Transcript
Extenix Corporation 21F, No. 106, Sec. 1, Sintai 5th Road, Xizhi District, New Taipei City, Taiwan, R.O.C. Tel: 886-2-2696-8648 Fax:886-2-2696-8647 E-Mail:
[email protected]
OPERATION MANUAL
ER-100CTU
MODEL:
SPECIFICATIONS FOR MODEL ER-100CTU GENERAL: 1. 2. 3. 4.
Digital processing AM & FM tuner. 100 preset memories for tuner AM 40, FM 60. CD with mechanic & electronic anti-shock,CD,CD-R,CD-R/W,MP3,USB&CARD MP3 available. Input/output A. Input: FM 75 ohm unbalanced antenna terminals AM loop antenna terminals. USB port for memory stick. SD/MMC card slot. the max. supported storage size of the medium (Stick/Card) max. size : 32G. B. Output: RCA JACK audio output for FM L and R channels.
RCA JACK audio output for CD L and R channels. 5. Power supply: 230V AC 6. Power consumption: 50VA 7. Weight: 3.95kg
8. Dimension: 482mm*44mm*250mm
CD SECTION 1. Operation performance
Items
Disc
Search time
TCD-792(A-BEX)
TOC read time
TCD-782
Ability to play with an eccentric disk
MCD-151A
Specifications Approx 6 seconds
Note From 1 track to 20 track
From turning on the Approx 6 seconds power to playing “01” on LCD Should be played Without noise
Ability to play with TCD-725B 800um an interruption (4 track)
Should be played Without noise
Ability to play with TCD-725B 800um a black dot (9 track)
Should be played Without noise
Ability to play with TCD-725B 65um fingerprints (13 track)
Should be played Without noise
2. CD Electrical performance
Items
Condition
Specifications
1. Output level
1KHz
0dB
1.2V ±2dB
2. Output level difference between channels
1KHz
0dB
Less than 2dB
3. Frequency response (using 1KHz 0dB as reference)
20Hz 100Hz 10KHz 20KHz
4. Separation
1KHz
More than 60dB
5. THD
1KHz
Less than 0.15%
6. S/N ration
1KHz
More than 80dB
±1dB ±1dB ±2dB ±3dB
* Addition: regarding items 4, 5 use 20KHz low-pass filter. Regarding item 6 use 20KHz low-pass filter and IHF-A curve filter.
3. CD Function explanation
Keys
Explanation
When this key is pressed during CD stop, play will start after track search. When this key is pressed during CD is playing, then it is changed to PLAY/PAUSE pause. When this key is pressed during CD is pausing, then it is changed to play. STOP FUNC
When CD is not stop, if this key is pressed then CD will stop. When this key is pressed .mode is change cyclically shown below. CD USB CARD
In stop mode: Change the starting play track (file) during stop mode, cyclic to the first track, if it is in the last track. In program entry mode: Change to the next track (file) for program select. In play mode, pause mode, program play mode, random play mode: UP/CUE Single pressed, skip the playing track (file) to next track (file) for normal play/pause mode, to next program index track (file) for program play/pause mode, to next random track (file) for random play /pause mode. Continue pressed, fast forward during play/pause when pressed more than 0.7sec. In stop mode: Change the starting play track (file) during stop mode, cyclic to the last track, if it is in the first track. In program Entry mode: Change to the previous track (file) for program select. DOWN/REV In play mode, pause mode, program play mode: Single pressed, skip the playing track (file) to precious track (file) for normal play/pause mode, to previous program index track (file) for program play/pause mode. Continue pressed, fast reverse during play/pause when pressed more than 0.7sec. In stop mode: Skip the starting play folder to next folder during stop mode, cyclic FOLDER to the first folder if it is in the last folder. -UP In normal play mode: Skip the playing file to the next folder’s first file. In stop mode: Skip the starting play folder to previous folder during stop mode, FOLDER cyclic to the last folder if it is in the first folder. -DOWN In normal play mode: Skip the playing file to the previous folder’s first file. In mp3 mode and in USB mode. If this key is pressed, PLAY mode is changed cyclically shown below. REPEAT REPEAT TRACK REPEAT FOLDER
Panel Remote
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
PLAY ALL PLAY ALL RANDOM REPEAT ALL In CD mode If this key is pressed, PLAY mode is changed cyclically shown below REPEAT TRACK REPEAT ALL
A-B EJECT PROG
MUTE
ESP
ID3 0~9;
PLAY ALL PLAY ALL RANDOM When this key is pressed during play, the beginning is marked. Press this key one more time, the end is also marked, and the set will play from the beginning to the end cyclically. Press this key again will delete the function. When this key is pressed, disc is moved out. Set to programming mode. When programming mode, [stop] key is pressed then program is all cleared. When this key is pressed during CD is playing, the set will mute the output. Press again, will recovery the output. In CDDA mode, Press “ESP” key, The ESP display lighted and the set is in electronic anti-shock state. The electronic anti-shock time is about 40 seconds. Press “ESP” key again, cancel the ESP function. When this key is pressed , the“ID3”in the LCD display will flash, and the ID3 TAG is displayed pressing this key again will cancel the ID3 function You can use these keys to select the track you want directly.
TUNER SECTION 1. TUNER Electrical performance specifications: 1-1. FM section Parameter
Value
Unit
Frequency range Sensitivity
87.5–108
MHz
6
uV emf
AM Suppression
38
dB
50
dB
45
dB
40
dB
400mV
mV rms
55
dB
Audio THD
0.1
%
FM step Frequency
50
KHz
Value
Unit
Adjacent Channel Selectivity Image Rejection Audio Stereo Separation Audio Output Voltage Audio(S+N)/N
1-2. AM section Parameter
√
√
√
√
√
√
√
√
√
√ √
Sensitivity Frequency range AM step Frequency
40 522–1620 9
uV emf KHz KHz
2. TUNER Function explanation
Keys
Explanation
1~10
When press these keys only, the tuner will jump to preset station 1~10.
+5
+10
DIRECT
DOWN UP MO/ST ASM
BAND
Panel Remote
Use this Key and number keys can get the preset station you want. For example: If you want to get preset station 8, press +5 key first, the LCD will display "+5” and flashing. Then press number key 3, you will get station 8. If you press "+5” key twice, the station will become the last number plus 5, for example, if right now the station number is 8. Press "+5”key twice, the station number will become 13.
√
√
√
Press this key once the preset station number will add 10. This is the direct search function. Press this key once, then use number key to input the station frequency, again press DIRECT key to confirm the frequency. The tuner jump to this station. If the input frequency is beyond the range, the tuner will display ERR. 1 press / 1 step tuning by" DOWN” "UP” key. When DOWN key is pressed for more than 1.5 seconds seek tuning is started. 1 press / 1 step tuning by" DOWN” "UP” key. When UP key is pressed for more than 1.5 seconds seek tuning is started. Press this key, the tuner change between stereo and mono mode. This is Auto search and memory function. Press this key for more than 1.5 seconds, the tuner will search the station and store in memory automatically. The receiving band is changed cyclically by pressing BAND key.
√
√ √
√ √ √ √
√
√
√
√
When SLEEP key is pressed, the sleep function is set and the time is displayed for 2 seconds. The sleep time is changed as shown below, every pressing the SLEEP key during the sleep time is displayed. 90 80 70 60 50 40 30 20 10 SLEEP
OFF The sleep mark is on during the sleep function is set. The sleep function is cleared, if the SLEEP key was pressed when the sleep time is not displayed and sleep function is set. The power is automatically off fatter sleep time, when sleep function is set.
MEMORY
M-DOWN M-UP
This key can call and write in preset memory. The FM band have fixed preset memory 60 CH. The AM band have the fixed preset memory 40 CH. The memory mode is set, when MEMORY key was pressed. The memory mode is released automatically after 5 seconds. The "MEMO” mark is flashed in the memory mode. A receiving frequency is written in the fixed preset memory, when "MEMORY” key is pressed after number keys was pressed in the memory mode. When this key is pressed, the preset memory is decrement. When this key is pressed, the preset memory is increment.
CD/TUNER Use this key to switch power between CD and TUNER
OUTLOOK & DIMENSIONS
√
√
√
√
√
√
√
