Transcript
INTRODUCTION INTRODUCTION Thank you for selecting this Great Vigor Product.
Please read all instructions and familiarize yourself with the products and controls before operation. To prevent serious personal injury and/or property damage, operate all controlled models in a responsible manner as outlined herein. If you come across any problems and need some help, you can contact us on the internet at www.gv-hobby.com.tw. We hope you to enjoy our product. ˙ This product is not a toy. It is a high performance model product. It is important to familiarize yourself with the model, ˙ ˙ ˙
its manual, and its construction before assembly or operation. A child operating under the supervision of the adults is necessary. Always keep this instruction manual ready at your hand for your assembling and operating reference, even after completing the assembly.
CAUTIONS CAUTION CHOOSE THE RIGHT PLACE TO OPERATE YOUR R/C MODEL. ˙ Do not operate model products in rain, on public roads, near crowds, near airport, or near areas with restricted radio ˙ operation. This could cause serious accidents, personal injuries, and/or property damage.
˙ Do not run where loud noises can disturb others, such as hospitals and residential areas. ˙ ˙ Never run R/C models near people or animals. ˙ ˙ Never run indoors. There is a high risk of fire and/or damage. ˙ ˙ To avoid injury, do not run in confined spaces. ˙
INSPECT YOUR MODEL BEFORE OPERATION. ˙ For the best performance, it is important to make sure all the moveable parts work free without binding. ˙ ˙ Always use fresh batteries for your transmitter and for your receiver to avoid losing control of the model. ˙ ˙ Check the radio system and range before every driving session. To properly check the range, have a friend hold the ˙ ˙ ˙ ˙ ˙ ˙ ˙ ˙ ˙ ˙ ˙ ˙ ˙
car with the engine off and walk to the farthest distance that you plan to operate your model. Operate the controls to make sure the model responds correctly. Do not operate the model if there is any problem with the radio system. Never share frequency with somebody else at the same time. Radio signals will be mixed and you will lose control of your model. This may lead to accidents. Make sure that all screws and nuts are properly tightened. It is also a good idea to use removable thread lock wherever metal screws go into metal. Always test the brakes and throttle before starting your engine to avoid losing control of the model. As the front end of the antenna may be dangerous, do not aim it toward faces. Never reverse connection/disassemble the battery. This may lead to damage and leakage. As the product includes small and sharp parts, assemble and store this product only in places out of the reach of children.
AFTER OPERATION OF YOUR R/C MODEL ˙ Turn off receiver first, then turn off transmitter, this will prevent runaways. ˙ ˙ Be sure to keep your R/C model clean and free of excess dirt and grease, this will increase the life. ˙ ˙ Be careful when handling batteries, they will be hot after running. ˙ ˙ When the model is not in use, always turn off the receiver and transmitter. Furthermore, disconnect the batteries and ˙ remove them from the model and the transmitter. This may be dangerous such as overheat and leakage.
˙ Replace any batteries, they have been dented or have frayed wires, short circuits can cause fire. ˙ ˙ Do not store this model in a high-temperature/humidity area or in direct sunlight. ˙
1
INTRODUCTION ADDITIONAL
ITEMS NEEDED FOR OPERATION
˙Steering Servo
˙AC/DC Charger & Discharger (Purchase separately)
˙Receiver
(Included with RTR version)
(Included with RTR version)
˙2 Channel Radio Set (Included with RTR version)
˙Brushless Motor
˙ Brushless Speed Control ˙Um-3 Battery (8 Pcs)
(Included with RTR version)
˙Li-Po Battery 2 Cell (7.4V) X2
(Included with RTR version)
Li-Po Battery 4 Cell (14.8V) (Purchase separately)
(Purchase separately)
CAUTIONS EXTRA NEEDEDTO MAINTAIN YOUR BUGGY EXTRASTUFF STUFF NEEDED (Purchase separately)
˙Needlenose Pliers
˙Cutting Pliers
˙Body Scissors
˙Caliper
˙Screwdriver (-)
˙Screwdriver (+)
˙Tyre Glue
˙Shock Oil
2
˙Body Reamer
˙Knife
˙Hex Wrench (1.5,2.0,2.5,3.0mm)
˙Differential Silicone oil
Step 1
Front, Rear and Center Differentials
1A - O-Ring 3x1mm -- 12
1B - Pin 2.5x12.8mm -- 6
MV11721
MV11721
1C - Pin 4x26.6mm -- 6
1A
1C
MV22873
1A 1G
1G
1D
1D MV22873
1F
1F
1F
1F
MV22873
1C
<1-1> MV22811 (43T)
MV22873
MV22873
MV22873
Silicone Oil
Differential Oil
Step 1-1
MV22833 (53T)
1B 1B
MV22873
1B
MV22873
For Front and Rear (x2)
For Center (x1)
1E 1G
1A
MV11721
For Front and Rear (x2)
Differential Oil -- 1
For Center (x1)
1E - Grub Screw 4x3mm -- 3 1F - F/H Tapping Screw 3x16mm -- 12
1G - Ball Bearing 8x16x5mm -- 6
1D - Shim 8x12x0.4mm -- 3
3
Step 2
Front Gear box
2A - Button Head Tapping Screw 3x38mm -- 2 2B - Button Head Tapping Screw 4x12mm -- 2 2D
2C - Button Head Tapping Screw 3x8mm -- 1
2D - Grub Screw w/Threadlock 5x4mm -- 1
2B
MV1173
2G
2E - Grub Screw 4x4mm -- 1 2F - Shim 8x12x0.4mm -- 1
XV1631
MV162D4
2F XV1657
XV1631 2G
XV162U1AL
Step 2-1 MV22821 (13T)
<2-1>
Step 1
2C
2G - Ball Bearing 8x16x5mm -- 2
XV3611 2E
2A
Step 3
Front Shock Tower and Chassis Brace
3A - Lock Nut 4mm -- 1
3C - Lock Nut 3mm -- 4
3B - Button Head Tapping Screw 3x12mm -- 1
3C XV1625F1
3E
3A
3C
XV1321AL
MV110
3F
Step 2 3B
3D - Cap Screw 3x18mm -- 4 MV110
3E - Cap Screw 3x25mm -- 2 3F - Cap Screw 4x50mm -- 1
3D
4
Step 4
Front Axles and Steering Knuckles 4C - Pin 2.5x13.8mm -- 2
4A - Grub Screw w/Threadlock 4x3mm -- 4
4D - Pin 2.5x16.8mm -- 2
4B - Grub Screw w/Threadlock 5x5mm -- 2
4E - Shim 8x12x0.2mm -- 2 4D
4B
MV107
4F - Ball Bearing 8x16x5mm -- 4 4F 4E
4C
4F
4A
MV134 MV3574
4A
MV3575
Step 5
MV3575
For Right and Left Sides
Front Upper Arm
XV349F1
For Right and Left Sides
5B (MV3491)
5A
XV11304
8.8mm
XV11304
XV349F1
5A - Grub Screw 4x10mm -- 2
XV347F1 (R)
5B - Turnbuckle 5x25mm -- 2
For Right and Left Sides
5
Step 6
Front Lower Suspension Arms and Axles Step 5
6A
For Left Side 6A Step 5
Step 4
XV13401
XV13401
Step 4
Step 5
6A
For Right Side
Step 5
6A
6A - Button Head Machine Screw w/Threadlock 4x20 mm -- 4
Step 7
Front Suspension
Step 3
7A
Step 6 (R)
7C
Step 6 (L)
7D (MV11101)
7B
MV162D5AL
7D - Hinge Pin 4x67.5mm -- 2
7A - Lock Nut 3mm -- 2 7B - Button Head Tapping Screw 4x8mm -- 2
7C - Cap Screw 3x45mm -- 2
6
Step 8
Rear Gear box 8A
8A - Button Head Tapping Screw 3x38mm -- 2
XV162U2AL
8B - Button Head Tapping Screw 4x8mm -- 2
8C - Grub Screw w/Threadlock 5x4mm -- 1 8D
8D - Grub Screw 4x4mm -- 2
XV3613
8E
8F
XV1631 MV22821 (13T)
<8-1> Step 8-1
8C
XV3613
Step 1
MV1173 MV162D5AL
8F
8E - Shim 8x12x0.4mm -- 1
XV1631
8F - Ball Bearing 8x16x5mm -- 2
8B
Step 9
Wing Mount MV1412
9A 9B (MV1412)
MV1412
MV1412
9A MV1412
9A - Button Head Tapping Screw 3x18mm -- 4
9B - Post 6x32mm -- 2
7
Step 10
Rear Shock Tower
10E - Cap Screw 4x45mm -- 1
10A - Lock Nut 3mm -- 4 10B - Lock Nut 4mm -- 2
10F - Cap Screw 4x50mm -- 1
10C - Button Head Tapping Screw 3x10mm -- 2 10D - Cap Screw 3x25mm -- 6
MV110
10C
10D
<10-1>
MV1671
XV1333AL
Step 9
10B
Step 10-1
10F
10D
MV1411 10E
10B XV1624R1
10B 10D Step 8
8
Step 11
Rear Hubs
11A - Grub Screw w/Threadlock 5x5mm -- 2
11B
11B - Pin 2.5x16.8mm -- 2 11C
11A MV107
11C - Shim 8x12x0.2mm -- 2
11D 11D
MV3462
11D - Ball Bearing 8x16x5mm -- 4
Finished
Step 12
MV105
For Right and Left Sides (X2)
Rear Lower Suspension Arms and Hubs
12B - Grub Screw 4x10mm -- 2
12A - Lock Nut 3mm -- 4
12C - Cap Screw 3x25mm -- 2 XV349R1
MV113
12D - Hub Stud 3x38mm -- 2 12E
12E - Turnbuckle 5x36mm -- 2
MV113
XV349R1
For Right and Left Sides (x2)
<12-1>
10mm
Step 12-1
Step 12-1
For Left Side
12C
12C
12A
Step 11 (R)
12D (MV1501)
12B
12A Step 11 (L)
12B 12D (MV1501)
12A
XV347R1
XV347R1 12A
For Right Side
9
Step 13
Rear Suspension
13A - Flanged Lock Nut 3mm -- 2
Right Side
13B - Button Head Tapping Screw 4x12mm -- 2 13B
13C
MV162D4
Step 12 (R)
13A
13D (MV11101)
Step 10
Step 12 (L)
MV3562
Left Side
13C - Cap Screw 3x20mm -- 2
13D - Hinge Pin 4x67.5mm -- 2
Step 14
Rear Sway Bar Step 14-1
XV3613
14A
14B
XV3613 XV3613
XV3613
<14-1>
14C
14A - Grub Screw w/Threadlock 3x3mm -- 2
4.5mm
Step 13
14B - Grub Screw 3x16mm -- 2 14C - F/H Machine Screw 3x20mm -- 2
10
For Right and Left Sides (x2)
Step 15
Chassis Side Guards 15A - F/H Tapping Screw 3x12mm -- 8
For Right Side
MV1674 XV1657 MV1674 MV3002RAL (R)
XV1657
15A
15A 15A MV3002LAL (L)
MV1674
MV1674
XV1657
XV1657
15A
15A 15A
For Left Side
11
Step 16
Chassis
16C
Right Side 16C
Step 15 (R)
16C
MV30731 MV30731
16A 16C
MV30101AL
16A
Step 15 (L)
16C 16B
Left Side 16A
16A - F/H Machine Screw 3x10mm -- 8 16B - F/H Machine Screw w/Threadlock 4x10mm -- 2
12
16C - Lock Nut 3mm -- 8
Step 17
Steering Tie-Rods MV11303
17A - Turnbuckle 4x48mm -- 2 17A (MV1301)
V221524
MV11303
V221524
30.5mm
For Right and Left Sides (x2)
Step 18
Servo Saver and Steering Linkages 18D
18A - Lock Nut 3mm -- 4
MV30731
18B - Servo Saver Screw 3x19.7mm -- 2
18C - Cap Screw 3x20mm -- 2
MV3071
18D
MV3071
MV3071
18D - Bushing 6x10x3mm -- 4
MV30731
MV30731
18D
18E - Shim 8x12x0.8mm -- 2 18D
18B
<18-1>
18A 18F
MV30751AL
18B
18F
18A
18E
18E
Step 18-1
Step 18-1 Step 17 (R)
18C
18A
Step 17 (L)
18A
18C
18F - Flanged Ball Bearing 5x8x2.5mm -- 2
13
Step 19
Motor Mounting and Center Differential 19A - Button Head Tapping Screw 3x10mm -- 2
19D - Grub Screw w/Threadlock 4x4mm -- 1
19E - Cap Screw 3x20mm -- 8
19B - Button Head Machine w/Threadlock Screw 3x8mm -- 2
19C - Button Head Machine w/Threadlock Screw 3x12mm -- 4
19E
Step 19-1
19E
19D
EL36741
EL0074
19C
EV0141 (14T)
EL0074 EV30413Ti
EL00745
<19-2>
EL00745
19B
EL00711
19A
<19-1>
XV30421AL
Step 19-2 XV3041 Step 1 (MV22873M531)
14
Step 20
Front and Rear Shocks
20A - Lock Nut 2.6mm -- 4
20F - Shock Shaft 3.5x56.2mm -- 2 20G - Shock Shaft 3.5x65.7mm -- 2
20B - Washer 2.5x5.9x0.5mm -- 4
20H - Shock Body 14x45mm -- 2
20C - O-Ring 2.5x1mm -- 4
20D - O-Ring 3mm -- 4 20i - Shock Body 14x53mm -- 2 20E - O-Ring 3.5mm -- 8 20J - O-Ring 3x1mm -- 4 20K - O-Ring 12.4x1.78mm -- 4
MV138011
For Left Side(x2)
20A
20C
3.5mm 3.5mm
20B
Please Lock Here
3x1mm 3mm 20F (MV138011)
Step 20-1
20A 20B
20D
MV139011
20H (33B450AL)
20J
20E MV138011 (MV1592)
Step 20-1
MV138016
Please Lock Here
33B450AL
20D
20i (33B530AL)
20J 20E
MV139011 (MV1592)
20C
20G (MV139011)
MV138016 33B530AL
For Right Side(x2) 3.5mm 3.5mm 3x1mm 3mm
<20-1>
One 3mm O-Ring is Installed Between Two 3.5mm O-Rings and one 3 x 1mm O-Ring is Installed at the Base to Improve the Seal.
20K
33B450AL 33B530AL
For Front and Rear (x4)
15
Step 21
Shock Oil
MV138016
Silicone Shock Oil (Not Included) 33B450AL 33B530AL
! After filling with shock oil, GENTLY pump shock shaft up and down several times to eliminate air bubbles.
Step 20
Step 22
For Front and Rear (x4)
Shock Springs
For Front (x2)
Step 21 (F)
MV138011 (MV112)
MV138016
Step 21 (R)
22A (MV1383GA)
MV139011 (MV112)
MV138016
22B (MV1393GA)
For Rear (x2)
22A - Front Shock Spring 58x1.6mm -- 2
22B - Rear Shock Spring 80.5x1.6mm -- 2
16
Step 23
Front and Rear Shock Mounting MV1382
23B
Step 22
Step 22
For Front
Step 7
23A
Step 14
Step 22
MV1382
23B
Step 22
23A
For Rear
23A - F/H Machine Screw 3x20mm -- 4
17
23B - Flanged Lock Nut 3mm -- 4
Step 24
Steering Servo and Motor/Center Differential Mounting
24B
XV30221AL
MV3103
Step 19
MV3103
24B
CH-1 Steering
24B
<24-1>
Step 24-1
Step 16
24D
24A
24A - F/H Tapping Screw 4x12mm -- 2
24C
24C - F/H Machine Screw w/Threadlock 4x10mm -- 2
24B - Button Head Tapping Screw 3x10mm -- 6
18
24D - F/H Tapping Screw 3x10mm -- 4
Step 25
Front Suspension Mounting
MV3563
Step 25-1
Step 24
Step 23
25B
25A
25A XV1401
<25-1>
25B - F/H Tapping Screw 4x12mm -- 2
25A - F/H Tapping Screw 4x16mm -- 4
19
Step 26
Steering Linkage Mounting 26D
26F
26C
XV30762AL
26B
26E
Step 18
26B
Step 25
26A
26A
26A - Button Head Machine Screw 3x22mm -- 2 26B - Button Head Machine Screw w/Threadlock 3x20mm -- 2
26C - Washer Head Machine Screw w/Threadlock 4x10mm -- 2
26D - Button Head Tapping Screw 3x15mm -- 1
20
26E - Shim 6.1x9.8x0.2mm -- 2 26F - Lock Nut 3mm -- 2
Step 27
Rear Suspension Mounting
Step 23
27C
MV3554
Step 26
27A
27A
27B
27A - F/H Tapping Screw 4x16mm -- 4 27B - F/H Machine Screw 3x20mm -- 1
21
27C - Lock Nut 3mm -- 1
Step 28
Battery Holder Installation
EV3023
EV3023
<28-1>
Step 28-1
Step 27
28A
28A
28A - F/H Tapping Screw 3x10mm -- 4
22
Step 29
Electronic Speed Control Mounting
! ESC and Motor Install Diagram A
Black
B
Rad
C
Yellow
Brushless Motor
Brushless Speed Control
<29-1>
EL66704T1
Step 28
Double Sided Tape (20mmX50mm)
29A
29A - Button Head Machine Screw 3x6mm -- 2
23
Step 30
Battery And Receiver Connections
NEG-
Li-Po Battery 2-cells(7.4V)
POS+
Brushless Motor ELS13 NEG-
NEG-
POS+ Li-Po Battery 2-cells(7.4V)
NEG-
POS+ POS+
Battery 14.8V
Red (Positive)
Black (Negative)
White (Neutral)
Li-Po Battery 4-cells(14.8V)
Brushless ESC CH2
CH. 1 CH. 2 CH. 3 BATT
Receiver For Fan(6V) Switch (On/Off)
EV3023 (Step 28)
Battery 14.8V EL00742 Steering Servo CH1
Li-Po Battery 2-cells(7.4V)
Li-Po Battery 2-cells(7.4V)
EL0074 (Step 19-2)
EL0074 (Step 19-2)
EV3023 (Step 28)
24
Step 31
Steering Linkage 31C - Button Head Machine Screw 3x12mm -- 1
31A - Lock Nut 3mm -- 1 31B - Flanged Lock Nut 3mm -- 1
31D - Cap Screw 3x18mm -- 1
31E - Grub Screw 3x16mm -- 1 31C MV1302 MV1302
31A
MV1302
31E Servo Arm (Included with Servo)
MV1302
<31-1>
31D
Step 31-1
Step 30 Retaining Screw (Included with Servo)
31B
25
Step 32
Receiver Case
MV3746
MV3746
XV3742
Step 32-1
32B
32D
Receiver
32E
<32-1>
32E
Step 32-2
XV3742
32A (XV3743)
<32-2>
Step 31
32C
32C
32A - Post 6x19mm -- 2
32B - Button Head Tapping Screw 3x10mm -- 4
32D - Flanged Lock Nut 4mm -- 1
32E - Button Head Machine Screw 3x15mm -- 2
32C - F/H Machine Screw w/Threadlock 3x8mm -- 2
26
Step 33
Antenna Support Tube
Antenna Support Tube
! Slide the antenna through the antenna support tube, then push the antenna support tube into the antenna mount.
! DO NOT cut the excess antenna shorter. Allow the excess antenna wire to hang out beyond the end of antenna support tube.
Receiver
27
Step 34
Roof Plate Mounts 34A
34A - F/H Machine Screw w/Threadlock 3x8mm -- 4
34A
34A
34A
MV1683AL
MV1683AL
MV1672
MV1672
Step 35
Rear Center Roll Bar
MV1673 35A
35A 35A
Step 35-1 MV1685AL
<35-1>
35A
MV1673
Step 34
35A - Button Head Tapping Screw 3x8mm -- 4
28
Step 36
Front Center Roll Bar
MV1671 36B
MV1671
MV1681AL
MV1671
Step 35
36A MV1671
36A
<36-1> Step 36-1
36A - Cap Screw w/Threadlock 3x10mm -- 2
36B - Button Head Tapping Screw 3x8mm -- 2
Step 37
Roof Plate 37A
37A
MV1675AL
Step 36
37A - Button Head Tapping Screw 3x10mm -- 4
29
Step 38
Roll Bar Posts
38A
Step 37
MV1684AL
38A
MV1686AL
MV1682AL 38A
38A - Button Head Tapping Screw 3x8mm -- 6
30
Step 39
Roll Bar Mounting
39A
39A
Step 38
39B
39A 39A 39B
39A
Step 32
39A - Button Head Tapping Screw 3x8mm -- 6
31
39B - Lock Nut 3mm -- 2
Step 40
Tires and Wheels
Inside
Outside
Instant Cement (Not Included)
D08B04S
! Apply instant cement into the groove of the wheel.
C08B02BA
D08B04S
! Use small amount instant cement into the groove of the wheel. Make sure the tire is secure on the wheel.
Step 41
Wheel Rings
41A
C08A02AL
For Right and Left Sides (x4)
41A
41A - Button Head Machine Screw 3x6mm -- 24
32
Step 42
Wheels, Body and Wing Mounting MV120
MV120
BODY
MV120
MV120
MV120 MV1201
MV375BA
42A
Step 41
Right Side
Left Side Step 39
42A Step 41
42A - Wheel Nut 17mm -- 4
33
Quck Break Down Guide,Opening the Roll Cage
B Push back on the wing,then firmly pull the back of the roll cage up and pivot it forward.
A Remove the three self-tapping screws from each side of the roll cage. 39A
39A
39A 39A
39A
39A
When you reinstall the roll cage,push the two vertical centre posts partially over the mounts, then gently flex and push the two vertical rear posts over their mounts.Next, firmly but carefully flex the two upper posts over the mount on the shock tower. In some cases, it may help to first loosen the two roll cage mounts in front of the rear body mounts.
34
Quck Break Down Guide,Removing the Motor and centre Differential Assembly
A Unpiug the motors wires from the ESC, then unplug the two motor heat-sink fans from the Y-Harness adapter. Unplug the throttle channel lead from the receiver, then pull it out from below the motor heat-sink fans.
C pull the motor and centre differential up and out of the chassis
B Remove the two self-tapping scrws and
the two machine screws that secure the motor and centre differential assembly in place.
24C
24A
35
Quck Break Down Guide,Removing the Electronic Speed Control
A Unplug the motor wires from the ESC,
then unplug the Y-Harness from the motor heat-sink fans. Next, unplug the throttle channel lead from the receiver.
C Pull the ESC up and out of the chassis
B Remove the two screws that hold the ESC to the side frame 29A
36
Quck Break Down Guide,Removing the Battery Holder
B Pull the battery holder up and out of the chassis.
28A
28A
A Remove the four self-tapping screws from the bottom of the chassis that hold the battery holder in place.
37
Quck Break Down Guide,Removing the Receiver Mounting Box
A Remove the receiver box lid, then unplug the steering servo and throttle channel leads from the receiver.
C pull the receiver mounting box up and out of the chassis.
B Remove the two machine screws from the bottom of the chassis that hold the battery holder in place.
32C
32C
38
Quck Break Down Guide,Removing the Rear Suspension Assembly
A Remove the machine screw and the lock nut that hold the front of the rear suspension mounting brace in place.
27C
Rear Centre Dog Bone ( MV3554)
C Pull the rear suspension assembly, along with the rear centre dog bone up and off the chassis.
27A
27A
B Remove the four self-tapping screws from the bottom of the chassis that hold the rear suspensiom assembly in place.
27B
39
Quck Break Down Guide,Removing the Front Suspension Assembly
B Remove the self-tapping screw that holds front chassis brace to the front chassis cross-brace.
26B
26B
A Remove the machine screws that secure the steering tie-rods to the steering knuckles.
26D
D Pull the front suspension assembly,
along with the front center dog bone out and off the chassis. Front Center Dog Bone (MV3563)
25B
25A
C Remove the six self-tapping screws from the bottom
of the chassis that hold the front bumper and the front suspension assembly in place.
40
1/8 BL CAGE CAR REPLACEMENT PARTS LIST
Bushings 6x10x3mm
Ball Bearing 8x16x5mm
MV3074
Servo Saver Plastic Parts
L=12.5mm MV1301
MV11303
Servo Saver Screw Set
7x3mm Balls with Flange
Hub Stud Rear
MV22833
MV11721
Spur Gear - 53T
MV227542
Gaskets for Bevel Differentials
WWACO8X12X0.4
Differential Shims - 8.2x12x0.4mm
Pinion Gear - 13T
Ring Gear - 43T
MV22873M531 For Brushless
MV22873FR1
XV1631
Silicone Oil 60K CS WWACO8X12
Lower Hinge Pins
41
Differential Shims - 8x12x0.2mm
L=67.5mm XV347F1
MV11101
Gear Box Halves - Front/Rear
Pinion Output Joints
Differential Set - Bevel Gears
Center Differential 53T - Assembly
Front/Rear Differential 43T - Assembly
L=21mm
MV22873
MV22821
MV22811
Steering Servo Rod Set
L=36mm MV1173
Differential Output Joints
O-Rings for Differential Output Shafts
Servo Saver Metal Parts
L=48mm MV1302
Steering Rod Set 4mm (Tie-Rods)
L=38mm ONB3X1
MV1501
MV30731
MV3071
BU061003
BB081605
Front Suspension Arms - Lower
XV349F1
L=25mm XV13401
MV3491
Front Suspension Arms - Upper
CVD Universals
MV107
Rear Suspension Arms - Lower
Balls For Suspension - Steel 4x10mm
XV3613
33B450AL
Suspenison Plate Holders
L=45mm 33B530AL
Front Shock Body Set 3.5mm - Alu
Sway Bar Mount
L=65.7mm MV1383GA
Rear Shock Shaft Set 3.5mm
L=53mm
Rear Shock Body Set 3.5mm - Alu
L=58mm MV1393GA
Front Shock Springs 1.6mm - Silver
42
Rear Hubs - Left/Right
L=43mm MV162D4 Wheel Shafts
Rear Dog Bones - Axles
L=56.2mm MV139011
Front Shock Shaft Set 3.5mm
MV3462
L=93mm MV105
XV3611
Sway Bar Set - 2.8mm
Front Bumper
Rear Suspension Arms - Upper
Rear Turnbuckles 5mm - Upper
MV3562
XV11304
XV1401
L=36mm XV349R1
MV3492
Wheel Hubs - Front
Hex Hubs 17mm
CVD Universals Joint Rebuild Kit
XV347R1
MV138011
Suspension Holder Supports
Front Turnbuckles 5mm - Upper
L=124mm MV3574
MV3575
MV134
L=80.5mm
Rear Shock Springs 1.6mm - Silver
MV138016
MV1382
Shock Rebuild Kit
Shock Spring Spacer & Bushing Set
L=22.5mm MV112
MV1592
34B102A01
Ball Ends - 3.5mm for 7mm Ball
Wing Mount
XV1625F1
Chassis Brace - Front
Balls - Steel 6.9x4.9mm
XV3041
Antenna Mount
MV162D5AL
Front/Rear Suspension Plate - Alu
Receiver Mounting Box
XV162U2AL
L=14.2mm MV113
Wing Mount Stabilizer Rod
MV3563
Balls - Steel 7x3mm
V221524
MV1411
Center Differential Mount
L=130mm
Rear Shock Set w/Silver Springs
Shock Mounting Studs
Chassis Brace - Rear
XV3742
MV3746
Front Shock Set w/Silver Springs
MV110
XV1624R1
MV1412
L=112.5mm 34B120A01
Ball Ends - 4mm for 7mm Ball
L=73mm MV3554
Front Dog Bones - Center
MV30751AL
L=22.5mm
L=138.6mm
Rear Dog Bones - Center
XV162U1AL
Servo Saver Steering Plate 3mm - Alu Front Upper Suspension Plate 3mm - Alu
XV1321AL Front Shock Tower 4mm - Alu
Rear Sway Bar Plate 3mm - Alu
43
XV1333AL Rear Shock Tower 4mm - Alu
XV30421AL
XV30762AL Servo Sarer Support Plate 3mm - Alu
Main Gear Plate 3mm - Alu
EV30413Ti
EV0141
Motor Pinion Gear 14T - Steel
EL66704T1B23
T Type "Y" Connector
Side Guard Right - Alu
MV1681AL
Motor Heat-Sink
Front Center Roll Bar - Alu
MV30101AL
XV1657
L=56.8mm MV1683AL
Roof Plate - Alu
L=274mm MV1684AL
Main Roll Bar - Alu
44
Chassis 3mm - Alu
MV1675AL Body Mount
Center Side Roll Bars - Alu
Brushless Motor
Cooling Fan - 30x30x10mm
Motor Heat-Sink with Cooling Fans
Side Guard Left - Alu
L=130mm MV1682AL
540/3674 2370KV
L=74mm EL0074
EL00711F
MV3002LAL
MV3002RAL
EL36741
EL00711
Cooling Fan Y-Adapter
Battery Holder
Servo Mount Set - Steering
Brushless ESC - 120A 2-4S/6-12C w/ T Type Connector
Motor Mount - Dark Titanium
EL00742
EV3023
Radio Plate 2mm - Alu
EL66704
ELS13
Brushless ESC w/ T Type Connector and Motor Combo
MV3103
XV30221AL
L=40.2mm
Rear Upper Roll Bar - Alu
MV1685AL
MV1671
L=89mm MV1686AL
Rear Center Roll Bar - Alu
Roll Bar Stopper Set
Rear Side Roll Bars - Alu
C08B02BA
MV1674
MV1673
Roll Bar Connectors
MV106
D08B04SBA02AL
Wheel Plate Aluminium
Roof Plate Mounts
D08B04S
Circle Wheel - Black
Roll Bar Mount Set
C08A02AL
MV1672
Desert Tire NR with Foam
MV375BA
Desert Tire+Circle Wheel Black+Insert +Wheel Plate Aluminium w/Glued
Wheel Nuts
Bi-Level Wing - Black
200825P5 Body - Carbon/Yellow
200825P4 Body - Carbon/Orange
200825P2
Body - Carbon/Red L=80mm MV120
MV1201
Body Clips Type "R"
L=27mm 200825GV
200825P1 Body - Clear
Body Clips Type "R"
Body - Carbon/Green
Sorry,No Drawing Available Sorry,No Drawing Available
XV3743
6X19mm EL00745
Receiver Mounting Box Posts
DEL200825BL
Decal Set for BL CAGE
Cooling Fan Posts
45
DEL200825GV
Decal Set for GV CAGE
1/8 BL CAGE CAR OPTION PARTS LIST
MV22812
MV22822
Pinion Gear - 13T Steel
SEM3491
Ring Gear - 43T Steel
L=25mm SEM3492
Aluminiun Chassis Brace - Rear
Silicone Shock Oil - 200Wt.
SEG070
Silicone Differential Oil - 70K Wt
SEG010
Silicone Shock Oil - 40Wt.
SEG030
SEG100
SEG200
Silicone Shock Oil - 100Wt.
Silicone Differential Oil - 50K Wt
SEM138301
Silicone Differential Oil - 200K Wt
Silicone Differential Oil - 100K Wt
Titanium Turnbuckles (Tie-Rods) 4mm
SEG050
Silicone Differential Oil - 30K Wt
Silicone Differential Oil - 10K Wt
L=48mm
SE111
L=36mm SE110
Front Titanium Turnbuckles 5mm - Upper Rear Titanium Turnbuckles 5mm - Upper
SE112
SEM130
MV1624R42
L=58mm
Front Shock Spring Set
MV1383BA
Front Shock Spring 1.7mm - Black MV1383R13
Front Shock Spring 1.3mm - Red
MV1383Y Front Shock Spring 1.6mm - Yellow MV1383B14
SEM139301
Front Shock Spring 1.4mm - Blue
L=80.5mm MV1393B14
Rear Shock Spring Set
MV1393BA
MV1387B
Rear Shock Spring 1.7mm - Black
Shock Bump Stops - Blue
L=80.5mm
Rear Shock Spring 1.4mm - Blue
MV1393R13 Rear Shock Spring 1.3mm - Red
MV1393Y
Rear Shock Spring 1.6mm - Yellow
MV1387
MV1385 Dust Boots - Shock Shaft
Shock Bump Stops - Yellow
46
34C450HA06315WH
Shock Set - C Type (Hard Anodize)
34C530HA08315WH
Shock Set - C Type (Hard Anodize) SEM1341BA Front Steering Hubs - Black
SEM1341H
Front Steering Hubs - Hard Anodize SEM1341Ti
Front Steering Hubs - Dark Titanium XV3612 Front Sway Bar Set 2.5mm
SEM162D5H Front/Rear Suspension Plate -Hard Anodize
SEM162D6
SEM1341B
SE285
Front Steering Hubs - Blue
SEM162D4C2
Tool Set
SEM162D4C3
SEM162D4H
Rear Suspension Holder 2o - Hard Anodize Rear Suspension Holder 3o - Hard Anodize Front Suspension Holder - Hard Anodize
SEM349FR0
SEM349FR2
SEM349FR3
Suspension Holder Support - Hard Anodize Upper Suspension Plate 0o - Hard Anodize Upper Suspension Plate 2o - Hard Anodize Upper Suspension Plate 3o - Hard Anodize
SEM3071BA
Alu Servo Saver w/Bearings - Black SEM3071H Alu Servo Saver w/Bearings - Hard Anodize
SEM30751C Servo Saver Steering Plate 3mm - Carbon
SEM30751H
SEM3071B
Servo Saver Steering Plate 4mm - Hard Anodize
Alu Servo Saver w/Bearings - Blue
47
SEM15911
SEM1591
SEM15914L
Foam Dust Pads
Ball End Mount
Alu Ball End Left - M4x0.7mm
SEM15914R
Alu Ball End Right - M4x0.7mm
SEM106BA
Wheel Nuts w/Nylon Lock - Black SEM106TA
Wheel Nuts w/Nylon Lock - Titanium SEM106S
Wheel Nuts w/Nylon Lock - Silver SEM106WA
Nylon Washer
SEM106B
MV107
Hex Hubs 17mm
Wheel Nuts w/Nylon Lock - Blue
MV107B
MV106B
Hex Hubs 17mm - Blue
Wheel Nuts - Blue
MV107BA
MV106BA
Hex Hubs 17mm - Black
Wheel Nuts - Black
MV107Ti
MV106Ti
Hex Hubs 17mm - Dark Titanium MV107R
Wheel Nuts - Dark Titanium MV106
Hex Hubs 17mm - Red
MV106R Wheel Nuts
Wheel Nuts - Red
SEM1170BA
Wheel Nuts Closed - Black
CVD Dust Boots - Black
SEM1170B
CVD Dust Boots - Blue
Wheel Nuts Closed Aluminium
Micro Corner Markers - Yellow
EV0121 Motor Pinion Gear 12T - Steel
Alu Ball Bearing Shock Studs - M3.5x0.6mm
MV1061BA
MV1061AL
SE93010Y
SEM159135R (Use with 3.5mm Shock Shafts)
SE93020R
EL00746
Fan Filter with Mounts
Racing Cones for Micros - Red
EV0131 Motor Pinion Gear 13T - Steel
EL00743
EL667043
Fan Filter
EL667041
Brushless Speed Control Profile Card Brushless Speed Control USB Adapter
48
C08B02GA2
C08A02RE
Circle Wheel Smoke Silver
Wheel Plate Red C08A02GR
Wheel Plate Green C08A02GO
Wheel Plate Gold C08B02GA
C08A02BL
Circle Wheel Light Silver
MV3693S
Buggy Tires with Foam
MV093S
Wheel Plate Blue
D08B03S
D08B02S
Rally Tyres w/Inserts
MV3692S
Tyres - Digger with Foam
MV36921S3
Buggy Tire with Foam
Tyre - Multi Spike
Tyre - Road Rage
MV37001W
MV37002W
5-Claw Wheels - White
Blade Wheels - White
MV37001Y
MV37002Y
5-Claw Wheels - Yellow
Blade Wheels - Yellow
MV37001GA
MV37002GA
5-Claw Wheels - Silver
C08A02Ti
Wheel Plate Dark Titanium
DO8B01S1 Sand Tyre with Foam
MV37001BA
5-Claw Wheels - Black
Blade Wheels - Silver MV37002BA
Blade Wheels - Black
MV37002GR
Blade Wheels - Gray
MV37003W
MV37004Y
10-Claw Wheels - White
Dish Wheels - Yellow
MV37003Y
MV37004W
10-Claw Wheels - Yellow
Dish Wheels - White
MV37003GA
MV37004GR
MV37003BA
10-Claw Wheels - Black
Dish Wheels - Green
10-Claw Wheels - Silver MV37004BA
Dish Wheels - Black
MV37004P1 Dish Wheels - Carbon
D08B01SBA02AL Sand Tire+Circle Wheel Black+Insert +Wheel Plate Aluminium w/Glued
MV375W
XV3751Y
Bi-Level Wing - White
Bi-Level Wing - Yellow Type "S"
MV375Y
XV3751W
Bi-Level Wing - Yellow
Bi-Level Wing - White Type "S" XV3751RE Bi-Level Wing - Red Type "S"
MV375RE
XV3751BA
Bi-Level Wing - Red
Bi-Level Wing - Black Type "S"
49
XV3751P1
Bi-Level Wing - Carbon Type "S"
XV3753GR
Bi-Level Wing - Green Type "X"
XV3753BA
SEM1412T
SEM375T
Bi-Level Wing - Black Type "X"
MV3002RBL
MV3002LRE
Side Guard Right - Red
Side Guard Left - Red
MV3002RGR
MV3002LGR
Side Guard Right - Green
Side Guard Left - Green
MV3002RGO
MV3002LGO
Side Guard Right - Gold
Side Guard Left - Gold
MV3002LBL
MV3002RTi
Side Guard Right - Blue
Alu Wing Mount
Alu Super Wing MV3002RRE
Side Guard Right - Dark Titanium
MV3002LTi
Side Guard Left - Dark Titanium
Side Guard Left - Blue
MV1681RE
MV1682RE
Front Center Roll Bar - Red
Center Side Roll Bars - Red
MV1681GR
MV1682GR
Front Center Roll Bar - Green
Center Side Roll Bars - Green
MV1681GO
MV1682GO Center Side Roll Bars - Gold
Front Center Roll Bar - Gold MV1681BL
L=130mm
Front Center Roll Bar - Blue
MV1682BL
MV1681Ti
Front Center Roll Bar - Dark Titanium
L=56.8mm
Center Side Roll Bars - Blue
L=274mm
MV1684RE
Main Roll Bars - Red
Rear Upper Roll Bars - Red
MV1683GR
MV1684GR
Main Roll Bars - Green
Rear Upper Roll Bars - Green
MV1683GO
MV1684GO
MV1685BL
MV1683Ti
Rear Upper Roll Bars - Gold MV1684BL
Main Roll Bars - Dark Titanium
Main Roll Bars - Blue
L=89mm
Rear Center Roll Bar - Blue
L=40.2mm MV1684Ti
Rear Upper Roll Bars - Blue
MV1686RE
Rear Center Roll Bar - Red
Rear Side Roll Bars - Red
MV1685GR
MV1686GR
Rear Center Roll Bar - Green
Rear Side Roll Bars - Green
MV1685GO
MV1686GO
Rear Center Roll Bar - Gold
Rear Side Roll Bars - Gold
MV1685Ti
MV1686BL
Rear Center Roll Bar - Dark Titanium
L=80mm
Rear Side Roll Bars - Blue
MV1686Ti Rear Side Roll Bars - Dark Titanium
SEM1671BL
Roll Bar Stoppre Set - Blue
Roof Plate - Red
SEM1671RE
MV1675GR
Roll Bar Stoppre Set - Red
Roof Plate - Green
Roof Plate - Blue
Rear Upper Roll Bars - Dark Titanium
MV1685RE
MV1675RE
MV1675BL
Center Side Roll Bars - Dark Titanium
MV1683RE
Main Roll Bars - Gold MV1683BL
MV1682Ti
SEM1671GR
MV1675GO
Roll Bar Stoppre Set - Green
Roof Plate - Gold
SEM1671GO
MV1675Ti
SEM1671AL
Roof Plate - Dark Titanium
Roll Bar Stoppre Set - Alu
50
Roll Bar Stoppre Set - Gold SEM1671Ti
Roll Bar Stoppre Set - Dark Titanium
SEM1672BL
SEM1673BL
Roof Plate Mounts - Blue
Roll Bar Connectors - Blue
SEM1672RE
SEM1673RE
Roof Plate Mounts - Red
Roll Bar Connectors - Red
SEM1672GR
SEM1673GR
Roof Plate Mounts - Green
Roll Bar Connectors - Green
SEM1672GO SEM1672AL
Roof Plate Mounts - Gold
SEM1673GO SEM1673AL
SEM1672Ti
Roof Plate Mounts - Alu
Roof Plate Mounts - Dark Titanium
Roll Bar Connectors - Alu
SEM1674BL
Roll Bar Mount - Blue SEM1674RE
Roll Bar Mount - Red SEM1674GR
Roll Bar Mount - Green SEM1674GO SEM1674AL
Roll Bar Mount - Gold
SE095
SEM1674Ti
Roll Bar Mount - Alu
Roll Bar Connectors - Gold SEM1673Ti
Wrench 17mm
Roll Bar Mount - Dark Titanium
51
Roll Bar Connectors - Dark Titanium
