Preview only show first 10 pages with watermark. For full document please download

Ethernet Power Over Coaxial Extender With Pass Through Poe

   EMBED

Share

Transcript

Ethernet Power over Coaxial Extender with pass through PoE 15-EOC101PK FEATURES • IP transmission via coaxial cable pass through PoE • IP transmission pass through Inject power over an existing coaxial cable for overcome Ethernet distance limited • Compatible with IEEE 802.3af and 802.3at Power over Ethernet (PoE) • Support 10/100Mbps Ethernet with up to 600m transmission distance for coaxial RG6 Full-duplex communications • No PC configuration required, Plug & Play • Supports megapixel IP camera or other 10/100 Base-T IP devices NVR OR Transmission Distance with Power Delivered Power Not Delivered Using 4.5W 6.5W 8.5W 12W 18W PoE output Power Source Maximum Coax RG6. Data Link Distance DC56V Power Supplied 800m 600m 500m 400m 300m 200m 600m Switch HUB OR PoE IP Camera Coaxial Cable PC 15-EOC101PM 15-EOC101PS DC 56V / 1A NVR OR 800m Switch HUB IP Camera OR Coaxial Cable PC 15-EOC101PM 15-EOC101PS DC 56 / 1A SPECIFICATIONS Model Unit Type Extender Interface Connector Type Cable Type Max. Transmission Distance Ethernet Interface Connector Type Cable Type Rate Indicators Red LED Green LED Master Host Unit Slave Device Unit 1 x BNC 75-ohm RG59, RG6, or RG11 video-grade coaxial cable 600m for the RG6 coaxial cable 1 x RJ-45 Straight through or cross-over 10/100 Mbps for full duplexer Over Input Operating Voltage Output Voltage DC 56V / 1A N/A N/A IEEE 802.3af/at PSE@ RJ45 Port 2.8W 3.2W Power Consumption Mechanical & Environmental Operation -10°C ~ 60°C Temperature Humidity 20% to 85% RH. (non-condensing) Storage Temperature -25°C ~ 80°C Dimensions (W×D×H) 61 x 101 x 36.4 mm Weight 200g 200g ERROR: Coax Data Link Fail POWER: Power On Specification subject to change without notice.