Preview only show first 10 pages with watermark. For full document please download

Escea Ew5000 Specification Sheet

   EMBED

Share

Transcript

EW5000 Information Sheet for Builders and Architects For further information or specifications, visit the technical section of our website www.escea.com to view the latest product Installation Manual. Appliance Information Flue System 996mm 7 39 32" The flue system requires the use of 250mm Ø (9 7/8”) stainless steel flue and cowl. It is recommended to use a minimum of 3.6 meters (11 3/4 ft) of flue to create adequate draw and reduce the amount of smoke spillage out the front of the fireplace. Flue clearances must adhere to local codes. Flue parts can be provided by ESCEA at your local ESCEA retailer/supplier. 351mm 13 13 16" 224mm 13 8 16" Ø254mm Ø 10" 72mm 2 2732" 758mm 27 29 32" 644mm 3 25 8" 564mm 7 22 32" 7mm 9 32" 489mm 1 19 4" 1292mm 7 50 8" 62mm 7 2 16" Face of the Wall For outdoor use only 900mm 7 35 16" Cavity Dimensions The diagram to the right shows the recommended dimensions for the EW5000 cavity. Where possible, it is recommended that the cavity is made slightly larger than the dimensions shown to give the installer the maximum amount of space to work in. Note: The firebox does not slide in through this opening and has to be installed before the bricklaying is finished. 351mm 13 13 16" = = 760mm 15 29 16" 570mm to 610mm 7 22 16" to 24" Any combustibles in front of the fireplace need to be no less than 3 meters (9 7/8 ft) from the opening of the fire and 500 mm (19 3/4”) to each side. The fireplace must not be recessed. 1000mm to 1230mm 3 7 39 8" to 48 16" 490mm 19 932" 630211_1