Transcript
Precision sheathed resistance thermometer with cable and plug
Flexible version with
Type “W-Ma 4040 H Ka S”
connected cable and plug
Structure: Basic values according to DIN EN 60751 in tolerance class 1/10 DIN B; Precision resistor 1 x Pt-100, connected in 4 wire circuit, installed in a protective tube of Ø 4 mm, extended with a flexible, mineral insulated sheathed cable, internal wiring made of Cu alloy and exterior protection sheath of material 1.4541; Surface polished; Nominal length NL = 400 mm; Connected cable insulated individually with teflon, together with silicone; with Lemo plug size 1 Maximum temperature of use 450°C (For variants please refer to the worksheet).
Types of wiring:
Areas of application: Temperature laboratory as Work and reference normal
Pt-100 4 wire Krick Meßtechnik & Partner GmbH & Co. KG Am Bahnhof 6a D-63505 Langenselbold USt.Id-Nr.: DE 811534429
Sparkasse Oberhessen Filiale Echzell BIC : Hela de F1 FRI IBAN: DE 5751850079 0085 002 279
Telefon 06184/92390 Geschäftsführer Telefax /923922 Dipl.-Ing. Herbert Krick E-Mail
[email protected] Amtsgericht Hanau HRA 5106 Pers. Haftender Gesellschafter: KMP Verwaltungs-GmbH, Amtsgericht Hanau HRB 95891
Precision sheathed resistance thermometer with cable and plug
Flexible version with
Type “W-Ma 4040 H Ka S”
connected cable and plug
Sheath diameter DMa:
KL = 1000
4.0mm 6.0mm Others
| | | |
Sheath material: 1.4541 (V2A) Others
| |
Nominal length NL: 300mm 400mm 500mm Others
| | | | | |
Connection cable Insulation: N L = 400
Shielded: Cross-section:
Silicone | Teflon | Yes | No | 0.22mm² Others
| | | | |
|
Cable length:
O4
KL=1000mm Others
| |
KL=1500mm
| |
ca . 26
Plug: Lemo Gr.1 Plug
| | | |
Gr.2 Coupling
| | | | Banana plug Others
| |
_______________________________________________________________________________________
Temperature load:
Measurement point: from|
| to |
| °C
Environment/Connector: |
_____________________________________________________________________________
Sensor element: Pt-100 Others
| °C ______________
Additional specification/ Remarks:
| |
Tolerance class “1/3 DIN B“ | | “1/5 DIN B“ | | “1/10 DIN B“ | | Others Company
:|
|
Your Ref.
:|
|
Contact person
:|
|
Quantity
:|
|
Street/Place
:|
|
Del. time
:|
|
Email address
:|
|
Telephone
:|
|
Krick Meßtechnik & Partner GmbH & Co. KG Am Bahnhof 6a D-63505 Langenselbold USt.Id-Nr.: DE 811534429
Sparkasse Oberhessen Filiale Echzell BIC : Hela de F1 FRI IBAN: DE 5751850079 0085 002 279
Telefon 06184/92390 Geschäftsführer Telefax /923922 Dipl.-Ing. Herbert Krick E-Mail
[email protected] Amtsgericht Hanau HRA 5106 Pers. Haftender Gesellschafter: KMP Verwaltungs-GmbH, Amtsgericht Hanau HRB 95891
