
Body Plating
Dielectric
Nickel
Polymethylpentene
Tin
TEFLON
Nickel
Polymethylpentene
Center Contact Length 4.34 .171 4.34 .171 3.33 .131
Part No. 5413631-1* 5413631-2* 5413631-3*
Maximum PC Board Thickness 2.54 [.100]
Recommended PC Board Layout
1.19 ±0.18 Dia. [.047 ±.007]
3.81 ±0.08 [.150 ±.003] 8.64 [.340]
7.62 ±0.08 [.300 ±.003]
21.85 [.860]
25.40 [ 1.000]
7.62 ±0.08 [.300 ±.003]
Body
Dielectric
Contact
Nickel
TPX
Gold
Part No. 5414373-1
1.78 ±0.08 Dia. [.070 ±.003] 2 Holes
Recommended PC Board Layouts
6.6 ± 0.08 [.260 ± .003]
Right-Angle Metalized Jacks, PC Board/Panel Mount
3.3 ± 0.08 [.130 ± .003]
27.64 ± 0.51 [1.088 ±.020] 6.15 ± 0.25 [.242 ±.010] 11.66 [.459]
2.11 ± 0.08 Dia. [.083 ± .003] 4 holes
6.6 ± 0.08 [.260 ± .003]
10.97 ± 0.18 [.432 ±.007]
1.17 ± 0.08 Dia. [.046 ± .003]
Body Plating Tin Tin
Dielectric TEFLON TPX
Part No. 5415025-2 5415025-1
+0.13
12.83 -0.00 Dia. [.505 +.005 ] -.000
1/2-28 Thread 4.34 [.171] +0.08
5.64 -0.00 Dia. [.222 +.003 ]
Lockwasher and Jam Nut see page 59.
-.000
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout TEFLON is a trademark of E.I. Dupont de Nemours and Company. TPX is a trademark of Mitsui Chemicals America, Inc.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
62 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Tee Adapters
Style A
Style B
Style C
(Jack-Plug-Jack)
With Insulated Cover (Jack-Plug-Jack)
(Jack-Jack-Jack)
D
D
Insulation Material Polyphenylene oxide
D
F E E
E F
Style
Body Material and Plating Brass, Nickel
A
B
C
Center Contact Material and Plating BE CU, Gold (30)2 PH BR, Gold (15)2 BE CU, Gold (30)2 PH BR, Gold (15)2 BE CU, Silver (200)2 BE CU, Gold (30)2 BE CU, Silver (200)2 PH BR, Gold (50)2
Zinc, Nickel
Zinc, Nickel Brass, Nickel Zinc, Nickel
Dielectric TEFLON Acetal Acetal Acetal Acetal Acetal TEFLON Acetal
D 32.54 1.281 33.02 1.300 33.02 1.300 33.02 1.300 33.02 1.300 32.54 1.281 32.54 1.281 32.54 1.281
Dimensions E 26.19 1.031 27.31 1.075 27.31 1.075 27.31 1.075 27.31 1.075 31.12 1.225 23.37 .920 23.62 .930
Comparable UG/U Connector
F 14.27 .562 14.50 .571 14.50 .571 14.50 .571 14.50 .571 17.15 .675
274A — — — — 1 —
—
—
—
—
Packaging No. Per Pkg. Bulk (100) Bulk (100) Bulk (100) Individual (1) 3 Individual (1) Bulk (100) Bulk (100) Bulk (100)
Part No. 221543-2 5413592-2 5413592-6 5413592-9 1-5413592-1 5413366-21 221988-1 5414311-1
Gray insulation cover (Microinches min thickness) (Special graphics)
1 2 3
Tee Adapter Covers 114.55 ± 0.76 [4.510 ± .030]
Material — Polypropylene, general purpose
Color
Part No.
Black
221586-1
Ivory
221586-3 15.11 [.595] Dia.
TEFLON is a trademark of E.I. Dupont de Nemours and Company.
5.08 Dia. [.200]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
63 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Jack-Jack Adapters Style B
Style A
Nickel Nickel
Center Contact Plating Silver Gold
Nickel
Gold
Body Plating
35.81 [1.410]
32.54 [1.281]
Bulkhead Jack-Jack Adapters +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000
L Max.
H Max.
Body Plating
Center Contact Plating
Nickel
Silver
Nickel
Gold1
Nickel
Gold2
Dielectric
Style
Part No.
TEFLON TEFLON Polymethylpentene
A A
221551-1 221551-3
B
5414414-1
Dimensions H L 17.45 .687 17.78 .700 17.78 .700
38.10 1.500 36.07 1.420 36.07 1.420
Dielectric
Part No.
TEFLON
330024-
Polyethylene Polyethylene
5228226-1 5228226-3
Plating: Gold1 — 0.00127 [.000050] thick Gold2 — 0.00076 [.000015] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54.
+0.06
5.54 -0.00 [.218 +.003 ] -.000
Recommended Panel Cutout H= 11/16 across flats, 20.32 [.800] across points.
Isolated Bulkhead Jack-Jack Adapter
Body Plating Nickel
Center Contact Plating Gold
+0.13
12.83 -0.00 Dia. [.505 +.005 ] -.000
Dielectric
Part No.
Polymethylpentene
5414105-1
+0.06
5.54 -0.00 Dia. [.218 +.003 ]
36.07 [1.420]
15.87 [.625]
-.000
Recommended Panel Cutout H= 11/16 across flats, 20.32 [.800] across points.
Plug-Plug Adapter
31.8 Ref. [1.252]
Right-Angle Adapters
Nickel Nickel Nickel
Center Contact Plating Silver Gold Gold
Body Plating Nickel
Part No. 415796-1
14.53 Dia [.572] Max.
(Jack-Plug)
Body Plating
Contact Plating Gold
Dielectric
Part No.
TEFLON TEFLON Polymethylpentene
5329517-1 5222165-2 5414666-1
TEFLON is a trademark of E.I. Dupont de Nemours and Company.
22.89 [.901] Max.
26.97 [1.062]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
64 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued) Terminator Plugs 50, 75, 93 Ohm Resistor Specification
Tether
Plating
1 Watt, 50 Ohm 1 Watt, 75 Ohm 1 Watt, 93 Ohm 0.5 Watt, 75 Ohm 1 Watt, 50 Ohm
Body — Nickel Center Contact — Gold Dielectric — Polyethylene 14.53 Dia. [.572] Max.
33.02 [1.300]
1
Part No. With Tether Without Tether 5221629-11 5221629-4 5221629-21 5221629-5 — 5221629-6 — — 1-5221629-61 —
Tether is conductive with #4 stud size
#6 Stud Size
Insulated Terminators
Long Cover
Insulation Material Polyphenylene oxide
38.10 Max. [1.500]
38.10 Max. [1.500]
17.40 [.685]
17.40 [.685]
Register Specification 1 Watt, 50 Ohm
Color Gray Black
Cover Style Long Short Long
Short Cover*
Part No. 5413557-1 5413364-2 5413557-2
* The Short Cover is required when mating the Terminator with a Tee Adapter.
Jack Covers
Shorting Caps 22.10 Max. [.870] 14.53 Dia. [.572] Max.
Body Plating Silver Nickel
Plating Body — Nickel Center Contact — Gold
Part No. 330022 1-330022-2
15.24 [.600] 101.6 [4.000]
14.53 [.572] Dia. Max.
#6 Stud Size
Part No. 413453-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
65 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm Plugs, Crimp
Hex and O Crimp
These connectors have been designed for optimum performance and have a true 75 ohm impedance the complete length of the connector. The crimp die tooling listed below is different from the equivalent 50 ohm connectors.
14.53 [.572] Dia. Max.
L Max.
Plugs Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1
Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1
58425-2
—
5413589-8
318451-2
—
5221185-8
58425-2
—
1-5413589-0
58174-1
58248-3
1-5221185-8
58425-2
—
5413589-3
58174-1
58248-3
5221185-3
58425-1
—
5413589-2
58536-1
58248-2
5221185-2
RG/U Cable
Termination Type
Center Contact Plating
179, 179A, 179B, 187, 187A, 161, BELDEN 9221
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
O Crimp
Gold
Nickel
Polyethelene
Commercial
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
O Crimp
Gold
Nickel
Polyethelene
Commercial
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
O Crimp
Gold
Nickel
Polyethelene
Commercial
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
O Crimp
Gold
Nickel
Polyethelene
Commercial
29.46 1.160 35.56 1.140 29.46 1.160 27.69 1.090 29.46 1.160 27.69 1.090 29.46 1.160 27.69 1.090
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
29.46 1.160
58425-1
—
5413589-1
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
29.46 1.160
58425-1
—
5413589-9
O Crimp
Gold
Nickel
Polyethelene
Commercial
27.69 1.090
58536-1
58248-2
5221185-9
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
58425-1
—
5413589-7
58536-1
—
1-5221185-0
58536-1
—
5221185-1
58538-1
58248-1
5221185-7
Body Plating
Dielectric
Style
Dim. L
AT&T 735A
BELDEN 8218 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 302, BELDEN 89269, 88241, Hi-Temp 62A, Times PL-62, Berk Tek BTDC-59, BTDC-62 BELDEN 8212, 9104, 9112, 9167, 9240, 9259, 9266, Times FM-59, (RG 59 Type with 20 AWG C.C.)
Part No.
O Crimp
Gold
Nickel
Polyethelene
Commercial
BELDEN 9248, 9114
O Crimp
Gold
Nickel
Polyethelene
Commercial
6, 6A
O Crimp
Gold
Nickel
Polyethelene
Commercial
29.46 1.160 27.69 1.090 25.65 1.010 37.85 1.490
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
29.46 1.160
58425-3
—
5413589-5
O Crimp
Gold
Nickel
Polyethelene
Commercial
28.45 1.120
58538-1
58248-1
5221185-5
28.96 1.140 28.96 1.140
58536-1
—
2-5221185-9
58536-1
—
3-5221185-1
BELDEN 9145, AT&T 734A
BELDEN 8281, 9141, 9231, Western Electric 724, 728, 3049 COMM/SCOPE S59 Hec COMM/SCOPE F59 Hec-z
O Crimp
Gold
Nickel
Polyethelene
Commercial
O Crimp
Gold
Nickel
Polyethelene
Commercial
AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
66 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued) Plugs for JIS Cables, Crimp Plating Body — Nickel Center Contact — Gold
14.53 [.572] Dia. Max.
L Max.
JIS Cable
Termination Type
Dielectric
3C-2V
Hex Crimp
Polymethylpentene
2.5C-2V
Hex Crimp
Polymethylpentene
Dim. L
Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1
Part No.
58425-1
1-5413589-1
58425-2
1-5413589-6
Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1
Part No.
58425-2
5413590-4*
29.46 1.160 29.46 1.160
Bulkhead Jacks for JIS Cables, Crimp Plating Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene
20.32 [.800] Max.
L Max.
JIS Cable
Termination Type
Dielectric
Dim. L
1.5C-2V
Hex Crimp
75Ω
36.83 1.450
*Packaged in 100 pieces per bag.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
67 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued) Right-Angle Plugs, Crimp
Hex and O Crimp 27.18 Max. [1.070]
L Max.
14.53 Dia. [.572] Max.
RG/U Cable
Termination Type
Center Contact Plating
Body Plating
Dielectric
Style
Dim. L
Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1
179, 179A, 179B, 187, 187A, 161 BELDEN 9221
Hex Crimp
Gold
Nickel
Polymethylpentene
Commercial
39.45 1.553
58425-2
—
-5413588-8
AT&T 735A
Hex Crimp
Gold
Nickel
Polymethylpentene
Commercial
39.45 1.553
58425-2
—
1-5413588-0
Hex Crimp
Gold
Nickel
Polymethylpentene
Commercial
39.45 1.553
58425-2
—
5413588-4
Hex Crimp
Gold
Nickel
Polymethylpentene
Commercial
39.45 11.553
58425-1
—
5413588-2
O Crimp
Gold
Nickel
Polymethylpentene
Commercial
39.88 1.570
58536-1
58248-2
-5221402-2
Hex Crimp
Gold
Nickel
Polymethylpentene
Commercial
39.45 1.553
58425-1
—
5413588-9
O Crimp
Gold
Nickel
Polymethylpentene
Commercial
39.88 1.570
58536-1
—
5221402-4
AT&T KS 19224 L2, RD179 Double Braid 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, Times FM-59, (RG 59 Type with 20 AWG C.C.) BELDEN 9145, AT&T 734A
Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1
Part No.
AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
68 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued) Jacks, Crimp
Hex and O Crimp
11.08 Dia. [.436] Max.
L Max.
Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1
Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1
58425-2
—
5413760-8
318451-2
—
5221199-5
58425-2
—
5413760-3
RG/U Cable
Termination Type
Center Contact Plating
179, 179A, 179B, 161, 187, 187A, BELDEN 9221
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
O Crimp
Gold
Nickel
Polyethelene
Commercial
BELDEN 8218
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
33.02 1.300 30.48 1.200 33.02 1.300
O Crimp
Gold
Nickel
Polyethelene
Commercial
30.48 1.200
58536-1
58248-2
5221199-2
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
33.02 1.300
58425-1
—
5413760-1
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
33.02 1.300
58425-1
—
5413760-9
O Crimp
Gold
Nickel
Polyethelene
Commercial
30.48 1.200
58536-1
—
5221199-1
140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 302, BELDEN 88241, 89269, Hi-Temp 62A, Times PL-62, Berk Tek BTDC-59, BTDC-62 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, Times FM-59, (RG 59 Type with 20 AWG C.C.) BELDEN 9248, 9114
Body Plating
Dielectric
Style
Dim. L
Part No.
BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
69 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued) Bulkhead Jacks, Crimp
Hex and O Crimp +0.13
12.83 -0.20 Dia. [.505 +.005 ] -.000
+0.08
5.54 -0.00 [.218 +.003 ]
34.93 Max. [1.375]
20.32 [.800] Max.
-.000
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1
Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1
RG/U Cable
Termination Type
Center Contact Plating
Body Plating
Dielectric
Style
Dim. L
179, 179A, 179B, 161, 187, 187A, BELDEN 9221
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
58425-2
—
5413590-8
O Crimp
Gold
Nickel
Polyethelene
Commercial
36.83 1.450 34.93 1.375
318451-2
—
5221221-5
AT&T KS 19224 L2, RD179 Double Braid
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
36.83 1.450
58425-2
—
5413590-4
BELDEN 8218
Hex Crimp
Gold
Nickel
Polyethelene
Commercial
36.83 1.450
58425-2
—
5413590-3
O Crimp
Gold
Nickel
Polyethelene
Commercial
34.93 1.375
58536-1
58248-2
5221221-2
O Crimp
Gold
Nickel
Polyethelene
Commercial
34.93 1.375
58536-1
58248-2
5221221-7
O Crimp
Gold
Nickel
Polyethelene
Commercial
34.93 1.375
58536-1
—
5221221-1
140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, Times FM-59 (RG 59 Type with 20 AWG C.C.) BELDEN 9114, 9248
Part No.
AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
70 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued) Bulkhead Solder Jacks Front Mount
Accepts .054 Dia. Max. Wire
27.43 Max. [1.083]
Plating
27.43 [ 1.083]
Accepts .054 Dia. Max. Wire
Max.
Body — Nickel Center Contact — Silver 3/8-32 Thread 3/8-32 Thread 9.75/9.65 [.384./380] Dia.
13.09 Dia. [.515] Max.
13.09 Dia. [.515] Max.
Part No. 5415187-1
Part No. 5221244-1
(without Solder Terminal)
(with Solder Terminal)
Note: If insulating bushing required use part no. 227223-1 or 221951-1 (for details, reference page 55).
Note: If insulating bushing required use part no. 227223-1 or 221951-1 (for details, reference page 55).
4.04/3.96 [.159/.156] Maximum Panel Thickness 3.18 [.125]
Recommended Panel Cutout
Bulkhead Jack PC Board Mount
3.30 [.130]
Ø 12.70 ± 0.1 [.500 ± .004]
11.07 Max. [.436]
20.8 [.820]
11.2 ± 0.1 [.441 ± .004]
Part No. 6274086-1
Bulkhead Solder Jack Rear Mount
Accepts . .050 Dia. Max. WIre
Lockwasher and Jam Nut see page 73.
17.78 Dia. [.700] Max.
1/2-28 Thread
+0.13
12.83 -0.00 Dia. [.505 +.005 ] -.000
Plating Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene
+0.08
5.54 -0.00 [.218 +.003 ]
31.75 Max. [ 1.250]
-.000
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout Part No. 5414217-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
71 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued) Right-Angle Jacks PC Board/Panel Mount
VALOX Body
Metal Body
1/2-28 Threads
1/2-28 Threads C Mtg. Hgt.
C Mtg. Hgt.
Outer Shell — Nickel Dielectric — Polymethylpentene Lockwasher and Jam Nut see page 73. C L
C L
A
B
+0.13
12.83 -0.00 Dia. [.505 +.005 ]
Body Material
-.000
L
+0.13 5.54 -0.00 [.218 +.005 ] -.000
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Recommended PC Board Layouts
Without Mounting Posts 10.16 ±0.08 [.400 ±.003]
2.64 [.104] Dia. Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes)
5.08 ±0.05 [.200 ±.002]
5.08 ±0.05 [.200 ±.002] G 2.54 ±0.05 [.100 ±.002]
S
Mating Face
0.89 ±0.08 [.035 ±.003]
(Top View)
With Mounting Posts 10.16 ±0.08 [.400 ±.003]
2.01 ±0.08 [.079 ±.003] (2 Holes)
5.08 ±0.05 [.200 ±.002] 5.08 ±0.05 Mating [.200 ±.002] Face G 2.54 [.100
±0.05 ±.002]
S
0.89 ±0.08 [.035 ±.003]
(Top View)
A
B
34.93 [1.375]
VALOX, Black w/ Compliant Posts (Economy)* VALOX, Black (Economy)* VALOX, White VALOX, White (Economy)* VALOX, Black
Part No. Without With Mounting Posts Mounting Posts * — 5415105-2
Center Contact Plating
A
Gold3
6.17 .243
21.21 .835
11.68 .460
2.79 .110
Gold3
6.17 .243
21.21 .835
11.68 .460
4.01 .158
* —
5415105-1
Gold1
6.91 .272
21.21 .835
13.88 .519
3.48 .137
—
5413194-1 5415634-2
Dimensions B C
L
Gold1
6.91 .272
21.21 .835
13.88 .519
3.48 .137
* —
Gold1
6.91 .272 6.91 .272 8.59 .338 8.59 .338 8.25 .325 8.25 .325 8.25 .325 6.91 .272 8.56 .337 8.25 .325 6.91 .272 6.91 .272 6.91 .272
21.21 .835 21.21 .835 21.21 .835 21.21 .835 20.83 .820 20.83 .820 20.83 .820 20.83 .820 21.21 .835 20.83 .820 20.83 .820 20.83 .820 20.83 .820
13.88 .519 13.88 .519 15.88 .625 15.88 .625 15.88 .625 15.88 .625 15.88 .625 12.70 .500 15.88 .625 15.88 .625 12.70 .500 12.70 .500 12.70 .500
3.48 .137 3.48 .137 3.48 .137 3.48 .137 2.16 .085
—
5413194-2
—
5415634-1
—
5415633-1
—
5414459-1
—
5222092-1
—
5222093-1
—
3.48 .137 3.48 .137 3.48 .137 3.48 .137 3.48 .137
—
5414409-1
—
5415417-1
—
5415419-1
—
5222092-3
—
5414907-1
—
6274072-1
—
3.48 .137
—
6274084-1
Gold1
VALOX, Black (Economy)*
Gold1
VALOX, White
Gold2
Metal
Gold1
Metal
Gold1
Metal (Economy)*
Gold1
Metal with Compliant Posts (Economy)*
Gold1
Metal
Gold1
Metal
Gold1
Metal
Gold1
Metal (Economy)*
34.93 [1.375]
Tin
Gold1
**Economy connector uses 50 Ω part with smaller dielectric and stamped and formed contact, Phosphor Bronze contact material (Compare to regular connector which is 75 Ω, screw machined Beryllium Copper). Plating: Gold1 — 0.00076 [.000030] thick Gold2 — 0.00127 [.000050] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54.
* Screw for panel thickness of 2.38 [3/32] or greater * Part No. 221108-2. * Screw for panel thickness of less than 2.38 [3/32] * Part No. 221108-4. VALOX is a trademark of General Electric Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
72 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued) Vertical Jacks PC Board/Panel Mount
VALOX Body
Metal Body L
Plating
L
1/2-28 Thread
1/2-28 Thread
15.88 [.625]
Outer Shell — Nickel Dielectric — Polymethylpentene
B
15.88 [.625]
B
34.93 [1.375] Mtg. Hgt.
34.93 [1.375] Mtg. Hgt.
+0.13
12.83 -0.00 Dia. [.505 +.005 ] -.000
5.54 [.218
+0.13 -0.00 +.005 ] -.000
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Contact Plating
Dim. B
Dim. L
Part No.
Gold1
21.21 .835
3.48 .137
5415632-1
Gold1
21.21 .835
3.48 .137
5415632-2
Metal
Gold1 Tin
3.48 .137 3.48 .137
5222132-1
Metal (Economy)*
20.83 .820 21.21 .835
5415520-1
*Economy connector uses 50 Ω part with smaller dielectric and stamped and formed contact, Phosphor Bronze contact material (Compare to regular connector which is 75 Ω, screw machined Beryllium Copper). Plating: Gold1 — 0.00076 [.000030] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54.
Lockwasher and Jam Nut
Part No. 1-329632-2
Body Material VALOX, Black (Economy)* VALOX, White (Economy)*
Part No. 1-329631-2
2.01 ±0.08 [.079 ±.003] (2 Holes)
5.08 ±0.05 [.200 ±.002]
* Screw for panel thickness of 2.38 [3/32] or greater * Part No. 221108-2. * Screw for panel thickness of less than 2.38 [3/32] * Part No. 221108-4.
2.54 ±0.05 [.100 ±.002]
10.16 ±0.08 [.400 ±.003] G S 10.16 ±0.08 [.400 ±.003]
5.08 ±0.05 [.200 ±.002]
0.89 ±0.08 [.035 ±.003]
(Top View)
Recommended PC Board Layout
VALOX is a trademark of General Electric Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
73 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued) Vertical Metalized Jacks PC Board Mount
Style A
Style B
Style C
L
L
L
Plating Dielectric — TEFLON
17.45 Sq. [.687]
20.57 [.810]
16.64 [.655]
15.88 [.625]
6.88 ±0.08 [.271 ±.003]
12.7 ±0.08 [.500 ±.003] 6.35 ±0.05 [.250 ±.002]
3.44 ±0.08 [.135 ±.003]
1.50 ±0.08 [.059 ±.003] Dia. (4 Holes)
6.35 ±0.05 [.250 ±.002]
1.02 ±0.08 [.040 ±.003] Dia.
5.16 ± 0.08 [.203 ± .003]
1.02 ± 0.08 Dia. [.040 ± .003]
14.73 [.580] 5.16 ± 0.08 [.203 ± .003]
2.54 5 Plcs. [.100]
Press Fit Vertical Metalized Jacks PC Board Mount
2.44 ±0.08 Dia. [.096 ±.003] (4 Holes)
1.32 ±0.08 Dia. [.052 ±.003]
3.43 ±0.08 [.135 ±.003]
Recommended PC Board Layout
Style F (Push-On) 2.578 ± 0.076 [.1015 ± .0030]
3.43 ±0.05 [.135 ±.002]
6.88 ±0.05 6.88 ±0.08 [.271 ±.003] [.271 ±.003]
12.7 ±0.08 [.500 ±.003]
Drill Holes for 0.94 ±0.05 [.037 ± .002 ] Dia. Pin (5 Places)
6.88 ±0.05 [.271 ±.003]
2.06 ± 0.05 Dia. [.081 ± .002] 4 Plcs.
11.49 Dia. [.470] Max.
Body Plating
Center Contact Plating
Style
Nickel
Gold
B
Tin
Gold
B
Tin
Gold
B
Tin
Gold
C
Nickel
Silver
A
Tin
Gold
F
Leg Length L 3.30 .130 3.30 .130 6.35 .250 4.44 .175 6.35 .250 2.54 .100
Part No. 6274291-2 6274291-1 6274359-1 5414394-1 5413986-1 6274360-1
6.88 ±0.1 [.271 +.003] –.004
3.43 [.135
6.88 [.271
±0.05 ±.002]
1.5 ±0.1 Dia. [.059 +.004] –.003
(4 Plated-Thru Holes)
±0.05 ±.002]
1.02 ±0.08 Dia. [.040 ±.003] (Plated-Thru Hole)
A Max.
Dim. A 20.57 .810 16.26 .640
Part No. 5222462-1 5414088-1
Recommended PC Board Layout
Insulating Bushing Material — Nylon Part No. 222163-1 Only to be used on Part Nos. 5222462-1 and 5222006-1 TEFLON is a trademark of E.I. Dupont de Nemours and Company.
14.61 Dia. [.575]
11.94 [.470] Dia.
2.96 Max. [.115] 6.61 Max. [.260]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
74 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued) Press Fit Vertical Metalized Jacks PC Board Mount
1.7 ±0.05 Dia. [.067 ±.002] (2 Places) For Drive Screw
17.48 Sq. [.688]
(Continued)
12.7 ±0.05 [.500 ±.002]
PC Board Thickness (Min.) 2.36 .093 3.17 .125
6.35 ±0.05 [.250 ±.002] ±0.08 ±.003]
1.02 [.040 (Plated-Thru Hole 3 Places)
Part No. 5221336-3 5221336-4
12.7 ±0.05 [.500 ±.002]
15.88 Max. [.625]
6.35 ±0.05 [.250 ±.002]
Recommended PC Board Layout
Press Fit, Bulkhead Vertical Metalized Jack
6.88 [.271]
4.37 ± 0.51 [.172 ± .020] 5 Plcs.
10.80 [.425]
includes hardware
3.43 [.135]
3.43 [.135]
ø 12.83 + 0.13 – 0.00
[ø .505 + .005] – .000
28.78 [1.133]
24.41 [.961]
6.88 [.271]
5.54 + 0.08 – 0.00 [.218 + .003] – .000
Ø 1.02 ± 0.08 [.040 ± .003] Holes Plated Through 5 Plcs.
Part No. 6274124-2
Recommended PC Board Layout
Right-Angle Metalized Jacks PC Board Mount 10.97 [.432] Mounting Height
C L
6.15 [.242]
28.4 Max. [1.118]
6.6 ± 0.08 [.260 ± .003] 3.3 ± 0.08 [.130 ± .003]
6.6 ± 0.08 [.260 ± .003]
2.11 ± 0.08 [.083 ± .003] Dia. (4 holes)
Body Plating
Dielectric
Contact Plating
Nickel Tin Nickel Nickel
TPX TEFLON TPX TPX
Gold2 Gold2 Gold2 Gold1
Center Contact Dimension .171 [.007] .171 [.007] .131 [.005] .171 [.007]
Part No. 5413558-1 5413558-2 5413558-3 5413558-5
Gold1 — 0.00076 [.000030] thick Gold2 — 0.00127 [.000050] thick
1.17 ± 0.08 Dia. [.046 ± .003]
Maximum PC Board Thickness 2.54 [.100]
Recommended PC Board Layout 11.43 ± 0.43 [.450 ± .017]
3.81 ± 0.08 [.150 ± .003] 11.07 Max. [.436]
17.78 [.700]
TEFLON is a trademark of E.I. Dupont de Nemours and Company. TPX is a trademark of Mitsui Chemicals America, Inc.
7.62 ± 0.08 [.300 ± .003]
21.84 [.860] 25.40 ± 0.38 [1.000 ± .015]
1.19 ± 0.18 Dia. [.047 ± .007]
7.62 ± 0.08 [.300 ± .003]
1.78 ± 0.08 Dia. [.070 ± .003]
Part No. 6274127-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
75 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued) 27.64 ± 0.51 [1.088 ±.020]
Right-Angle Metalized Jacks PC Board/Panel Mount
12.83+0.13 -0.00
[.505+.005] -.000
Dia.
6.15 ± 0.25 [.242 ±.010] 11.66 [.459]
10.97 ± 0.18 [.432 ±.007] 5.64+0.08 -0.00
[.222+.003] -.000
1/2-28 Thread 4.34 [.171]
Body Plating Tin
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
Dielectric
Part No.
TEFLON
6274425-2
Bulkhead Jack-Jack Adapter
Right-Angle Adapter
Plating
Plating
Body — Nickel Center Contact —Gold Dielectric — Polymethylpentene
Body — Nickel Center Contact —Gold Dielectric — Polymethylpentene
(Jack-Plug)
12.83+0.13
-0.00 [.505+.005] -.000
14.53 Dia. [.572] Max.
Dia.
22.89 [.901] Max.
5.54+0.08
-0.00 [.218+.003] -.000
36.07 [1.420]
11/16
26.97 [1.062]
Maximum Panel Thickness 6.35 [.250]
Part No. 5222117-1
Recommended Panel Cutout
Bulkhead Jack-Jack Adapter
Part No. 5415020-1
Jack-Jack Adapter Plating
Plating
Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene
Body — Nickel Center Contact — Gold Dielectric — Polymethylpentene
36.04 Max. [1.419]
12.83+0.13
36.07 Max. [1.420]
-0.00 [.505+.005] -.000
Dia. Ø 15.88 ± 0.25 [.625 ± .010] 5.54+0.08 -0.00
Recommended Panel Cutout
[.218+.003] -.000
Part No. 415567-1
Part No. 1274935-1 TEFLON is a trademark of E.I. Dupont de Nemours and Company.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
76 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued) Bulkhead Jack-Push On Plug Adapter
0.13 Ø 9.65 +– 0.00 + .005 [.380 – .000 ]
Ø 8.43 Max. [.332]
8.89 ± 0.13 [.350 ± .005]
Ø 14.35 Max. [.565]
41.92 [1.650]
Recommended Panel Cutout
Part No. 1274007-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
77 Catalog 1307191 Revised 3-07 www.tycoelectronics.com
Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803
South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208
