Preview only show first 10 pages with watermark. For full document please download

Essential Freestanding Patio Heater

   EMBED


Share

Transcript

ESSENTIAL FREESTANDING PATIO HEATER User Manual English CONTENTS SAFETY FIRST Safety ........................................................................................................................... 3 Introduction ................................................................................................................ 4 Installation .................................................................................................................. 5 Operation .................................................................................................................... 6 Specifications .............................................................................................................. 7 --- WARRANTY --All our Patio Heaters come with a 2-year full manufacturer’s ‘collect and return’ warranty (from the date of purchase). Proof of purchase will be required to qualify for the warranty. The warranty can’t be transferred to a second owner. As part of our warranty agreement we take liability for collecting faulty items, as well as liability for any replacements and repairs. We’ll also be liable for the cost of returning the items to you. Please note that we’re not liable for any costs that are incurred by third party companies, including: builders or electricians. If the product has been tampered with or modified it will void the warranty. 2 WARNING - When using electrical appliances, basic safety precautions should always be followed. Failure to comply with these instructions may cause a fire, electrical shock or other injury to persons or property. 1. Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present. Children of less than 3 years should be kept away unless continuously supervised. 2. Children between 3 and 8 years old should only be allowed to switch the appliance on/off, provided that it has been correctly installed in its intended operating position and they have been given supervision or instruction concerning the safe use of the appliance and understand the hazards involved. They should not plug in, regulate, perform maintenance or clean the appliance. 3. Do not use this heater with a programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly. 4. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool. 5. Do not place the unit close to curtains and/or other flammable objects. 6. Do not cover the unit with anything during operation or before the unit has cooled down following shut down. 7. Do not wrap the power supply cord round the unit. 8. Do not use this unit in a place with poor air quality, i.e. dust, steam, gas, etc. 9. Do not use this unit as a clothes drier or towel drier. 10. Do not use this unit as a sauna heater. 11. Do not use this unit as a room heater. 12. Do not use this unit for animal heating or incubation. 13. Do not immerse the unit into water for cleaning. 14. The unit is at high temperature during operation. It keeps hot for a period after shut down. Potential danger would occur when touching it during this period. 15. The unit must be handled with care, and avoid of vibration or hitting. 16. The unit must be securely grounded during operation. 17. If damaged, the unit must be repaired by the manufacturer. 18. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 19. When assembling, keep clear from any board or flammable material. 20. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 21. Do not use on building sites, greenhouses, barns or stables or any environment where flammable dust may be present. 22. The head of the unit reaches high temperatures during operation. Always unplug the unit and wait until it is cool before cleaning. 23. The unit should be plugged in a socket, which is easily visible and reachable. 3 INTRODUCTION ASSEMBLY Offering an affordable, portable solution for warming your outdoor space, our freestanding Essential patio heater offers the performance of a wall-mounted unit but in a convenient, movable package. 1. As shown in Fig. A, put Lower Tube (#8) through the hole of Base (#9) making sure the end of Lower Tube with welded plate is downward, and the extra tongue is located in the sink of the base. 2. Fix Lower Tube and Base together with Washer (#10) & L Screw (#11). 3. As shown in Fig. A, Install Middle Tube (#8) on top of Lower Tube. Pullout Straight Tube (#5) upward from inside of Upper Tube (#5). Screw Outer Fastener (#4) clockwise to lock it. Then install Upper Tube on Mid Tube (#7). 4. As shown in Fig. A, Insert Straight Tube (#3) into the hole on bottom of Control Box (#1). Then fix them together with Screw M6*16 (#12). 5. As shown in Fig. A, Turn Outer Fastener (#4) counter-clockwise and adjust the unit to a desired height. Then fasten it clockwise. 6. As shown in Fig. A, clip Power Supply Cord with Cord Clips (#13). 7. As shown in Fig. C, the tilting of the heater is adjustable for 25º. Adjust it to a desired angle when necessary. Keep warm whilst dining, entertaining or just relaxing outdoors. Simply position the heater where you need it, plug in and with the flick of a switch, you and your guests will be toasty in no time at all. Rated at 2000W, the quartz element heater will warm a space of up to 9m2 – great for gardens or small patios. A pull-cord let’s you choose between 3 heat settings so you can get the temperature just right. Built to last, the quartz elements have a lifespan of over 5,000 hours, which should provide up to 20 years of normal use! The heater is fully-tested for outdoor use with a waterproof IP45 rating and comes with a robust, weighted base for the utmost safety. Features • • • • • • • • Powerful 2000W heater with 3 pull cord heat settings (650W/1300W/2000W) Long-lasting quartz heating element provides more than 5000 hours of heat Heat distribution area up to 9m2 Waterproof rating of IP45 making it suitable for outdoor use Comes complete with heavy-duty freestanding base Head can be tilted to the correct angle for optimal heat projection Safety features include heavy weight base and anti-tip safety cut out Solid steel construction, with a smart matt black finish Parts List & Diagram 1. Control Box 2. Drawing String 3. Straight Tube 4. Outer Fastener 5. Upper Tube 6. Screw M6*12 7. Mid Tube 8. Lower Tube 9. Base 10. Washer 11. L Screw 12. Screw M6*16 13. Cord Clip WARNING This heater is not equipped with a device to control the room temperature. Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided. 4 5 OPERATION SPECIFICATIONS Please follow the below instructions to operate your heater safely. NB - Assemble unit as per page 5 prior to operation. Heating Power: 2000W Heat Output Settings: 650W/1300W/2000W Product Dimensions: 485mm (W) x 1800mm (H) x 400mm (D) Product Weight: 10.7kg Heating Element: Quartz Tube Element Life: More than 5000 Hours Heat Distribution Area: Up to 9m2 Heating Angle: 140° Heating Distance: 2.5m Power Supply: 220-240v, 50/60Hz Power Cable Length: 180cm Power Connection: British Standard (BS) Plug Control Method: Pull Cord Control Function: Three Power Settings Casing: Black Finish Steel Construction Installation: Freestanding Adjustable Height: 165cm – 195cm Tilt Angle Range: 25° Safety Device: Tip-Over Protection Waterproof Rating: IP45 Insulation: Class 1 Certifications: CE, GS, IP45 Operating instructions ●● Connect the unit to the power supply Before operating, ensure the heater is set to ‘O’ (Off), if not - pull the pull cord until the display reads ‘O’. Next, connect the unit to a correctly rated power socket. ●● Turn Heater On To operate the heater, pull the pull cord once so the display indicates ‘L’, which means the heater is at low power level. Pulling the cord again activates medium power (display shows ‘M’). A further pull activates high power (indicated by ‘H’ on the display). ●● Turn Heater Off To switch off the heater, pull the cord until the display reads ‘O’ for off. 6 7 Optima Heaters, Unit 11, Aerodrome Close, Loughborough, LE11 5RJ 01509 323169 [email protected]