Preview only show first 10 pages with watermark. For full document please download

Evaluates: Max77826 Max77826 Evaluation Kit General Description Quick Start

   EMBED


Share

Transcript

Evaluates: MAX77826 MAX77826 Evaluation Kit General Description The MAX77826 evaluation kit (EV kit) is a fully assembled and tested PCB that evaluates the MAX77826 power-management IC. The MAX77826 includes 1 BUCK regulator, 1 BUCK-BOOST regulator, 15 LDOs (3 NMOS LDOs and 12 PMOS LDOs) and an I2C Interface. The I2C interface supports output-voltage setting , turning on/off of all regulators and reading interrupt/status registers. The MINIQUSB interface board can be used to enable PC communication through the USB interface board. Windows® 2000-, Windows XP®-, Windows Vista®-, and Windows 7-compatible software along with an extender board allows an IBM-compatible PC to use to the USB port to emulate an I2C 2-wire interface. This menu-driven program offers a graphical user interface (GUI) with control buttons. Features ●● Provides a Reference PCB Layout for Mobile Applications by Using Small Footprint External Components ●● Jumpers for Chip Enable (CE) ●● Jumpers for GPIO Enable for BUCK, BUCK BOOST, and LDO12 ●● Jumpers for Switching LDOs Input Supplies ●● Built-In 1.8V LDO for VIO Supply Windows, Windows Vista, and Windows XP are registered trademarks and registered service marks of Microsoft Corporation, Ordering Information appears at end of data sheet. 19-7658; Rev 0; 6/15 Quick Start Required Equipment ●● Variable power supply capable of supplying up to 5.5V ●● Multimeters ●● PC with a spare USB port ●● MINIQUSB+ command module (USB cable included) ●● MAX77826 EV kit Procedure The MAX77826 EV kit is a fully assembled and tested surface-mount board. Follow the steps below to verify board operation. Caution: Do not turn on the power supply until all connections are completed. 1) Visit www.maximintegrated.com/evkitsoftware to download the latest version of the EV kit software, xx.ZIP. Save the EV kit software to a temporary folder and uncompress the ZIP file. 2) Install the EV kit software on your computer by running the INSTALL.EXE program inside the temporary folder. The program files are copied and icons are created in the Windows Start | Programs menu. 3) Carefully connect the MINIQUSB+ command module with the MAX77826 EV kit by aligning the 16-pin connector J1 and 8-pin receptacle J2 of the MAX77826 EV kit with the 16-pin receptacle J3 and 8-pin header J4 of the MINIQUSB+ interface board, respectively. 4) Connect the USB cable from the PC to the MINIQUSB+ command module. 5) Preset the power supply to 3.7V. Turn off the power supply. 6) Connect the positive lead of the 3.7V power supply to the VBATT pad. Connect the negative lead of the 3.7V power supply to the GND pad. 7) Turn on the power supply. 8) Move Jumper JU6 from 2-3 to 1-2 (chip enable). 9) Start the MAX8904 program by opening its icon in the Start | Programs menu. The EV kit software main window appears, as shown in Figure 1. 10) Wait until seeing Command Module Connected, Device Connected as shown in Figure 1. 11) Click Turn on All Regulator button. 12) Verify that all regulators output default voltage. Evaluates: MAX77826 MAX77826 Evaluation Kit Detailed Description of Software The MAX77826 EV kit uses the MINIQUSB+ command module for an I2C interface to control the MAX77826 IC. The EV kit software displays six tabs to control and monitor status of the MAX77826 IC, INTERRUPT, STATUS, OPMD, CFG(1), CFG(2), and FREQ/UVLO/DEVICE_ID. INTERRUPT Tab The INTERRUPT tab sheet allows user to monitor interrupts (refer to MAX77826 data sheet for details) and mask each interrupt if needed. Figure 1. MAX77826 EV Kit Software (INTERRUPT Tab) www.maximintegrated.com Maxim Integrated │  2 MAX77826 Evaluation Kit Evaluates: MAX77826 STATUS Tab The STATUS tab sheet allows user to monitor status LDO, BUCK, and BUCK BOOST. Figure 2. MAX77826 EV Kit Software (STATUS Tab) www.maximintegrated.com Maxim Integrated │  3 MAX77826 Evaluation Kit Evaluates: MAX77826 OPMD Tab The OPMD tab sheet allows user to turn on/off LDO, BUCK, and BUCK BOOST. Also, it allows LDO and BUCK to be placed into LPM (low power mode). Figure 3. MAX77826 EV Kit Software (OPMD Tab) www.maximintegrated.com Maxim Integrated │  4 MAX77826 Evaluation Kit Evaluates: MAX77826 CFG(1) Tab The CFG(1) tab sheet allows user to change LDO output voltage (LDO1–LDO12) and turn on/off active discharge function. Figure 4. MAX77826 EV Kit Software (CFG(1) Tab) www.maximintegrated.com Maxim Integrated │  5 MAX77826 Evaluation Kit Evaluates: MAX77826 CFG(2) Tab The CFG(2) tab sheet allows user to change output voltage of LDO (LDO13–LDO15), BUCK, and BUCK BOOST. It also provides turn on/off active discharge function of each regulators and selects BUCK and BUCK BOOST operation modes. Figure 5. MAX77826 EV Kit Software (CFG(2) Tab) www.maximintegrated.com Maxim Integrated │  6 MAX77826 Evaluation Kit Evaluates: MAX77826 FREQ/UVLO/DEVICE_ID Tab The FREQ/UVLO/DEVICE_ID tab sheet allows user to change BUCK switching frequency and soft-start slew rate. Also, it provides interface to change UVLO_F threshold and read DEVICE_ID. Figure 6. MAX77826 EV Kit Software (FREQ/UVLO/DEVICE_ID) www.maximintegrated.com Maxim Integrated │  7 Evaluates: MAX77826 MAX77826 Evaluation Kit Detailed Description of Software BUCK Regulator The MAX77826 includes a 3A current-mode BUCK regulator. In normal operation, BUCK consumes only 22µA quiescent current. In low power mode, the quiescent current decreases to 8µA with reduced load capability. The summary of features is: ●● 3A (max) output current rating ●● 2.6V to 5.5V input voltage range ●● Output voltage range from 0.50V to 1.80V in 6.25mV steps ●● ±1% (typ) output voltage DC accuracy ●● 2MHz (typ) switching frequency ●● Automatic SKIP/PWM or forced PWM modes • 90% peak efficiency ●● Programmable slew rate for increasing output voltage settings BUCK BOOST Regulator The MAX77826 BUCK BOOST regulator utilizes a fourswitch H-bridge configuration to realize BUCK, BUCKBOOST, and BOOST operating modes. In this way, this topology maintains output voltage regulation when the input voltage is greater than, equal to, or less than the output voltage. The MAX77826 BUCK-BOOST is ideal in Li-ion battery powered applications, providing 2.6V to 4.1875V output voltage and up to 2A output current across the input voltage range. High switching frequency and a unique control algorithm allow the smallest solution size, low output noise, and highest efficiency across a wide input voltage and output current range. www.maximintegrated.com LDO Regulator The MAX77826 provides 15 low-dropout linear regulators, including 3 NMOS LDOs, 6 PMOSLV LDOs, and 6 PMOSLS LDOs. Each of these regulators draws 27µA / 18µA (NMOS / PMOS) of quiescent current in normal operating mode and < 5µA in Low Power mode. PMOSLV LDOs allow input voltages as low as 1.7V for optimized system efficiency. All regulators can be operated in Low Power mode which supports up to 5mA of maximum load current. The summary of features is: ●● 3 NMOS LDOs (VOUT Range: 0.6V to 2.1875V with 12.5mV Step) • 1 x 150mA • 1 x 450mA • 1 x 600mA ●● 6 PMOSLV LDOs (VOUT Range: 0.8V to 3.975V with 25mV Step) • 3 x 150mA • 3 x 300mA ●● 6 PMOSLS LDOs (VOUT Range: 0.8V to 3.975V with 25mV Step) • 3 x 150mA • 3 x 300mA ●● ±1.5% Typical Output Voltage DC Accuracy ●● 70dB PSRR at 1kHz Maxim Integrated │  8 Evaluates: MAX77826 MAX77826 Evaluation Kit Component List PART QTY DESCRIPTION PART QTY DESCRIPTION C1, C3 2 10μF ±10%, 6.3V, X5R ceramic capacitor (0603), Taiyo Yuden, JMK107ABJ106MA-L 10 3-pin header, Samtec, TSW103-07-L-S 9 4.7µF ±10%, 6.3V, X5R, ceramic capacitor (0402), Murata, GRM155R60J475KE19D JU1, JU2, JU3, JU4, JU5, JU6, JU10, JU12, JU13, JU14 JU7, JU8, JU9, JU11 4 2-pin header, Samtec, TSW102-07-T-S LB 1 5 1μF, 6.3V, X5R, ceramic capacitor (0402), Taiyo Yuden, JMK105BJ105KA 0.47μH inductor (2016), DCR = 37mΩ, ISAT = 3.5A, TOKO, DFE201610-H-R47N 3 22μF, 6.3V, X5R, ceramic capacitor (0603), Taiyo Yuden, JMK107BBJ226MA-T LBB 1 1μH ±30% inductor (2016), DCR = 60mΩ, ISAT = 3.6A, TDK, TFM201610GHM1R0MTAA R1 1 100kΩ resistor (0402) 2 0.1μF ±20%, 10V, X5R, ceramic capacitor (0402), Taiyo-Yuden, LMK105BJ104MA R2, R3 2 2.2kΩ resistor (0402) U1 1 PMIC (49 WLP) MAXIM, MAX77826 U2 1 Voltage Regulator (5 SC70), MAXIM, MAX8511EXK18+ C12, C16, C17, C18,C20, C21, C23, C24,C25 C19, C22, C28, C29, C30 C2, C4, C5 C26, C27 C6, C7, C8, C9, C10, C11, C13, C14, C15 9 2.2μF, 6.3V, X5R, ceramic capacitor (0402), Murata, GRM155R60J225ME19D CON1 1 20-pin, right-angle connector, Sullins, PPTC102LJBN-RC Component Suppliers SUPPLIER PHONE WEBSITE TDK 847-803-6100 www.comopnent.tdk.com Murata 770-436-1300 www.murata-northamerica.com Taiyo-Yuden 603-669-7587 www.t-yuden.com Sullins Electronics Corp. 760-774-0125 www.sullinselectronics.com Samtec 800-726-8329 www.samtec.com Toko 847-297-0070 www.toko.com Note: Indicate that you are using the MAX77826 when contacting these component suppliers. Schematic and PCB See the links for information on the schematic and PCB layout. ●● MAX77826 Schematic ●● MAX77826 PCB www.maximintegrated.com Ordering Information PART MAX77826EVKIT# MINIQUSB+ TYPE EV kit Command Module #Denotes RoHS compliant. +Denotes a lead(Pb)-free/RoHS-compliant package. Maxim Integrated │  9 Evaluates: MAX77826 MAX77826 Evaluation Kit Revision History REVISION NUMBER REVISION DATE 0 6/15 DESCRIPTION Initial release PAGES CHANGED — For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com. Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. © 2015 Maxim Integrated Products, Inc. │  10 6 5 4 3 2 1 VBATT1 VBATT [1] U1 VBATT A1 A2 6.3V SYS C2 C2 22uF 6.3V 0603 LB B2 1 E7 2 2.2k 0402 LXB VIO C3 C26 0.1uF 0402 LXB FB_B IRQB SDA 10V VIO Test Point Big, Red R1 JU7 1 Test Point Small, Red D4 INL4 F3 F6 G6 LBB OUTBB INL5 2 C23 4.7uF 6.3V C24 4.7uF 6.3V C25 4.7uF 6.3V 0402 0402 0402 LXBB2 LDO2 1V/500mA A4 C6 LDO1 Test Point Big, Red 1V/150mA LDO2 Test Point Big, Red LXBB2 LDO4 A5 D7 1V/300mA LDO3 Test Point Big, Red 1.5V/300mA LDO4 Test Point Big, Red 2 3 JU14 1 FB_BB LDO5 E4 B 3.3V/150mA LDO15 Test Point Big, Red LDO14 Test Point Big, Red LDO13 Test Point Big, Red E2 3.3V/300mA E1 3.3V/300mA LDO12 Test Point Big, Red D2 3.3V/150mA 2.8V/150mA LDO11 Test Point Big, Red C10 2.2uF 6.3V C9 2.2uF 6.3V C8 2.2uF 6.3V C7 2.2uF 6.3V C6 2.2uF 6.3V 0402 0402 0402 0402 0402 D1 G2 [1] VBATT LXBB1 VBATT ENL12 Test Point Small, Red C [1] LXBB1 LDO3 E5 C22 1uF 6.3V 0402 0402 LDO1 F4 F1 C21 4.7uF 6.3V 3.5V/2A G4 F2 OUTBB 1uH 60mohm,3.6A, 2016 VOUTBB 2 C4 22uF 6.3V 0603 G3 C7 PGNDBB 1 JU5 3 INL3 2 PGNDBB EXT-INL3 Test Point Big, Red 2 G5 B5 2 INL2 F5 1 JU3 3 B4 INBB 0603 2 4 6 8 10 12 14 16 18 20 VOUTB 2 INL1 VIO [1] 3 JU6 1 C4 1 JU2 3 F7 INBB 6.3V VOUTBB [1] D CON1 1 3 5 7 9 11 13 15 17 19 SCL Test Point Small, Red 10uF VOUTBB Test Point Big, Red 4 1 JU1 3 G7 C5 22uF 6.3V 0603 NC VLOGIC D3 [1] [1] [1] IRQB 1 ENBB CE PGNDBB Test Point Big, Black GND [1] 0402 E3 2 JU13 3 E6 C3 1P8V [1] C30 1uF 6.3V 0402 JU8 ENB SCL VBATT [1] 5 SHDN 1 JU4 3 D5 ENBB Test Point Small, Red OUT IN U3 3 2 SDA Test Point Small, Red ENB Test Point Small, Red C 1 R2 2.2k 0402 2 JU12 R3 [1] 1P8V VIO VBATT 1 C29 1uF 6.3V 0402 JU11 PGNDB 3 [1] 10V 100k B3 VOUTB [1] 2 MAXIM, MAX8511EXK18+T B1 0.47uH 35mohm, 4A, 2016 JU9 [1] REFBYP VBATT 1 [1] C27 0.1uF 0402 1.2V/3A VOUTB Test Point Big, Red VIO 3 VBATT [1] 2 D C5 PGNDB GND 2 1 Test Point Small, Red CON_20PIN_SMBUS PGNDB Test Point Big, Black REFBYP JU10 VLOGIC [1] C28 1uF 6.3V 0402 INB 0603 C1 A3 2 10uF INB 1 C1 VBATT [1] B7 ENL12 LDO6 LDO15 LDO14 LDO7 LDO13 LDO8 LDO12 LDO9 LDO11 LDO10 A7 1.8V/300mA LDO5 Test Point Big, Red C16 4.7uF 6.3V C17 4.7uF 6.3V C18 4.7uF 6.3V 0402 0402 0402 D6 G1 C20 4.7uF 6.3V B 0402 1.8V/150mA LDO6 Test Point Big, Red GND1 1.8V/300mA A6 B6 C19 1uF 6.3V 0402 LDO7 Test Point Big, Red GND2 1.8V/150mA LDO8 Test Point Big, Red 1.8V/150mA GND3 LDO9 Test Point Big, Red 2.8V/300mA LDO10 Test Point Big, Red C11 2.2uF 6.3V C12 4.7uF 6.3V C13 2.2uF 6.3V C14 2.2uF 6.3V C15 2.2uF 6.3V 0402 0402 0402 0402 0402 GND4 CL26-0P4MM-7X7 MAXIM INTEGRATED COMPANY: A A TITLE: M1 1 M2 DRAWN: MTHOLE MTHOLE M3 1 CHECKED: DATED: QUALITY CONTROL: DATED: RELEASED: DATED: CODE: M4 1 MTHOLE MAX77826 EV KIT SCH DATED: Jan 03 2014 1 MTHOLE SIZE: DRAWING NO: REV: C SCALE: P0 SHEET: 1 OF 1 M3 SCL SDAx1 JU8 R1 IRQB JU5 JU5x3 JU5x2 JU5x1 GND3 PGNDBBx1 ENBB ENB JU12x3 JU12x2 JU12x1 C3x1 C3x2 LBBx1 LBBx2 C4x1 C1x1 C1x2 LBx2 C1 C5x1 C4x2 C4C3 C5 LBB C5x2 C2 C2x1 LB U1 C26x1 C12x1 C12x2 C22x1 C18x1 C18x2 C22x2 C20x1 C20x2 C21x1 C28x1 C28x2 C21x2 C26x2 C26 C21 C22 C28C20C18C12 C11 C16 C23 C17 C17x2 C23x2 C16x2 C11x2 C17x1 C23x1 C16x1 C11x1 U1xG7 U1xF7 U1xE7 U1xD7 U1xC7 U1xB7 U1xA7 U1xG6 U1xF6 U1xE6 U1xD6 U1xC6 U1xB6 U1xA6 U1xG5 U1xF5 U1xE5 U1xD5 U1xC5 U1xB5 U1xA5 U1xG4 U1xF4 U1xE4 U1xD4 U1xC4 U1xB4 U1xA4 U1xG3 U1xF3 U1xE3 U1xD3 U1xC3 U1xB3 U1xA3 U1xG2 U1xF2 U1xE2 U1xD2 U1xC2 U1xB2 U1xA2 U1xG1 U1xF1 U1xE1 U1xD1 U1xC1 U1xB1 U1xA1 C6x1 C15x1 C25x1 C8x1 C7x1 C27 C13 C19 C14 LDO10 C14x1 C19x1 C13x1 C27x1 C14x2 C19x2 C13x2 C27x2 EXT-INL3x1 JU3x3 JU3x2 JU3x1 REFBYPx1 LDO5x1 LDO8x1 LDO6x1 LDO2x1 LDO6 REFBYP LDO8 LDO2 LDO5 LDO9 JU3 LDO4 EXT-INL3 LDO9x1 VBAT LDO1 LDO3 LDO7 GND1x21 LDO7x1 LDO3x1 LDO1x1 VVBATTx2 BATTx1 GGND4x2 ND4x1 C29x2 C29x1 M1x1 JU2x3 JU2x2 JU2x1 JU1x3 JU1x2 JU1x1 JU6x1 JU6x2 JU6x3 JU10x3 JU10x2 JU10x1 JU11x1 JU11x2 C30x2 C30x1 U3x4 U3x5 U3x3 U3x2 U3x1 JU10 JU6 JU1 JU2 M2 M2x1 LDO4x1 C10 C7 C9 C8 C24 C25 C15 C6 C6x2 C15x2 C25x2 C8x2 C7x2 LBx1 LDO12 VOUTB VOUTBx1 VIOx1 GND4 C24x2 C9x2 C10x2 C24x1 C9x1 C10x1 C2x2 LDO15 PGNDB PGNDBx1 LDO12x1 JU11 VBATT1 GND2 GND2x21 VBAT 1x2 LDO10x1 LDO14 LDO13 LDO13x1 LDO15x1 M4x1 DATE: ENBx1 VOUTBBx1 JU14 JU13 JU12 ENL12 ENBBx1 JU7 JU13x3 JU13x2 JU13x1 LDO11 VOUTBB PGNDBB LDO11x1 JU4x3 LDO14x1 VIO ENL12x1 JU4 JU4x2 JU4x1 U3 C30 JU14x3 JU14x2 JU14x1 JU7x2 JU7x1 R3x2 C29 GND3x2 GND3x1 JU8x2 JU8x1 R2x2 CON1 CON1x20 CON1x18 CON1x16 CON1x14 CON1x12 CON1x10 CON1x8 CON1x6 CON1x4 CON1x2 CON1x19 CON1x17 CON1x15 CON1x13 CON1x11 CON1x9 CON1x7 CON1x5 CON1x3 CON1x1 JU9x2 JU9x1 M4 JU9 IRQBx1 R1x2 R3x1 R2 R2x1 R3 R1x1 SDA SCLx1 M3x1 MAX77826 EVAL BOARD REV P0 PROPERTY OF INTEGRATED PRODUCTS LAYER Layer1-Top Component Layer ALL UNITS ARE IN 0.001" 3000.000mil M1 GND1 2900.000mil M3 M3x1 SDAx1 IRQB GND3 GND3x2 GND3x1 JU8 JU5 JU5x3 JU5x2 JU5x1 PGNDBBx1 ENBB ENB JU12x3 JU12x2 JU12x1 LDO9x1 LDO12 VOUTB VOUTBx1 LDO10 EXT-INL3x1 JU3x3 JU3x2 LDO8x1 REFBYPx1 LDO5x1 GND1x21 LDO7x1 LDO3x1 LDO1x1 VVBATTx2 BATTx1 VBAT LDO1 LDO3 LDO7 JU3x1 LDO6 REFBYP LDO8 LDO2 LDO5 LDO9 JU3 LDO4 EXT-INL3 LDO6x1 GND4 LDO2x1 GGND4x2 ND4x1 VIOx1 M1x1 JU2x3 JU2x2 JU2x1 JU1x3 JU1x2 JU1x1 JU6x1 JU6x2 JU6x3 JU10x3 JU10x2 JU10x1 JU11x1 JU11x2 JU10 JU6 JU1 JU2 M2 M2x1 LDO4x1 LDO15 PGNDB PGNDBx1 LDO12x1 JU11 VBATT1 GND2 GND2x21 VBAT 1x2 LDO10x1 LDO14 LDO13 LDO13x1 LDO15x1 DATE: ENBx1 VOUTBBx1 ENBBx1 JU14 JU13 JU12 ENL12 JU13x3 JU13x2 JU13x1 LDO11 VOUTBB PGNDBB LDO11x1 JU4x3 LDO14x1 VIO ENL12x1 JU4 JU4x2 JU4x1 M4x1 M4 JU9 JU14x3 JU14x2 JU14x1 JU7x2 JU7x1 JU7 JU8x2 JU8x1 CON1x20 CON1x18 CON1x16 CON1x14 CON1x12 CON1x10 CON1x8 CON1x6 CON1x4 CON1x2 CON1x19 CON1x17 CON1x15 CON1x13 CON1x11 CON1x9 CON1x7 CON1x5 CON1x3 CON1x1 CON1 IRQBx1 SCL SDA SCLx1 JU9x2 JU9x1 MAX77826 EVAL BOARD REV P0 PROPERTY OF INTEGRATED PRODUCTS LAYER Layer 2 - GND ALL UNITS ARE IN 0.001" 3000.000mil M1 GND1 2900.000mil M3 M3x1 SDAx1 IRQB GND3 GND3x2 GND3x1 JU8 JU5 JU5x3 JU5x2 JU5x1 PGNDBBx1 ENBB ENB JU12x3 JU12x2 JU12x1 LDO9x1 LDO12 VOUTB VOUTBx1 LDO10 EXT-INL3x1 JU3x3 JU3x2 LDO8x1 REFBYPx1 LDO5x1 GND1x21 LDO7x1 LDO3x1 LDO1x1 VVBATTx2 BATTx1 VBAT LDO1 LDO3 LDO7 JU3x1 LDO6 REFBYP LDO8 LDO2 LDO5 LDO9 JU3 LDO4 EXT-INL3 LDO6x1 GND4 LDO2x1 GGND4x2 ND4x1 VIOx1 M1x1 JU2x3 JU2x2 JU2x1 JU1x3 JU1x2 JU1x1 JU6x1 JU6x2 JU6x3 JU10x3 JU10x2 JU10x1 JU11x1 JU11x2 JU10 JU6 JU1 JU2 M2 M2x1 LDO4x1 LDO15 PGNDB PGNDBx1 LDO12x1 JU11 VBATT1 GND2 GND2x21 VBAT 1x2 LDO10x1 LDO14 LDO13 LDO13x1 LDO15x1 DATE: ENBx1 VOUTBBx1 ENBBx1 JU14 JU13 JU12 ENL12 JU13x3 JU13x2 JU13x1 LDO11 VOUTBB PGNDBB LDO11x1 JU4x3 LDO14x1 VIO ENL12x1 JU4 JU4x2 JU4x1 M4x1 M4 JU9 JU14x3 JU14x2 JU14x1 JU7x2 JU7x1 JU7 JU8x2 JU8x1 CON1x20 CON1x18 CON1x16 CON1x14 CON1x12 CON1x10 CON1x8 CON1x6 CON1x4 CON1x2 CON1x19 CON1x17 CON1x15 CON1x13 CON1x11 CON1x9 CON1x7 CON1x5 CON1x3 CON1x1 CON1 IRQBx1 SCL SDA SCLx1 JU9x2 JU9x1 MAX77826 EVAL BOARD REV P0 PROPERTY OF INTEGRATED PRODUCTS LAYER Layer 3 PWR ALL UNITS ARE IN 0.001" 3000.000mil M1 GND1 2900.000mil M3 M3x1 SDAx1 IRQB GND3 GND3x2 GND3x1 JU8 JU5 JU5x3 JU5x2 JU5x1 PGNDBBx1 ENBB ENB JU12x3 JU12x2 JU12x1 LDO9x1 LDO12 VOUTB VOUTBx1 LDO10 EXT-INL3x1 JU3x3 JU3x2 LDO8x1 REFBYPx1 LDO5x1 GND1x21 LDO7x1 LDO3x1 LDO1x1 VVBATTx2 BATTx1 VBAT LDO1 LDO3 LDO7 JU3x1 LDO6 REFBYP LDO8 LDO2 LDO5 LDO9 JU3 LDO4 EXT-INL3 LDO6x1 GND4 LDO2x1 GGND4x2 ND4x1 VIOx1 M1x1 JU2x3 JU2x2 JU2x1 JU1x3 JU1x2 JU1x1 JU6x1 JU6x2 JU6x3 JU10x3 JU10x2 JU10x1 JU11x1 JU11x2 JU10 JU6 JU1 JU2 M2 M2x1 LDO4x1 LDO15 PGNDB PGNDBx1 LDO12x1 JU11 VBATT1 GND2 GND2x21 VBAT 1x2 LDO10x1 LDO14 LDO13 LDO13x1 LDO15x1 DATE: ENBx1 VOUTBBx1 ENBBx1 JU14 JU13 JU12 ENL12 JU13x3 JU13x2 JU13x1 LDO11 VOUTBB PGNDBB LDO11x1 JU4x3 LDO14x1 VIO ENL12x1 JU4 JU4x2 JU4x1 M4x1 M4 JU9 JU14x3 JU14x2 JU14x1 JU7x2 JU7x1 JU7 JU8x2 JU8x1 CON1x20 CON1x18 CON1x16 CON1x14 CON1x12 CON1x10 CON1x8 CON1x6 CON1x4 CON1x2 CON1x19 CON1x17 CON1x15 CON1x13 CON1x11 CON1x9 CON1x7 CON1x5 CON1x3 CON1x1 CON1 IRQBx1 SCL SDA SCLx1 JU9x2 JU9x1 MAX77826 EVAL BOARD REV P0 PROPERTY OF INTEGRATED PRODUCTS LAYER Layer4 -Bottom Layer -GND ALL UNITS ARE IN 0.001" 3000.000mil M1 GND1 2900.000mil REV MAX77826 EVAL BOARD P0 PROPERTY OF INTEGRATED PRODUCTS Top SilkScreeen ASSEMBLY DRAWING TOP Layer1-Top Component Layer LAYER DATE: ALL UNITS ARE IN 0.001" JU10 JU6 JU1 JU2 1 2 LDO6 C28 C20 C18 C12 JU4 R2 R1 R1 JU8 IRQB IRQB JU8 ENL12 ENL12 ENBB ENB ENB ENBB 1 1 LDO4 JU3 1 2 3 EXT-INL3 JU14 JU13 JU12 3 3 GND2 MAX77826 EV BOARD 1 WWW.MAXIMINTEGRATED.COM 1-408-601-1000 REVP0-LB-082013 3 JU12 R2 JU7 2 1 PGNDBB GND ENBVBATT JU7 1 VOUTBB JU13 2 R3 C27 LDO2 LDO5 C13 C19 C14 LDO9 VBATT INL3 EXT VBATT1 JU14 JU5 REFBYP LDO8 LDO10 VBATT VOUTBB INL5 LDO11 1 3 VOUTBB VBATT R3 U1 GND ENBB VBATT JU4 1 INL4 3 ENL12 GND VBATT SCL LDO14 JU5 SDA C1 LDO15 GND1 REFBYP C26 C21 C22 LB C26 C11 C28C20C18C12 U1 C16 C2 C7 C11 C27 LB * PGNDB C10 C8 C16 C13 C23 C2 C23 C19 C17 C14 C17 C25 C10 C7 C9 C3 C9 C8 C15 C24 C25 C24 C4C3 C6 C15 C6 C5 LBB LBB LDO13 C4 C5 GND3 SCL C1 MAX SMBUS PCB EDGE CON1 SDA VOUTB LDO12 2 3 3 VIO VOUTB VOUTB LDO7 LDO3 LDO1 JU3 VBATT 2 C21C22 CON1 VBATT 1 JU2 INL2 VBATT 1 3 JU1 INL1 JU10 JU11 GND JU6 CE 2 JU9 JU11 1 C30 C29 JU9 VLOGIC 1 U3 V1P8V 2 2 C29 U3 C30 3 1 VIO VIO VIO GND4 VBATT 3000.000mil 2900.000mil Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Maxim Integrated: MAX77826EVKIT#