Preview only show first 10 pages with watermark. For full document please download

Evgc6a-b - Discover Battery

   EMBED


Share

Transcript

EVGC6A-B DATASHEET Dry Cell Traction Industrial Battery Block BENEFITS & FEATURES Discover® Dry Cell Traction Series provide superior high integrity and reliability for commercial, industrial and private applications. The maintenance-free, thick plate construction, designed for tough applications and repeated deep discharging makes the EV Series the definitive choice for robust Traction applications including Home Medical Equipment (HME), Electric Vehicle, Automated Guided Vehicles (AGV), Aerial Lifts, Floor Cleaning Equipment, Robotics, Materials Handling, Renewable Energy and Marine / RV applications. MECHANICAL DRAWINGS Terminal (AM) Lower specific gravity for reduced heat and cycle life performances. 25 25 C C D C D High impact reinforced copolymer and polypropylene cases with flat top designs. 2 20 B 17 BB 1:9 5/16” A Enhanced alloy Traction heavy duty grids gives consistent active material adhesion and corrosion resistance for longer runtime and extended service life. Higher density active material paste to deliver longer runtimes at high discharge currents. 19.5 (+) | 17.9 (-) A A Advanced battery designs that exceed Original Equipment Manufacturer requirements. Sealed Non-Spillable Maintenance-free technology. D 99.9% gas recombination reduces off gassing and water loss. 40 Multiple battery terminal options and carrying handles available. Excellent for use in environmentally sensitive areas. Optional Terminal (F10-M8) Terminal (F10-M8) 20 2 UL94 recognized flame arresting low pressure safety vents (UL94 V0 rating available). Classified as a non-spillable battery is not restricted for transportation by: • Air (IATA/ICAO provision 67) • Ground (STB, DOT-CFR-HMR49) • Water (IMDG amendment 27) M8 MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS GC6 Industry Reference Voltage 10.2 in Length (A) 260 mm 6V 80% DOD Voltage Cutoff CERTIFIED QUALITY 5.7 V Discover® and its facilities and products are tested and certified to multiple standards: Width (B) 7.1 in 180 mm Internal Resistance Height (C) 10.0 in 254 mm Short Circuit (20°C | 68°F) Total Height (D) 10.8 in 274 mm Self Discharge Less than 3% per month (20˚C|68˚F) Weight 63 lbs 29 kgs Cranking Amps** 885 @ 0˚C (32˚F) AM (F10-M8) Terminal (Opt’l)* 3 Cell(s) Electrolyte 1.2875 S.G. AGM NOTE: There is a tolerance of +/-2%. 1.80 mΩ 3000 A 735 @ -18˚C (0˚F) Charge Temperature Min: -10°C ( 14°F) | Max: 50°C (122°F) Discharge Temperature*** Min: -40°C (-40°F) | Max: 50°C (122°F) Storage Min: -20°C (-4°F) | Max: 60°C (140°F) **CRANKING AMPS: Cranking Amps data is provided as a reference only. Specific application sizing and life factors must be considered when using deep cycle product in a starting application. *TERMINAL TORQUE: Please refer to our document, located in the Resources webpage (www.discoverbattery.com/resources). ***CAUTION: Extra considerations must be given to depths of discharge, operating voltages and currents when designing systems for use at maximum temperatures. ELECTRICAL SPECIFICATIONS Amp Hours (AH) ISO, UL, CE, and QS standards ETTS Germany Euro Bat classification for Environmental Stewardship Standards Designed in accordance with and published in compliance with applicable BCI, IEC and BS EN standards, including: • • • IEC60896-21/22 BS EN 60254-1:2005 AS/NZS 4029.2.2000 Minutes of Discharge 100 HR 20 HR 10 HR 5 HR 3 HR 1 HR @25A @56A @75A @85A @100A 222 207 185 165 150 112 420 156 110 95 77 Maximum Current Peak (5 seconds) Peak (10 seconds) Continuous Recommended Continuous Charge 1C10Hr 0.75C10Hr 0.5C10Hr 0.3C10Hr Discharge 2C10Hr 1.5C10Hr 1C10Hr 0.5C10Hr + 1.778.776.3288 [email protected] Updated: Jan. 1st, 2017 • • • #4 -13511 Crestwood Place, Richmond, BC, V6V 2E9, Canada discoverbattery.com TEMPERATURE EFFECTS ON CAPACITY 800 120% 100% 40% 20% 0% x -20˚C -4˚F -10˚C -14˚F 0˚C 32˚F 10˚C 50˚F 15˚C 60˚F 20˚C 68˚F 25˚C 77˚F 30˚C 86˚F 35˚C 95˚F 40˚C 104˚F 50˚C 122˚F 8V 6V 2V 13.0 8.67 6.50 2.16 12.5 8.33 6.25 2.08 12.0 8.00 6.00 2.00 400 200 x 100% C5 60˚C 140˚F OPEN CIRCUIT VOLTAGE IN RELATION TO THE STATE OF CHARGE (20˚C) 12V Cycles 140% 100% C3 100% C2 75% C3 70% C5 60% C5 7.67 5.75 1.92 11.0 7.33 5.50 1.83 100 Charging is not necessary unless 100% of capacity is required. 5˚C/41˚F 60 40˚C/104˚F 30˚C/86˚F 20 30 40 50 60 70 80 90 100 1 2 4 6 State of Charge (%) 8 10 12 14 Charging before use is necessary to recover full capacity. Charge may fail to restore full capacity. Do not let battery reach this state. 20˚C/68˚F 40 10 30% C10 SELF-DISCHARGE CHARACTERISTICS 80 11.5 50% C10 Depth of Discharge Capacity (%) -0.005VPC °C C = Hour rate (capacity) 1600 160% Open Circuit Voltage (V) ∆V = (T-25°C) x Battery life 180% 60% Please note the voltage settings displayed in the IUI with Pulse Termination Charge Profile graph, corresponds to the set points at 25°C (77°F). For temperatures below 25°C, adjust +0.005VPC/°C (or 0.003VPC per ˚F). For temperatures above 25°C, adjust -0.005VPC/°C (or 0.003VPC per ˚F). Capacity 200% 80% NOTE 2: CYCLE LIFE IN RELATION TO DEPTH OF DISCHARGE (25˚C) Operation not recommended IUI with Pulse Termination algorithm uses a pulse termination criterion. As a safety precaution during the Finish phase, if the average cell voltage, or volts per cell (vpc), exceeds U2 and the charger output has been on for more than 30 seconds, the output is shut off until the vpc falls to U3. The finish phase then resumes and this “pulsing” continues until the target overcharge (108% - 112%) is reached. Operation not recommended NOTE: 16 18 Storage Time (months) IUI WITH PULSE TERMINATION CHARGE PROFILE IUI CHARGE PROFILE An indefinite float phase may be added at 2.27VPC I = Current (Amps) BULK VPC = Volts per Cell ABSORPTION I1 = 0.25C20 (max) 0.10C20 (min) U = Voltage (V) I = Current (Amps) BALANCE BULK U3 = 2.60VPC I1 = 0.25C20 (max) 0.10C20 (min) VPC = Volts per Cell ABSORPTION U2 = 2.37VPC (± 0.05VPC) BALANCE U3 = 2.60VPC U2 = 2.45VPC (+/- 0.015VPC) Dv/Dt = 2.5mV/Cell/Hr or 108%-112% recharge 2.41VPC U = Voltage (V) 108%-112% recharge U3 = 2.35VPC I3 = 0.01C20 I3 = 0.01C20 18 HRS 5 HRS 4 HRS 14 HRS RELATION BETWEEN CHARGING, VOLTAGE AND TEMPERATURE IUU CHARGE PROFILE BULK VPC = Volts per Cell ABSORPTION U = Voltage (V) U2 = 2.45VPC (+/-0.015VPC) U3 = 2.27VPC 8 HRS 12V 8V 6V 2V 15.6 10.4 7.8 2.6 15.0 10.0 7.5 2.5 14.4 9.6 7.2 2.4 13.8 9.2 6.9 2.3 BALANCE I1 = 0.25C20 (max) 0.10C20 (min) 14 HRS 4 HRS Maximum Charge Time (Must be Limited to 24 Hrs) Maximum Charge Time (Must be Limited to 24 hrs) I = Current (Amps) 5 HRS Cy cle Stan dby 13.2 8.8 6.6 2.2 -10˚C 14˚F NO TIME LIMIT Maximum Charge Time (Must be Limited to 24 hrs) 0˚C 10˚C 32˚F 50˚F Us e Use 20˚C 30˚C 40˚C 50˚C 60˚C 68˚F 86˚F 104˚F 122˚F 140˚F Ambient Temperature (˚C) Discover® attempts to ensure the correctness of the product description and data contained herein. We reserve the right to change designs, specifications and pricing at any time without notice or obligation. It is the responsibility of the reader of this information to verify any and all information presented herein. Updated: Jan. 1st, 2017 #4 -13511 Crestwood Place, Richmond, BC, V6V 2E9, Canada + 1.778.776.3288 [email protected] discoverbattery.com