Ess-2000

Transcript

32-Port Serial/Parallel HIPPI 800 Switch I/O & COMMUNICATIONS ESS-2000 Features • High-speed standards-based connectivity • Efficient and effective data transfers between high-end workstations and servers • SNMP management for easy network integration by network administrators • Non-blocking 32x32 crossbar switch • Up to 32 simultaneous connections, providing a bandwidth of 800 Mb/s transmit and 800 Mb/s receive, for an aggregate bandwidth of 25.6 Gb/s • Supports hot-swappable MICs • Redundant, hot-swappable power supplies • Source and logical addressing • Modular design with single-side serviceability • Hunt group support for bandwidth aggregation between switches • SCC with integrated Ethernet management module • Supports HIPPI LE, TCP/IP, IPI-3, and character-driver API Essential ESS-2000, a 32-port HIPPI 800 switch, is a non-blocking, cutthrough crossbar switch for serial and parallel HIPPI network connectivity. The base chassis supports hot-swappable port cards, redundant power supplies, and single-side serviceability. The Switch Control Card (SCC) allows direct management of the switch through a RS-232 serial connection. Configuration access via telnet is provided by the native Ethernet interface on the SCC. Integrated switch management software, using SNMP, allows easy switch configuration, traffic routing, statistics gathering, alternate path routing, hunt group definition, and troubleshooting. Each of the switch’s 16 slots supports a dual serial or dual parallel Media Interconnect Card (MIC). Serial HIPPI MICs are available in both short serial (850 nM wavelength) and long serial (1300 nM wavelength) versions. The switch supports any combination of SBS MICs up to a maximum of 16. Multiple switches can be interconnected in a link-aggregation fashion potentially allowing very high switch-to-switch bandwidth transportation. With the lowest latency connection times in the industry and full ANSI compliance, the ESS-2000 has proven to be a cost-effective and efficient solution for entertainment and high-tech laboratory applications that need to rapidly move large volumes of data in realtime. ESS-2000 Configurations Model Number Specifications Media Types Supported • Multi-mode fiber (50/125 or 62.5/125) • Single-mode fiber (8/125) • Copper HIPPI cable Connectors • SC type for short and long wavelength MICs • 100-pin HIPPI connector for copper HIPPI cables Connection Latency • Less than 500 ns (single port) Technical Highlights • 19-inch rackmountable (slide kit available) • BER exceeds 10-12 ANSI Compliance • HIPPI PH (ANSI X3.183-1991) • HIPPI SC (ANSI X3.222-1993) • HIPPI Serial IEEE Compliance • Designed to VME64 extension chassis standards (IEEE 1101.1, 1101.10) Certifications • UL, CSA, CE, and FCC Class A Power • 110V/220V auto-sensing • 50-60 Hz; 10 A ESS-2000 Configuration 16-slot ESS-2000 chassis with SCC 32 controller and one power supply Available MICs (one MIC per two ports) ESS-002-SF Dual port serial HIPPI MIC ESS-002-LF Dual port long wavelength serial HIPPI MIC ESS-002-PP Dual port parallel HIPPI MIC ESS-002-SF-I Dual port serial HIPPI MIC installed in chassis ESS-002-LF-I Dual port long wavelength serial HIPPI MIC installed in chassis ESS-002-PP-I Dual port parallel HIPPI MIC installed in chassis Accessories/Spares SCC-2000 ESS-PWR-001 Spare Switch Controller Card Additional power supply ESS-SK-002 Rackmount slide kit ESS-CB-002 Cable management kit EHA-1-F/F Spare parallel Y-cable Serial MIC Specifications • Distance over 50.0-µm multi-mode fiber • Distance over 62.5-µm multi-mode fiber • Distance over 8- to 10-µm single-mode fiber Heat Dissipation • 800 Watts Size • 24” H x 19” W x 22” D • 14U Operating Temperature • 0˚ to 40˚ C Weight • 100 lbs fully configured Humidity • 5% to 95% non-condensing Corporate Headquarters European Headquarters 2400 Louisiana Blvd. NE, #5-600 Albuquerque, NM 87110-4316 Tel 505.875.0600 Fax 505.875.0400 Email [email protected] Memminger Str. 14 D-86159 Augsburg, Germany Tel +49-821-5034-0 Fax +49-821-5034-119 Email [email protected] For additional contact information, please visit our web site at www.sbs.com Specifications subject to change without notice. All trademarks and logos are property of their respective owners. ©2002 SBS Technologies, Inc. 20020802 Short Serial 500 m 200 m N/A Long Serial 1 km 1 km 10 km