Transcript
ESB-6042
ESB Series Elytone Standard Product ESB-6042
4x 3" Full Range Driver @ 4 ohm Drive units
2x 1" Tweeter @ 6 ohm 1x 6" Subwoofer @ 8 ohm
Power input voltage
Universal AC 100V-240V, 50-60Hz
Rated power consumption
60W
Standby power consumption <0.5W Wire Connectivity: 2 x HDMI inputs 1 x HDMI output (supporting ARC)
Inputs
1 x 3.5mm Aux-in 1 x RCA in 1 x Optical 1 x Coaxial Wireless Connectivity: Bluetooth Wifi (Airplay, DLNA)
Outputs Sound Effect Dimension
SKAA Subwoofer Out (RCA Phono) Subwoofer Out (Wireless) Sound Modes (DSP) x 4 Treble/ Bass Surround 1080(L) x85(W) x120(H) mm Elytone Electronic Co., Ltd.
ESB Series
SoundBar 2.1 system
SUBWOOFER SPECIFICATIONS ￭Load Impedance (Speaker)--------------------- 8Ω ￭Reference Frequency----------------------------- 50Hz ￭THD at 60W Rated Power----------------------- <1% ￭THD at 2/1 Rated Power------------------------- <0.2% ￭Input Sensitivity-------------------------------------410~470mVrms ￭SNR A Weighted----------------------------------- >90dB ￭SNR Unweighted ---------------------------------- >80dB ￭Residual Noise Floor------------------------------ <1.5mVrms ￭SUB Input Impedance --------------------------- 10 Kohms
WiFi FEATURES ￭Built-in IEEE 802.11n 150 Mbps ￭Support AP client mode and AP mode ￭I2S digital audio output Interface up to 2CH 16bits/48KHz ￭USB2.0 interface to connect Hi-End USB audio Soc ￭Co-processor supports up to 32bits/384KHz and DSD64/128 ￭Security: WEP, WPA-PSK, WPA2-PSK ￭Host-less design for AirPlay applications ￭AirPlay audio streaming/control ￭Apple's Wireless Accessory Configuration technology ￭APP or web browser for easily configuration ￭DLNA audio renderer ￭Auto grouping for multiple speakers application ￭Paring 2 audio module to L/R Speaker ￭I2C for connecting to customerized MCU ￭OTA firmware upgrade ￭Allow iPhone /iPod Dock share one Apple CP
Apple Airplay Audio for MFi Customer
DLNA renderer Built-in following audio decoder (MP3,DSD,WAV,WMA,W4A,Flac,AAC)
*Elytone is NOT responsible for licensing issue, please contact following organizations to license the audio CODECs. http://mp3licensing.com/royalty/software.html http://www.vialicensing.com/licensing/aac-fees.aspx http://windows.microsoft.com/en-us/windows/windowsmedia-components-licensing Elytone Electronic Co., Ltd.
Dimension
Elytone Electronic Co., Ltd.
Tone CTL Frequency Response
Elytone Electronic Co., Ltd.
Preset Memory Frequency Response
Elytone Electronic Co., Ltd.
Surround Response stereo
SUB Noise
Elytone Electronic Co., Ltd.
SUB Frequency Response
SUB THD
Elytone Electronic Co., Ltd.
MODEL: ESB-6042 SPECIFICATION: 2.1 Soundbar Speaker System SAMPLE No: S1 REVISION No: P1b DATE:2015-04-28 LINE VOLTAGE
Yes/No
Lo Line
Hi Line
US 120Vac/60Hz
120
108
132
EU 230Vac/50-60Hz
230
207
253
100
90
110
96
260
JAPEN 100Vac/50Hz Universal 100~240Vac/50~60Hz
YES
Parameter
R/L Spec.
Amp Section
R
L
Amplifier Type(Class AB,D,other)
D
D
Load Impedance(Speaker)
4
4
ohms
Rated Output Power(1%THD)
>30
>30
Output Power at 30W(R/L) & 60W (SUB)
<0.3
DC Offset
+/-30
Input Sensitivity
Unit
L CH
SE
SE
4
4
Watts
33.8
35.5
Aux Input,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, 20KHz LPF Requierd
<0.3
%
0.22
0.19
Aux Input,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, 20KHz LPF Requierd
+/-30
mV-DC
0.15
0.25
input without signal.
L
180
180
R
L
R-CH relative to L-CH)
>40
--
L-CH (relative to R-CH)
>40
--
R
L
AUX IN SNR with A-Weighted
>100
>90
AUX IN SNR without A-weighted
>100
AUX IN Residual Noise Floor
Input/output Impedance
Audio separation(Aux IN)
Signal to Noise
Line Input Impendance(Aux In)
R CH
L CH
170
170
R CH
L CH
dB
54
--
Aux Input,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, 20KHz LPF Requierd
dB
--
54
Aux Input,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, 20KHz LPF Requierd
R CH
L CH
dBr
128
130
Aux Input,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, 20KHz LPF Requierd
>80
dBr
123
125
Aux Input,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, SUB Frequency at 45Hz.20KHz LPF Requierd
<1
<1
mVrms
0.1
0.1
Aux Input off,Volume at Max,Tone at 0dB
R
L
R CH
L CH
mVrms
25K
25K
ohms
25K
<0.12
<0.12
ohms
0.089
Frequency Response (AUX IN)
R
L
EQ flat/Frequency Response
--
--
Tone Control
--
--
MOVIE
--
ROCK
output Impedance(Aux In)
Conditions
R CH
R
AUX input at 30W(R/L)
TEST VALUE
25K
Aux Input,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, 20KHz LPF Requierd
nominal
0.1049 nominal
R CH
L CH
dBr
--
--
Reference to AP curve
dBr
--
--
Reference to AP curve
--
dBr
--
--
Reference to AP curve
--
--
dBr
--
--
Reference to AP curve
MUSIC
--
--
dBr
--
--
Elytone Electronic Co., Ltd. Reference to AP curve
CLASSIC
--
--
dBr
--
--
Reference to AP curve
INTER 3D SURROUND
--
--
dBr
--
--
Reference to AP curve
Yes/No
Passed/ Rejected
Wifi function check
Yes
Passed
Apx BT TX out, Analog in,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz. 20KHz LPF Requierd
SKAA function check
Yes
Passed
Apx BT TX out, Analog in,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz. 20KHz LPF Requierd
Wireless Performance Response
Bluetooth Performance Response
R
L
R CH
L CH
Input Sensitivity at 30W(R/L)
170
170
mVrms
178
175
Apx BT TX out, Analog in,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, 20KHz LPF Requierd
SNR without A-weighted
>70
>70
dBr
76
73
Apx BT TX out, Analog in,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, 20KHz LPF Requierd
THD+N Ratio @ 10Watt Output
<0.1
<0.1
%
<0.07
<0.07
Apx BT TX out, Analog in,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, 20KHz LPF Requierd
Residual Noise Floor
<1.2
<1.2
mVrms
0.4
0.4
Frequency Response
--
--
dB
--
--
Sensitivity at 0.1% BER Coaxial Performance Response
<-85
dBm
R
L
Input Sensitivity at 30W(R/L) & 60W(SUB)
170
170
SNR without A-weighted
>70
THD+N Ratio @ 10Watt Output
Apx BT TX out without signal,Volume at Max,Tone at 0dB Reference to AP curve
-92
2.402GHz/2.441GHz/2.480GHz
R CH
L CH
mVrms
165
170
Apx Digital out, Analog in,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, 20KHz LPF Requierd
>70
dBr
75
74
Apx Digital out, Analog in,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, 20KHz LPF Requierd
<0.1
<0.1
%
0.065
<0.07
Apx Digital out, Analog in,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, 20KHz LPF Requierd
Residual Noise Floor
<1.2
<1.2
mVrms
0.3
0.3
Frequency Response
--
--
dB
--
--
Optical Performance Response
R
L
R CH
L CH
Input Sensitivity at 30W(R/L) & 60W(SUB)
170
170
mVrms
165
166
Apx Digital out, Analog in,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, 20KHz LPF Requierd
SNR without A-weighted
>70
>70
dBr
77.9
77.7
Apx Digital out, Analog in,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, 20KHz LPF Requierd
THD+N Ratio @ 10Watt Output
<0.1
<0.1
%
0.065
<0.06
Apx Digital out, Analog in,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, 20KHz LPF Requierd
Residual Noise Floor
<1.2
<1.2
mVrms
0.35
0.35
Apx Digital out without signal,Volume at Max,Tone at 0dB
Frequency Response
--
--
dB
--
--
HDMI 1 Performance Response
R
L
R CH
L CH
Input Sensitivity at 30W(R/L) & 60W(SUB)
165
165
mVrms
158
158
HDMI out, Analog in,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, SUB Frequency at 45Hz.
SNR without A-weighted
>70
>70
dBr
76
73
HDMI out, Analog inHDMI out, Analog inVolume at Max,Tone at 0dB, R/L Frequency at 1k Hz, SUB Frequency at 45Hz.20KHz LPF Requierd
THD+N Ratio @ 10Watt Output
<0.1
<0.1
%
0.065
0.065
Apx Digital out, Analog in,Volume at Max,Tone at 0dB, R/L Frequency at Electronic 1k Hz, 20KHz LPF Requierd Elytone Co., Ltd.
Residual Noise Floor
<1.2
<1.2
mVrms
0.4
0.45
HDMI out without signal,Volume at Max,Tone at 0dB
Frequency Response
--
--
dB
--
--
Apx Digital out without signal,Volume at Max,Tone at 0dB Reference to AP curve
Reference to AP curve
Reference to AP curve
HDMI 2 Performance Response
R
L
R CH
L CH
Input Sensitivity at 30W(R/L) & 60W(SUB)
165
165
mVrms
158
158
SNR without A-weighted
>70
>70
dBr
75
74
THD+N Ratio @ 10Watt Output
<0.1
<0.1
%
0.06
0.063
Apx Digital out, Analog in,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, 20KHz LPF Requierd
Residual Noise Floor
<1.2
<1.2
mVrms
0.42
0.45
HDMI out without signal,Volume at Max,Tone at 0dB
Frequency Response
--
--
dB
--
--
Remote Control & Key Button Standby Source Key Function Wifi-AP Wifi-WAC Wifi-Client SKAA-CTRL BT-Pair SKSS-Reset EQ-Movie EQ-Rock EQ-Music EQ-Classic EQ-Flat Surround on/off Memory Volume Reset
HDMI out, Analog in,Volume at Max,Tone at 0dB, R/L Frequency at 1k Hz, SUB Frequency at 45Hz. HDMI out, Analog inHDMI out, Analog inVolume at Max,Tone at 0dB, R/L Frequency at 1k Hz, SUB Frequency at 45Hz.20KHz LPF Requierd
Reference to AP curve
Yes/No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Passed/Rejected Passed Passed Passed Passed Passed Passed Passed Passed Passed Passed Passed Passed Passed Passed Passed Passed
Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational
Volume+ VolumeMute Play/Pause Prev Next Stop Bass+ BassTreble+ TrebleTreble/Bass Reset Wifi Vol+ Wifi VolSub Vol+ Sub Vol-
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Passed Passed Passed Passed Passed Passed Passed Passed Passed Passed Passed Passed Passed Passed Passed Passed
Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational Remote Hand Set Operational
Subwoofer Tx Pair
Yes
Passed
Remote Hand Set Operational
Sub Mute
Yes
Passed
Remote Hand Set Operational
AMP Mute
Yes
KEY FEATURE
Remote Hand Set Operational
Yes/No
configuration
Power switch
Yes
TACT SW
Locate at front Panel
SKAA switch
Yes
TACT SW
Locate at front Panel
Line RCA Input AUX Input Caxial Input Optical Input HDMI-1 Input HDMI-2 Input
Yes Yes Yes Yes Yes Yes
2P RCA Jack 3.5mm Phone Jack 1P RCA Jack Optical Receiver HDMI Socket HDMI Socket
Locate at rear Panel Locate at rear Panel Locate at rear Panel Locate at rear Panel Locate at front Panel Locate at rear Panel
Elytone Electronic Co., Ltd.
HDMI ARC Ethernet Input SUB Out AC SOCET
Yes Yes Yes Yes
HDMI Socket RJ-45 Socket 1P RCA Jack 8 Type AC Socket
power cord length
Yes
Removable type
Locate at rear Panel Locate at rear Panel Locate at rear Panel Locate at front Panel length:180mm
Power consumption
SPECIFICATION
Power-on Input Power
7.5
Mute Input Power
10.3
Watts
9.6
Rated voltage power supply
Power Cons@Rated Power
107
Watts
96.5
Rated voltage power supply
Protection
TEST VALUE Watts
Yes/No
7.1
R CH
Rated voltage power supply
L CH
Short Circuit Protection
Yes
Passed Passed
nominal
Thermal Protection
Yes
Passed Passed
nominal
Remark:
Elytone Electronic Co., Ltd.
SPECIFICATION: 60W SUBWOOFER AMPLIFIER SAMPLE No:1 REVISION No: P1A DATE: 2014/11/28 LINE VOLTAGE
Yes/No
Lo Line
Hi Line
Unit
US 120Vac/60Hz
Vrms
EU 230Vac/50-60Hz
Vrms
JAPEN 100Vac/50Hz Universal 100~240Vac/50~60Hz
Parameter
Vrms Yes
96
240
Specification
Unit
TEST VALUE
Vrms
QA TEST VALUE
Amp Section
Conditions Below testing is under 120Vac Line Input
Amplifier Type(Class AB,D,other)
D
Load Impedance(Speaker)
8
ohms
8
Max Unclipping Output Power(1%
>60
Watts
67
Volume at Max,Frequency at 50 Hz
THD at 60W Rated Power
<1
%
0.150
Volume at Max,Frequency at 50 Hz
<0.5
%
0.080
Volume at Max,Frequency at 50 Hz
+/-130
mV-DC
117
50
Hz
410~470
mVrms
440
Volume at Max,Frequency at 50 Hz, 60W Output
SNR-A-Weighted
>90
dBr
100
Volume at Max,Frequency at 50 Hz, 60W Output
SNR-Unweighted
>80
dBr
91
Volume at Max,Frequency at 50 Hz, 60W Output,20K
Residual Noise Floor
<1.5
mVrms
0.45
10
Kohms
10
Volume at Max,20K LPF filter required
<65
deg C
60
1/8 Rated power perature
THD at 1/2 Rated Power DC Offset
D
Input Sensitivity Input Frequency SUB Input
Volume at Max,Frequency at 50 Hz
Signal to Noise
Volume at Max,20K LPF filter required
Input/output Impedance SUB Input
Temperature Test 外部可碰觸的最高溫度(AMP 散熱 片正上方)
Frequency Response Frequency Response
Protect
Yes/No Yes
See AP curve
Yes/No
Speaker Driver Protection
Yes
Yes
Yes
Check Functional
Output Short Protection
Yes
Yes
Yes
Check Functional
Over Current Protection
Yes
Yes
Yes
Check Functional
Over Thermal Protection
Yes
Yes
Yes
Check Functional
Features Volume pot SUB Input LED Indicator power cord length
50 Hz 8 hours, 25℃ ambient tem-
Yes/No
configuration
Yes Yes Yes Yes
Trimmer 1P RCA Jack GEN/RED Bi- LED 6M
Locate at amp plate Locate at amp plate Locate at amp plate Fixed Type
Elytone Electronic Co., Ltd. Remark:
