Transcript
Sauna heater Herkules XL S120 vapor Free-standing heater
For commercial sauna Optimal heat development by well-balanced quantity of stones. Service friendly modular construction Two hot stone volumes allow versatile steam shocks.
Installation diagram 18 kW optional Saunasteuergerät control unit ECON / EMOTEC
4
LSG
3 4 5
5 4
5 5 Netz / Main
24 kW optional Saunasteuergerät control unit ECON / EMOTEC
4
LSG 18 H
IPx4
3 3
MADE IN GERMANY
4 5
5
Minimum clearances **)
5
cabin-wall
5 5 Netz / Main optional 4
LSG 36 H
3 3
4 5 5
8
Saunasteuergerät control unit ECON / EMOTEC
53+8
30 kW
6
8 3 5
96
Netz / Main
Capacity acc. DIN
Vaporicer
18 kW
3 kW
24 kW 4 kW
Electrical. Fuse control Connection unit in A
3N AC 50 Hz 400 V
30 kW
Fuse LSG in A
Cabin altitude min. 2,10 m
Connecting Connecting Connecting Connecting Connecting cable main cable control cable LSG cable control cable main - control unit unit - heater - heater in unit - LSG in - LSG in mm² mm² mm² in mm² in mm²
3 x 16
3 x 16
5 x 2,5
5 x 2,5
5 x 1,5 4 x 1,5
5 x 1,5
4 x 1,5
3 x 16
3 x 35
5 x 2,5
5x6
5 x1,5 3 x 1,5
5x4 4 x 2,5
5 x 1,5
1 x 16
3 x 63
3 x 1,5
5 x 16
3 x 1,5
2 St. 5 x 4 1 St. 4 x 2,5
6 x 1,5
To install this sauna heater is a permanent water connection (pressure < 3 bar) necessary. The air intake vents must always be aligned behind the sauna heating unit.
All cross sections of a line are minimum diameters in mm² (Copper line)
Capacity acc. DIN
Vaporicer
94.4236
18 kW
3 kW
Grinded 94.4131 stainless steel / anthracite
24 kW
94.4237
30 kW
Druck-Nr. 29343560en 32.12
Art.-No.
Outer shell
Installation dimensions H/W/D cm
85 x 96 x 53
For cabin size
Minimum dimensions of air intake and exhaust vents
24 - 35 m³
50 x 6 cm
35 - 45 m³
50 x 8 cm
45 - 65 m³
50 x 10 cm
Weight without stones without package
Stone filling
Power switch gear needed
EOS Saunatechnik GmbH D-35759 Driedorf Telefon (0 27 75) 82-0, Telefax (0 27 75) 8 24 31
For operation with control units
EMOTEC L09 ca. 85 kg
2 x 60 kg
LSG 18H
4 kW
**) The wooden railing does not replace the heater protection. Depending on the individual situation of installation the cabin manufactuer must provide a suitable protection against contact.
8
EMOTEC HCS 9003 EMOTEC HCS 9003 DB/DL/DLF EmoTouch II PB/AF/GF
LSG 36H
Subject to technical mofifications
