Transcript
SLP-TX403 mini label printer
Ask us! Manufacturer: BIXOLON, South Korea (a former SAMSUNG division). 300 dpi high print quality. Casing colours: light grey or dark grey (by default – dark grey). Mechanically strong (made of ABS plastic) printers, a little bit larger than similar printers of other manufacturers, easy to replace print material and ink ribbons, easy to clean. Specific features:
Two printing modes: thermal transfer and direct thermal (a thermal transfer mode: a print head heats an ink ribbon causing ink to deliquesce and stick to a paper surface; a direct thermal mode: a print head heats the surface of special heat resistant paper causing paper to change its colour) SLP-TX403 – fast operating. Max print speed: 127 mm/s Fits for 74 m length, ½” core and 300 m length, 1” core ribbons Identification of “stolen” labels: a printer does not stop operating if a label tape is short of a label, further pulls a blank tape and continues printing on further labels Print language support: EPL2, ZPL2, SLCS, ESC/POS Pause and task termination key.
Technical specifications:
Print width: 106 mm Max print speed: 127 mm/s Print resolution: 300 dpi Min label tape width: 25 mm Label height: 6 mm to 300 mm Ribbons: wax, wax-resin based, resin based Computer connection via LPT, USB and COM A fixed translucent label gap photo sensor An adjustable reflective black mark photo sensor Print temperature: 0 – 40°C Casing dimensions: 310 mm depth, 214 mm width, 195 mm height Printer weight: 2.85 kg.
Accessories:
Optional supplementary PC connection interfaces over Ethernet, WLAN, Bluetooth A label cutter, a label remover, RTC (a real time clock), an outer roll holder.
