Transcript
Entering a Destination When you select a sorting method, the list of restaurants will appear.
Once you select a restaurant, the system then displays the Calculate route to screen (see Driving to Your Destination on page 44). NOTE See Key to Zagat Ratings on page 71 for details on the key to ratings.
36
Navigation System
By Map Input After you select Map Input from the Enter destination by screen, the display changes to:
Showing the Map of Current Position The Current Position selection assumes that you are looking for a destination in the immediate area. The display changes to:
NOTE: • Prior to departure, you can set areas to avoid. The system then includes them in its calculations for the destination you have entered. See Edit Avoid Area on page 87. • For information on the available voice commands, see Voice Command Index on page 124.
The red arrow indicates your vehicle position. Find your desired destination by pushing the joystick left, right, up, or down. The map and cross hairs will move in the same direction. Use the joystick to position the cross hairs on the desired icon, map feature, or road. If desired, use the ZOOM buttons to change the map scale. Then push in on the joystick to select an area. The address of the road segment will appear at the top of the screen.
▼
▲
Main Menu
▼
▲
Main Menu
Entering a Destination The yellow box indicates the area you will see when you click on the current map with the joystick.
Showing the Map of City With the City selection, the display changes to the Enter city name screen.
NOTE: The address of the road segment will be displayed on the 1/20, 1/8, 1/4, or 1/2 mile (80, 200, 400, or 800 meter) scale map.
When you have entered the desired city, the display changes to a map. The starting location will be the central position in the selected city.
If this is the desired destination, push in on the joystick again. If not, use the joystick to reposition the cross hairs, then push in on the joystick again to display the new address. Once you select an address, the system then displays the Calculate route to screen (see Driving to Your Destination on page 44).
Showing the Map of State With the State selection, the display changes to the Enter state name screen. After you select the desired state, the display changes to a map of the state, with the cross hairs located near the middle.
See Showing the Map of Current Position on page 36 for instructions on finding and entering your desired destination.
Use the joystick to move the cross hairs to the area of the state close to your intended destination. If desired, use the ZOOM buttons to change the map scale. When you have the cross hairs in the desired area, push in on the joystick. The map scale changes to a closer view.
Navigation System
37
