Transcript
Epson Mobilink TM-P60 Portable Printer Version 1.0
Installation Manual
85457
Contents About This Manual ................................................................................................................................... 1 1.0 Introduction.................................................................................................................................. 1 2.0
Setup ............................................................................................................................................ 1 2.1 2.2 2.3 2.4 2.5 2.6
3.0 4.0
Unpacking and Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Serial Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 COM 1 Port Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Load Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Set Printer Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Printer Utility Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Configuration ............................................................................................................................... 4 Appendix .................................................................................................................................... 10 4.1 Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4.2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
© 2004 Rice Lake Weighing Systems. All rights reserved. Printed in the United States of America. Specifications subject to change without notice. Version 1.0, November 2004
About This Manual This manual contains operating procedures for the Mobilink TM-P60 printer and provides you with all the information necessary for setup and operation.
1.0
Authorized distributors and their employees can view or download this manual from the Rice Lake Weighing Systems distributor site at www.rlws.com.
Introduction
The Mobilink TM-P60, built with Epson’s quality and reliability, is designed to meet the needs of both retail and hospitality industries for high-speed, on-the-go thermal receipt printing. Features include: • Eight-hour battery life • Print width up to 54 mm (2.13") • Rugged design for harsh environments • Non-volatile memory to store logos and print clean receipt • High-speed thermal receipt and label printing • Belt clip and shoulder strap for maximum • Auto cutter and drop-in paper loading mobility • Supports 802.11 wireless protocol (Bluetooth™ wireless available)
2.0
Setup
This section describes procedures for installation, setup, and connecting serial communications cables to the Mobilink TM-P60 printer.
2.1
Unpacking and Assembly
Immediately after unpacking, visually inspect the Mobilink TM-P60 to ensure all components are included and undamaged. The shipping carton should contain the printer (PN 85456) and the parts kit listed below. • AC battery charger (PN 85351) • Serial cable (PN 85459) • One roll thermal paper (PN 79447) • Installation CD (PN 85461) • Installation manual (PN 85457)
2.2
Serial Connection
This section includes instructions on how to set up a serial connection to the Mobilink TM-P60 printer. 1. Turn off the printer 2. Open the RS-232 connector cover located on the side of the printer. 3. Connect the serial interface cable to the printer and the serial port on the host PC. 4. Press and hold the FEED button on the printer and press the POWER button. NOTES:
• •
•
2.3
The printer automatically prints the self test results before use.
COM 1 Port Setup
Using an IBM-compatible personal computer running Windows® 2000 or XP follow the steps in this section to set up COM 1 port properties to printer default settings. NOTE: Setup may vary with operating system. 1. Click the start button on the PC monitor 2. Go to the Control Panel option 3. Select System Properties and Communication Port 4. Go to Port Settings 5. Enter the default printer settings listed below. See Figure 2-1 on page 2. • Bits per second: 19200 • Data bits: 8 • Parity: none • Stop bits: 1 • Flow control: Xon / Xoff
RS-232 nine-pin cable (PN 85459) used for setup only Printer senses serial cable on power up
Introduction
1
Figure 2-1. COM1 Port Example
2.4
Load Media
The following instructions explain how to install the roll paper in the Mobilink TM-P60. 1. Open the roll paper cover by pressing the button beside it. 2. Remove the used roll paper core (if applicable) and insert the new roll. Paper feeds from the bottom out between the tear bar and the cover. 3. Extend a short section of paper, close the cover and tear off the extra paper using the tear bar.
2.5
Set Printer Defaults
Follow these instructions to default the printer: 1. Open door 2. Hold down the FEED button and press the POWER button 3. Press the FEED button six times 4. Close door 5. Open door 6. Press FEED one time 7. Close door
2
Mobilink TM-P60 Installation Manual
NOTE:
Some important default settings to remember: • Default IP: 192.168.192.168 • Default subnet mask: 255.255.255.0 • Default SSID: EpsonNetIBSS (case sensitive) • Default port: 9100 • Default channel: 11
2.6
Printer Utility Installation
Install the CD containing the WinConfig utility or download it from the link provided Utility: UB-R02 TMNet WinConfig Link: http://www.epsonexpert.com/ee/techRes/index.htm?Productld=492 Figure 2-2 displays the default path the utility will install to.
Figure 2-2. TMNet WinConfig Installation Screen
Setup
3
3.0
Configuration
Figure 3-1 shows the opening screen of the TMNet WinConfig utility .
Figure 3-1. Utility Start Screen
Figure 3-2 shows the first screen of the utility.
Figure 3-2. WinConfig First Screen
4
Mobilink TM-P60 Installation Manual
Figure 3-3 shows the download screen for the printer.
Figure 3-3. Download Screen
Configuration
5
Figure 3-4 shows the path for setting up the com port.
Figure 3-4. Com Port Setup Path
Figure 3-5 shows the default settings to be used.
Figure 3-5. Default Settings
6
Mobilink TM-P60 Installation Manual
Double click TM-P60 under Model Name then select View - Refresh on the tool bar
Figure 3-6. Printer Selection
Figure 3-7 shows the default settings - these are not configured yet.
Figure 3-7. Interface Properties
Configuration
7
Figure 3-8 shows where you enter and verify the wireless information.
Figure 3-8. Interface Properties
Figure 3-9 shows the screen for entering the TCP/IP information.
Figure 3-9. Interface Properties
8
Mobilink TM-P60 Installation Manual
Figure 3-10 shows the information screen. Click Refresh to enable configuration.
Figure 3-10. Interface Properties
Figure 3-11 shows the final WinConfig configuration screen. Click OK to send data and finish configuration.
Figure 3-11. Data Sending Confirmation
Configuration
9
4.0
Appendix
4.1
Options
Table 4-1. Options and Replacement Parts
Column Capacity (continued) 60 mm paper Font A: 36 columns Font B: 43 columns Font C: 54 columns Character Size 60 mm paper Font A: 1.5 (W) x 3.0 (H) mm .059 x .118” Font B: 1.25 (W) x 3.0 (H) mm .049 x .118” Font C: 1.0 (W) x 2.0 (H) mm .039 x .079” Character Set 95 alphanumeric, 48 international, 128 x 10 graphic Characters Per Inch Font A: 17 cpi Font B: 20 cpi Font C: 25 cpi Dots Per Inch 203 dpi Bar Code UPC-A, UPC-E, JAN8 (EAN), JAN13 (EAN), CODE 39, CODE 93, CODE 128, ITF, CODABAR
Specifications
Power
Part Number
Name
Description
85456
Printer
Mobilink TM-P60 Printer
85351
PS-10
Exclusive AC adapter for charging. Connects directly to the TM-P60. Charge time: five hours.
85458
OT-CH60
Remove the battery from the TM-P60 for charging. Charge time: 2.5 hours.
85459
OT-RS60
Serial cable connection
85460
LIP-2500
Lithium-ion battery
75947
Roll Paper
Required for printing
85457
Manual
Installation Manual (this manual)
85461
TM-P60 CD
Technical Reference, TMNetconfig, TMRogo
4.2 Printer
Interface Protocols Data Buffer Print Speed Paper Loading Paper Width Paper Diameter Auto Cutter
RS-232C (setup), 802.11b (default) TCP, UDP, ICMP, IP 128 bytes 70 mm/sec (max) Drop-in 58 mm/2.28” (default), 60 mm/2.36” (spacers provided) 50 mm (max) Software controlled – Partial cut, left uncut (500,000 cuts)
Windows® 2000/XP recommended 802.11b Port 9100
Printing
AC adapter (five hours for full charge)
Electrical Specifications EMC Standards DKD Functions MCBF
VCII class A, FCC class A, CE marking, AS/NZS 3548 class B Dual drivers 10,000,000 lines
Operating Temperature Water Proof Dust Proof
0°C to 50° C 32° F to 122° F Moisture resistant (IPX1) Dust resistant (IPX3)
Enclosure
Print Method Dot/Line Font
Column Capacity
10
Eight–hour life
Environmental
System Requirements Operating System Access Point Print Protocol
Lithium-ion Battery (rechargable) AC adapter Power Charging
Thermal line printing 420/432 dots A: 12 x 24 B: 10 x 24 C: 8 x 16 58 mm paper Font A: 35 columns Font B: 42 columns Font C: 52 columns
Mobilink TM-P60 Installation Manual
Dimensions Weight
103 (W) x 159 (D) x 65 (H) mm 4.05 x 6.25 x 2.55“ 599 g w/battery w/out paper roll 1.32 lb
