Transcript
130G Engine
130G Base engine for use in the U.S., U.S. Territories, and Canada John Deere PowerTech™ PWX EPA Interim Tier 4/EU Stage IIIB 72 kW (97 hp) at 2,000 rpm 4 4.5 L (275 cu. in.) 70% (35 deg.) Turbocharged, air-to-air charge-air cooler
Optional engine for use outside the U.S. and U.S. Territories Manufacturer and Model John Deere 4045H Non-Road Emissions Standard EPA Tier 3/EU Stage IIIA Net Rated Power (ISO 9249) 69 kW (93 hp) at 2,000 rpm Cylinders 4 Displacement 4.5 L (275 cu. in.) Off-Level Capacity 70% (35 deg.) Aspiration Turbocharged, air-to-air charge-air cooler Cooling Cool-on-demand hydraulic-driven, suction-type fan with remote-mounted drive Powertrain 2-speed propel with automatic shift Maximum Travel Speed Low 3.3 km/h (2.1 mph) High 5.5 km/h (3.4 mph) Drawbar Pull 11 217 kg (24,729 lb.) Hydraulics Open center, load sensing Main Pumps 2 variable-displacement axial-piston pumps Maximum Rated Flow 105 L/m (28 gpm) x 2 Pilot Pump One gear Maximum Rated Flow 32.9 L/m (8.7 gpm) Pressure Setting 3930 kPa (570 psi) System Operating Pressure Circuits Implement 34 336 kPa (4,980 psi) Travel 34 336 kPa (4,980 psi) Swing 32 300 kPa (4,685 psi) Power Boost 36 300 kPa (5,265 psi) Controls Pilot levers, short stroke, low-effort hydraulic pilot controls with shutoff lever Cylinders Bore Rod Diameter Stroke Boom (2) 105 mm (4.13 in.) 70 mm (2.76 in.) 940 mm (37.00 in.) Arm (1) 115 mm (4.53 in.) 80 mm (3.15 in.) 1135 mm (44.70 in.) Bucket (1) 100 mm (3.94 in.) 70 mm (2.76 in.) 874 mm (34.40 in.) Electrical Number of Batteries (12 volt) 2 Battery Capacity 1,400 CCA Alternator Rating 100 amp Work Lights 2 halogen (one mounted on boom, one on frame) Undercarriage Rollers (each side) Carrier 1 Track 7 Shoes, Triple Semi-Grousers (each side) 44 Track Adjustment Hydraulic Guide Front idler Chain Sealed and lubricated Ground Pressure Without Blade With Blade 600-mm (24 in.) Triple Semi-Grouser Shoes 34 kPa (4.99 psi) 37 kPa (5.39 psi) 700-mm (28 in.) Triple Semi-Grouser Shoes 30 kPa (4.34 psi) 32 kPa (4.70 psi) 600-mm (24 in.) Rubber Crawler Pad 34 kPa (4.91 psi) 37 kPa (5.31 psi)
14 15
CENTERLINE OF SWING
Swing Mechanism 130G Speed 13.3 rpm Torque 34 000 Nm (25,000 lb.-ft.) Serviceability Refill Capacities Fuel Tank 280 L (74 gal.) Cooling System 23.5 L (24.8 qt.) Engine Oil with Filter 14.5 L (15 qt.) Hydraulic Tank 69 L (18.2 gal.) Hydraulic System 185 L (48.9 gal.) Gearbox Swing 3.2 L (3.4 qt.) Propel (each) 4.0 L (4.2 qt.) Operating Weights With full fuel tank; 79-kg (175 lb.) operator; 914-mm (36 in.), 0.50-m3 (0.65 cu. yd.), 414-kg (913 lb.) general-purpose bucket; 3.01-m (9 ft. 11 in.) arm; and 2400-kg (5,291 lb.) counterweight Operating Weights Without Blade With Blade 600-mm (24 in.) Triple Semi-Grouser Shoes 13 288 kg (29,269 lb.) 14 365 kg (31,641 lb.) 700-mm (28 in.) Triple Semi-Grouser Shoes 13 388 kg (29,489 lb.) 14 481 kg (31,896 lb.) 600-mm (24 in.) Rubber Crawler Pad 13 088 kg (28,828 lb.) 14 165 kg (31,200 lb.) Component Weights Undercarriage Without Blade With Blade 600-mm (24 in.) Triple Semi-Grouser Shoes 4304 kg (9,480 lb.) 5381 kg (11,852 lb.) 700-mm (28 in.) Triple Semi-Grouser Shoes 4490 kg (9,890 lb.) 5583 kg (12,297 lb.) 600-mm (24 in.) Rubber Crawler Pad 4190 kg (9,229 lb.) 5267 kg (11,601 lb.) One-Piece Boom (with arm cylinder) 988 kg (2,176 lb.) Arm with Bucket Cylinder and Linkage 2.52 m (8 ft. 3 in.) 431 kg (949 lb.) 3.01 m (9 ft. 11 in.) 501 kg (1,104 lb.) Boom-Lift Cylinders (2), Total Weight 436 kg (960 lb.) 914-mm (36 in.), 0.50-m3 (0.65 cu. yd.) Bucket 414 kg (913 lb.) Counterweight, Standard 2400 kg (5,291 lb.) Operating Dimensions Arm Length 2.52 m (8 ft. 3 in.) 3.01 m (9 ft.11 in.) Arm Digging Force E SAE 65 kN (14,611 lb.) 59 kN (13,167 lb.) ISO 67 kN (15,066 lb.) 60 kN (13,521 lb.) Bucket Digging Force SAE 85 kN (19,015 lb.) 85 kN (19,015 lb.) ISO 96 kN (21,480 lb.) 96 kN (21,480 lb.) Lifting Capacity Over Front at Ground Level 2654 kg (5,850 lb.) 2631 kg (5,800 lb.) C D 6.1-m (20 ft. 0 in.) Reach (with power boost) A Maximum Reach 8.32 m (27 ft. 4 in.) 8.79 m (28 ft. 10 in.) A| Maximum Reach at Ground Level 8.20 m (26 ft. 11 in.) 8.67 m (28 ft. 5 in.) B Maximum Digging Depth 5.57 m (18 ft. 3 in.) 6.06 m (19 ft. 11 in.) GROUND LINE B| Maximum Digging Depth at 2.44-m 5.35 m (17 ft. 7 in.) 5.88 m (19 ft. 3 in.) (8 ft. 0 in.) Flat Bottom A' G C Maximum Cutting Height 8.60 m (28 ft. 3 in.) 8.93 m (29 ft. 4 in.) A D Maximum Dumping Height 6.19 m (20 ft. 4 in.) 6.52 m (21 ft. 5 in.) F E Minimum Swing Radius 2.40 m (7 ft. 10 in.) 2.62 m (8 ft. 7 in.) B B' F Maximum Vertical Wall 5.02 m (16 ft. 6 in.) 5.50 m (18 ft. 1 in) G Tail-Swing Radius 2.19 m (7 ft. 2 in.) 2.19 m (7 ft. 2 in.)
Machine Dimensions A Overall Length with Arm 2.52 m (8 ft. 3 in.) 3.01 m (9 ft. 11 in.) B Overall Height with Arm 2.52 m (8 ft. 3 in.) 3.01 m (9 ft. 11 in.) C Rear-End Length/Swing Radius D Distance Between Idler/Sprocket Centerline E Undercarriage Length F Counterweight Clearance G Upperstructure Width H Cab Height I Track Width with Triple Semi-Grouser Shoes J Gauge Width K Ground Clearance L Overall Width with Triple Semi-Grouser Shoes 600 mm (24 in.) 700 mm (28 in.) M Blade Lift Height N Blade Cut Below Grade O Blade Lift Angle Blade Length Blade Height Blade Width with Triple Semi-Grouser Shoes 600 mm (24 in.) 700 mm (28 in.)
130G 7.70 m (25 ft. 3 in.) 7.71 m (25 ft. 4 in.) 2.87 m (9 ft. 5 in.) 2.87 m (9 ft. 5 in.) 2.19 m (7 ft. 2 in.) 2.88 m (9 ft. 5 in.) 3.58 m (11 ft. 9 in.) 840 mm (33 in.) 2.46 m (8 ft. 1 in.) 2.79 m (9 ft. 2 in.) 600 mm (24 in.) / 700 mm (28 in.) 1.99 m (6 ft. 6 in.) 410 mm (16 in.) 2.59 m (8 ft. 6 in.) 2.69 m (8 ft. 10 in.) 523 mm (21 in.) 488 mm (19 in.) 27 deg. 2.51 m (8 ft. 3 in.) 523 mm (21 in.) 2590 mm (8 ft. 6 in.) 2690 mm (8 ft. 10 in.)
G
C
F H
B
K J L
M
O
D
I A
E
N
Lift Capacities Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped with 414-kg (913 lb.) bucket, standard counterweight, and standard gauge; and situated on firm, level, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities are based on ISO 10567 (with power boost). Load Point Height 1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.) Horizontal Distance from Centerline of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side With 2.52-m (8 ft. 3 in.) arm and 600-mm (24 in.) triple semi-grouser shoes, without blade 4.5 m 3250 3250 2950 1950 (15 ft.) (7,050) (7,050) (6,000) (4,150) 3.0 m 5550 5550 4050 3100 2850 1900 (10 ft.) (11,900) (11,900) (8,700) (6,700) (6,150) (4,050) 1.5 m 7750 5400 4450 2900 2750 1800 (5 ft.) (17,700) (11,700) (9,550) (6,200) (5,950) (3,850) Ground 6150 5150 4250 2700 2700 1700 Line (14,350) (11,000) (9,150) (5,850) (5,750) (3,700) –1.5 m 4300 4300 8700 5100 4200 2650 2650 1700 (–5 ft.) (9,650) (9,650) (18,650) (10,950) (9,000) (5,700) (5,700) (3,650) –3.0 m 8200 8200 7550 5200 4250 2700 (–10 ft.) (18,550) (18,550) (16,250) (11,150) (9,100) (5,800)
16 17
Lift Capacities (continued)
130G
Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped with 414-kg (913 lb.) bucket, standard counterweight, and standard gauge; and situated on firm, level, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities are based on ISO 10567 (with power boost). Load Point Height 1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.) Horizontal Distance from Centerline of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side With 2.52-m (8 ft. 3 in.) arm and 600-mm (24 in.) triple semi-grouser shoes, blade on ground 4.5 m 3250 3250 3000 2150 (15 ft.) (7,050) (7,050) (6,000) (4,550) 3.0 m 5550 5550 4050 3350 3450 2050 (10 ft.) (11,900) (11,900) (8,700) (7,250) (7,500) (4,450) 1.5 m 7750 5900 5000 3150 3850 2000 (5 ft.) (17,700) (12,700) (10,850) (6,750) (8,300) (4,250) Ground 6150 5600 5700 2950 4150 1900 Line (14,350) (12,000) (12,300) (6,400) (8,950) (4,100) –1.5 m 4300 4300 8850 5550 5750 2900 4050 1850 (–5 ft.) (9650) (9650) (19,150) (11,950) (12,450) (6,250) (8,750) (4,050) –3.0 m 8200 8200 7550 5650 5000 2950 (–10 ft.) (18,550) (18,550) (16,250) (12,150) (10,700) (6,350) With 2.52-m (8 ft. 3 in.) arm and 700-mm (28 in.) triple semi-grouser shoes, without blade 4.5 m 3250 3250 3000 2000 (15 ft.) (7,050) (7,050) (6,000) (4,250) 3.0 m 5550 5550 4050 3150 2900 1900 (10 ft.) (11,900) (11,900) (8,700) (6,800) (6,250) (4,100) 1.5 m 7750 5500 4500 2900 2800 1850 (5 ft.) (17,700) (11,850) (9,700) (6,300) (6,050) (3,950) Ground 6150 5200 4350 2750 2750 1750 Line (14,350) (11,200) (9,300) (5,950) (5,850) (3,750) –1.5 m 4300 4300 8850 5200 4250 2700 2700 1700 (–5 ft.) (9,650) (9,650) (18,900) (11,100) (9,150) (5,800) (5,800) (3,700) –3.0 m 8200 8200 7550 5300 4300 2750 (–10 ft.) (18,550) (18,550) (16,250) (11,350) (9,250) (5,900) With 2.52-m (8 ft. 3 in.) arm and 700-mm (28 in.) triple semi-grouser shoes, blade on ground 4.5 m 3250 3250 3000 2150 (15 ft.) (7,050) (7,050) (6,000) (4,650) 3.0 m 5550 5550 4050 3400 3450 2100 (10 ft.) (11,900) (11,900) (8,700) (7,350) (7,500) (4,500) 1.5 m 7750 5950 5000 3200 3850 2000 (5 ft.) (17,700) (12,850) (10,850) (6,850) (8,300) (4,300) Ground 6150 5650 5700 3000 4150 1950 Line (14,350) (12,200) (12,300) (6,500) (8,950) (4,150) 4300 4300 8850 5650 5750 2950 4050 1900 –1.5 m (–5 ft.) (9,650) (9,650) (19,150) (12,100) (12,450) (6,350) (8,750) (4,100) –3.0 m 8200 8200 7550 5750 5000 3000 (–10 ft.) (18,550) (18,550) (16,250) (12,300) (10,700) (6,450) With 2.52-m (8 ft. 3 in.) arm and 600-mm (24 in.) rubber crawler pads, without blade 4.5 m 3250 3250 3000 2000 (15 ft.) (7,050) (7,050) (6,000) (4,250) 3.0 m 5550 5550 4050 3150 2900 1950 (10 ft.) (11,900) (11,900) (8,700) (6,800) (6,250) (4,150) 1.5 m 7750 5500 4550 2900 2800 1850 (5 ft.) (17,700) (11,900) (9,750) (6,300) (6,050) (3,950) Ground 6150 5200 4350 2750 2750 1750 Line (14,350) (11,200) (9,350) (5,950) (5,900) (3,750) –1.5 m 4300 4300 8850 5200 4250 2700 2700 1750 (–5 ft.) (9,650) (9,650) (18,950) (11,150) (9,200) (5,800) (5,800) (3,700) –3.0 m 8200 8200 7550 5300 4300 2750 (–10 ft.) (18,550) (18,550) (16,250) (11,350) (9,300) (5,900) With 2.52-m (8 ft. 3 in.) arm and 600-mm (24 in.) rubber crawler pads, blade on ground 4.5 m 3250 3250 3000 2150 (15 ft.) (7,050) (7,050) (6,000) (4,650) 3.0 m 5550 5550 4050 3400 3450 2100 (10 ft.) (11,900) (11,900) (8,700) (7,350) (7,500) (4,500) 1.5 m 7750 6000 5000 3200 3850 2000 (5 ft.) (17,700) (12,850) (10,850) (6,850) (8,300) (4,350) Ground 6150 5700 5700 3000 4150 1950 Line (14,350) (12,200) (12,300) (6,500) (8,950) (4,150) –1.5 m 4300 4300 8850 5650 5750 2950 4050 1900 (–5 ft.) (9,650) (9,650) (19,150) (12,100) (12,450) (6,350) (8,750) (4,100) –3.0 m 8200 8200 7550 5750 5000 3000 (–10 ft.) (18,550) (18,550) (16,250) (12,350) (10,700) (6,450)
Lift Capacities (continued)
130G
Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped with 414-kg (913 lb.) bucket, standard counterweight, and standard gauge; and situated on firm, level, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities are based on ISO 10567 (with power boost). Load Point Height 1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.) Horizontal Distance from Centerline of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side With 3.01-m (9 ft. 11 in.) arm and 600-mm (24 in.) triple semi-grouser shoes, without blade 4.5 m 2750 2750 2800 2000 (15 ft.) (6,000) (6,000) (6,200) (4,250) 3.0 m 4550 4550 3550 3150 2900 1900 (10 ft.) (9,600) (9,600) (7,750) (6,800) (6,200) (4,100) 1.5 m 5550 4550 2900 3550 1800 2900 1200 (5 ft.) (15,850) (12,000) (9,650) (6,250) (5,950) (3,850) Ground 6750 5150 4250 2700 2650 1700 Line (15,750) (11,000) (9,150) (5,800) (5,750) (3,650) –1.5 m 3750 3750 8550 5000 4150 2600 2600 1650 (–5 ft.) (8,450) (8,450) (18,450) (10,750) (8,900) (5,600) (5,600) (3,550) –3.0 m 6800 6800 8100 5050 4150 2600 2650 1650 (–10 ft.) (15,400) (15,400) (17,450) (10,900) (8,950) (5,600) –4.5 m 5750 5300 3400 2750 (–15 ft.) (12,150) (11,350) With 3.01-m (9 ft. 11 in.) arm and 600-mm (24 in.) triple semi-grouser shoes, blade on ground 4.5 m 2750 2750 2800 2150 (15 ft.) (6,000) (6,000) (6,200) (4,650) 3.0 m 4550 4550 3550 3400 3100 2100 (10 ft.) (9,600) (9,600) (7,750) (7,350) (6,800) (4,450) 1.5 m 7400 6050 4650 3150 3600 2000 1900 1300 (5 ft.) (15,850) (13,000) (10,000) (6,800) (7,800) (4,250) Ground 6750 5600 5450 2950 4000 1900 Line (15,750) (12,000) (11,800) (6,350) (8,650) (4,050) –1.5 m 3750 3750 8550 5450 5750 2850 4100 1850 (–5 ft.) (8,450) (8,450) (19,550) (11,750) (12,400) (6,150) (8,850) (3,950) –3.0 m 6800 6800 8100 5550 5300 2850 3500 1850 (–10 ft.) (15,400) (15,400) (17,450) (11,850) (11,400) (6,150) –4.5 m 5750 5750 3400 3000 (–15 ft.) (12,150) (12,150) With 3.01-m (9 ft. 11 in.) arm and 700-mm (28 in.) triple semi-grouser shoes, without blade 4.5 m 2750 2750 2800 2000 (15 ft.) (6,000) (6,000) (6,200) (4,300) 3.0 m 4550 4550 3550 3200 2950 1950 (10 ft.) (9,600) (9,600) (7,750) (6,900) (6,300) (4,150) 2950 2800 1850 1900 1200 1.5 m 7400 5650 4550 (9,800) (6,350) (6,050) (3,900) (5 ft.) (15,850) (12,150) Ground 6750 5200 4350 2750 2700 1750 Line (15,750) (11,200) (9,300) (5,900) (5,800) (3,700) –1.5 m 3750 3750 8550 5100 4200 2650 2650 1700 (–5 ft.) (8,450) (8,450) (18,700) (10,950) (9,050) (5,700) (5,700) (3,600) –3.0 m 6800 6800 8100 5150 4200 2650 2700 1700 (–10 ft.) (15,400) (15,400) (17,450) (11,050) (9,100) (5,700) –4.5 m 5750 5350 3400 2800 (–15 ft.) (12,150) (11,550) With 3.01-m (9 ft. 11 in.) arm and 700-mm (28 in.) triple semi-grouser shoes, blade on ground 4.5 m 2750 2750 2800 2200 (15 ft.) (6,000) (6,000) (6,200) (4,700) 3.0 m 4550 4550 3550 3450 3100 2100 (10 ft.) (9,600) (9,600) (7,750) (7,450) (6,800) (4,550) 1.5 m 7400 6100 4650 3200 3600 2000 1900 1350 (5 ft.) (15,850) (13,150) (10,000) (6,900) (7,800) (4,300) Ground 6750 5650 5450 3000 4000 1900 Line (15,750) (12,200) (11,800) (6,450) (8,650) (4,100) –1.5 m 3750 3750 8550 5550 5750 2900 4100 1850 (–5 ft.) (8,450) (8,450) (19,550) (11,900) (12,400) (6,250) (8,850) (4,000) –3.0 m 6800 6800 8100 5600 5300 2900 3500 1900 (–10 ft.) (15,400) (15,400) (17,450) (12,050) (11,400) (6,250) –4.5 m 5750 5750 3400 3050 (–15 ft.) (12,150) (12,150)
18 19
Lift Capacities (continued)
130G
Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped with 414-kg (913 lb.) bucket, standard counterweight, and standard gauge; and situated on firm, level, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities are based on ISO 10567 (with power boost). Load Point Height 1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.) Horizontal Distance from Centerline of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side With 3.01-m (9 ft. 11 in.) arm and 600-mm (24 in.) rubber crawler pads, without blade 4.5 m 2750 2750 2800 2000 (15 ft.) (6,000) (6,000) (6,200) (4,300) 3.0 m 4550 4550 3550 3200 2950 1950 (10 ft.) (9,600) (9,600) (7,750) (6,900) (6,300) (4,150) 1.5 m 7400 5650 4550 2950 2800 1850 1900 1200 (5 ft.) (15,850) (12,200) (9,800) (6,350) (6,050) (3,900) Ground 6750 5200 4350 2750 2700 1750 Line (15,750) (11,200) (9,300) (5,900) (5,850) (3,700) –1.5 m 3750 3750 8550 5100 4200 2650 2650 1700 (–5 ft.) (8,450) (8,450) (18,750) (10,950) (9,050) (5,700) (5,700) (3,600) –3.0 m 6800 6800 8100 5150 4250 2650 2700 1700 (–10 ft.) (15,400) (15,400) (17,450) (11,050) (9,100) (5,700) –4.5 m 5750 5350 3400 2800 (–15 ft.) (12,150) (11,550) With 3.01-m (9 ft. 11 in.) arm and 600-mm (24 in.) rubber crawler pads, blade on ground 4.5 m 2750 2750 2800 2200 (15 ft.) (6,000) (6,000) (6,200) (4,700) 3.0 m 4550 4550 3550 3450 3100 2100 (10 ft.) (9,600) (9,600) (7,750) (7,450) (6,800) (4,550) 1.5 m 7400 6100 4650 3200 3600 2000 1900 1350 (5 ft.) (15,850) (13,150) (10,000) (6,900) (7,800) (4,300) Ground 6750 5700 5450 3000 4000 1900 Line (15,750) (12,200) (11,800) (6,450) (8,650) (4,100) –1.5 m 3750 3750 8550 5550 5750 2900 4100 1850 (–5 ft.) (8,450) (8,450) (19,550) (11,950) (12,400) (6,250) (8,850) (4,000) –3.0 m 6800 6800 8100 5600 5300 2900 3500 1900 (–10 ft.) (15,400) (15,400) (17,450) (12,050) (11,400) (6,250) –4.5 m 5750 5750 3400 3050 (–15 ft.) (12,150) (12,150)
Buckets
A full line of buckets is offered to meet a wide variety of applications. Digging forces are with power boost. Buckets are equipped with John Deere Fanggs™ or ESCO teeth standard. Replaceable cutting edges and a variety of teeth are available through John Deere Parts. Optional side cutters add 150 mm (6 in.) to bucket widths. Capacities are SAE heaped ratings. Arm Dig Force Arm Dig Force Number Type Bucket Bucket Width Bucket Capacity Bucket Weight Bucket Dig Force 2.52 m (8 ft. 3 in.) 3.01 m (9 ft. 11 in.) Bucket Tip Radius of Teeth cu. yd. kg lb. kN lb. kN lb. kN lb. mm in. mm in. m3 Heavy Duty 610 24 0.37 0.48 460 1,014 84.6 19,015 65.0 14,611 58.6 13,167 1328 52.27 4 Plate Lip 760 30 0.50 0.65 522 1,150 84.6 19,015 65.0 14,611 58.6 13,167 1328 52.27 4 915 36 0.62 0.81 589 1,297 84.6 19,015 65.0 14,611 58.6 13,167 1328 52.27 5 1065 42 0.76 0.99 631 1,390 84.6 19,015 65.0 14,611 58.6 13,167 1328 52.27 5 Ditching 1500 60 0.63 0.83 457 1,007 121.9 27,411 72.7 16,337 64.6 14,529 921 36.25 0
Bucket Selection Guide*
BUCKET SIZE m3 (cu. yd.)
1.3 (1.75) 1.2 (1.50) 1.0 (1.25)
Deere 2.52-m (8 ft. 3 in.) Arm
0.8 (1.00) 0.6 (0.75)
Deere 3.01-m (9 ft. 11 in.) Arm
0.4 (0.50) 1800
1900
3,400 2000
3,600 2100
Wet Sand, Gravel
Moist Sand
Wet Clay, Granite
3,200
3,000
1700
Wet Sand
2,800
1600
Wet Earth
Limestone
1500
Dry Clay
Shale
2,600
2,400 1400
Dry Sand
2,200 1300
Caliche
Coal
Topsoil
Wet Peat
lb./cu. yd. 1,200 1,400 1,600 1,800 2,000 kg/m3 700 800 900 1000 1100 1200
* Contact your John Deere dealer for optimum bucket and attachment selections. These recommendations are for general conditions and average use. Does not include optional equipment such as thumbs or couplers. Larger buckets may be possible when using light materials, for flat and level operations, less compacted materials, and volume loading applications such as mass-excavation applications in ideal conditions. Smaller buckets are recommended for adverse conditions such as off-level applications, rocks, and uneven surfaces. Bucket capacity indicated is SAE heaped.
Additional equipment Key: l Standard s Optional or special 130G l l l l l l l l l l l l l l l l s s s s l l l l l l l s s s s s s l l l l l l l s s
Engine Auto-idle system Automatic belt-tension device Batteries (2 – 12 volt) Coolant recovery tank Dual-element dry-type air filter Electronic engine control Enclosed fan guard (conforms to SAE J1308) Engine coolant to –37 deg. C (–34 deg. F) Fuel filter with water separator Full-flow oil filter Turbocharger with charge air cooler Cool-on-demand hydraulic-driven fan 500-hour engine-oil-change interval 70% (35 deg.) off-level capability Engine-oil-sampling valve Programmable auto shutdown Chrome exhaust stack Severe-duty fuel filter Hydraulic fan reverser Engine coolant heater Hydraulic System Reduced-drift valve for boom down, arm in Auxiliary hydraulic valve section Spring-applied, hydraulically released automatic swing brake Auxiliary hydraulic-flow adjustments through monitor Auto power lift 5,000-hour hydraulic-oil-change interval Hydraulic-oil-sampling valve Auxiliary hydraulic lines Auxiliary pilot and electric controls Hydraulic filter restriction indicator kit Load-lowering control device Single-pedal propel control Control pattern-change valve Undercarriage Planetary drive with axial piston motors Propel motor shields Spring-applied, hydraulically released automatic propel brake Track guide, front idler 2-speed propel with automatic shift Upper carrier rollers (2) Sealed and lubricated track chain Triple semi-grouser shoes, 600 mm (24 in.) Triple semi-grouser shoes, 700 mm (28 in.)
130G Undercarriage (continued) Rubber crawler pads, 600 mm (24 in.) s Undercarriage with blade s Upperstructure Right-hand, left-hand, and counterweight l mirrors Vandal locks with ignition key: Cab door / l Service doors / Toolbox Debris-screening side panel l Remote-mounted engine oil and fuel filters l Front Attachments Centralized lubrication system l Dirt seals on all bucket pins l Less boom and arm l Oil-impregnated bushings l Reinforced resin thrust plates l Tungsten carbide thermal coating on arm-tol bucket joint Arm, 2.52 m (8 ft. 3 in.) s Arm, 3.01 m (9 ft. 11 in.) s Attachment quick-couplers s Boom cylinder with plumbing to mainframe s less boom and arm Buckets: Ditching / Heavy duty / Heavy-duty s high capacity / Side cutters and teeth Material clamps s Operator’s Station Meets ISO 12117-2 for ROPS l Adjustable independent-control positions l (levers-to-seat, seat-to-pedals) AM/FM radio l Auto climate control/air conditioner/heater/ l pressurizer Built-in Operator’s Manual storage compartl ment and manual Cell-phone power outlet, 12 volt, 60 watt, l 5 amp Coat hook l Deluxe suspension cloth seat with 100-mm l (4 in.) adjustable armrests Floor mat l Front windshield wiper with intermittent speeds l Gauges (illuminated): Engine coolant / Fuel l Horn, electric l Hour meter, electric l Hydraulic shutoff lever, all controls l Hydraulic warm-up control l Interior light l
See your John Deere dealer for further information. 130G l l l
l
l l l l l l l l s s s s s s l l l l
s s l s
Operator’s Station (continued) Large cup holder Machine Information Center (MIC) Mode selectors (illuminated): Power modes (3) / Travel modes (2 with automatic shift) / Work mode (1) Multifunction, color LCD monitor with: Diagnostic capability / Multiple-language capabilities / Maintenance tracking / Clock / System monitoring with alarm features: Auto-idle indicator, engine air cleaner restriction indicator light, engine check, engine coolant temperature indicator light with audible alarm, engine oil pressure indicator light with audible alarm, low-alternator-charge indicator light, low-fuel indicator light, fault code alert indicator, fuelrate display, wiper-mode indicator, work-lightson indicator, and work-mode indicator Motion alarm with cancel switch (conforms to SAE J994) Power-boost switch on right console lever Auxiliary hydraulic control switches in right console lever SAE 2-lever control pattern Seat belt, 51 mm (2 in.), retractable Tinted glass Transparent tinted overhead hatch Hot/cold beverage compartment Air-suspension heated seat 24- to 12-volt D.C. radio convertors, 10 amp Hydraulic oil filter restriction indicator light Protection screens for cab front, rear, and side Seat belt, 76 mm (3 in.), non-retractable Window vandal-protection covers Electrical 100-amp alternator Blade-type multi-fused circuits Positive-terminal battery covers JDLink™ wireless communication system (available in specific countries; see your dealer for details) Rearview camera Cab extension wiring harness Lights Work lights: Halogen / One mounted on boom / One mounted on frame 2 lights mounted on cab / One mounted on right side of boom
Net engine power is with standard equipment including air cleaner, exhaust system, alternator, and cooling fan, at test conditions specified per ISO 9249. No derating is required up to 3050-m (10,000 ft.) altitude. Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with SAE standards. Except where otherwise noted, these specifications are based on a unit with 700-mm (28 in.) triple semi-grouser shoes; full fuel tank; 79-kg (175 lb.) operator; 914-mm (36 in.), 0.50-m3 (0.65 cu. yd.), 414-kg (913 lb.) general-purpose bucket; 3.01-m (9 ft. 11 in.) arm; and 2400-kg (5,291 lb.) counterweight. DKAX130G Litho in U.S.A. (12-06)
www.JohnDeere.com
