Transcript
Engine
Manufacture and Model
John Deere PowerTechTM4045T turbocharged, standard
Non-Road Emission Standards
EPA Tier 2 / EU Stage II emissions
Displacement
4,5 L
Net Peak Power (ISO 9249)
72 kW @ 2 000 rpm
Net Peak Torque (ISO 9249)
392 Nm @ 1 400 rpm
Net Torque Rise
39%
Lubrication
Pressure system with spin-on filter & cooler
Air Cleaner
Dual-stage dry type with safety element and evacuator valve
Cooling
Fan Type
Electronically controlled, variable rate suctiontype cooling fan
Engine Coolant Rating
-40C
Engine Oil Cooler
Oil to water
Transmission
Transmission
5-speed, helical-cut gears, full PowerShiftTM transmission with hydraulic reverser standard; electric clutch cutoff on loader lever
Torque Converter
Single stage, dual phase with 2.631:1 stall ratio, 280 mm
Vehicle Speeds
Maximum Travel Speeds (with 16.9-28 rear Forward tyres)
Reverse
Gear 1
5,8 km/h
7,3 km/h
Gear 2
10,6 km/h
13,3 km/h
Gear 3
21,4 km/h
21,2 km/h
Gear 4
35,2 km/h
N/A
Gear 5
40,0 km/h
N/A
Axles Axles: Axle Oscillations, Stop to Stop, Front axles
22 deg.
Axle Ratings
MFWD
Rear
Static
23 500 kg
26 000 kg
Dynamic
8 500 kg
10 500 kg
Ultimate
37 000 kg
39 500 kg
Differentials MFWD Axle
Automatic, limited slip traction control
Rear Axle
Electric, foot-actuated, 100% hydraulically engaged
Final Drives Mechanical-Front Wheel
Heavy-duty, outboard planetary nal drives distribute shock loads over 3 gears
Rear Axle
Heavy-duty, outboard planetary final drives distribute shock loads over 4 gears
Steering
Steering (ISO 5010)
Hydrostatic power and emergency steering
Axle Type
MFWD
Curb-Turning Radius With Brakes
3,68 m
Without Brakes
4,35 m
Bucket Clearance Circle With Brakes
10,48 m
Without Brakes
11,47 m
Steering Wheel Turns (lock to lock)
2,7
Brakes Brakes (SAE J1473)
Power assisted, hydraulic wet disc
Service
Mounted inboard, self-adjusting and selfequalising
Parking
Spring-applied, hydraulically released, wet, multi disc, independent of service brakes with electric switch control
Hydraulics Main Pump
Open centre, gear type, tandem with unloader
Pump Flow @ 2 200 rpm Backhoe
136 L/min
Loader
106 L/min
System Relief Pressure Backhoe
24 993 kPa
Loader
24 993 kPa
Backhoe Controls
Two-lever manual standard; manual and/or electric auxiliary functions optional
Loader Controls
Single-lever control with electric clutch cut-off switch standard; manual auxiliary functions (electro-hydraulic control lever) optional
Electrical Voltage
12 volt
Alternator Rating
90 amp
Lights
10 halogen, 4 front, 4 rear and 2 side docking (32 500 candlepower each), turn signals and flashers, 2 front and 2 rear, stop and tail-lights and 2 rear reflectors. (LED lighting optional).
Operator Station
Type (SAE J1040)
Cab, isolation mounted, ROPS / FOPS, left/right access, with molded roof. Airconditioner (optional).
Tyres Front Standard
12.5/80-18 I-3 (10)
Heavy Duty MFWD
12.5/80-18 AT (12)
Rear Standard
16.9-28 R-4 (10)
Heavy Duty
17.5-25 L4 (12)
Serviceability Hydraulic Oil Filter, Spin-On Enclosed Replaceable Element
6-micron filtration
Refill Capacities Cooling System
21 L
Rear Axle
18 L
Engine Oil (including vertical spin-on filter)
13 L
Torque Converter and Transmission
15,1 L
Fuel Tank (with ground-level fueling)
140,1 L
Hydraulic System
104,1 L
Hydraulic Reservoir
45 L
Mechanical-Front-Wheel-Drive Housing Axle
6,5 L
Planetary (each)
0,9 L
Operating Weights With Full Fuel Tank, Operator, and Standard Equipment
79 kg
4WD
8 040 kg
Work Pro
9 114 kg
Option Weights
Extendable Dipperstick
222 kg
Front Loader Coupler
286 kg
Backhoe Bucket Coupler
63 kg
Overall Dimensions A
Ground Clearance (minimum)
351 mm
B
Overall Length (transport)
5,26 m (folded); 7,50 m (rear)
C
Stabiliser Spread
2,26 m
D
Height to Top of ROPS/Cab0
2,84 m
Length from Axle to Axle E
Mechanical-Front-Wheel-Drive 2,19 m Axle
Backhoe Dimensions / Performance Backhoe specifications are with 610 mm x 0.21 m³ bucket Bucket Range
305-915 mm
Digging Force Bucket Cylinder
55 kN
Crowd Cylinder
36,6 kN
Swing Arc
180 deg.
Operator Control
Two levers With Standard
With Optional
Dipperstick
Extendable Dipperstick
Backhoe
Retracted
Extended
F
Loading Height (truck loading position)
3,57 m
3,69 m
4,31 m
G
Reach from Centre 5,44 m of Swing Pivot
5,61 m
6,62 m
H
Reach from Centre 6,80 m of Rear Axle
6,98 m
7,98 m
I
Digging Depth (SAE maximum)
4,17 m
4,34 m
5,39 m
J
Digging Depth (SAE) 610 mm Flat Bottom
4.13 m
4,30 m
5,35 m
2440 mm Flat Bottom
3,77 m
3,96 m
5,09 m
K
Overall Width (less 2,43 m loader bucket)
2,41 m
-
L
Side-Shift from Centreline
537 mm
537 mm
537 mm
M
Wall-to-Swing Centreline
604 mm
604 mm
604 mm
N
Bucket Rotation
190 deg.
190 deg.
190 deg.
O
Transport Height
3,63 m
3,63 m
3,63 m
Lift capacities are over-end values in kg according to SAE J31. Figures listed are 87% of the maximum lift force available. Base vehicle includes counterweight.
Loader Dimensions / Performance
P
Bucket Dump Angle (maximum)
45 deg.
Q
Rollback Angle at Ground
40 deg.
Heavy-Duty
Multipurpose
Bucket Capacity
1,00 m³
1,00 m³
Width
2 400 mm
2337 mm
Weight
552 kg
863 kg
Breakout Force
46,8 kN
43,2 kN
Lift Capacity (full height) 3 322 kg
2 834 kg
R
Height to Bucket Hinge 3,45 m Pin (maximum)
3,45 m
S
Dump Clearance (bucket at 45 deg.)
2,68 m
2,65 m
T
Reach at Full Height (bucket at 45 deg.)
695 mm
737 mm
U
Digging Depth Below Ground (bucket level)
151 mm
147 mm
V
Length From Front Axle 2,04 m
2,09 m
Centreline to Bucket Cutting Edge Lift capacities are over-end values in kg according to SAE J31. Figures listed are 87% of the maximum lift force available. Base vehicle includes counterweight.
Dimension Drawings
Dimension Drawings
Lift Capacity With Quick-Coupler / Forks A¹
Maximum Height
2 073 kg
B¹
Maximum Reach
3 162 kg
C¹
At Ground Line
4 145 kg
D¹
Below Ground Line
211 mm
Lift capacities are over-end values in kg according to SAE J31. Figures listed are 87% of the maximum lift force available. Base vehicle includes counterweight.
Lift Capacity with Bucket Drawings
Features and Options ( Standard Option)
Engine
Powertrain
Coolant recovery tank with low-level indicator Serpentine belt with automatic belt tensioner Suction-type cooling fan Self-cleaning exhaust aftertreatment system
Backhoe
PowerShift transmission: Torque converter with twist-grip TCL and neutral safety switch interlock (1st through 5th gears) 5th-gear overdrive Transmission oil cooler Differential lock, electric foot actuated Auto shutdown Planetary final drives Power-assisted hydraulic service brakes (conform to ISO 3450): Inboard, wet multi-disc, selfadjusting and selfequalizing Parking/emergency brake with electric switch control (conforms to ISO 3450): Spring applied, hydraulically released wet multi-disc / Independent of service brakes Hydrostatic power steering with emergency manual mode MFWD with traction-control limited-slip differential: Electric on/off control / Sealed axle Automatic MFWD braking (4th and 5th gear overdrive only)
Loader*
Standard dipperstick: 4,17 m digging depth Extendable dipperstick: 1,06 m extension ISO 2-lever mechanical backhoe controls Backhoe transport lock lever Swing lock pin stored in operator’s station Stabilizers with 2-direction anti-drift valves Auxiliary backhoe valve with auxiliary plumbing for standard or extendable dipper
Hydraulic System
Loader bucket anti-spill (rollback) Return-to-dig feature Single-lever control with electric clutch disconnect Bucket-level indicator Loader boom service lock Auxiliary loader hydraulics with 2-lever control Hydraulic coupler for buckets, forks, etc. Ride control Fold over fork kit
Electrical System
136 L/m (36 gpm) tandem-gear pump, open center system Auto idle Economy mode Dedicated hydraulic reservoir
Lights
12 volt system 90 amp alternator 120 amp alternator Single battery with 190-min. reserve capacity and 925 CCA Dual batteries with 380-min. reserve capacity and 1,850 CCA
Operator's Station
Halogen lights (6), 32 500 candlepower each (4 front driving/ working, 2 rear working) Turn signal/flashing (2 front and 2 rear) Rear stop and tail (2) Deluxe lighting includes 6 front driving, 2 side and 4 rear work lights
Overall Vehicle
Modular-design ROPS/FOPS (Level 2) canopy with moulded roof (meets ISO 3449 and ISO 3471/ SAE J1040): Isolation mounted 12 volt outlet Lockable right-side storage Lockable left-hand storage with cup holders Outside rearview mirrors Rotary-dial hand throttle Suspended foot throttle Tilt steering, infinitely adjustable Keyless start Machine security (enabled through monitor) Digital display of engine hours, engine rpm, and system voltage Sealed-switch module Multi-function lever: Turn signals / Windshield wipers / Some light functionality Monitor system with audible and visual warnings: Engine air restriction / Low alternator voltage / Engine oil pressure / Hydraulic lter restriction / Parking brake on/off / Transmission fluid temperature / Fuel / Hour meter / Machine diagnostic information via 4-push-button/LCD operator interface Cab with Dual Doors: Mechanical suspension deluxe fabric swivel seat with lumbar adjustment / Headliner, dome light, left and right cab doors, tinted safety glass, windshield wipers (1 rear and1 front), front windshield washer, fresh-air intake Airconditioner 7.6 kW (26 000 Btu/h) output and CFC free R134a refrigerant
1-piece unitised construction mainframe Vehicle tie-downs (2 front and 2 rear) Remote grease bank for front axle Heavy-duty front bumper Front counterweight – 204 kg (standard dipper), 454 kg (extended dipper) Rubber grille bumpers Fuel tank, 140,1 L, ground-level fueling Extended grille frame Removable toolbox with padlock hasp Vandal protection for locking monitor, engine hood, toolbox, hydraulic reservoir, and fuel tank Reverse warning alarm Dent-resistant full-coverage rear fenders Backhoe boom-protection plate Fleetm@tic® - the ultimate fleet management system
