Transcript
http://www.fujisemi.com
ESAD83-006R
FUJI Diode
Schottky Barrier Diode Maximum Rating and Characteristics Maximum ratings (at Ta=25˚C unless otherwise specified.) Item
Symbols
Repetitive peak reverse voltage Average output current Non-repetitive forward surge current** Operating junction temperature Storage temperature
Conditions
Ratings
Units
VRRM
-
60
V
Io
50Hz Square wave duty =1/2 Tc = 119˚C
30 *
A
IFSM
120
A
Tj
Sine wave, 10ms 1shot
-
150
˚C
Tstg
-
-40 to +150
˚C
Conditions
Maximum
Units
0.58
V
Note* Out put current of center tap full wave connection. Note** Rating per element
Electrical characteristics Item Forward voltage***
(at Ta=25˚C unless otherwise specified.) Symbols VF
IF = 12.5 A
Reverse current***
IR
VR =VRRM
20
mA
Thermal resistance
Rth(j-c)
Junction to case
1.2
˚C/W
Note*** Rating per element
Mechanical characteristics Item Mounting torque Approximate mass
1
Conditions
Maximum
Units
Recommended torque
0.4 to 0.6
N•m
-
5.5
g
ESAD83-006R
FUJI Diode
http://www.fujisemi.com
Outline Drawings [mm]
006
006
2
ESAD83-006R
FUJI Diode
http://www.fujisemi.com
Reverse Characteristic (typ.)
Forward Characteristic (typ.) 100
Tj=150°C 100
Tj=125°C 10 10
IR Reverse Current (mA)
IF Forward Current (A)
Tj=150°C Tj=125°C Tj=100°C Tj=25°C
1
Tj=100°C
1
Tj=25°C 0.1
0.1 0.01
0.01 0.0
1E-3
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0
1.0
10
20
VF Forward Voltage (V)
Forward Power Dissipation (max.)
50
60
70
14
VR
12 I0
18
λ
α
11
16
DC
360°
13
360°
20
Reverse Power Dissipation (W)
10
14
Square wave λ =60° 12
Square wave λ =120° Sine wave λ =180°
10
Square wave λ =180° DC
8
PR
Forward Power Dissipation (W)
40
Reverse Power Dissipation (max.)
22
WF
30
VR Reverse Voltage (V)
6
9 8 7
α =180°
6 5 4 3
4
2 2
1
Per 1element 0
0 0
2
4
Io
6
8
10
12
14
16
0
5
10
15
20
VR
Average Output Current (A)
3
25
30
35
40
45
Reverse Voltage (V)
50
55
60
65
ESAD83-006R
FUJI Diode
http://www.fujisemi.com
Current Derating (Io-Tc) (max.)
Junction Capacitance Characteristic (typ.) 10000
160 155 150 145 140
DC
130 125
Sine wave λ =180°
120
Square wave λ =180°
115 110
1000
Cj
Tc
Square wave λ =120°
Junction Capacitance (pF)
Case Temperature (°C)
135
105 100 360°
95 90
I0
Square wave λ =60° VR=30V
λ
85 80 0
5
10
15
20
25
30
Io Average Output Current
35
40
100
45
10
(A)
VR
:Conduction λ angle of forward current for each rectifier element Io:Output current of center-tap full wave connection
Surge Capability (max.)
IFSM Peak Half - Wave Current (A)
1000
100
10 1
10
Number of Cycles at 50Hz
4
Reverse Voltage (V)
ESAD83-006R
FUJI Diode
http://www.fujisemi.com
Transient Thermal Impedance (max.)
Transient Thermal Impedance (°C/W)
101
Rth j-c:1.2°C/W 100
10-1
10-2 10-3
10-2
10-1
t
100
Time (sec)
5
101
102
ESAD83-006R
FUJI Diode
http://www.fujisemi.com
WARNING 1. This Catalog contains the product specifications, characteristics, data, materials, and structures as of March 2010. The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be sure to obtain the latest specifications. 2. A ll applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Systems Co., Ltd. is (or shall be deemed) granted. Fuji Electric Systems Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which may arise from the use of the applications described herein. 3. A lthough Fuji Electric Systems Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your design fail-safe, flame retardant, and free of malfunction. 4. T he products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has normal reliability requirements. • Computers • OA equipment • Communications equipment (terminal devices) • Measurement equipment • Machine tools • Audiovisual equipment • Electrical home appliances • Personal equipment • Industrial robots etc. 5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below, it is imperative to contact Fuji Electric Systems Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment becomes faulty. • Transportation equipment (mounted on cars and ships) • Trunk communications equipment • Traffic-signal control equipment • Gas leakage detectors with an auto-shut-off feature • Emergency equipment for responding to disasters and anti-burglary devices • Safety devices • Medical equipment 6. Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment (without limitation). • Space equipment • Aeronautic equipment • Nuclear control equipment • Submarine repeater equipment 7. Copyright ©1996-2008 by Fuji Electric Systems Co., Ltd. All rights reserved. No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Systems Co., Ltd. 8. If you have any question about any portion in this Catalog, ask Fuji Electric Systems Co., Ltd. or its sales agents before using the product. Neither Fuji Electric Systems Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions set forth herein.
6
