Transcript
Final flat size: 20.65 x 5.83 in (524.5 × 148.08 mm) Final fold size: 4.13 x 5.83 in (104.8 × 148.08 mm)
NS-HURSK18_17-0288_QSG_V1.ai 1 7/6/2017 10:01:28 AM
FEATURES
Factory only
DC IN jack
Transmitter
Optical in jack
AUX in jack
SETTING UP YOUR SPEAKER KIT
Remote
Choosing your connection Power button
SURROUND
OPTICAL
Look at your sound source device and choose the connection option that fits your audio source (Digital Optical or AUX).
Mute button
AUX
ON/OFF
SOURCE
PAIR
QUICK SETUP GUIDE
Universal Rear Speaker Kit NS-HURSK18
FIND YOUR USER GUIDE ONLINE! Go to www.insigniaproducts.com, enter NS-HURSK18 in the search box, then press ENTER. Next to Features, click Support & Downloads, then next to User Guide, click the language you want.
5V
1A
AUX indicator LED Volume down & up Source button Dolby indicator LED
Optical indicator LED
IR sensor
Sound & pairing button
Optical out jack
AUX out jack
SURROUND DELAY
SOURCE
SOUND MODE
OPTICAL
REAR
AUX
STEREO
+
+
_
_
DELAY
REAR
VOLUME
SOUND MODE
Note: You can connect several devices and switch the sound source as required.
+
MASTER VOL +/– buttons
Connecting the transmitter
_
MASTER
NS-HURSK18
PCM indicator LED Power indicator • Lights red when the transmitter is in standby mode. • Blinks red when the transmitter is muted. • Turns off when the transmitter is turned on.
Power button
Speakers
Hanging hole
Digital Optical connection (best) 1 Connect one end of the digital optical cable (included) to the Optical In port on the transmitter. 2 Connect the other end into the Digital Optical Output port on your audio source device. 3 Connect one end of another digital optical cable (included) to the Optical Out port on the transmitter. 4 Connect the other end to your soundbar. 5 Change the device's audio output to RAW format (typically found in audio settings). Refer to the documentation that came with your audio source device for more information.
OPTION 1 - AUX connection (good) 1 Connect one end of a 3.5 mm audio cable (included) to the AUX In jack on the transmitter. 2 Connect the other end of the 3.5 mm audio cable into the Audio Output port on your audio source device, such as a tablet or mobile device. 3 Connect one end of another 3.5 mm audio cable (not included) to the Aux Out jack on the transmitter. 4 Connect the other end of the 3.5 mm audio cable to the soundbar.
Back of the transmitter
Receiver DC IN jack
Pairing button
Speaker jacks
Speaker
5V/1A AC adapter
Back of the transmitter Speaker jacks
PACKAGE CONTENTS • • • • • •
Transmitter Receiver Remote control Speakers (2) 10-foot speaker wires (2) 3.5 mm audio cable
• • • • • •
Soundbar
3.5 mm male to RCA female adapter 3.5 mm female to RCA male adapter AC adapter 5V 1A AC adapter 12V 1.5A Optical cable (2) Quick Setup Guide
5V 1A AC adapter Power indicator • Lights red when the receiver is in standby mode. • Blinks blue when the receiver is in pairing mode. • Lights blue when the receiver is on and paired with the transmitter.
Before using your new product, please read these instructions to prevent any damage.
Digital optical cable (included)
3.5 mm Audio Cable
Audio source (TV, Blu-ray, or cable box)
Audio source (tablet or smartphone) Soundbar
NS-HURSK18_17-0288_QSG_V1.ai 2 7/6/2017 10:01:29 AM
OPTION 2 - AUX connection (good), RCA 1 Connect one end of an RCA cable (not included) to your audio source device. 2 Connect the other ends of the RCA cable to the 3.5mm male to RCA female adapter (included), then connect the other end to the AUX In jack on the transmitter. 3 Connect one end of the 3.5 mm audio cable (included) to the AUX Out jack on the transmitter. 4 Connect the other end of the 3.5 mm audio cable to the 3.5 mm female to RCA male adapter (included), then connect the other end to the soundbar. Back of the transmitter
5V/1A AC adapter
3.5 mm cable (included)
RCA to 3.5 mm adapter (included)
Connecting the receiver to the transmitter
USING THE REMOTE CONTROL
REPLACING THE REMOTE CONTROL BATTERY
ONE-YEAR LIMITED WARRANTY
1 Turn on the transmitter and receiver. 2 Press and hold the sound and pairing button on the back of the transmitter for three seconds (the receiver blinks blue when it is in pairing mode. It lights solid blue when the receiver is on and paired with the transmitter). 3 Press and hold the sound and pairing button on the back of the receiver.
Note: See the User Guide for instructions on programming a universal remote.
1 Squeeze the battery tray’s sides together and slide it out of the remote control. 2 Remove the old battery and insert the new 3V lithium battery (CR2025) with the + side up. 3 Slide the battery tray back into the battery compartment until it clicks into place.
For complete warranty, visit www.insigniaproducts.com.
CONNECTING THE SPEAKERS TO THE RECEIVER 1 Connect one end of the speaker wires (included) to the jacks on the back of the speakers. 2 Connect the other end of the speaker wires to the SPK-L (left speaker) and SPK-R (right speaker) jacks on the back of the receiver, black/red for right channel and grey/red for left channel speakers. 3 Connect the 12V/1.5A AC adapter to the DC IN jack on the back of the receiver. Plug the other end into a power outlet. Left speaker
Right speaker
Soundbar 3.5 mm to RCA adapter (included) If required.
Speaker wires RCA cable (not included)
1 Remove the plastic tab from the battery compartment. 2 Point the remote control directly at the IR sensor on the front of the transmitter. You must be within approximately 23 ft. (7 m) of the transmitter.
AC Adapter 12V/1.5A
1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com
USING YOUR SPEAKERS 1 Press the (Power) button on the transmitter or the remote control to turn on your speaker system. The power indicator on the transmitter turns off. 2 Turn on the audio source device connected to your speakers and begin playback. 3 Press the (source) button on the transmitter to select the audio source or press the selected source button on the remote control until you hear sound from your speakers. Note: If you use the OPTICAL connection, you must change your device’s audio output setting to “PCM” or “Dolby 5.1” format. Refer to the manual you received with the output device for additional information.
4 Press and release the sound and pairing button on the transmitter, or the sound button on the remote control, to switch between stereo and surround sound modes. 5 Adjust the volume (Master volume and rear speaker volume) on the transmitter, or with the remote control, or on the audio source device to a comfortable level. Notes: When you adjust the master volume, the rear/surround speaker volume will be adjusted at the same time. When you adjust the surround volume, the master/front speaker volume will not be impacted.
Audio source (TV, Blu-ray, or cable box)
CONTACT INSIGNIA
6 Press the (Power) button again to turn off your speaker system. The power indicator on the transmitter lights red. 7 Adjust the sound delay on the remote control to synchronize the soundbar and rear surround speakers.
Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. The above contents shall be added in this file per Dolby request. INSIGNIA is a trademark of Best Buy and its affiliated companies Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2017 Best Buy. All rights reserved. Made in China
V1 ENGLISH 17-0288
