Transcript
T E C H N I C A L
ESPII48
S P E C I F I C A T I O N
S H E E T
48/96 CHANNELS / 24 SCENE MASTERS MEMORY LIGHTING CONTROL CONSOLE
DESCRIPTION
Memory: Power supply: Consumption: Connector:
256 Kbytes Universal 100~240VAC ±10% , 47~63 Hz 40W typical IEC 3-pin with integral fuse, switch and mains filter Fuse: 2A M205/240V MIDI in: 5-pin DIN socket DMX out: USITT DMX-512/1990 protocol (RS-485 standard)/ AXR 5-pin socket Analogue out: 0 ~ +10V DC/ Socapex 337 socket (option) Desk lamp outputs: 2 12V current limited, AXR 3-pin socket; 10W max. Display: 32 character, 2 line LCD, green backlight Dimensions: 1180mm (W) 490mm (D) 108mm (H) Net/shipping weight: 15/18 kg
The ESPII 48 console is primarily designed for the control of devices featuring DMX input circuitry such as dimmers racks and colour scrollers. Units requiring an analogue input (0 to +10 volts) can also be controlled if the console is fitted with optional analogue outputs.
FEATURES * DMX 512 output to control dimmers, moving lights and colour scrollers * Wide mode doubles the number of channel faders to 96 channels * Add/solo functions on all channels and scene masters * Three proportional softpatches to 512 DMX channels * LCD window for operator feedback * Up to 498 memories * Up to 30 scene pages * Up to 30 chases * Live or blind editing
SUPPLIED ACCESSORIES
* Easy recording of scenes
• 2m IEC to Clipsal 463 power cable (export models may vary) • Operating manual
* Timed dipless crossfades
ORDERING INFORMATION MODEL/PART
* Console linking to JANDS STAGE / ESP II / EVENT / EVENT PLUS consoles
• • • • • • •
* CE approved: EN50081-1, EN50082-1, EN60950 *
OVERALL SPECIFICATIONS Control channels: Scene masters:
PART NO.
• ESP II 48
48 (normal), 96 (wide) 24
JND-ESPII48
M-card module
JND-OPM
VDU interface/M-card module
JND-OPVM-VGA
M-card
JND-MCARD
Floppy disk drive module (DOS format)
JND-OPFD-ESPII
Analogue output module
JND-OPA60
Desk lamp
CAE-18XR/CAE-18XR-Hi
Flightcase
JND-FC-ESPII48
PRESET 1 10
10
10
8
8
8
6
6
6
4
4
4
2
2
2
0
0
0
PRESET 2
69
22
70
23
71
24
10
10
10
8
8
8
6
6
6
4
4
4
2
2
2
0
0
0
25
72
73
26
74
27
75
28
76
29
77
30
31
78
79
32
80
33
34
81
82
35
36
83
37
84
85
38
86
39
87
40
88
41
42
89
90
43
44
91
ADD
D.B.O.
LATCH
SCENE MASTERS
INHIBIT
SOLO
OFF
OFF
FLASH
10 8
10 CURSOR
6 4 2
D.B.O.
OFF
REVERSE
SCENE
4
ON
2
0
0 MODE
10
10
8
8
6
6
4
4
2
2
SETUP
RANDOM
EXIT
4
15
16
17
18
19
20
21
22
23
24
RECORD
FUNCTION
0 CHASE
45
93
46
94
47
95
48
96
6
VALUE
EDIT
ALL
8
RATE ASSIGN
92
48/96 CHANNELS / 24 SCENE MASTERS MEMORY LIGHTING CONTROL CONSOLE
* 4 option ports (back panel)
FX
0
XF P1
ESP II 48 console
P2
FLASH
MASTER
ESPII24 48
* Effects (FX) section
T E C H N I C A L
ESPII48
S P E C I F I C A T I O N
S H E E T
48/96 CHANNELS / 24 SCENE MASTERS MEMORY LIGHTING CONTROL CONSOLE
ARCHITECTS & ENGINEERS SPECIFICATION Electronics
The control surfaces shall be scratch-resistant 0.25mm Lexan with legends reverse silk-screened from behind. All operator controls and displays shall be provided on the top operating surface of the console. The chassis shall have sufficient ventilation holes to allow adequate convection cooling of the power supply, provided the ambient temperature does not exceed 40˚C (104˚F).
The console shall provide control of up to 48 control channels (96 in wide mode) via the industry standard USITT DMX-512/1990 protocol. The DMX output socket on the back panel shall be a 5-pin AXR and the output voltages shall conform to standard RS-485 balanced serial data transmission. The console shall have a standard MIDI In 5-pin DIN connection.
Four (4) rear panel option slots shall allow the fitting of optional modules including M card/ video output/ analogue outputs and floppy disc drive.
The console shall have two (2) banks of preset faders and a flash button with an integral light emitting diode (LED) per channel to allow direct manual control of stage lighting intensity. In addition a liquid crystal display (LCD) shall be provided to enable the operator to view operating parameters and to edit in formation.
The console shall be the JANDS ESP II 48.
A memory capacity of no less than 256 Kbytes is required. The memory shall be battery-backed to prevent memory loss when switched off. The battery shall have a life of at least four (4) years.
108 mm
490 mm
0
2
4
6
0
8
2
10
4
6
8
10
The console shall incorporate design techniques and electronic filters to comply with Australian and European Union directives on electrical safety and electromagnetic compatibility (EMC).
0
2
MASTER
6
4
8
10
6
SCENE
ALL
8
D.B.O.
OFF
REVERSE
FLASH
OFF
SOLO
LATCH
0
2
4
XF
0
10 4
6
8
10
2
87
39 86
38 85
FX
37
CHASE
RANDOM
MODE
RECORD EXIT
FUNCTION
SETUP EDIT
VALUE
CURSOR
OFF
81
33
0
2
4
6
8
30
24
78
10
31
79
32
80
An error message shall be displayed to the operator should the software malfunction or be corrupted.
ON
34
82
35
83
RATE ASSIGN
36
84
0
2
4
6
8
10
PRESET 2
0
2
4
6
8
10
PRESET 1
The operating software of the console shall incorporate diagnostic test routines that exercise the different systems on the CPU card. These test routines shall indicate to the operator (using LEDs and/or displays) the result (pass/fail) of the tests.
P1
40
88
P2
41
89
Operation
ADD
42
FLASH
90
43
91
D.B.O.
INHIBIT
44
92
Three (3) proportional DMX soft-patches shall be available.
DESKLAMP
45
93
46
94
47
95
48
96
The console shall be factory tested and cyclically burned-in for a minimum of 24 hours.
16
23
15
70
22
14
69
21
13
68
0
2
4
6
8
10
20 67
19 66
18
10
8
6
4
2
0
10
8
6
4
2
0
65
17
4
9
DMX-512 OUT DESKLAMP
7
1
54
6 53
Specifications subject to change without notice. Manufactured by Jands Electronics Pty Ltd ACN 001 187 837. Note: While all due care has been taken in the preparation of this document, Jands Electronics shall not be liable for any inaccuracies or omissions which may occur herein.
TSS-ESPII48-0108-05
POWER
Jands Electronics Pty Ltd 40 Kent Road Mascot NSW 2020 Australia Phone: +61 2 9582 0999 Fax: +61 2 9582 0909 Internet:
[email protected]
ESPII48
100~240VAC 50~60Hz 0.5A FUSE: 2A M205/240V
5 52
4 51
3 50
2 49
1
The console shall be a free standing device and be 1180mm wide, 490mm deep and 108mm high. The console shall be constructed of 1.2mm steel, and shall be provided with a removable 1.2mm aluminium base for access to internal electronics. All metal surfaces shall be properly treated and finished in powdercoat or zinc dichromate passivating.
2
55
8
3
56
Mechanical
Manufactured in Australia by: JANDS Electronics Pty Ltd ACN 001 187 837
11 10 9 8 7 6 5
12 59
11 58 57
10
SCENE MASTERS
0 0
The console shall feature a desk linking function.
MIDI IN
12
64
16 63
15 62
14 61
2 2
13
4 4
60
6 6
0 0
8
2 2
8
4 4
10
6
PRESET 2
8
6
10
10
8
PRESET 1
10
A 12V current limited supply terminated on a 3-pin AXR socket shall be provided on the back panel to power a pair of optional desk lamps.
1180 mm
17
18
19
SCENE MASTERS
71
24
72
0
2
4
6
8
10
0
2
4
6
8
10
25
73
26
20
74
27
21
75
The console shall operate from a single-phase supply of 100 to 240 volts AC ±10% with a supply frequency of 47 to 63 Hz and shall not draw more than 50 watts of power from a normal power outlet. The power inlet shall be a switched and filtered IEC mains socket with integral fuse, located on the back panel of the console. The power supply shall be a universal-type switched mode supply requiring no changing of internal links to accommodate different supply voltages.
48/96CHANNELS / 24 SCENE MASTERS MEMORY LIGHTING CONTROL CONSOLE
28
22
76
29
23
77
Electrical
