Transcript
Satisfy Professional's Needs
Slide Compound Saw LS1013FL 255mm (10") / LS1214FL 305mm (12")
LIGHT&LASER Keep the worksurface bright
Let blade sink in red
Higher Accuracy Cutting Makita's unique laser system for easy cut line alignment
Independent laser switch
Fluorescent light on flexible arm
Laser guide • Laser emitter is mounted on the blade case, minimizing the misalignment between laser reference line and actual cut line. • Independent on/ off switch allows laser to be seen independently of blade rotation.
Independent switch • For a clear view of cutting lines, uses the inverter type that can throw bright light widely on and around workpiece. • Can be turned on / off by an independent switch.
Large Turn Base A variety of workpiece can be stably put on this large turn base. With the capacity of miter cuts up to 52 degrees right and 47 degrees left.
Bevel cuts with positive stop at 33.9 degrees left 0° 33.9° 45°
45°
Photo: LS1214FL
Adjustable Sub Fence
Pivots for supporting larger workpiece.
LS1013FLB
Laser line
*Cyclone system Clear air · Dust box is also available instead of Dust bag. Dust is separated from air · Employs cyclone system* by centrifugal force to prevent filter clogging, ensuring efficient dust collection, and transparent Dust box to Large sawdust confirm of collected dust
Can be projected on either side (Right/ Left) of blade, minimizing the misalignment between laser reference line and actual cut line caused by blade thickness.
Blade
Fine sawdust
Slide Compound Saw Double Insulation
Laser line
LS1013FL 255mm (10") / LS1214FL 305mm (12") Continuous rating Input Capacity
Electric Brake Dust Collecting Electronic Speed Control Blade diameter Soft Start Bevel Cutting 45 LR Laser Marker Built-in Job Light
No load speed Dimensions (L x W x H) Net weight Power supply cord
153
LS1013FL
LS1214FL
1,430W at 90 degrees : 91 x 310mm (3-5/8" x 12-1/4") at 45 degrees : 91 x 220mm (3-5/8" x 8-5/8") 255mm - 260mm (10"- 10-1/4") 3,700rpm 715 x 520 x 640mm (28-1/8" x 20-1/2" x 25-1/4") 22kg (48.5lbs) 2.5m (8.2ft)
1,650W at 90 degrees : 115 x 308mm (4-1/2" x 12-1/8") at 45 degrees : 115 x 218mm (4-1/2" x 8-5/8") 305mm (12") 3,200rpm 723 x 520 x 718mm (28-1/2" x 20-1/2" x 28-1/4") 24kg (52.9lbs) 2.5m (8.2ft)
Standard Equipment T.C.T Saw Blade, Vertical Vise, Socket Wrench, Hex. Wrench Triangular Rule, Dust Bag, Holder Set Items of standard equipment and specifications may differ by country or area.
Makita Corporation 3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan PRINTED IN JAPAN Z23250-2 2007-09
