Preview only show first 10 pages with watermark. For full document please download

Ethernet To Wifi Adapter Instructions

   EMBED

Share

Transcript

ethernet to wifi adapter instructions FGD-0250 Installation Instructions 1. Visit www.sensaphone.com/wifi-software, download and install the file: Engenius WiFi Locator & Configuration Software 6. Obtain either an IP address automatically using DHCP or enter a static IP address. Click Apply when done. 2. Click on the locator ICON 3. Click the Search button to find all available wifi antennas 7. Click the Web button to open the Antenna’s internal webpage. 8. You will be prompted for a username and password. The default is admin/admin 4. Highlight the antenna and select IP settings 9. Click Operating Mode and select Client Bridge 5. You will be prompted for a username and password. The default is admin/admin 10. Click Wireless Network and enter your wifi network’s SSID or choose Site Survey to search for it. Once found, double click the BSSID (mac address) 13. Wait for the progress bar to finish. 14. Verify connection status by clicking Connection Status from the left column. The connection status should read “Associated”. 11. Verify the SSID is correct and configure your security setting and passphrase. Click Accept when done. 12. Click Save/Reload under Status on the left column bar. Press Save and Apply. SENSAPHONE ® REMOTE MONITORING SOLUTIONS 901 Tryens Road • Aston, PA 19014 • PH: 877-373-2700 • ww.sensaphone.com