Preview only show first 10 pages with watermark. For full document please download

Esr1221n Quick Installation Guide

   EMBED

Share

Transcript

Quick Guide Power On 1. Plug in the adapter to DC-IN jack and wait about 20 seconds for system to complete its process. 2. Wireless LED will be fully on when system is powered up and ready. Network Setup 3. Make sure your network interface on the PC/Laptop is configured to DHCP (Obtain an IP address automatically). Please refer to Chapter 2 for setup detail. Setup 4. Insert Wizard CD into your CD/DVD-ROM drive. Wizard will automatically start in a few seconds. Should there be any security prompt, please select allow or accept to proceed. 5. If Wizard does not start, please manually open the file “index.htm” using your default browser. 6. Please follow the instructions given by the Wizard on the screen to complete the setup. Thank you for choosing EnGenius