Transcript
ES1A - ES1D
ES1A - ES1D Features •
For surface mount applications.
•
Glass passivated junction.
•
Low profile package.
•
Easy pick and place.
•
Built-in strain relief.
•
Superfast recovery times for high efficiency.
SMA/DO-214AC COLOR BAND DENOTES CATHODE
Fast Rectifiers Absolute Maximum Ratings* Symbol
TA = 25°C unless otherwise noted
Value
Parameter
1A 50
1B 100
1C 150 1.0
1D 200
Units
VRRM IF(AV)
Maximum Repetitive Reverse Voltage Average Rectified Forward Current, @ TA=120°C
IFSM
Non-repetitive Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave Storage Temperature Range
30
A
-50 to +150
°C
Operating Junction Temperature
-50 to +150
°C
Tstg TJ
V A
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Thermal Characteristics Symbol
Parameter
Value
Units
PD
Power Dissipation
1.47
W
RθJA
Thermal Resistance, Junction to Ambient*
85
°C/W
RθJL
Thermal Resistance, Junction to Lead*
35
°C/W
*Device mounted on FR-4 PCB 0.013 mm.
Electrical Characteristics Symbol
TA = 25°C unless otherwise noted
Device
Parameter 1A
VF
Forward Voltage @ 1.0 A
trr
Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A Reverse Current @ rated VR
IR CT
Total Capacitance VR = 4.0 V, f = 1.0 MHz
2010 Fairchild Semiconductor Corporation
TA = 25°C TA = 100°C
1B
1C
Units 1D
0.92
V
15
ns
5.0 100
µA µA pF
7.0
ES1A-ES1D, Rev. C1
ES1A - ES1D
10
1.5 1.25
Forward Current, IF [A]
Average Rectified Forward Current, IF [A]
Typical Characteristics
1 0.75
RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED ON 0.2 x 0.2" (5.0 x 5.0 mm) COPPER PAD AREAS
0.5 0.25 0
0
25
50 75 100 125 Ambient Temperature [ºC]
150
0.01 TA = 25º C Pulse Width = 300µ µs 2% Duty Cycle
0.6
0.8 1 1.2 Forward Voltage, VF [V]
1.4
Figure 2. Forward Voltage Characteristics 1000
30 25 Reverse Current, IR [uA]
Peak Forward Surge Current, IFSM [A]
0.1
0.001 0.4
175
Figure 1. Forward Current Derating Curve
1
20 15 10 5 0
1
2
5 10 20 Number of Cycles at 60Hz
50
100
Figure 3. Non-Repetitive Surge Current
100
T A = 125 º C
10
TA = 75º C
1 T A = 25º C
0.1
0
20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage [%]
Figure 4. Reverse Current vs Reverse Voltage
Total Capacitance, C T [pF]
14 12 10 8 6 4 2 0 0.1
1 10 Reverse Voltage, V R [V]
100
Figure 5. Total Capacitance 50Ω NONINDUCTIVE
50Ω NONINDUCTIVE
+0.5A
trr
(-) DUT
50V (approx) 50Ω NONINDUCTIVE
Pulse Generator (Note 2)
0 -0.25A
(+) OSCILLOSCOPE (Note 1)
NOTES: 1. Rise time = 7.0 ns max; Input impedance = 1.0 megaohm 22 pf. 2. Rise time = 10 ns max; Source impedance = 50 ohms.
-1.0A 1.0cm
SET TIME BASE FOR 5/ 10 ns/ cm
Reverse Recovery Time Characterstic and Test Circuit Diagram 2010 Fairchild Semiconductor Corporation
ES1A-ES1D, Rev. C1
ES1A - ES1D
Package Dimensions
SMA / DO - 214AC
Dimensions in Millimeters
ES1A-ES1D, Rev. C1 2010 Fairchild Semiconductor Corporation
TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DenseTrench™ DOME™ EcoSPARK™ E2CMOSTM EnSignaTM FACT™ FACT Quiet Series™
FAST FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™
OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER
SMART START™ STAR*POWER™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET
VCX™
STAR*POWER is used under license
DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification
Product Status
Definition
Advance Information
Formative or In Design
This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. H4
