Transcript
Made for high volume production
EQUIPMENT CATALOGUE 2016/2017
ANTALIS
IS
PROUD
TO
OFFER
EQUIPMENT CATALOGUE – THE LARGEST
RANGE
OF
DIGITAL
PRINT&PRINT FINISHING EQUIPMENT FOR SIGNMAKERS, GRAPHICS SOFTWARE
AND
ACCESSORIES
FROM
LEADING INDUSTRY BRANDS. THIS CATALOGUE WILL REPRESENT JUST PART OF EACH SUPPLIER PRODUCT PORTFOLIO. IN COOPERATION WITH OUR SUPPLIERS ANTALIS TEAM ARE READY TO FIND RIGHT AND THE BEST SOLUTIONS FOR YOUR NEEDS.
JUST ASK ANTALIS TEAM!
www.antalis.lv www.antalis.lt www.antalis.ee
Estonia
Latvia
Lithuania
Mart Orav Visual Communication Sales Manager Estonia
Maris Semenovics Baltic Product Manager for Equipment
Denas Danyla Sales Manager Lithuania
Antalis AS
AS Antalis
Linamäe 6, Tänassilma küla Saku vald 76406 Harjumaa, Estonia phone +372 680 0940 mob +372 5348 8024
[email protected]
Granita str. 17 Stopiņu appanage LV-2119, Latvia Phone: +371 67 100 811 Mob.: +371 26 645 734
[email protected]
Madis Tähtsalu Visual Communication Field Sales
Viktors Turlais Visual Communication Sales Manager Latvia
Antalis AS
AS Antalis
Linamäe 6, Tänassilma küla Saku vald 76406 Harjumaa, Estonia Phone: +372 680 0940 Mob: +372 680 0952
[email protected]
Granita str. 17 Stopiņu appanage LV-2119, Latvia Phone: +371 67 100 811 Mob.: +371 29 211 599
[email protected]
Antalis UAB
Ukmergės str. 280, LT- 06115 Vilnius, Lithuania Phone: +370 5 2649 649 Mob. +370 698 23 586
[email protected]
PRINT SOLUTIONS
EPSON SURECOLOR SC40610
SPECIFICATIONS Printhead configuration Minimum Ink droplet Volume Maximum print resolution Media Width Roll Weight Ink Number of inks Ink cartridge Dimensions Weight
1 x CMYK
PrecisionCore TFP printhead 4.2 pl 1440 x 1440 dpi 300 to 1,626 mm (64 inch) Up to 45 kg Epson UltraChrome GS3 4 colours ( C,M,Y,K ) capacity 700 ml W: 2,620 mm, H: 1,338 mm, D: 972 mm 279 kg (without ink cartridges)
Get more from your large format prints with the Epson SC-S40600. The 4-colour set produces vivid results for a range of applications – from professional signage to POS and beyond.
PRINT MODES Adhesive Vinyl / Canvas/ Textile Paper / others Banner Film
13.2 m2/h 15.4 m2/h 4.7 m2/h
720x1440dpi – 4 Pass High Quality 720x720dpi – 4 Pass High Quality 1440x1440dpi – 12 Pass
EPSON SURECOLOR SC60610
SPECIFICATIONS Printhead configuration Minimum Ink droplet Volume Maximum print resolution Media Width Roll Weight Up to Ink Number of inks Ink cartridge capacity Dimensions Weight
2 x CMYK
PrecisionCore TFP printhead 360 x 2 4.2pl 1440 x 1440 dpi 300 to 1,626mm (64 inch) 45 kg Epson UltraChrome GS3 4 colours ( C,M,Y,K ) 700 ml W: 2,620 mm, H: 1,338 mm, D: 972 mm 291 kg (without ink cartridges)
Get more from your large format prints with the dual-printhead design of the SC-S60600. The 4-colour set produces vivid results for a range of applications – from professional signage to POS and beyond.
PRINT MODES Adhesive Vinyl / Canvas/ Textile Paper / others Banner Film
25.0 m2/h 29.4 m2/h 8.7 m2/h
720x720 dpi – 4 Pass High Quality 720x720 dpi – 4 Pass High Quality 1440x1440 dpi – 12 Pass
5
EPSON SURECOLOR SC80610
CMYK, Lc, Lm, Lk, Or, Re + Mt or Wh
SPECIFICATIONS Printhead configuration Minimum Ink droplet Volume Maximum print resolution Media Width Roll Weight Ink Number of inks Ink cartridge capacity Dimensions Weight
PrecisionCore TFP printhead 360 x 2 4.2 pl 1440 x 1440 dpi 300 to 1,626mm (64 inch) Up to 45 kg Epson UltraChrome GS3 ink with red 9/10 colours (C,M,Y,K, Lc, Lm, Lk, Or, Re + Mt or Wh) 700 ml W: 2,620 mm, H: 1,338 mm, D: 972 mm 284 kg (without ink cartridges)
PRINT MODES Adhesive Vinyl / Canvas/ Textile Paper / others Banner Film
25.0 m2/h 29.4 m2/h 8.7 m2/h
720x720 dpi – 4 Pass High Quality 720x720 dpi – 4 Pass High Quality 1440x1440 dpi – 12 Pass
FOR ALL EPSON SURECOLOR SERIES PRECISION High ink drop accuracy Epson PrecisionDot improves productivity and print quality
Printhead guard Protects against damage caused by paper jams and foreign objects
Vivid results Epson UltraChrome GS3 inks – wider colour gamut than the previous ink set
Long-lasting quality Prints can be outdoors for up to three years without fading
QUALITY Exceptional accuracy Epson TFP PrecisionCore printhead
PREVIOUS INK
GS3 INK
PRODUCTIVITY Reduced maintenance Automatic fabric wiper cuts weekly maintenance time by 80%
6
Improved printer management Control dashboard supports remote management of print settings, media and ink
Quick and easy setup Printer can automatically set correct media parameters
EPSON SURECOLOR P SERIES
Epson Stylus® Pro 4900
Epson MetallicProof Silver Film A breakthrough aqueous coated silver film. Virtually any metallic color can be simulated using this silver base film and Epson UltraChrome HDR White Inks.
The Printer for Art Directors and Designers Who Demand the Very Best. The industry-standard 17-inch wide printer equipped with Epson UltraChrome® HDR Ink technology for extreme color matching — in RGB, CMYK and Spots. This is the exact same printing technology used among the most demanding commercial and flexographic printers for final contract proofing.
Epson Stylus® WT7900
Epson ClearProof Film New ultra-clear film with virtually instant-dry capability. Capable of high ink densities for an extremely wide color gamut — perfect for various flexo and gravure print jobs.
Designed specifically for proofing flexographic and gravure print jobs that require the color white, the Epson Stylus Pro WT7900 incorporates our latest achievements in high-resolution ink jet technology — including our breakthrough Epson UltraChrome® HDR White Ink.
SureColor SC-P7000 Violet Spectro Experience the most accurate colour reproduction on the market and produce high-quality, long-lasting prints.
HeadExotic Thin Film Piezo print head technology. Extreme printing performance and dot placement accuracy. Capable of printing both color and white at the same time.
7
EPSON SURECOLOR F SERIES
SureColor SC-F6200 • Print up to 44in (1117mm) wide and up to 63.4 m2/h • Integral, easily refillable 1.5-litre ink system • 2-litre waste bottles for easy, costeffective ink disposal
Garment Durability At the heart of any good dye-sublimation transfer technology is durability — and Epson UltraChrome DS Ink technology is no exception. Superior light and wash fastness for the most demanding applications.
• Includes HQ mode for photo-quality rigid substrate printing as standard • Add HDK black ink for enhanced black density printing on specialist fabrics
SureColor SC-F7200 The complete solution for printing superior quality textiles and soft signage. Print up to 64in (1625 mm) wide and up to 58.9 m2/h
Oeko-Tex® Certification3 Epson UltraChrome DS Ink technology, when applied to polyester fabrics, passes the requirements of Oeko-Tex Standard 100 for human and ecological requirements for class 1 products, which means — it’s safe.
SureColor SC-F9200 Make long print runs easy with this fast and consistent textile printer. Choose the SC-F9200 and discover a new level of speed, quality and accuracy.
Fast-Drying A unique property of Epson UltraChrome DS Ink technology is its exceptionally fast-drying performance. This allows for greater print speeds and significantly higher productivity.
8
Twin Epson PrecisionCore TFP printheads for higher throughput and longer production life Fast printing up to 100 m2/h draft mode, 56 m2/h production mode, 27 m2/h quality mode.
Perfect for low to medium volumes printing on textiles and rigid substrates.
EPSON SURECOLOR F2000
WHITE EDITION
Performance 4-Color + White
Amazing Color Performance
Epson UltraChrome DG Ink produces exceptionally vibrant colors, neutral grays, and sharp contours.
A New Benchmark. Having both color and White inks on board, Epson developed the SureColor F2000 White Edition to handle virtually any garment imaging requirement.Byutilizinganadvanced PrecisionCore TFP printhead — developed specifically for our unique Epson UltraChrome DG garment ink technology — the purpose-built SureColor F2000 series produces outstanding garment print quality, at production-level print speeds. And, when you combine this cutting-edge imaging technology with
world-class service and support, the SureColor F2000 series could quite possibly be the best direct-to-garment printers ever developed.
10" x 8" Upper Chest
Fast
68
Color Only
82
Production
Epson developed an all-new natural shade of white for outstanding color and white-only garment imaging.
142
White & Color IMAGING TIME IN SECONDS
199 0
30
60
Best Quality
126 101
Outstanding White Ink Density
Quality Production
90
120
150
180
247 210
240
270 5 Inks
Print times shown are based upon a loaded garment entering the printer, the actual printing of the garment, then the garment exiting the printer for removal. Computer processing, network transmission, and loading and unloading of the garments are not included in these times. Tests conducted by Epson America, Inc. as of September 2013.
COLOR EDITION Performance 4-Color
High Garment Durability Independently tested by Philadelphia University using the AATCC standards, the SureColor F2000 received the highest possible rating of 51 — ensuring your garments will last.
A Smart Option. Not every printed garment requires White ink. For this reason, Epson developed the SureColor F2000 Color Edition. By dedicating all printhead nozzles to color ink, we’re able to increase the overall print speed by up to 80 percent, versus printing the same color only garment on the SureColor F2000 White Edition. For print shops planning for various garment production goals, this increase in daily production — along with significantly reduced printer maintenance — provides a smarter option. 10" x 8" Upper Chest
Production
Color Only
Epson Pretreatment Fluid Specialized pretreatment fluid for our Epson UltraChrome DG Ink for color and black garments. This ensures amazing White and color ink density with a feel that’s soft to the touch.
44 69
White* & Color IMAGING TIME IN SECONDS
Best Quality
*Fast and White Printing Modes are not applicable to the Color Edition
0
30
60
90
120
150
180
210
240
270 4 Inks
9
Durst
P10/250 SPECIFICATIONS Printhead: Minimum Ink droplet Volume Resolution Maximum Media Width Ink Rip INK Set combination Dimensions Weight Media thickness
Durst QUANDRO ARRAY 10 printhead 10 pl up to 1000 dpi 250 cm UV curable pigment inks for interior Caldera GrandRIP+ CMYK Light cyan and Light magenta, white Process colour addition (PCA) Width 390 cm, Lenght 105 cm 2000 kg Boards up to 50 mm
PRODUCTIVITY – continuous printing at full width Rho P10 200: up to 205 m./hour Rho P10 250: up to 240 m./hour
Rho P10 200 HS: Rho P10 250 HS:
up to 350 m./hour up to 400 m./hour
Rho P 10/200/250 flatbed printers for outstanding productivity
FEATURES INCLUDE: • Light colours (lc and lm) for perfect colour graduation • Durst Quadro Array 10M printhead technology for outstanding print quality without loss of speed • Twice the number of nozzles for double the speed • LED pin curing for sealing the print before final drying using a UV light source
Aplications Rho P10 Series. Typical applications The “fine art” printing quality of all P10 printers allows for close up viewing of a wide range of promotional material. From the P10 160, the entry level machine to the P10 HS Series, all achieve the finest quality. The productivity of, in particular, the P10 HS. Series means that it is also capable of printing high volume items, as well as short run, even one offs, cost efficiently. Typical applications of all the printers in the Rho P10 Series: • Backlits for windows or light boxes • Particularly for luxury goods including cosmetics • Indoor and outdoor signage • POP and POS material • Small to medium sized packaging
10
• Optional mechanical front stops enable parallel printing of boards side by side • Highest reliability in the market (24/7 production) • Roll to roll printing options • Highest reliability on the market (24/7 production)
Durst
Tau 330
SPECIFICATIONS Printing technology: Ink colors/printing modes: Colors: Image quality: High Definition Print Resolution: Printing speed at full color: HD Print Mode : Substrate type: Substrate input/output system:
Single-Pass UV Inkjet Technology (drop on demand + variable drop size) with Xaar 1002 hybrid side shooter grayscale print head technology. Standard UV Inks and Low Migration UV Inks available. CMYK, optional Orange & Violet, optional White. Standard Print Resolution: 720 x 360 dpi (DOD) 720 x 1260 dpi (binary) Standard Print Mode: up to 48 lin. m/min, (157,2 lin. Ft./min) 37 lin. m/min, (121,5 lin. Ft./min) Coated & uncoated paper, white or transparent film PP, PE, PVC, POPP, PET, Aluminum foil Base configuration: Roll-to-roll. Roll diameter max. 68 cm (25 in.) Core diameter 7,6 cm (3 in.), Weight max. 120 kg With optional jumbo un/rewinder max. roll diameter: 100 cm (39,37 in.), core diameter 7,6 cm, max. weight 240 kg
Digital UV Inkjet Narrow Web Label Press
Aplications Tau 330 digital UV inkjet applications include: Short & medium run printing of a variety of label jobs such as industrial and security type labels, durable electronics and automotive labels, paint, specialty food & beverage, body & health care, household chemical, DIY, … and more. Additionally, the Tau Low Migration & Low Odor UV Inkjet Ink capability opens new applications in Primary Food Package Printing.
Sole
Sole S
Sun creme
4
Sole
Sun creme
8
Sun creme
6
Front and back sideprinting on cardboard material for tags and tickets.
Printing on aluminum foils for blister, aluminum lids and otherpackaging applications.
Printing on tube laminate
11
Ricoh LATEX PRO L4160
SPECIFICATIONS Printhead configuration Minimum Ink droplet Volume Resolution Maximum Media Width: Roll Weight Ink AR (Aqua Resin) INK Set combination Ink cartridge capacity Dimensions Weight
Ricoh GEN5 high-speed piezo durable print heads 4 pl 600, 900, 1200 dpi Pro L4160: 162 0mm Up to 45 kg Ricoh Durable Latex ink 4-colour mode (CMYK) 6-colour mode (CMYKOrGr) 6-colour+white mode (CMYKOrGrW) 600 ml 2879 mm x 854 mm x 1435 mm 231 kg
PRINT MODES Pro L4160: 6-colour mode/6-colour mode + white 8 pass: Super Draft 17.2 m2/h 12 pass: Draft 9.1 m2/h 16 pass: High Speed 7.0 m2/h 24 pass: Standard 5.6 m2/h 32 pass: High Quality 3.3 m2/h
Pro L4160: 4-colour mode. 4 pass: Super Draft 33.1 m2/h 6 pass: Draft 18.2 m2/h 8 pass: High Speed 13.8 m2/h 12 pass: Standard 11.0 m2/h 16 pass: High Quality 6.6 m2/h
Increased versatility in large format printing New latex ink technology. 6-colour process including orange and green. The brilliant orange and green inks are ideal for posters and POPs for food industry products. Improved spot colour enables superb design package proofs.
White ink for more vivid results. Expands the range of applications Printing white ink as a foundation colour layer on transparent or colour materials helps retain the natural vividness of colours.
12
High black density and improved glossiness. Delivers rich and contrasting details The increased density of the black ink results in sharper, richer details and the improved glossiness creates more vivid, eye-catching colours.
Excellent drying. Dramatically improves efficiency The ink dries fast enough to immediately move on to secondary processes such as laminating and installing. No time gets wasted on drying time, which is a big bonus on productivity.
COLORGATE
Production server 10 The most flexible RIP Software Productionserver 10 is designed to meet individual requirements and demands for highest quality and provides access to implement highly efficient, digital print & proofing workflows by its modular and flexible design. Excellent Color Management for optimal color reproduction with neutral grey tones, natural skin tones and brilliant colors are based on the unique recalibration technique: Media Device Synchronization (MDS). Furthermore, Productionserver is capable of standard compliant production according to international standards, such as ISO 12647, G7 and ProcessStandard Digital (PSD).
Output Management Set(s) Reference Profiler RPFM
Output Management Sets (OMS) Cat1
Cat2
Trim Nesting TNM
Cat3
Device Link Profiler DLPFM Proof Standard Digital PSDM
Ink Saver
Multicolor Profiler MCPFM
Output Management Set(s) 9
No Ink Saver
9
Photo FineArt PHFM 9
Linearization Assistant Quality Assurance QAM
Access Control ACM Color Atlas CAM
PS-Cat 1- OMS (Epson)
TVI Calibration TVICM
TVI Calibration TVICM
Default modules
Express Profiler EPFM 9
Profiler PFM
Express Profiler EPFM 9
Profiler PFM
Linearization Assistant
Print and Cut PCM
Print and Cut PCM
Quality Adssuare Module (QAM) Cost Calculation Module (CCM)
Photo FineArt PHFM
Photo FineArt PHFM
9
Linearization Assistant
9
Quality Assurance QAM
Linearization Assistant Quality Assurance QAM
Cost Calculation CCM
Container + Tiling
Container +
Color Replacement
Tiling
Tiling
Tiling
Tiling
Color Replacement
Color Replacement
Media Device Synchronization (MDS)
Color Replacement
Color Replacement
Media Device Synchronization
Media Device Synchronization
Print and Cut Module (PCM)
Media Device Synchronization
Output Management Set(s) 9
9
Color Atlas CAM
Photo FineArt Module (PHFM) Output Management Set(s)
Access Control ACM
Container +
9
9
Cost Calculation CCM 9
Container +
Cost Calculation CCM 9
Container +
Media Device Synchronization
9
5 Hotfolder
9
10 Hotfolder
9
10 Hotfolder
9
20 Hotfolder
9
40 Hotfolder
9
1x APPE RIP
9
2x APPE RIP
9
2 x APPE RIP
9
4x APPE RIP
9
8x APPE RIP
PS10 Select
PS10 Select: The RIP software for an affordable start into the professional printing business. PS10 Select is extensible and scalable at any time.
PS10 Pro
PS10 Pro: Is designed for quality and costconscious users. The Cost Calculation Module (CCM) gives a detailed overview of the costs in terms of exact ink and material costs related to individual orders. The Quality Assurance Module (QAM) allows verifying the color quality in order to ensure the best possible output quality anytime.
PS10 Epson Edition
PS10 Epson Edition is the ideal RIP software to operate a Epson printer (Cat 1) to meet the printing needs of print service providers or in small production environments. It covers all the areas in largeformat printing (LFP).
PS10 Ultimate
PS10 Ultimate: The extensively equipped PS10 Ultimate enables print service providers to handle various different jobs. PS10 Ultimate is the ideal solution for extended production environments. The included Print & Cut workflow and the quality-proven Profiler (PFM) are leading to an overall gain in flexibility via a wizard-guided option to profile any kind of media.
PS10 Campaign Printing
PS10 Campaign Printing: The eight included Adobe PDF Print Engines are increasing the overall RIP performance, which leads to significant time savings, especially while handling several print jobs simultaneously. Highly sophisticated print work can be processed in an optimal way while complying with the most important quality standards like ISO 12647 and PSD. The Trim Nesting Module (TNM) allows an automated cut workflow (Flexa, Fotoba).
13
CUTTING PLOTTERS AND TABLES
Graphtec
CE6000 Series SPECIFICATIONS CE6000-60 Maximun cutting area: Mountable media width: Number of push rollers: Maximum cutting speed:
603 mm x 50 m 712 mm min 50 mm 2 rollers 900 mm/s (at 45º direction)
CE6000-120 Maximun cutting area: Mountable media width: Number of push rollers: Maximum cutting speed:
1213 mm x 50 m 1346 mm min 120 mm 3 rollers 1000 mm/s (at 45º direction)
High Quality, High Reliability Easy to operate, no experience required. Setting new industry standards for it’s class
Window display (Indoor signage)
Vehicle decoration/ restyling
Outdoor signage
Custom clothing (Heat transfer)
POP/POD
Labels/Stickers (Print & Cut)
AMOImproved ARMS 5.0 for high precision cutting 4-point axis alignment This feature compensates for any distortion on the X-axis and Y-axis using world beating algorithms. (Two-axis correction is Graphtec’s proprietary technology.) This leads to more accurate registration and improves the reliability and quality of Print & Cut.
Print
Data
Cut
Distorted graphics in printing
Multiple marks compensation When the design is printed in the matrix copy function, the action of reading the marks and contour cutting is repeated in each copy. It can significantly improve productivity for Print and Cut. * This function is available when the Graphtec Studio or the Cutting Master 3 software is used.
Segment area compensation The 4-point axis alignment is performed for each segmented area this is performed by reading the mark in the middle of the media feeding direction and provide high-precision alignment in the Print & Cut of long-lengths. * This function is available when the Graphtec Studio or the Cutting Master 3 software is used.
Cut with Graphtec two-axis correctio n Cut in general single-axis correction
Auto mark detection The first registration mark is automatically detected within a wide search area; this eliminates the need to manually move the sensor near the registration mark position. Subsequent marks are automatically located which improves the operation of the registration mark searching.
Auto sensitivity adjust
NEW
The sensitivity of the registration mark sensor is automatically set by measuring the reflective level of the mark and the background of the actual media. The mark can be detected when the colour of the mark has a reasonable contrast against the background. For example, a white mark can also be detected on a coloured background.
15
Graphtec
FC8600 Series SPECIFICATIONS FC8600-160 Maximun cutting area: Mountable media width: Number of push rollers: Maximum cutting speed:
10 mm x 50 m 770 mm min 5 0mm 2 rollers 1485 mm/s (at 45º direction)
FC8600-130 Maximun cutting area: Mountable media width: Number of push rollers: Maximum cutting speed:
1372 mm x 50 m 1529 mm min 120 mm 3 rollers 1485 mm/s (at 45º direction)
Best performing cutter in its class
Labels/Stickers (Print & Cut in small size)
Apparel pattern paper
Window display (Indoor and outdoor signage)
Window display with graphics (Print & Cut in large size)
*Using cutting blade CB15UA or CB15UA-K30 is recommended. In some grades of reflective film, reinforcing the backing sheet of the media is recommended.
Dual configuration
Segment area compensation
Save two (2) user settings with eight (8) condition settings for each user. A fast access key allows quick switching between users. One cutter can be shared by multiple users or for multiple purposes. Using by two users User 1
User 2
Traffic sign (High-intensity reflective film)*
Using multiple type of media Media 1
Switching
Media 2 Switching
Using different application software Application software 1
Application software 2 Switching
2 tool configuration forcutting & plotting(Option) It holds both a pen for plotting and a blade for perforated cutting. The tool is automatically switched for cutting and plotting as needed.
The 4-point axis alignment is performed for each segmented area. In Normal Mode, this is performed by reading the mark in the middle of the feeding direction for the entire graphic and then cutting the entire graphic, provides high-precision alignment for long length Print & Cut applications. In the new Sequential Mode, contour cutting is performed sequentially in each segmented area. Media movement is limited to the smaller area being cut, improving accuracy and tracking for heavier media or media that has been laminated. Printed media
Nomal Mode
Additional marks
Axis alignment is performed for each segmented area and contour cutting is performed on the entire graphic.
Sequential Mode
The media stocker can be added for storing multiple roll media (Option, up to three) The media can be loaded from the rear or front by changing the direction of the standPlug
Built-in network interface The USB 2.0 (Hi-Speed), RS232C and Ethernet(10BASET/100BASE-TX) are built in as standard. Multiple interfaces enable various connectionssuch as a single PC to single plotter and multiplePCs to multiple plotters. The Ethernet connection also allows sharing of the cutter over a network.
16
Axis alignment is performed for each segmented area and contour cutting is performed sequentially on each area.
Graphtec FC4500
SPECIFICATIONS FC4550-50 Maximun cutting area: Mountable media width: Cutting plessure: Maximum cutting speed:
590 x 430 mm 500 mm Max 5,88N 600gf 750 mm/s (at 45º direction)
Suitable for prototyping or small production runs in rigid materials
Packaging
Sticker
Sign, Stencil, Traffic Sign
Garment, Shoes
Monument
Industrial Goods
2-Tool holders for easy selection Two tools can be mounted at the same time for easy switching. If the cutter blade and the creasing tool are mounted at the same time, cutting and scoring operations are performed automatically for higher productivity. Note: The second tool is held by magnetic force on the FC4550-50 so the choice of tool is limited. Simple creasing function A simple function to create fold lines for clean folding on micro-flute and cardboard has been enabled. • Up to three fold lines can be selected. • If two or three fold lines have been selected, the spacing between the lines can also be specified. • Repeated creasing operations can also be specified for each of the lines. The spacing between the two lines indicated by the arrows should be approximately equal to the thickness of the substrate.
However, the type of substrate being scored and the temperature and humidity of the working environment can all affect the ideal value. Please adjust the settings to suit your own conditions. How to determine the number of creasing lines • Single-line : Substrates up to 0.1 mm thick • Double-line : Paperboard 0.1 to 0.5 mm thick • Triple-line : Rigid cardboard 0.3 to 0.5 mm thick Advanced reverse-side cutting / creasing function Cutting and creasing can be carried out from reverse-side when using the registration marks. This prevents crease line from appearing on the printed surface. Tangential emulation Graphtec’s proprietary tangential emulation provides precise and clean cutting even on thicker material, ensuring sharp edges and corners.
17
Graphtec FC2250
SPECIFICATIONS FC2250-60VC Maximun cutting area: Mountable media width: Cutting plessure: Maximum cutting speed:
610 x 920mm 950 mm Max 9,80N 1kgf 400 mm
Medium to Large Flatbeds with Automatic RMS
Packaging
Sticker
Sign, Stencil, Traffic Sign
Garment, Shoes
Graphtec FC2250 FEATURES Dual Head Design: 500/1000 grams Cutting Force 2 Media Hold down methods available: Electrostatic or Vacuum Operate in Horizontal or Inclined Model (Vacuum table-horizontal only) D-Cut Software imports DXF Datax Cutting Master Plug-in for Adobe® Illustrator 0.118’’(3mm) Blade for cutting thicker material up to E Flute New Optional Creasing Tool for Corrugated Media
Cutting Plotters Handle a Wide Range of Media Apparel patterns Compressed foam sheets Corrugated cardboards Packaging samples Containers and road signs Sandblast rubber templates Stencils, gaskets Packaging short run
18
Monument
Industrial Goods
Graphtec
Use original consumables! Item
Model Name
Cutting blade holder
PHP33-CB09N-HS
Cutting blade holder for CB09UB blade
Cutting blade holder
PHP33-CB15N-HS
Cutting blade holder for CB15U type blades without spring
Cutting blade holder
PHP35-CB09-HS
Cutting blade holder, metal tip for CB09UB blade
Cutting blade holder
PHP35-CB15-HS
Cutting blade holder, metal tip for CB15U type blades without spring
Cutting blade
CB09UA-5
Cutting blade, 0.9 mm, 45 degree, with spring, For Vinyl media up to 0.25mm Cutting blade holder: PHP31-CB09*/ PHP32-CB09N*
Cutting blade
CB09UA-K60-5
Cutting blade, 0.9 mm, 60 degree, with spring, For Ultra thin media Cutting blade holder: PHP31-CB09*/ PHP32-CB09N*
Cutting blade
CB09UB-5
Cutting blade, 0.9 mm, 45 degree, For Vinyl media up to 0.25mm Cutting blade holder: PHP33-CB09N / PHP35-CB09
Cutting blade
CB09UB-K60-5
Cutting blade, 0.9 mm, 60 degree, For Ultra thin media, Cutting blade holder: PHP33-CB09N / PHP35-CB09
Cutting blade
CB15U-5
Cutting blade, 1.5 mm, 45 degree, For Thick media up to 0.5mm Cutting blade holder; PHP33-CB15N / PHP35-CB15
Cutting blade
CB15U-5SP
Cutting blade, 1.5 mm, 45 degree, with spring, For Thick media up to 0.5mm. Cutting blade holder: PHP31-CB15B*/ PHP32-CB15*
Cutting blade
CB15U-K30-5
Cutting blade, 1.5 mm, 30 degree, For Sand-blast rubber or thicker media up to 1.5mm. Cutting blade holder: PHP33-CB15N / PHP35-CB15
Cutting blade
CB09-E
Cutting blade, 0.9 mm, 45 degree, Economy grade, For Vinyl media up to 0.25mm Cutting blade holder: PHP33-CB09N
Creasing tool
CP-001
Stick type, for cardboard
CP-002 CP-003 KF700-BK
Roller type, for cardboard Roller type, for corrugated board Water-based fiber-tip pen (Black)
KF700-RD
Water-based fiber-tip pen (Red)
KF700-BL
Water-based fiber-tip pen (Blue)
Pen holder
PHP31-FIBER
Pen holder for KF700 series pen
Oil-based ballpoint pen
KB700-BK
Pen (black)
Pen holder
PHP34-BALL
Pen holder for KB700 Pen.
Adhesive mat
CM-0002
Size 435 x 610 mm, 1 mm thick, for creasing
Adhesive sheet
CM-0003-R1A
Double-side coated roll, size 545 mm x 20 m
Cling mat
CM-0004
Low tack cling mat, size 435 x 610 mm
Cling mat
CM-0005
Micro suction cling mat, size 435 x 610 mm
Pen
* It is discontinued.
Image
Description
19
LAMINATORS
VIVID
MATRIX DUO SPECIFICATIONS
1” & 3” (25mm & 77mm) cores for laminating and encapsulating
Extension arms allowing 1000m rolls
Matrix DUO MD-460 Laminating Speed (m/min): Max Width: Temperature range (C): Warm-up Time: Weight:
1,4 m 460 mm 0-140 10 min 45 kg
Matrix DUO MD-650 Laminating Speed (m/min): Max Width: Temperature range (C): Warm-up Time: Weight:
1,4 m 650 mm 0-140 10 min 55 kg
High quality silicon rollers for even pressure
Easy-to-use digital control panel Safety guard
Optional Stand
Feed table with alignment guide
storage
Matrix Duo® is a multipurpose single/double sided roll fed system ideal for both laminating and encapsulating
Menus
Business Cards
Photo Books
Post Cards
Spot UV Effects
Brochures
Foiled Bespoke Prints
KEY FEATURES
• 1.4m/5ft a minute • 77mm/3” & 25mm/1” core • adjustable anti-curl bar • single sided lamination • encapsulation • double sided lamination • Quick set-up • Suitable for digital & litho prints
IDEALLY SUITED FOR • business cards • menus • brochures • posters & prints • book covers • and many more...
FILM PERFORATING SYSTEM
Designed to make your life easier, the perforator attaches to the top of the machine, to perforate the the film and make it easier to slit as your job comes out laminated at the back of the machine without the need for a knife/scissors.
ADDITIONAL MANDRELS
Extra mandrels are available as optional extras for both Matrix Duo models, to make the transition between gloss and matt, 25mm / 1” and 77mm / 3” core film quick and easy, again saving you time and enabling you to work more efficiently.
The perforator can be moved to perforate the film at whatever width you require.
21
VIVID
EASYMOUNT SPECIFICATIONS EASYMOUNT SIGN Laminating Speed (m/min): Max Width: Mounting Thickness (mm) Roller Diameter (mm) : Control Panel : Pressure Adjustment: Temperature:
4m 1600 mm 20 mm 130 mm LED Manual 0-60c
EASYMOUNT SIGN Laminating Speed (m/min): Max Width: Mounting Thickness (mm) Roller Diameter (mm) : Control Panel : Pressure Adjustment: Temperature:
6m 1600 mm 25 mm 130 mm Digital Manual 0-60c
LED Control Panel
Designed to perform and built to last
Signs
Car Wraps
Window Graphics
Board Mounts
Roll-Up Banners
COST EFFECTIVE
The versatility of Easymount® laminators makes them incredibly cost-effective, meaning you can now truly offer a one-stop shop for print and finishing. The range includes everything from entry-level models for those still finishing jobs by hand, to professional heavy-duty models that will cope with every application all day everyday.
VERSATILE APPLICATION
You can apply more than just laminates – the Easymount® range allows you to also lay down application tapes and vinyls, removing the need for squeegeeing by hand. The feed table also lifts up, making it easier to load rolls of material, increasing effectiveness and minimsing hassle.
EASY OPERATION
Designed for simple, high quality results in a matter of minutes with the minimum of fuss and training. It’s also extremely efficient – our patented pressure gauge handle, for instance, ensures that you choose the correct setting every time quickly and easily. Anyone can quickly operate an Easymount®.
22
Digital Control Panel
Pop-Up & Exhibition Graphics
LAMIDESK SPECIFICATIONS
Custom made according to your needs
Heigh adjustment
Working height can be adjusted from 850-1020 mm. You choose the table height that is right for you. This feature is included as standard equipment on each machine.
Roll holder TOP/SIDE With the roll holder, you can load your material very easily and quickly. It is not necessary to load the material on to the bar and secure it, you just have to lay it on top between the roll and the bar, pulling it around the roller, which is then lowered prior to commencing lamination. The Side roller can help you hold materials if you are preparing materials before lamination. This feature is included as standard equipment on each machine
Heatable roller Option-up to 60°C The heated roller has been standard in Roll Laminators for many years – this provides the advantage of avoiding the “silvering effect’! Silvering effect means, that you have encapsulated air, so the glue is not connected to the print on tiny parts of your print material. When working with selfadhesive films, the heat will warm up the glue, so it will fill up the “rough” surface of paper or vinyl. The effect is, that you will have less air encapsulated and the result is more brilliant. If you are mounting prints behind glass or plexiglass you would need to have a heated roller because the glue should be absolutely transparent. The heated roller would provide a perfect result.
LED illumination Option The machine comes with a table illuminated by LED strips, giving it an even light coverage of the whole working table. Not only do LED’s minimize power consumption, but they offer proven long life. The LED’s are mounted on a steel assembly secured to cross ties and plugged into the next unit. In the event of an occasional LED failure, illumination still remains effective. In the long term, should the LED strips need replacing, this is simple to do and spares are readily available.
23
LASER SYSTEMS
24
CADCAM
FB SERIES LASERS SPECIFICATIONS Cutting speeds: Cutting sieze: Power: Axial speed: Acceleration: Resolution: Software: Air assist nozzle: Cutting bed: CE Mark:
600 mm/sec 725x500 mm - 1200x2400 mm 30 – 200 wats 0,2 mm/s - 1000 mm/s up to 2 g 0,025 mm ApS-Ethos Cutting Composer with compressed air port stainless steel honeycomb or Blade bed (for plastic) Class 1 Interlocked Laser for safe use Optional visiblered pointer
Professional Software for Embroidery Design, Laser Cutting and Laser Engraving Industries.
APS-ETHOS SOFTWARE
The Cutting Composer Software is the ideal accompaniment to FB series of Laser Cutting Machines. It employs a radical new approach to output control which ensures that maximum productivity can be achieved from the FB Laser system. The Cutting Composer allows a wide selection of Vector formats to be imported or sent directly into Ethos form Corel Draw or Adobe Illustrator. Alternatively vector files can be created in the software using the many automatic drawing tools available.
CADCAM FB SERIES LASERS
Many industries are now finding that laser cutting technology is far superior to other cutting methods and CadCam CNC laser cutting machines have proved to be successful in all types of markets from automotive to textiles. FB series laser cutting systems demonstrate the precision to cut a wide variety of materials.
OPTO CUT
Optical Recognition Software is available for Opto Cut machines. Sophisticated software uses a camera to detect registration marks, cutting with compensation for fabric stretch and distortion.
The FB series lasers can cut a wide variety of materials like acrylic, mdf, ply, cardboard and paper. You can also engrave and raster images onto surfaces such as wood and plastic. The control of cutting is so accurate you can engrave onto paper. The air irrigation system attached to the cutting head sends a stream of air or inert gas to the point of cut, this enables you to achieve a consistently clean cut.
25
FINISHING SOLUTIONS
STAHLS
MAXX™ SERIES Because of the high opening angle of the MAXX™ heat presses, it offers simple and risk free placement of garments. However, not only are the MAXX™ Series of heat presses extremely economical, and easy to use, they also provide an unbeatable priceperformance ratio!
CLAM BASIC FAMILY The Clam Basic press is the ideal entry-level press, with a winning price-performance ratio. This press has a digital display for both temperature and time, and is very easy to use. The Clam Basic is also ideal as a back-up press.
The MAXX™ series is available in three sizes: The space saving version with a 28 x 38 cm platen; the middle version is 38 x 38 cm; and for larger prints there is a 40 x 50 cm platen. In addition, there is also a MAXX™ Cap press available with a platen size of 16 x 9 cm.
The Clam Basic is available in the following sizes: The small version has a platen size of 28 x 38 cm; the middle version 38 x 38 cm; and the larger version has a platen size of 40 x 50 cm. The Clam Basic family also offers the Clam Basic Cap Press.
Decorate T-shirts
Decorate uniforms
Decorate caps
Decorate bags
27
KEENCUT
KEENCUT professional cutting machines – super-specialists in precision manual cutting solutions with 30th years experience in the industry. Engeneered for trouble-free operations, extremy accurace, a sizes to suit for any applications, with unique tools and possibilities. With 5 years quarantee and 20 year free replacement bearings! Professional equipment, whose quality speaks for itself!
SIMPLEX
SIM110
SIM160
SIM210
SIM260
SIM310
110
160
210
260
310
TECHNIC – Advanced Rotary Cutter Technic ARC
ARC107
ARC152
ARC203
ARC254
107
152
203
254
ARC305 305
TECHNIC TE – Advanced Rotary Cutter to fit to the Table Edge ARCTE100
ARCTE150
ARCTE200
ARCTE250
100
150
200
250
ARCTE300 300
FUTURA FLEXO
For safe, accurate cutting of flexo printing plates & packaging materials FLEX100
FLEX120
FLEX150
FLEX218
100
120
150
218
SABRE SERIES 2
New Single Cutting Head – General Purpose Cutter Bar on a base plate
Includes:
SAB100
SAB150
SAB200
SAB250
100
150
200
250
SAB300
1x Vertical Graphik Blade Holder (VABHG), 1x Vertical Medium Duty Blade Holder (VABHML) 1x Vertical Circular Blade Holder (VABHC)
28
300
KEENCUT JAVELIN-SERIES 2 High Precision Cutter Bar
JA2110 110
A
JA2160 160
JA2210 210
JA2260
JA2310
260
310
JAVELIN INTEGRA
High Precision Cutter Bar - New Single Cutting Head, Baseplate and Lift & Holds JIT160
JIT210
JIT260
JIT310
160
210
260
310
EVOLUTION E2
New Two Way Cutting Head – New Heavy Duty Blades EV2160 160
EV2210 210
EV2260
EV2310
EV2360
310
360
260
Includes:
2x Vertical Graphik Blade Holder (VABHG), 1x Vertical Medium Duty Blade Holder (VABHML) 1x Vertical Circular Blade Holder (VABHC)
CIRCULAR BLADE HOLDER • Product Code: VABHC • Supplied complete with Circular Blade •Replacement Circular Blades available in packs of 10. Product code CIR45 • Cold cut textiles and other delicate materials • Ideal for trimming thin strips off banners and posters where a knife blade would be too aggressive • Comes fitted with red blade guard to be engaged when not in use for optimum safety • Compatible with: Evolution E2, Javelin Integra, Javelin Series 2 and Sabre Series 2
MEDIUM DUTY BLADE HOLDER • Product Code: VABHML • Use standard off-the-shelf utility blades • Adjust to a blade depth of 10mm • Compatible with:Evolution E2, Javelin Integra, Javelin Series 2 and Sabre Series 2
GRAPHIK BLADE HOLDER • Product Code: VABHG • Accepts specially designed Keencut Graphik Blades • Adjust to a blade depth of 13mm • Compatible with:Evolution E2, Javelin Integra, Javelin Series 2 and Sabre Series 2 Accepts Keencut Graphik Blades designed specifically for the Signmaker and Digital Printer: • Specially designed knife edge for extra stability in tougher materials • Reversible so the holders can be set up to cut Left-Right or Right-Left • Increased durability and reduced tip breakage • Hard wearing • Oil-free
29
NEOLT
Manual Trim SPECIFICATIONS Max cutting thickness: Cutting length: Lenght: Weight:
0,8 mm 200 cm 224 mm 20,2 kg
Available Cutting thickness 0,8mm (100cm, 130cm, 150cm, 200cm, 250cm) 2,2mm (105cm, 145cm, 165cm, 210cm, 250cm) 4,5mm (130cm, 180cm, 230cm) TRIM is the manual cutter for every need, robust, complete, with unique technical features and available in a wide range of cutting measures. Thanks to the availability of sizes from 2 to 2.5 meters, Trim suits the business needs of small and medium digital print shops and service centers, in combination with large format inkjet printers or stand alone. The cutting thickness up to 0.8 mm allows you to easily trim cardstock-weight, lightweight plastics, PVC banners and many other printed or non-printed materials.
MAIN FEATURES
Trim is equipped with a cutting unit with rotating blade in hardened steel, stainless steel fixed blade and high transparency line sheet holder for a perfect positioning. The metal parts are painted with epoxidic powders, that guarantee high resistance to cuts and scratches.
SPECIFICATIONS Max cutting thickness: Cutting length: Lenght: Weight: Cutting Speed:
0,8 mm 200 cm 247 mm 46 kg 2m/sec
Available Cutting thickness ELECTRO light trim 0,8mm (100cm, 130cm, 150cm, 200cm, 250cm) ELECTRO Light Power trim 1,2mm (105cm, 145cm, 165cm, 210cm, 250cm) ELECTRO Power trim plus 2mm (145cm, 165cm, 210cm, 250mm, 300mm, 360mm) ELECTRO Strong trim Pro 4,5mm (165cm, 210cm, 260cm, 320cm) Electro Trim electric cutter is the most popular cutter among small digital printers, service centers and design agencies who are looking for a practical, safe, comprehensive and intuitive system to cut printed papers, adhesives, PVC banners and other light substrates.
MAIN FEATURES
Electro Trim is equipped with a rotating blade cutting head in hardened steel, mounted on a sliding tube. The metal parts are painted with epoxy powder that guarantee high resistance to cuts and scratches. The standard model includes a stand for ground positioning with adjustable feet, the container for the collection of waste and a lamp that illuminates the cutting area.
30
BANNER Finishing
Manual EYEPRESS Small, light weight hand press for processing of self-tapping eyes from 6,35 mm up to 18,2 mm diameter. Punches and eyes in one working process. Prepared for bench mounting or free standing
Adapters for Manual Eyepress High quality stainless steel adapter for a long life-time and high accuracy.
EASYPLAN 2 Hot air welder machine Hot air welding of different materials. Electronically regulated heating and digital display of air flow, temperature and welding speed.
EASY AIRPRESS Standard 4 It is operating with an external compressor with 4 to 8 bar (compression). The recommended pressure is 6 bar. The EMBLEM Airpress permits punch and eyes in one work procedure. Small dimensions of (WxHxD) 15cm x 24,5cm x 28cm and a weight of 7 kg. The mobile desk is an optional accessories. The adapter (die set) is not a purchased part and must be ordered seperatly.
31
DIGITAL RANGE
32
VIVID
The Peak range of pouch laminators are compact and affordable, helping you to minimise your costs and keep as much as possible in-house. The Linea is available in four sizes from A3 / 11x17” to A0 / 34x44”, so there’s a system to make sure you can keep your finishing costs in-house, saving time and costly outsourcing. The finish quality is superb, you can always rely on the Linea to do the job efficiently and smartly. Matrix systems are incredibly cost-effective, meaning you can now truly offer a one-stop shop for your customers. You can avoid the costly trips and set-up charges of outsourcing to the print finisher on the other side of town. So you can increase the service you offer and cut your expenses – all with no delays too. Matrix offers you the ideal investment in finishing your digital and litho print work – on demand – for brochures, menus and business cards. The Trimfast Ream Cutters are an ideal addition to your workspace for when you need to cut up to 800 sheets of paper, safely and efficiently. The Trimfast guillotines are easy to use and built to last. There is a model to suit every application from occasional use to every day heavy duty work The Magnum creasers are heavy duty and built to withstand the rigours of everyday use. Not only are they heavy duty, they are functional with the added option of being able to perforate as well. Available in fixed and variable speed options, as well as a fully programmable model, a built in counter and LED display makes them ideal for regular runs without wasting sheets. The systems also feature easy removable fold rollers for simple maintenance and cleaning. With our range of Magnum Commercial Binders, you can do the job quickly, easily and with consistent excellence. Designed for heavy usage, the binding system will increase your productivity, output and turnaround. A range of coloured foils and films, including Spot UVstyle and Glitter effects. Systems that add special effects during the finishing process give prints that extra ‘wow’ factor. These finishes are typically used on packaging, business cards, stationery, book covers, security print, wedding stationery and high end, bespoke print.
33
For personalized greeting and gift creation Dream it up. Cut it out.
Silhouette Cameo
Price:
290,00 EUR
Code: GT2305001
With Silhouette Cameo plotters you can produce creative and unique individual gifts – greeting cards, gift boxes, interior decorations, cut out the adhesive film and perform many other plotters related works.
Learn more!
Silhouette Curio Codeaq : GT2307001
Price:
280,00 EUR
Silhouette Curio – for hobby gift production. Easy start – just look at demo video and you are ready to start create and realize your greetings, gift packaging and decoration ideas.
Learn more!
FOR MORE INFORMATIONS, PLEASE CONTACT YOUR ANTALIS SALES REPRESENTATIVE.
www. antalis.ee www.antalis.lv www.antalis.lt
Follow us
Get inspiration!
Maintenance and repair is
just a call away. Our technical expertise has grown gradually since Antalis entered the Visual Communications Equipment market. We participated in numbers of trainings and workshops, got Certifications as Service Partners for the World famous brands, invested in our people, knowledge and tools. Antalis do not sell only Equipment but the whole solution for production workflow. We provide solutions for Raster Image Processing, printing, cutting, laminating, laser cutting, processing, welding, punching, binding and more – just name it! Antalis Team is able to make the ICC profiles for excellent color gamut and remarkable Ink savings. We will take care of equipment we have sold – maintenance and repair is just a call away. This catalogue shows only piece of our offer, if you need advice on equipment or service – ask your Antalis representative.
Just Ask Antalis!
We provide ICC Profiling Service with state of the ART SPECTRO SYSTEM.
Profilēšanas pakalpojumi – Spectro LFP logo teksts
www.antalis.ee • www.antalis.lv • www.antalis.lt
